Hey, i am running on infused v2.1.0 and i have transfuzion theme. Anyway i tried to flash the kernel and i thought i did it right went to recovery mode then falsh zip from sd watever then reboot consol. i go back to my About Phone and still no infusion 1.1 it says : Kernel Version 2.6.35.7-I1997RUXKG-3-CL366622... Any help would be appreciated ! Thank you for your time .
IrInfuseD said:
Hey, i am running on infused v2.1.0 and i have transfuzion theme. Anyway i tried to flash the kernel and i thought i did it right went to recovery mode then falsh zip from sd watever then reboot consol. i go back to my About Phone and still no infusion 1.1 it says : Kernel Version 2.6.35.7-I1997RUXKG-3-CL366622... Any help would be appreciated ! Thank you for your time .
Click to expand...
Click to collapse
I'm pretty sure that is the Infusion kernel. If you read the rest it should say [email protected] # infusion gb
I'd suggest downloading Voltage Control and seeing what options you have in there. You'll know you installed it correctly if you see speeds up to 1600 in there. Plus it's a good tool if you want to Under Voltage a little bit to help on battery life.
Kernel Version number is 2.6.35.7-1997RUXKG3-CL366622 for infusion 1.1. Your good.
TheCajun said:
Kernel Version number is 2.6.35.7-1997RUXKG3-CL366622 for infusion 1.1. Your good.
Click to expand...
Click to collapse
Actually that version string is useless for determining which kernel you're running other than "based on Rogers Gingerbread" - since the proprietary Samsung modules force kernel devs to avoid doing anything that modifies that string. (Modify that string = device will not boot.)
The best way to figure out which kernel you're running are:
1) Featureset. If you have frequencies higher than 1200 MHz you're running Infusion as it's the only overclock kernel there is. If you have netarchy-style voltage control but no overclock, you're likely on my Daily Driver. If you have neither, you're probably on Hellraiser or the stock Infused ROM kernel.
2) Build username/host of the kernel to determine who built it. If you look back through my posts you should find one with a list of a few known user/host combos for various kernel devs.
Thanks for the replies guys! I checked in my voltage control i have the 1600mhz in there but i dont really know how to set them... ive looked around i did something but im not sure if thats the best set up. I sitll do not know if i am running on infusion 1.1 i have infused 2.1 for sure but not sure about the kernel. Anyway thanks for the reply guys the help is much appreciated but IF you can help me figure out this voltage thing it'll be great! Also i have downloaded the tranzfusion theme and i dont really like it is there anyway i can delete it?
Entropy512 said:
Actually that version string is useless for determining which kernel you're running other than "based on Rogers Gingerbread" - since the proprietary Samsung modules force kernel devs to avoid doing anything that modifies that string. (Modify that string = device will not boot.)
The best way to figure out which kernel you're running are:
1) Featureset. If you have frequencies higher than 1200 MHz you're running Infusion as it's the only overclock kernel there is. If you have netarchy-style voltage control but no overclock, you're likely on my Daily Driver. If you have neither, you're probably on Hellraiser or the stock Infused ROM kernel.
2) Build username/host of the kernel to determine who built it. If you look back through my posts you should find one with a list of a few known user/host combos for various kernel devs.
Click to expand...
Click to collapse
Sorry didnt know this, thanks for the correction. I dont like giving people bad info.
---------- Post added at 10:05 PM ---------- Previous post was at 09:58 PM ----------
IrInfuseD said:
Thanks for the replies guys! I checked in my voltage control i have the 1600mhz in there but i dont really know how to set them... ive looked around i did something but im not sure if thats the best set up. I sitll do not know if i am running on infusion 1.1 i have infused 2.1 for sure but not sure about the kernel. Anyway thanks for the reply guys the help is much appreciated but IF you can help me figure out this voltage thing it'll be great! Also i have downloaded the tranzfusion theme and i dont really like it is there anyway i can delete it?
Click to expand...
Click to collapse
If you installed 1.1 and voltage control tells you can OC to 1600 then you have 1.1 installed. People use different setups for the Overclocking. use Cfq as scheduler and Ondemand as governor. make sure you turn on 1600 by hitting the red button next to it if you already havent. dont use more than 5-6 mhz speeds at one time. I use 200 400 800 1200 1600.
Just to the OP...the easiest way to me to flash a kernel is simply by downloading SGS Kernel Flasher, selecting the kernel, and flashing it. It's about as painless as you can get.
Thanks for the replies guys much appreciated !
Related
Hi,
I am a new rooted user and have been following all MT4G threads here at XDA pretty closely. Can anyone help me know which kernels I can flash on the 03012011 Nightly(cm_glacier_full-11.zip ). I haven't ever flashed a kernel and I don't know what it does and how it helps.
I'll appreciate any info that you can give me.
dipsy1849 said:
Hi,
I am a new rooted user and have been following all MT4G threads here at XDA pretty closely. Can anyone help me know which kernels I can flash on the 03012011 Nightly(cm_glacier_full-11.zip ). I haven't ever flashed a kernel and I don't know what it does and how it helps.
I'll appreciate any info that you can give me.
Click to expand...
Click to collapse
Well you can use dumfuq's SmartCMKernel or Faux's CM7RC v1.3 kernels. ATM you might want to go with dumfuq's as its the most stable CM7 kernel other than default. You can find it in development section, once downloaded to SDCard just go in to Recovery and wipe cache, davlik and then Install zip from SDCard> Choose from SDCard> Select it wherever you put it and then flash it as you normally flash rom's. Then reboot and let it run for few min and let it do its thing.
BlackSHELF said:
Well you can use dumfuq's SmartCMKernel or Faux's CM7RC v1.3 kernels. ATM you might want to go with dumfuq's as its the most stable CM7 kernel other than default. You can find it in development section, once downloaded to SDCard just go in to Recovery and wipe cache, davlik and then Install zip from SDCard> Choose from SDCard> Select it wherever you put it and then flash it as you normally flash rom's. Then reboot and let it run for few min and let it do its thing.
Click to expand...
Click to collapse
Which is the dumfuq's kernel . I hear it reffered in threads but I cant seem to find it.
Thanks
dipsy1849 said:
Which is the dumfuq's kernel . I hear it reffered in threads but I cant seem to find it.
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=930961
Its very stable I virtually tested them all and this seem to be THE one, for now till Faux come down to CM7 world.
BlackSHELF said:
http://forum.xda-developers.com/showthread.php?t=930961
Its very stable I virtually tested them all and this seem to be THE one, for now till Faux come down to CM7 world.
Click to expand...
Click to collapse
Thanks for your help. Getting this kernel now. I heard about setcpu and Quadrant. Do I need those and how/what are they used for? what kind of difference would this kernel give me?
SetCPU - name explains it but if you don't know its controls clock frequency, so you can over/under clock and even set profiles.
Quadrant - benchmark app its just to brag how high score you got nothing special, don't let it get to your head it means nothing as the synthetic benchmark no way translate in to real world performance its just pissing contest lol
Keep in mind in CM7 you have built in mCPU performance controller to to handle clock frequency which you can access via Setting> CM Setting> Performance> CPU Setting.
BlackSHELF said:
SetCPU - name explains it but if you don't know its controls clock frequency, so you can over/under clock and even set profiles.
Quadrant - benchmark app its just to brag how high score you got nothing special, don't let it get to your head it means nothing as the synthetic benchmark no way translate in to real world performance its just pissing contest lol
Keep in mind in CM7 you have built in mCPU performance controller to to handle clock frequency which you can access via Setting> CM Setting> Performance> CPU Setting.
Click to expand...
Click to collapse
Thanks Blackshelf. I am on that kernel now. What should my min and max be? and should the set on boot be set to yes?
What is Linpack?
dipsy1849 said:
Thanks Blackshelf. I am on that kernel now. What should my min and max be? and should the set on boot be set to yes?
Click to expand...
Click to collapse
You do relize you allready have a aftermarket kernel installed when you download any Rom here in the forums, right? Its ok to install different ones but FYI you dont need to in order to overclock.
TrueBlue_Drew said:
You do relize you allready have a aftermarket kernel installed when you download any Rom here in the forums, right? Its ok to install different ones but FYI you dont need to in order to overclock.
Click to expand...
Click to collapse
not past 1504Mhz though...
dipsy1849 said:
Thanks Blackshelf. I am on that kernel now. What should my min and max be? and should the set on boot be set to yes?
Click to expand...
Click to collapse
Thats up to you as only you know what you use so you can better utilize the resource. I mean if you don't use anything no reason to OC it to 1.8ghz lol that way you will kill battery.
BlackSHELF said:
http://forum.xda-developers.com/showthread.php?t=930961
Its very stable I virtually tested them all and this seem to be THE one, for now till Faux come down to CM7 world.
Click to expand...
Click to collapse
What are the differences between dumfuq's and faux's? Is there an advantage to one over the other? I've always been using faux's the whole time.
I keep going back to just using the stock CM 7 kernel clocked at 1.5 honestly I think it gives the best overall performance (on my phone at least) and honestly I had issues running over anything past 1.7 with any kernel but again that could just be my phone. I had it oc'ed at 1.7 for a while and now I have it clocked at 1.5 and notice I have less FC (not that I had many at 1.7 but def more apps would choke from time to time) This phone is pretty fast bone dry stock with no oc'ing but it runs beautiful at 1.5. I dont really notice much performance difference from 1.5 to 1.7 but I do notice a battery difference
Has anyone been successfull? i have tried every OC kernel and as soon as i overclock it just reboots my phone to a freeze (only way out is to either pull the battery or adb reboot). That being said the UV kernel runs fine.
Not sure if it has to do with the I9020A series.
But overall, each NS phone can tolerate its own OC levels. Some phones can tolerate only up to 1.2 GHz, some may be able to achieve 1.4GHz (or beyond). And for some of the unfortunate, some aren't able to OC at all.
Thus this post. I hope my phone is'nt the issue. it would be nice to push a little bit more out of it if i needed it down the line.
I over clocked mine to 1.4 and it was fine, I leave it at 1.0 tho, this friggin thing is quick enough for now.
hmm how do you check your radio. I'm gonna try that as a last resort. And i can set mine as 1.4 but as soon as i run a resource heavy task (n64) my phone locks up and reboot freezes.
themapleboy said:
hmm how do you check your radio. I'm gonna try that as a last resort. And i can set mine as 1.4 but as soon as i run a resource heavy task (n64) my phone locks up and reboot freezes.
Click to expand...
Click to collapse
Not sure why a radio would affect your ability to OC but...
Menu -> Settings -> About Phone -> Baseband Version
the last 3 are what you want to look at "JK8/KB1/KB3"
List all the kernels you've tried. The best in my opinion is Netarchy's 1.3.0.3-CFS kernel using SetCPU
Try intervals of 1.2 GHz too. My phone can only go up to 1.2 GHz
Yeah actually i had tried all of the bfs kernels. I just succeeded in getting Netarchy's 1.3.0.3-CFS kernel. And i can run up to 1.4 . Maybe the brain fk scheduler does not play nice with 9020a's
themapleboy said:
Yeah actually i had tried all of the bfs kernels. I just succeeded in getting Netarchy's 1.3.0.3-CFS kernel. And i can run up to 1.4 . Maybe the brain fk scheduler does not play nice with 9020a's
Click to expand...
Click to collapse
awesome. I just prefer CFS because with BFS the boot animation doesn't show, and it bothers me.
zephiK said:
awesome. I just prefer CFS because with BFS the boot animation doesn't show, and it bothers me.
Click to expand...
Click to collapse
i flashed the BFS first, and lost my boot animation. Then i switched to the CFS, and the boot animation still didnt appear.
Any ideas as to how i can get it back?
Also, is there anyway to recover the stock kernel? I'd like to have it handy to be able to go back to it.
thnks
mixxy said:
i flashed the BFS first, and lost my boot animation. Then i switched to the CFS, and the boot animation still didnt appear.
Any ideas as to how i can get it back?
Also, is there anyway to recover the stock kernel? I'd like to have it handy to be able to go back to it.
thnks
Click to expand...
Click to collapse
Wipe dalvik and cache. Flash a rom that flashes stock. Like cm7 but netarchys is so much better than stock
You can also get ogdobbers which is stock + ext4 + voodoo.
Sent from my Nexus S using XDA Premium App
Hey everyone,
This is an off topic question but does anyone know what happened to the 1.6 OC support for Netarchy? I loved to see the absurdly high quadrant scores and instantaneous screen transitions.
Thanks,
Justin
JTECJ said:
Hey everyone,
This is an off topic question but does anyone know what happened to the 1.6 OC support for Netarchy? I loved to see the absurdly high quadrant scores and instantaneous screen transitions.
Thanks,
Justin
Click to expand...
Click to collapse
you're better off asking that in the netarchy kernel thread in dev forums.
netarchy could answer that... not a lot of phones can tolerate 1.6 GHz Oc
Thanks, yeah i felt a little bad posting the question here. Though ive been an avid user for a long time i have never posted so i didnt have sufficient rites to post in the decelopment section yet : (
Justin
Sent from my Nexus S using XDA Premium App
zephiK said:
Wipe dalvik and cache. Flash a rom that flashes stock. Like cm7 but netarchys is so much better than stock
You can also get ogdobbers which is stock + ext4 + voodoo.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
so cm7 flashes the stock kernel?
mixxy said:
so cm7 flashes the stock kernel?
Click to expand...
Click to collapse
yep! low on bugs and freezes but no voodoo or bln.. dammit
Using QuikWiz with whatever kernel is included with that ROM (Da_G's, IIRC), I pretty much can't OC at all. I'm stuck at the default 1566MHz, the closest bump up at 1728 is too high and my phone crashes. I just flashed TPCv3 which also uses Da_G's kernel and came to the same result - can't OC past 1566MHz.
Firstly, is there anything I can do to make my phone stable at 1728MHz? What do you guys have your phones set to?
Quadrant/AnTuTu screenshots welcome.
zxrax said:
Using QuikWiz with whatever kernel is included with that ROM (Da_G's, IIRC), I pretty much can't OC at all. I'm stuck at the default 1566MHz, the closest bump up at 1728 is too high and my phone crashes. I just flashed TPCv3 which also uses Da_G's kernel and came to the same result - can't OC past 1566MHz.
Firstly, is there anything I can do to make my phone stable at 1728MHz? What do you guys have your phones set to?
Quadrant/AnTuTu screenshots welcome.
Click to expand...
Click to collapse
Stock ROM here.. run 1728/1782 all the time.. no issues.. Don't have any screenshots, but get 3900+ quadrant, 6700+ Antu and 7800 CFbench. No sod's.. get 24+battery life .. its lovely.
Hello, I'm brand new to all of these roms and such, I've got a rooted 2.2.2 froyo g2x/lgP999. I am interested in getting a rom and a kernel. I am interested in getting ginger bread 2.3.3 and overclocking along with more battery life and a theme. Could I be linked to tutorials and suggested roms/kernels, and I have looked around but i really have no idea what im looking at so please don't say you've done nothing and are making us do all your work :\
rasdabess said:
Hello, I'm brand new to all of these roms and such, I've got a rooted 2.2.2 froyo g2x/lgP999. I am interested in getting a rom and a kernel. I am interested in getting ginger bread 2.3.3 and overclocking along with more battery life and a theme. Could I be linked to tutorials and suggested roms/kernels, and I have looked around but i really have no idea what im looking at so please don't say you've done nothing and are making us do all your work :\
Click to expand...
Click to collapse
if i am sure overclocking would kill your battery but im not sure. i would recomend Weapong2x 3.0 is the best rom our there
Hi there,
If you don't have cwm recovery installed on your phone follow the instructions on this thread http://forum.xda-developers.com/showthread.php?t=1056847 to flash it.
Then pick one of the following 2.3.3 roms and flash it following the instructions provided on the thread:
http://forum.xda-developers.com/showthread.php?t=1400620
http://forum.xda-developers.com/showthread.php?t=1207125
http://forum.xda-developers.com/showthread.php?t=1139832
http://forum.xda-developers.com/showthread.php?t=1280047
http://forum.xda-developers.com/showthread.php?t=1380987
http://forum.xda-developers.com/showthread.php?t=1348635
http://forum.xda-developers.com/showthread.php?t=1199304
There might be more 2.3.3 roms available in the development section, also you might wanna consider flashing a 2.3.7 rom, if so check out the development section and pick one, or try several roms and pick whichever one you like most. Devs are more active with 2.3.7 roms, so you'll find better support and more features.
As for the kernels, you can usually overclock your CPU with any custom rom (provided you get the appropriate app from the market if there are no OCing options built into the rom), but I haven't used a 2.3.3 rom in a long time so I'm not sure if OCing is available with the stock kernels they come with. If you do go with a 2.3.5 (or above, namely 2.3.7) rom then you can try either:
Morfic's kernel http://forum.xda-developers.com/showthread.php?t=1078049
or Faux's kernel http://forum.xda-developers.com/showthread.php?t=1073626
They're both excellent kernels, Trinity (Morfic's kernel) has a known issue with rebooting, the phone will freeze every now and then when you try to reboot so you'd have to do a battery pull.
Faux's kernel doesn't have that issue, but, for me at lease, when trying to reboot into recovery it does a normal reboot instead.
As you might already know, the G2X has a somewhat crappy battery life, most people can't get more than 24-30 hours of battery life with the stock battery, and from what I read most of the custom batteries aren't as good as advertised, so your best bet is to use an under volted kernel and try to find some battery tweaks in the forums.
There's way too many themes to list here but basically, for CM7 roms you can look for themes in the market, and for MIUI themes you can use their themes app to find something suitable.
All credit goes to the devs for their hard, and much appreciated, work, don't forget to hit the thanks button where ever appropriate, and/or leave a thanks comment
A note on overclocking:
Please know that not all phones respond the same when overclocked. In other words, some phones can't handle the same overclock speed as other phones. And also note that overclocking sacrifices a bit of battery life to increase the performance, the extra juice has to come from somewhere. I suggest starting from the stock kernel of whichever rom you choose, see how your phone does on a stock, unmodded kernel. If you want a little more performance, then you can flash a custom one and slowly increase clock speed over time to see how your phone responds. If you want more battery life, then you should read up on UV (undervolting) settings in the custom kernel. The key is to try and find a nice combination of both so you can benefit great battery life and performance, but requires some tinkering and testing to get that right combination. Just something to note.
Phoenix Blood 1.7 with Faux123 048 kernel is the way to go. Do some reading on Google how to nvflash cwm and do a Android backup. Also titanium backup your applications and your golden.
Making bad decision's one at a time.
jj_z1 said:
Hi there,
If you don't have cwm recovery installed on your phone follow the instructions on this thread http://forum.xda-developers.com/showthread.php?t=1056847 to flash it.
Then pick one of the following 2.3.3 roms and flash it following the instructions provided on the thread:
http://forum.xda-developers.com/showthread.php?t=1400620
http://forum.xda-developers.com/showthread.php?t=1207125
http://forum.xda-developers.com/showthread.php?t=1139832
http://forum.xda-developers.com/showthread.php?t=1280047
http://forum.xda-developers.com/showthread.php?t=1380987
http://forum.xda-developers.com/showthread.php?t=1348635
http://forum.xda-developers.com/showthread.php?t=1199304
There might be more 2.3.3 roms available in the development section, also you might wanna consider flashing a 2.3.7 rom, if so check out the development section and pick one, or try several roms and pick whichever one you like most. Devs are more active with 2.3.7 roms, so you'll find better support and more features.
As for the kernels, you can usually overclock your CPU with any custom rom (provided you get the appropriate app from the market if there are no OCing options built into the rom), but I haven't used a 2.3.3 rom in a long time so I'm not sure if OCing is available with the stock kernels they come with. If you do go with a 2.3.5 (or above, namely 2.3.7) rom then you can try either:
Morfic's kernel http://forum.xda-developers.com/showthread.php?t=1078049
or Faux's kernel http://forum.xda-developers.com/showthread.php?t=1073626
They're both excellent kernels, Trinity (Morfic's kernel) has a known issue with rebooting, the phone will freeze every now and then when you try to reboot so you'd have to do a battery pull.
Faux's kernel doesn't have that issue, but, for me at lease, when trying to reboot into recovery it does a normal reboot instead.
As you might already know, the G2X has a somewhat crappy battery life, most people can't get more than 24-30 hours of battery life with the stock battery, and from what I read most of the custom batteries aren't as good as advertised, so your best bet is to use an under volted kernel and try to find some battery tweaks in the forums.
There's way too many themes to list here but basically, for CM7 roms you can look for themes in the market, and for MIUI themes you can use their themes app to find something suitable.
All credit goes to the devs for their hard, and much appreciated, work, don't forget to hit the thanks button where ever appropriate, and/or leave a thanks comment
Click to expand...
Click to collapse
Thank you all for the fast response.
Now I have a question, are kernels used to acheive anything other than overclocking/undervolting? And are there any for 2.3.3 roms, if so which would you recommend?
rasdabess said:
Thank you all for the fast response.
Now I have a question, are kernels used to acheive anything other than overclocking/undervolting? And are there any for 2.3.3 roms, if so which would you recommend?
Click to expand...
Click to collapse
Yes, your phone won't function without the kernel (obviously) and custom kernels are better than the stock one in that (in simple words) they improve performance and power consumption (kinda like drivers for computer parts).
I think the following would work for 2.3.3 roms, do a nandroid backup and try it, if it doesn't work just restore
http://forum.xda-developers.com/showthread.php?t=1246419
http://forum.xda-developers.com/showthread.php?t=1102720
shadowpr2007 said:
if i am sure overclocking would kill your battery but im not sure.
Click to expand...
Click to collapse
I get better battery life on Eaglesblood 2.3.7 and Trinity ELP kernel (overclocked to 1.1GHz, normal is 1.0) than a stock based rom, like Weapon, will ever get. And on T15 kernel at 1.56 I can still get pretty damn good battery.
IRASadPanda said:
I get better battery life on Eaglesblood 2.3.7 and Trinity ELP kernel (overclocked to 1.1GHz, normal is 1.0) than a stock based rom, like Weapon, will ever get.
Click to expand...
Click to collapse
+1
Cm based roms > ota based roms for battery life
Pin it to Win it.
IRASadPanda said:
I get better battery life on Eaglesblood 2.3.7 and Trinity ELP kernel (overclocked to 1.1GHz, normal is 1.0) than a stock based rom, like Weapon, will ever get. And on T15 kernel at 1.56 I can still get pretty damn good battery.
Click to expand...
Click to collapse
Cant seem to find the t15 kernel, not in the kernel list.
I run overclocked to 1.6 with a pretty aggressive undervolt. With the right profiles in setcpu I get better than stock battery and very very good performance.
Sent from my LG-P999 using XDA App
rasdabess said:
Cant seem to find the t15 kernel, not in the kernel list.
Click to expand...
Click to collapse
Go to http://www.derkernel.com/ and look under current G2x kernels for 2.3.5 builds. There's ELPmax, T15max, and TD158. Don't flash any of these kernels if you're on a 2.3.3 rom though. Good luck
r.snyder said:
I run overclocked to 1.6 with a pretty aggressive undervolt. With the right profiles in setcpu I get better than stock battery and very very good performance.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
That is impressive but i would defiantly not recommend doing that if you are just starting... That can cause extreme instability...
If you want to undervolt start small and work your way up in increments making sure to not have the settings to "Apply on boot" that way if you get a crash (And you will until you find the sweet spot) you wont be stuck with your phone crashing over and over because the cpu/kernel is freaking out
And SetCPU is a great program for OC/UV for any rom
question i cant seem to quickly find about undervolting:
when undervolting in pimpmycpu (SetCPU crashes on me when I go to voltage settings for whatever reason) do you undervolt each setting? Like -50mv for 1.4GHz, -50mv for 1.2Ghz, -50mv for 1Ghz etc etc etc.. or just -50mv for the top (1.4Ghz) setting?
Oh, I'm on Faux's 048 kernel..
brockmo said:
question i cant seem to quickly find about undervolting:
when undervolting in pimpmycpu (SetCPU crashes on me when I go to voltage settings for whatever reason) do you undervolt each setting? Like -50mv for 1.4GHz, -50mv for 1.2Ghz, -50mv for 1Ghz etc etc etc.. or just -50mv for the top (1.4Ghz) setting?
Oh, I'm on Faux's 048 kernel..
Click to expand...
Click to collapse
You only undervolt the clock speed you're using, you can do it for both min and max values, or just for one. But if you use multiple OC profiles, then you can UV every clock speed you're using.
Either way, UVing all clock speeds shouldn't cause any issues, but it wouldn't help much
I came from the Hercules and I'm currently running Dewizzled 2.5 with Da_G's .42 kernel. If I use system tuner, it has no affect on the cpu... CPU tuner made my phone go into bootloop, and SetCPU makes it restart as soon as I go past 1.62ghz. With my hercules I had no problem running it at 1.89ghz
Hrm thats bizarre on cpu tuner and setcpu... have you tried the .42 with another rom? Also, if your able to use Da_g .42 without any SoD's (sleep of death) then you should really use Da_g .43 as it fixes an init script problem, which is likely why you werent seeing changes with system tuner. Seems alot of people have SoD's with various stock roms on Da_g's post .3 versions... so if you flash another rom and then start having them either flash .3 or change back to your working rom.
.43 Can be found here: http://forum.xda-developers.com/showpost.php?p=20090801&postcount=462
System tuner and setcpu also seem to force the second core online all the time, so its been highly recommended that you use a script to set the o'clock and such. Instructions are here, or if your not too saavy can use twopumpchump's pre-made version which is CWM flashable. (here)
It seems every cpu app I've tried revert the kernel back to it's stock settings. Faux's kernel is 384-1720 (I think) by default. I wish it was 192 as default. Every time I open up system tuner pro, setcpu, fauxclock, rom toolbox pro.....they don't stick. If anyone has a way of making it stick I know I'd appreciate it. Even if I choose set on boot it doesn't.
sulpher said:
Hrm thats bizarre on cpu tuner and setcpu... have you tried the .42 with another rom? Also, if your able to use Da_g .42 without any SoD's (sleep of death) then you should really use Da_g .43 as it fixes an init script problem, which is likely why you werent seeing changes with system tuner. Seems alot of people have SoD's with various stock roms on Da_g's post .3 versions... so if you flash another rom and then start having them either flash .3 or change back to your working rom.
.43 Can be found here: http://forum.xda-developers.com/showpost.php?p=20090801&postcount=462
System tuner and setcpu also seem to force the second core online all the time, so its been highly recommended that you use a script to set the o'clock and such. Instructions are here, or if your not too saavy can use twopumpchump's pre-made version which is CWM flashable. (here)
Click to expand...
Click to collapse
Thanks I'll flash that and see if it works I have a feeling that it's the mixture of Dewizzled and Da_G lol and I love TDJ's Darkside kernel but right now it's only available for the Hercules so it'll cause the screen orientation issue. Hopefully he'll make a port for the Skyrocket
I had the same problem but on coke rom with faux.. So I flashed the giedion script.. And now it seem to hold and go now deep sleep, and check it out in the faux kernel section in the development section.
Sent from my Xoom using xda premium
I flashed faux's kernel and used system tuner but it still wouldn't stick until I rebooted... I have minimum set to 192mhz and screen off at 192 as well but in CPU Spy I only see 1728, 540 and Deep Sleep
How many overclock apps do you have on you phone at one time? And yes after you've made CPU adjustments click set on boot and reboot
Sent from my SAMSUNG-SGH-I727 using xda premium
cdshepherd said:
How many overclock apps do you have on you phone at one time? And yes after you've made CPU adjustments click set on boot and reboot
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
1 at I time. I uninstall if it doesn't work before installing the next. i've had my phone with screen off for a while now and it seems that 75% it's staying at 540mhz, barely at deep sleep and rest at 1728mhz
I actually underclock my processor. To about 1ghz . As for your deep sleep issue I can't actually say cause I've never had the issue but look around the skyrocket threads. There's a lot of info on it.
Sent from my SAMSUNG-SGH-I727 using xda premium
i like nofrills
I use android overclock works fine on Da_G's kernel
Use faux clock for a faux version kernel. With any other kernel I have had great results with set CPU.
Sent from my SAMSUNG-SGH-I727 using XDA App