Database Info

[Q] Is it a hardware problem?

I am having this weird problem in my phone..
It shuts down suddenly and then goes into boot loop i.e. the SAMSUNG logo keeps on blinking until I remove the battery.When I put the battery back, the phone factory resets itself...Please help?

smartboy_anu said:
I am having this weird problem in my phone..
It shuts down suddenly and then goes into boot loop i.e. the SAMSUNG logo keeps on blinking until I remove the battery.When I put the battery back, the phone factory resets itself...Please help?
Click to expand...
Click to collapse
Did you do something with your phone or did this happen all by itself?
Try flashing STOCK ROM via Odin.

Put your phone in recovery, Try wiping user data but it'll delete you contacts. If nothing happens then reflash.

Hi All,
I am facing the same issue. I upgraded my firmware from stock 2.2 to 2.3.3 GB around 6 months back and it was working fine till 2 days back. Suddenly 2 days back it started restarting itself and it ended in a boot loop. When I tried removing battery and started the phone, it semi resets the phone(like contacts and other settings getting deleted). I tried going to recovery mode and did factory reset/ Wipe cache and restarted my phone, but it was of no use. Today I tried to flash my phone with XXKPQ firware for which I flashed XXKPE first as per the guidelines given in Misledz's post. Flashing was successful, but it again ended in boot loop.
Guys, Please guide me on how to proceed with this. Its really irritating to see my phone in boot loop
Thanks a ton in advance.

rajmohanase said:
Hi All,
I am facing the same issue. I upgraded my firmware from stock 2.2 to 2.3.3 GB around 6 months back and it was working fine till 2 days back. Suddenly 2 days back it started restarting itself and it ended in a boot loop. When I tried removing battery and started the phone, it semi resets the phone(like contacts and other settings getting deleted). I tried going to recovery mode and did factory reset/ Wipe cache and restarted my phone, but it was of no use. Today I tried to flash my phone with XXKPQ firware for which I flashed XXKPE first as per the guidelines given in Misledz's post. Flashing was successful, but it again ended in boot loop.
Guys, Please guide me on how to proceed with this. Its really irritating to see my phone in boot loop
Thanks a ton in advance.
Click to expand...
Click to collapse
I think this is a problem of psuedo reset...flash the stock firmware and take it to the service centre.They will replace the motherboard (you might even get 16GB internal memory )
Sent from my GT-I9003 using XDA

Damn!! I am having the exact same problem and it also started a few days back!! Plus the phone heats up a lot during this with a massive battery drain.
I have tried hard reset, but no good so far and the phone is completely in stock condition DDKP3. Any Solutions??

mznk said:
Damn!! I am having the exact same problem and it also started a few days back!! Plus the phone heats up a lot during this with a massive battery drain.
I have tried hard reset, but no good so far and the phone is completely in stock condition DDKP3. Any Solutions??
Click to expand...
Click to collapse
Read the above post :|
Sent from my GT-I9003 using XDA

It all happened by itself
rockyddroid said:
Did you do something with your phone or did this happen all by itself?
Try flashing STOCK ROM via Odin.
Click to expand...
Click to collapse
SikanderKeynes said:
Put your phone in recovery, Try wiping user data but it'll delete you contacts. If nothing happens then reflash.
Click to expand...
Click to collapse
It all started by itself...I am running the stock ROM only...I have tried clearing the cache and dalvik too..
Now i have flashed the recent ROM by Aditya (Titanium V3) and its having the same problem..!!

One more thing
One more thing that I have noticed is that whenever I press the home screen button after the phone is idle, the screen lights up and then the phone restarts suddenly resulting into boot loop..!!

[Q] Process system not responding

So after searching for solution for days I felt that now its the need to start a new post for new occurring problems in Samsung sl gt-i9003. Wile changing the chassis of my phone I accidentally broke the white wire which is known as board connector or Samsung flex wire. Once I got the shipment I fixed my phone, but a new issue came forward. I used Odin to flash rom with the latest rom and since then my phone keeps on rebooting and even if then it reaches setup screen where you select language then touch screen becomes unresponsive and I keep on seeing "process system not responding". So I flashed my phone over dozen times, even went back to foryo but nothin helped. Somewhere it suggested that try rootin your phone and then go to recovery mode and wipe cache, wipe dalvik cache and then fix permission, and reboot, and it worked. Touch screen started
Working so he doubt about sensor going bad is gone. So something about the dalvik cache and fix permission. But then my wifi gives error when I switch on, so I tried *#*#526#*#* to load driver but always came with unsuccessful
So I finally ran out of options and I am writing this post asking you all to help
This is my current config
PDA I9003XWLF2
PHONE I9003XXLE4
CSC I9003XXLF1
I am using Bagaria for rooting. Rest all rooting not working on mine. The software is poland's version of Samsung SL Gt i9003. With the new software updates the old rooting packages are giving glitches so I am open for new suggestions. Please suggest steps too. I tried remix ics, miui, ethenonx, etc to make wifi work. Only trouble, too much battery consumption in miui and rest has too much load on ram which is making wifi glitch.i am not a novice but at this moment I ran out of options and clues. I need my phone to start without rooting it. Even if I have to root every feature should work then.
Thank you

looks like none of you have any solution to the problem posted
i thought android gurus might have some trick saved up their sleeves

try flashing dhirus cm10 rom

unfortunately process com.android.phone has stopped

I tried to dial the # and I got this message unfortunately process com.android.phone has stopped
now every time I hit ok it comes back - after 3 times phone reboots and starts over the same message.
Phone is stock - just got updates OTA it is Global version
please advise if anyone had same issue and possible resolution. I checked some solutions from GAlaxy s2 and 3 but all of them require phone to actually work - I cant get to settings
thank you

Well i had the same problem after flashing many different roms. My mistake was forgetting to wipe to factory reset before flashing. Maybe this will solve your problem too.

Having this issue as well!
This started happening to me this morning. I am running CM12 Nightlies. I tried factory resetting...still happens. I tried everything. I even tried fastboot flashing the device to 100% stock...the first time I booted up after flashing stock and locking bootloader....the phone says "Unfortunately, the process com. android. phone has stopped". EVEN AFTER A FULL FLASH BACK TO STOCK UNROOTED 4.4.4!
HELP PLEASE!

[Completed] [Q] I need help with a Samsung Galaxy Tab 2 10.1 GT-P5113

Hello community, I am new here so I don' t know where to put this.
Well I need some help, I am having problems with my old tab, A Samsung Galaxy Tab 2 10.1 GT-P5113, Flashed with custom ROM CM 10.1.3 for GT-P5110
Worked fine for a year and a Half, the issue that I am having now is that, it constantly restarts, after entering to the OS I can tweak change etc, but after a few secs it just turns of and reboots the system.
The other problem that I am having is that I tried everything that I could think of. I deleted some apps, which came back after the reboot. I booted to safemode, and deleted the last apps that I installed, still came back after the crash reboot.
I went to recovery mode (CWM) and did a Factory reset, delete cache and delete Dalvik Cache. Nothing when reboot everything was like last time.
wen't to and tried to reflash CM 10.1.3 (stable) following every procedure and nothing everything was back.
Last thing I tried is ODIN with stock ROM (which is hard to find for this tab.) but get write error after going to half. I am downloading a second stock ROM (android 4.1.1) to see how it goes.
Hope to find help here, I would be greatly thankful.
EDIT: Flashed now with the new stock ROM, ODIN says success, everything seems fine, but again I got received by the same splash and the same logon screen, and still crashes and reboots...

I really need the help
Isifth said:
Hello community, I am new here so I don' t know where to put this.
Well I need some help, I am having problems with my old tab, A Samsung Galaxy Tab 2 10.1 GT-P5113, Flashed with custom ROM CM 10.1.3 for GT-P5110
Worked fine for a year and a Half, the issue that I am having now is that, it constantly restarts, after entering to the OS I can tweak change etc, but after a few secs it just turns of and reboots the system.
The other problem that I am having is that I tried everything that I could think of. I deleted some apps, which came back after the reboot. I booted to safemode, and deleted the last apps that I installed, still came back after the crash reboot.
I went to recovery mode (CWM) and did a Factory reset, delete cache and delete Dalvik Cache. Nothing when reboot everything was like last time.
wen't to and tried to reflash CM 10.1.3 (stable) following every procedure and nothing everything was back.
Last thing I tried is ODIN with stock ROM (which is hard to find for this tab.) but get write error after going to half. I am downloading a second stock ROM (android 4.1.1) to see how it goes.
Hope to find help here, I would be greatly thankful.
EDIT: Flashed now with the new stock ROM, ODIN says success, everything seems fine, but again I got received by the same splash and the same logon screen, and still crashes and reboots...
Click to expand...
Click to collapse
It keeps with the boot loop.

Hi, thank you for using XDA Assist. After you flash with Odin go into the stock recovery and do a factory reset. If that doesn't work it may be that you're device is just getting old and giving up the ghost. There's a whole forum for your device which may also help. See this,http://forum.xda-developers.com/galaxy-tab-2

Oh, that would be bad news :/
Do you think it could be that I deleted CWM rommanager app, and then accidentally deleted the .recovery, that put me into this situation?

Isifth said:
Oh, that would be bad news :/
Do you think it could be that I deleted CWM rommanager app, and then accidentally deleted the .recovery, that put me into this situation?
Click to expand...
Click to collapse
After you flash with Odin, boot into the stock recovery and do a factory reset
Sent from my Nexus 9 using XDA Free mobile app

jd1639 said:
After you flash with Odin, boot into the stock recovery and do a factory reset
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
It didn't work. I noticed that after the transferring of odin it doesn't go to the installation procedure. It just skips that and goes to the logscreen with how everything I had.
Now I went to safe mode, and deleted all apps that I could from play store. when I came back after a restart, everything was there, back. :/

Please ask any further questions you have on the q&a forum in your drives forum, the link I gave you. They are the experts on your device
Thread closed.

[Q]Unknown Volume for path [ext-sd] (Need attention!)

First of all, I am sorry for making new thread. But it seems that I've tried searching everywhere for the solution but I couldn't find any.
Here is my problem,
Last few month, I flashed my P3100 to OmniRom. It works perfectly!
But for a past few weeks, I got gapps suddenly stopped working. As I know what to do, I reset my P3100 by wiping all data using Philz recovery.
And then it worked fine again.
Unfortunately, for last three days. It happened again.
So I repeated the same whole thing as I did again.
The problem is, when I tried to reset all data, it won't work. I mean, it looked like I didn't reset anything. Thus, my tablet keeps on showing this message such as gapps has stopped.
I tried to download new ROM. And flashed it via Philz recovery. But it's not working. It remain the same as if nothing happened. I'm still haven't sleep for 3 days looking for a solution. Would somebody here help me? As I really really need to know what is happening with it.
Solutions I've tried but failed:
1- Wipe all data but failed as it looked like nothing happened.
2- Wipe everything everywhere but still remain still
3- Flashing stock rom via Odin but failed.
4- Flashing another version of recovery via Odin but failed
P/S: I've noticed that E:Unknown volume for path [EXT-SD] when I'm doing full wipe.

No one can help me?