Hello community, I am new here so I don' t know where to put this.
Well I need some help, I am having problems with my old tab, A Samsung Galaxy Tab 2 10.1 GT-P5113, Flashed with custom ROM CM 10.1.3 for GT-P5110
Worked fine for a year and a Half, the issue that I am having now is that, it constantly restarts, after entering to the OS I can tweak change etc, but after a few secs it just turns of and reboots the system.
The other problem that I am having is that I tried everything that I could think of. I deleted some apps, which came back after the reboot. I booted to safemode, and deleted the last apps that I installed, still came back after the crash reboot.
I went to recovery mode (CWM) and did a Factory reset, delete cache and delete Dalvik Cache. Nothing when reboot everything was like last time.
wen't to and tried to reflash CM 10.1.3 (stable) following every procedure and nothing everything was back.
Last thing I tried is ODIN with stock ROM (which is hard to find for this tab.) but get write error after going to half. I am downloading a second stock ROM (android 4.1.1) to see how it goes.
Hope to find help here, I would be greatly thankful.
EDIT: Flashed now with the new stock ROM, ODIN says success, everything seems fine, but again I got received by the same splash and the same logon screen, and still crashes and reboots...
I really need the help
Isifth said:
Hello community, I am new here so I don' t know where to put this.
Well I need some help, I am having problems with my old tab, A Samsung Galaxy Tab 2 10.1 GT-P5113, Flashed with custom ROM CM 10.1.3 for GT-P5110
Worked fine for a year and a Half, the issue that I am having now is that, it constantly restarts, after entering to the OS I can tweak change etc, but after a few secs it just turns of and reboots the system.
The other problem that I am having is that I tried everything that I could think of. I deleted some apps, which came back after the reboot. I booted to safemode, and deleted the last apps that I installed, still came back after the crash reboot.
I went to recovery mode (CWM) and did a Factory reset, delete cache and delete Dalvik Cache. Nothing when reboot everything was like last time.
wen't to and tried to reflash CM 10.1.3 (stable) following every procedure and nothing everything was back.
Last thing I tried is ODIN with stock ROM (which is hard to find for this tab.) but get write error after going to half. I am downloading a second stock ROM (android 4.1.1) to see how it goes.
Hope to find help here, I would be greatly thankful.
EDIT: Flashed now with the new stock ROM, ODIN says success, everything seems fine, but again I got received by the same splash and the same logon screen, and still crashes and reboots...
Click to expand...
Click to collapse
It keeps with the boot loop.
Hi, thank you for using XDA Assist. After you flash with Odin go into the stock recovery and do a factory reset. If that doesn't work it may be that you're device is just getting old and giving up the ghost. There's a whole forum for your device which may also help. See this,http://forum.xda-developers.com/galaxy-tab-2
Oh, that would be bad news :/
Do you think it could be that I deleted CWM rommanager app, and then accidentally deleted the .recovery, that put me into this situation?
Isifth said:
Oh, that would be bad news :/
Do you think it could be that I deleted CWM rommanager app, and then accidentally deleted the .recovery, that put me into this situation?
Click to expand...
Click to collapse
After you flash with Odin, boot into the stock recovery and do a factory reset
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
After you flash with Odin, boot into the stock recovery and do a factory reset
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
It didn't work. I noticed that after the transferring of odin it doesn't go to the installation procedure. It just skips that and goes to the logscreen with how everything I had.
Now I went to safe mode, and deleted all apps that I could from play store. when I came back after a restart, everything was there, back. :/
Please ask any further questions you have on the q&a forum in your drives forum, the link I gave you. They are the experts on your device
Thread closed.
Related
Hello, i am android newbie, but i use my 5801 for a few months. But with help of this forum i make from my stock phone pretty good machine for me. Everything was perfect, i instal cwm,root, kernel g3 2.4 oc,setcpu, bassbeats,... A still no problems. But two days back i tried to instal BLN via SGS kernel flasher within android. During flashing kernel it was o.k. but at the end phone freeze a take did not reboot. Just screen stay for 10 min same. So i decided to hold power button and turn off phone. After that all the user apps were gone. So i decided to recovery via cwm from backup. after that phone started , still no user apps, only system apps and no possibility to install anything cause task manager in phone showed 0kb data , like rom was not mounted or i dont know... I started panic and wipe everything boot, cache, sd,data ... just all. And reflash kernel 2.4 back to stock
After done that it was totally in ....hole. Phone could boot to recovery but, could not start android. Just logo "samsung" is still on the screen. I tried to instal firmware( samsung 5800 xwjpi with files sbl.bin and boot.bin through odin but still same...Only boot animation is changed now...And still is just shining "samsung" logo. Is there any chance to repare that? I think i should install bootloader but i am not sure how. Or is it automatically doing by flashing rom? Pls help if u can. Many thanks.
lumen2012 said:
Hello, i am android newbie, but i use my 5801 for a few months. But with help of this forum i make from my stock phone pretty good machine for me. Everything was perfect, i instal cwm,root, kernel g3 2.4 oc,setcpu, bassbeats,... A still no problems. But two days back i tried to instal BLN via SGS kernel flasher within android. During flashing kernel it was o.k. but at the end phone freeze a take did not reboot. Just screen stay for 10 min same. So i decided to hold power button and turn off phone. After that all the user apps were gone. So i decided to recovery via cwm from backup. after that phone started , still no user apps, only system apps and no possibility to install anything cause task manager in phone showed 0kb data , like rom was not mounted or i dont know... I started panic and wipe everything boot, cache, sd,data ... just all. And reflash kernel 2.4 back to stock
After done that it was totally in ....hole. Phone could boot to recovery but, could not start android. Just logo "samsung" is still on the screen. I tried to instal firmware( samsung 5800 xwjpi with files sbl.bin and boot.bin through odin but still same...Only boot animation is changed now...And still is just shining "samsung" logo. Is there any chance to repare that? I think i should install bootloader but i am not sure how. Or is it automatically doing by flashing rom? Pls help if u can. Many thanks.
Click to expand...
Click to collapse
Try to wipe data and cache
DoR2 said:
Try to wipe data and cache
Click to expand...
Click to collapse
Already tried. No improvement. Bootlooping(?) screen again and again for 15 min.
lumen2012 said:
Already tried. No improvement. Bootlooping(?) screen again and again for 15 min.
Click to expand...
Click to collapse
Try flashing cm 7
hey..... dont forget to thank me!!!!!!!!
So, it looks problem is solved. I tried to flash froyo kyrillos rom 9.7 and phone finally works. Now I only need to solve problems with freezing, after flashing it happens two times during one hour Updating to 9.7.1. actually not possible cause download servers down...Maybe tommorrow. And why did you say i should install just CM 7 ?
lumen2012 said:
So, it looks problem is solved. I tried to flash froyo kyrillos rom 9.7 and phone finally works. Now I only need to solve problems with freezing, after flashing it happens two times during one hour Updating to 9.7.1. actually not possible cause download servers down...Maybe tommorrow. And why did you say i should install just CM 7 ?
Click to expand...
Click to collapse
I think it's kernel related problem. Try to flash CM7 or Kyrillos 10 or use PuruKisadHybrid
It is possible that was only temporary problem as looks , freezing has never repeat again . But after your advices i tried flash cm7 i now use cm7 kyrillos 10.6. Just testing , only well known gaming issues yet. But now i know flashing is so easy :victory:
Hi folks,
I searched the other forums but didn't see anything that looked like my incident so I'm hoping you can help.
I recently replaced my MicroSD card and took the opportunity to install CleanROM 6. This is my 4th time adding a custom rom so I was confident. I'm rooted already so I proceed to back up using Titanium Backup, booted to CWM, chose "wipe data / factory reset", and then walked through the process of installing CleanROM successfully from the zip file. Everything went smoothly like it has every previous time. When CleanROM installation completed, I returned to CWM and rebooted.
The problem is that when I turn the phone on, it boots to the "SAMSUNG GALAXY S III" SCREEN" and hangs there. I am able to get into both CWM Recovery and ODIN. Do I have a way to salvage my phone?
redownload the ROM and try again.
ddurandSGS3 said:
redownload the ROM and try again.
Click to expand...
Click to collapse
Good advice. I tried it again with the same results. However, I just tried cyanogenmod 10 with success. Thanks
Gave me an excuse to try cyanogenmod... I've been eyeing this for sometime. Thanks again.
Hi all
I’m a complete noob at this and it seems like I have got myself into a bit of a pickle. Sorry for the massive description but I thought it would make it easier to get a good answer.
My Phone:
Samsung Galaxy S4 GT 19505 LTE
PDA I9505XXUEMK8
CSC I9505BTUEMK5
MODEM I9505XXUEMK8
I successfully rooted my phone using Odin. In Odin I added the "CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5" file to the PDA field then rebooted the device. Then I added the "openrecovery-twrp-2.6.3.1-jfltexx" file to the PDA field, rebooted the device and the phone automatically opened in TWRP recovery. In recovery mode I wiped the cache, system and dalvik cache. I then went to install, browsed to the "I9505 Official_Google_Edition_4.3_by_Jamal2367_Finaly_v2.0" file on my SD card, rebooted the device and the Google logo came up on the screen for a few minutes and all was good. Got my new ROM, ran a root checker and all was good.
After some research I decided I wanted to use the Pacman ROM as it seemed to a lot more customisable. Using the same method I went to TWRP recovery wiped the cache, system, and dalvik cache. I then went to Install, browsed for the pacman ROM and the Gapps file on my SD card and everything installed ok, the phone restarted and the pacman logo came up everything was fine. Although I did notice on start up that I got this message.(and have had this error message ever since)
kernel is not seandriod enforcing
set warranty bit : kernel
After using the Pacman ROM for a day I noticed a lot of bugs like my apps would disappear, I couldn't use my banking apps and my phone was generally performing very badly. So I decided to remove the ROM and use CyanogenMod ROM under the recommendation of a friend. So again I pressed home+power+vol up to enter recovery mode but this time it didn’t enter the TWRP recovery it entered the stock recovery mode. This was slightly concerning but I proceeded to use the list menu and cleared the cache etc, browsed the SD card and went to the CyanogenMod 10.2 ROM I previously downloaded. It began to install but in red I got the error message stating that I didn’t have the right permission or signature. The phone rebooted back to the Pacman ROM. I tried the above three times and it still continued to boot back into Pacman ROM sometimes I struggled to even get back into recovery mode.
Soooooo I decided to try and go back to the Google Edition 4.3 ROM and play it safe, using the method from my first paragraph. But when it installed through TWRP I got an error message saying cant find MD5 file. The device rebooted and the Google edition logo came up on the screen but it seems to be locked in a loop. The Google logo wont go away and the phone vibrates once then three times quickly every 10 seconds.
I can still enter both TWRP recover and Download Mode. But I don’t want to mess around with it anymore without getting some advice. Any help would be much appreciated as I really need my phone working.
Thanks again
Aiden
Did you create a backup while on your first run with google edition? If so wipe cache, system, and dalvik and restore to your backup. Should put you back to where you began.
Sent from my LGMS769 using XDA Premium 4 mobile app
I know I should, but I didnt. Is it still fixable ?
*Update*
Couldnt help myself had to have a tinker around. Managed to get Cyanogenmod 10 working with Gapps. Gonna see how I get on with this. Although still would like to know I have been having all these problems.
Sometimes things just dont go as planned: p I have easily soft bricked my phone around 10 times and always able to fix it. You really should have made a stock backup before flashing anything. I recommend doing it now so you at least have a known working configuation backed up for future use. Trust me backups are your friends!
Sent from my LGMS769 using XDA Premium 4 mobile app
Thanks for your replies.
Ye gonna that right now Cyan Mod so far is running very smooth without any problems.
Regards
Aiden
[Q] Stuck on TWRP/System Recovery. Need help.
Hello, first time posting here.
So like the title says, my phone is stuck on System Recovery. I have a Samsung Galaxy A5 (A500F model), rooted, and with TWRP installed.
The phone was running fine for 3 months without problems, so I guess it must be from recent installs, but I haven't installed anything since last week. The last action I did prior to this problem was going to System Recovery via Link2SD app, since the usual button combination didn't work. So I guess the fault lies there? At this point I have tried everything I can do, like restarting, rebooting, wiping, factory resetting, and I even restored a backup but it still goes to System Recovery after every restart.
This is my first problem on Android phones, so I hope you can help me.
If you need more information, I'd gladly provide.
Cheers.
....bump.
I've been using Cyanogenmod 12.1 Nightlies for a bit over a month, only problem I've had so far is that it would randomly turn off (which I noticed other users have been experiencing). 2 or 3 days after the Snapchat update, I go to use the app, but it turned my phone off. I thought "Okay, this has happened before" so I try getting on Snapchat again. Same thing happens. So I just decide not to use Snapchat. Yesterday morning, my phone just shut off from a calculator app and I had around 73% battery, so I try turning it back on but it won't boot past the second Cyanogenmod logo. The only way to get it to boot is to plug it into my computer and use it, as it turns off as soon as I unplug it and gets me stuck in a bootloop. I backed everything up because I noticed this is a major issue right now, and my phone may be bricked. Now, there's a 1/5 chance that it will boot all the way to my homescreen while plugged in, but using any camera app kills it. It will boot into recovery and download mode. What do I do?
Edit: Forgot to mention I was using a Samsung Galaxy S III d2att
Just tried factory resetting/wiping cache/wiping dalvik cache. Still not going past cyanogenmod logo. Still unsure as to what the problem is. Desperately need help. Thanks.
improblem said:
Just tried factory resetting/wiping cache/wiping dalvik cache. Still not going past cyanogenmod logo. Still unsure as to what the problem is. Desperately need help. Thanks.
Click to expand...
Click to collapse
Hi,
Try posting your question here;
http://forum.xda-developers.com/galaxy-s3-att/help
The experts there may be able to help.
Good luck!