HELLO! I had acura rom 7.1...i flashed the new rom Acura newline v3 and after i install the baseband v10k but if i boot the phone it reboots continuosly! PLEASE HELP ME!!
wipe your data/factory reset.
i did it 3 times but nothing!
marcoasroma said:
i did it 3 times but nothing!
Click to expand...
Click to collapse
Flash the v10k kdz then root and flash the rom worked for me...
search SetCpu or nfrills cpu and LOWER the OC.
the rom is overclocked at 1300mhz, and i don't think that our 3d can handle that much oc.
costi
bestiuta said:
search SetCpu or nfrills cpu and LOWER the OC.
the rom is overclocked at 1300mhz, and i don't think that our 3d can handle that much oc.
costi
Click to expand...
Click to collapse
How can he do that if his phone restarts constantly lol...
Exactly after install skip the setup and go to setcpu and set lower oc.i think we need to edit the values for max cpu frec at boot,probably init.d or build.prop? I will search and see.
Sent from my LG-P920 using XDA App
i got he same problem too
how can we lower the default CPU freqeuncy at boot but not in setcpu
any suggestion is found!?
thx all
Related
please tell me how to overclock my phone im using creeds rom v3.0. when i set the frequency in no frills cpu control at 819 mhZ its asking me for rebooting the phone and even after rebooting its coming again to stock frequency please help..
tejkumarvusirikala said:
please tell me how to overclock my phone im using creeds rom v3.0. when i set the frequency in no frills cpu control at 819 mhZ its asking me for rebooting the phone and even after rebooting its coming again to stock frequency please help..
Click to expand...
Click to collapse
Your phone cant handle that, low your mhz, when it set right your phone doesnt reboot.
try another low freq about 700+
Does anyone have battery.drain problem with creeds ROM or its me only? Version 3.1 with ics theme on
galaxyfitankit said:
Does anyone have battery.drain problem with creeds ROM or its me only? Version 3.1 with ics theme on
Click to expand...
Click to collapse
Me too... still trying to flash some battery tweaks..
Sent from my GT-S5670 using xda premium
Hello world. I'm running faux 004 but when I try to mess with my CPU limits with SetCpu etc. It only goes up to 1.51. What do I have to do to make higher speeds available?
FrenzyGr said:
Hello world. I'm running faux 004 but when I try to mess with my CPU limits with SetCpu etc. It only goes up to 1.51. What do I have to do to make higher speeds available?
Click to expand...
Click to collapse
the kernel wont have higer speeds try bricked kernel n cpu master free
Sent from my Sensation using xda premium
FrenzyGr said:
Hello world. I'm running faux 004 but when I try to mess with my CPU limits with SetCpu etc. It only goes up to 1.51. What do I have to do to make higher speeds available?
Click to expand...
Click to collapse
try system tuner to overclock your processor...it works with faux 004 (also if you want performance change the governer to ondemand. its possible with system tuner too)
janarioo said:
the kernel wont have higer speeds try bricked kernel n cpu master free
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
Each kernel has a range of frequencies built in, check the specification before you flash to get the range you want. All of the CPU management apps can only work within the ranges defined in the kernel.
sent from HTC Pyramid using Tapatalk 2
Try the new Bricked kernel. You can easily set the maximum and minimum frequencies simply by renaming the ZIP file. Use Recovery to flash. Setting CPU frequencies was never that easy!
I would say try bricked (like aayush mentioned). As he said, you can change the clock speeds by renaming the zip file (up to 1,944 Ghz, but only if your phone can handle it, so I would suggest that you first use "System Tuner" to test how high you can go with oc).
try searching for a kernel that supports hiigher clock rate
for example when flashing arhd it asks you about the kernel you want and not sure wich one can go to 1.7ghz or more
http://www.google.com/url?sa=t&rct=...xOjqCQ&usg=AFQjCNFPmCXITLZFHlmL0XotkhrO8YRVEQ
janarioo said:
the kernel wont have higer speeds try bricked kernel n cpu master free
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
I agree...with bricked kernel, you can set CPU min/max....
I tried Bricked at 1.83 and works like a charm. Tried at 1.99 but after a minute or so my phone rebooted so I'm back to the more stable 1.83 and the battery is amazing!
Sent from my HTC Sensation XE using Tapatalk 2
Hello frends i am new to htc explore(not new to android).i am using stock indian rom with default kernel.i already rooted my rom.i want a kernel which work in stock rom and have NO bug and support ext partition and overclockable to more than 600mhz.thanks guys.
Welcome, there is no such kernel, mostly they are only 3 kernels for explorer, non of them works fine on stock rom, If you want stock, closest you can do is Ateeq's rom, then to clock it you have to flash yannou's kernel, which has OC but most of the guys sayed that it is fake OC, I think not but....... I'm a noob. So far what I figure out is cranium kernel, whit that you can clock it to 1307 which is fun for a while, but battery is just diyng with full clock. All of them supports ext partition.
Thanks.so cranium kernel work with stock Tom.
I have my doubts, anyway do a backup and try, I'm sure about yannou's and ateeq's they don't work with stock, when I tryed cranium, I've already forgot what stock was, so don't know but nowhere says that it wont, so it's up to you. My doubts are about stock, ti's odexed and that's why I'm not sure will it work corectly.
No kernels work with stock....only on custom roms..
my htc
Ok guys i want to install custom rom.plz suggest me a custom rom(ics based)?aokp or cm9?and what is the safe max frequency that we can overclock our phone?thanks
vikasb32 said:
Ok guys i want to install custom rom.plz suggest me a custom rom(ics based)?aokp or cm9?and what is the safe max frequency that we can overclock our phone?thanks
Click to expand...
Click to collapse
I personally recommend to try CM9, I've installed it yesterday and I can say there wasn't bugs(oh yeah, there was something, when I used phone in USB storage mode(plugged in to computer) Google Play wasn't working properly, it was force closing on the app startup. But this is nothing).
Ok thanks.can you tell me what is the max frequency which our phone can hold without any kernel panic.??
vikasb32 said:
Ok thanks.can you tell me what is the max frequency which our phone can hold without any kernel panic.??
Click to expand...
Click to collapse
Sorry, exactly now, I'm using default CM9 kernel, so I can't say that.
So default cm9 kernel is not overclockable?i assume that all custom rom have overclockable kernel?
vikasb32 said:
So default cm9 kernel is not overclockable?i assume that all custom rom have overclockable kernel?
Click to expand...
Click to collapse
I thought it too, but setCPU shows max clock 600Mhz.
zgintasz said:
I thought it too, but setCPU shows max clock 600Mhz.
Click to expand...
Click to collapse
Ok then its not overclockable.i will check.thanks
Oc is not a gud idea..du to hvy battery drain..cm9 with oc is available..but not a stable one...
my htc
i flashed an init.d script... how do i clear it..
because of it my cpu runs at max frequency all the time.. tried changing kernels and governors..
any help would be appreciated..
on stock rom, matrix23.5. .
siddhesh.raikar said:
i flashed an init.d script... how do i clear it..
because of it my cpu runs at max frequency all the time.. tried changing kernels and governors..
any help would be appreciated..
on stock rom, matrix23.5. .
Click to expand...
Click to collapse
Just delete that init.d script
Sent from SpeedMachine i9023
On LG l3 II (have the samy cpu) i can overclock it to 1400. Can i OC htc pico to 1400MHz?? It's posibble?
Ps: I know i can burn my nand but this is only question.
it wld nt only burn ur nand..also ur phone will b burnt.. :laugh:
check this video out dude i think its possible
vijnathin said:
check this video out dude i think its possible
Click to expand...
Click to collapse
try your luck with pandora extreme kernel..it supports overclock upto 900mhz..& I think cranium kernel 1.3ghz overclock is fake(no offense to the developer) because it gives lower benchmark as compared to pll2 overclock kernels.
Try it
You can try it one last time... (I think)
Now i Oc my phone to 844MHz. It's possible to OC the phone up to 1300MHz? My phone don't will burn?
michal16 said:
Now i Oc my phone to 844MHz. It's possible to OC the phone up to 1300MHz? My phone don't will burn?
Click to expand...
Click to collapse
you can use cranium kernel with jaggyrom, it'll work but the performance won't be as good as you're getting now because this is pll2 true overclock you are using now..you're lucky you got your pico working stable @844mhz, mine can't go above 767mhz.
I think its not possible ,i checked the specification of MSM 7225A chipsets,the maximum cpu clock frequency for them is 800 Mhz (official) u can overclock them a bit but 1400 Mhz is too high ....
sent from
little pico
Look at the LG l3 II. This phone have the same CPU and have 1GHz. On this phone you can overclock up to 1400MHz.
Ok i don't will test I have SDHC class 4 but i can OC up to 844MHz strange
I have next question(i didn't want doing spam) My phone is increasingly slowly. I think its NAND. I OC my ophone only one of week (on one hour) and normally working at 600 MHz. What i can do?
Ok. I have aries kernel with one partion and this laggy. Now i shearch kernel for CM10.1. I have only one partion made in recovery and this kernel must overclock pll2
michal16 said:
Ok. I have aries kernel with one partion and this laggy. Now i shearch kernel for CM10.1. I have only one partion made in recovery and this kernel must overclock pll2
Click to expand...
Click to collapse
use two external partitions for pll2 overclocking..why can't you follow developer's instruction?
i can't do it.