[Q] Unbrick - Galaxy 3 Q&A, Help & Troubleshooting

Hello, i am android newbie, but i use my 5801 for a few months. But with help of this forum i make from my stock phone pretty good machine for me. Everything was perfect, i instal cwm,root, kernel g3 2.4 oc,setcpu, bassbeats,... A still no problems. But two days back i tried to instal BLN via SGS kernel flasher within android. During flashing kernel it was o.k. but at the end phone freeze a take did not reboot. Just screen stay for 10 min same. So i decided to hold power button and turn off phone. After that all the user apps were gone. So i decided to recovery via cwm from backup. after that phone started , still no user apps, only system apps and no possibility to install anything cause task manager in phone showed 0kb data , like rom was not mounted or i dont know... I started panic and wipe everything boot, cache, sd,data ... just all. And reflash kernel 2.4 back to stock
After done that it was totally in ....hole. Phone could boot to recovery but, could not start android. Just logo "samsung" is still on the screen. I tried to instal firmware( samsung 5800 xwjpi with files sbl.bin and boot.bin through odin but still same...Only boot animation is changed now...And still is just shining "samsung" logo. Is there any chance to repare that? I think i should install bootloader but i am not sure how. Or is it automatically doing by flashing rom? Pls help if u can. Many thanks.

lumen2012 said:
Hello, i am android newbie, but i use my 5801 for a few months. But with help of this forum i make from my stock phone pretty good machine for me. Everything was perfect, i instal cwm,root, kernel g3 2.4 oc,setcpu, bassbeats,... A still no problems. But two days back i tried to instal BLN via SGS kernel flasher within android. During flashing kernel it was o.k. but at the end phone freeze a take did not reboot. Just screen stay for 10 min same. So i decided to hold power button and turn off phone. After that all the user apps were gone. So i decided to recovery via cwm from backup. after that phone started , still no user apps, only system apps and no possibility to install anything cause task manager in phone showed 0kb data , like rom was not mounted or i dont know... I started panic and wipe everything boot, cache, sd,data ... just all. And reflash kernel 2.4 back to stock
After done that it was totally in ....hole. Phone could boot to recovery but, could not start android. Just logo "samsung" is still on the screen. I tried to instal firmware( samsung 5800 xwjpi with files sbl.bin and boot.bin through odin but still same...Only boot animation is changed now...And still is just shining "samsung" logo. Is there any chance to repare that? I think i should install bootloader but i am not sure how. Or is it automatically doing by flashing rom? Pls help if u can. Many thanks.
Click to expand...
Click to collapse
Try to wipe data and cache

DoR2 said:
Try to wipe data and cache
Click to expand...
Click to collapse
Already tried. No improvement. Bootlooping(?) screen again and again for 15 min.

lumen2012 said:
Already tried. No improvement. Bootlooping(?) screen again and again for 15 min.
Click to expand...
Click to collapse
Try flashing cm 7
hey..... dont forget to thank me!!!!!!!!

So, it looks problem is solved. I tried to flash froyo kyrillos rom 9.7 and phone finally works. Now I only need to solve problems with freezing, after flashing it happens two times during one hour Updating to 9.7.1. actually not possible cause download servers down...Maybe tommorrow. And why did you say i should install just CM 7 ?

lumen2012 said:
So, it looks problem is solved. I tried to flash froyo kyrillos rom 9.7 and phone finally works. Now I only need to solve problems with freezing, after flashing it happens two times during one hour Updating to 9.7.1. actually not possible cause download servers down...Maybe tommorrow. And why did you say i should install just CM 7 ?
Click to expand...
Click to collapse
I think it's kernel related problem. Try to flash CM7 or Kyrillos 10 or use PuruKisadHybrid

It is possible that was only temporary problem as looks , freezing has never repeat again . But after your advices i tried flash cm7 i now use cm7 kyrillos 10.6. Just testing , only well known gaming issues yet. But now i know flashing is so easy :victory:

Related

[Q] Is it a hardware problem?

I am having this weird problem in my phone..
It shuts down suddenly and then goes into boot loop i.e. the SAMSUNG logo keeps on blinking until I remove the battery.When I put the battery back, the phone factory resets itself...Please help?
smartboy_anu said:
I am having this weird problem in my phone..
It shuts down suddenly and then goes into boot loop i.e. the SAMSUNG logo keeps on blinking until I remove the battery.When I put the battery back, the phone factory resets itself...Please help?
Click to expand...
Click to collapse
Did you do something with your phone or did this happen all by itself?
Try flashing STOCK ROM via Odin.
Put your phone in recovery, Try wiping user data but it'll delete you contacts. If nothing happens then reflash.
Hi All,
I am facing the same issue. I upgraded my firmware from stock 2.2 to 2.3.3 GB around 6 months back and it was working fine till 2 days back. Suddenly 2 days back it started restarting itself and it ended in a boot loop. When I tried removing battery and started the phone, it semi resets the phone(like contacts and other settings getting deleted). I tried going to recovery mode and did factory reset/ Wipe cache and restarted my phone, but it was of no use. Today I tried to flash my phone with XXKPQ firware for which I flashed XXKPE first as per the guidelines given in Misledz's post. Flashing was successful, but it again ended in boot loop.
Guys, Please guide me on how to proceed with this. Its really irritating to see my phone in boot loop
Thanks a ton in advance.
rajmohanase said:
Hi All,
I am facing the same issue. I upgraded my firmware from stock 2.2 to 2.3.3 GB around 6 months back and it was working fine till 2 days back. Suddenly 2 days back it started restarting itself and it ended in a boot loop. When I tried removing battery and started the phone, it semi resets the phone(like contacts and other settings getting deleted). I tried going to recovery mode and did factory reset/ Wipe cache and restarted my phone, but it was of no use. Today I tried to flash my phone with XXKPQ firware for which I flashed XXKPE first as per the guidelines given in Misledz's post. Flashing was successful, but it again ended in boot loop.
Guys, Please guide me on how to proceed with this. Its really irritating to see my phone in boot loop
Thanks a ton in advance.
Click to expand...
Click to collapse
I think this is a problem of psuedo reset...flash the stock firmware and take it to the service centre.They will replace the motherboard (you might even get 16GB internal memory )
Sent from my GT-I9003 using XDA
Damn!! I am having the exact same problem and it also started a few days back!! Plus the phone heats up a lot during this with a massive battery drain.
I have tried hard reset, but no good so far and the phone is completely in stock condition DDKP3. Any Solutions??
mznk said:
Damn!! I am having the exact same problem and it also started a few days back!! Plus the phone heats up a lot during this with a massive battery drain.
I have tried hard reset, but no good so far and the phone is completely in stock condition DDKP3. Any Solutions??
Click to expand...
Click to collapse
Read the above post :|
Sent from my GT-I9003 using XDA
It all happened by itself
rockyddroid said:
Did you do something with your phone or did this happen all by itself?
Try flashing STOCK ROM via Odin.
Click to expand...
Click to collapse
SikanderKeynes said:
Put your phone in recovery, Try wiping user data but it'll delete you contacts. If nothing happens then reflash.
Click to expand...
Click to collapse
It all started by itself...I am running the stock ROM only...I have tried clearing the cache and dalvik too..
Now i have flashed the recent ROM by Aditya (Titanium V3) and its having the same problem..!!
One more thing
One more thing that I have noticed is that whenever I press the home screen button after the phone is idle, the screen lights up and then the phone restarts suddenly resulting into boot loop..!!

[Q] PLEASE HELP, Stuck in bootloop and no way out!

I have a p5113 and it is running 4.2.2 it is a friends. It turns on all the way to the homescreen for about 30 seconds. Then it reboots. I have gotten into recovery and it lets me wipe data factory reset. Then when I go to reboot it shows an error below the android and there has been no data wipe when it reboots. and reboots and reboots.........It also says NO COMMAND when booting recovery below the android. OH, I also tried flashing another stock recovery. Did not fix issue with recovery.
I have gotten into download mode and tried to cf root. Doesnt work, no recovery. Still same as above just goes to stock with no command written at bottom then error when you go to reboot it. Tried both versions of CWM and TWRP Odin files. DONT WORK. Tried to flash recovery by zip and get signature verification failure.
I figured oh, I will do what I always do to tablets try and reinstall the firmware. Which is the 4.2.2 firmware I go ahead and odin it, everything looks fine, it did take way too long like an hour and half. Passes, reboots, same operating system same data didnt change a thing! Still rebooting still recovery errors. Tried to downgrade to ICS and it passed after an hour and a half of slow odining NOTHING again same story as JB didnt change anything.
I have noticed that there is an avg in apps. I never get enough time to uninstall it. It always reboots before I can get to it. ANY HELP IS APPRECIATED.
jhr5474 said:
I have a p5113 and it is running 4.2.2 it is a friends. It turns on all the way to the homescreen for about 30 seconds. Then it reboots. I have gotten into recovery and it lets me wipe data factory reset. Then when I go to reboot it shows an error below the android and there has been no data wipe when it reboots. and reboots and reboots.........It also says NO COMMAND when booting recovery below the android. OH, I also tried flashing another stock recovery. Did not fix issue with recovery.
I have gotten into download mode and tried to cf root. Doesnt work, no recovery. Still same as above just goes to stock with no command written at bottom then error when you go to reboot it. Tried both versions of CWM and TWRP Odin files. DONT WORK. Tried to flash recovery by zip and get signature verification failure.
I figured oh, I will do what I always do to tablets try and reinstall the firmware. Which is the 4.2.2 firmware I go ahead and odin it, everything looks fine, it did take way too long like an hour and half. Passes, reboots, same operating system same data didnt change a thing! Still rebooting still recovery errors. Tried to downgrade to ICS and it passed after an hour and a half of slow odining NOTHING again same story as JB didnt change anything.
I have noticed that there is an avg in apps. I never get enough time to uninstall it. It always reboots before I can get to it. ANY HELP IS APPRECIATED.
Click to expand...
Click to collapse
so you wanna say that your tab is in bootloop
if that then please revert to stock rom
also if you are not able to do this then i have to say that your tab is bricked
try triangle away or take it to customer care
yep its
aditya rathee said:
so you wanna say that your tab is in bootloop
if that then please revert to stock rom
also if you are not able to do this then i have to say that your tab is bricked
try triangle away or take it to customer care
Click to expand...
Click to collapse
not a brick and I am on stock if you would have read the OP you would know that. I have had a brick before the definition of a brick is a device that does not turn on. I have flashed many tabs with stock and customs. Thanks for the great advice but I am a member of XDA and I like to do things myself or with the help of others in my community. I REFUSE TO TAKE ANY ANDROID DEVICE TO CUSTOMER CARE THAT STILL TURNS ON>
jhr5474 said:
not a brick and I am on stock if you would have read the OP you would know that. I have had a brick before the definition of a brick is a device that does not turn on. I have flashed many tabs with stock and customs. Thanks for the great advice but I am a member of XDA and I like to do things myself or with the help of others in my community. I REFUSE TO TAKE ANY ANDROID DEVICE TO CUSTOMER CARE THAT STILL TURNS ON>
Click to expand...
Click to collapse
i like your confidence brother but i was just helping you
also with your threads title in thought you were still having bootloop
also boot loop mainly happens when system files interfere with each other and result in instability during boot and crashes also it is not always necessary that in boot loop device would not turn on as you said earlier
i have seen boot loop on my tab even during charging animation as it was off it was due to use of flashing scripts that conflicted with each other

[Q] Bricked... and bad battery :(

Just to explan in short notes how everything started..
I was using "ICS GPCR V2.1 by P-VLAD" happily for about a year i think, didn't have any problems. Then one day when i started to play some game my phone just turned off. After that i noticed that my battery drops to zero when i turn my phone on again. I noticed after, that my phone shuts down always when i watch 3d stuff or when my flashlight is on, after 1 or 2 minutes..
So i thinked it's time to refresh system.. So i went to factory reset on phone settings (not on recovery). Then i fell in bootloop. I don't know why but then i started TWRP and wiped cache, dalvik, system.. And that's it, im now in bootloop.
After that i accidently saw that i have inflated battery, so system probably was not the problem..
I readed everything from around this and...
Flashed again TWRP, bootloaders with "SimpleTool" and "OS Hacking" (tried them both), then i tried again to flash P-VLAD ROM but nothing, just says "booti: mmc_read 0x55e2dc" and bootloop stays. Tried "Universal_RecoveryLoop_Breaker.zip", then flashd everything, but it's same again.
I don't know it's possible because of bad battery that those tools cannot do their job. Also when i flash ROM i must get phone to charger..
What to try next?
ratluci said:
Just to explan in short notes how everything started..
I was using "ICS GPCR V2.1 by P-VLAD" happily for about a year i think, didn't have any problems. Then one day when i started to play some game my phone just turned off. After that i noticed that my battery drops to zero when i turn my phone on again. I noticed after, that my phone shuts down always when i watch 3d stuff or when my flashlight is on, after 1 or 2 minutes..
So i thinked it's time to refresh system.. So i went to factory reset on phone settings (not on recovery). Then i fell in bootloop. I don't know why but then i started TWRP and wiped cache, dalvik, system.. And that's it, im now in bootloop.
After that i accidently saw that i have inflated battery, so system probably was not the problem..
I readed everything from around this and...
Flashed again TWRP, bootloaders with "SimpleTool" and "OS Hacking" (tried them both), then i tried again to flash P-VLAD ROM but nothing, just says "booti: mmc_read 0x55e2dc" and bootloop stays. Tried "Universal_RecoveryLoop_Breaker.zip", then flashd everything, but it's same again.
I don't know it's possible because of bad battery that those tools cannot do their job. Also when i flash ROM i must get phone to charger..
What to try next?
Click to expand...
Click to collapse
try flashing system with kdz it will return you phone to stock system and it should me good then
DiveNNN said:
try flashing system with kdz it will return you phone to stock system and it should me good then
Click to expand...
Click to collapse
Thanks that was my next step. Problem solved.
But next problem... I started Stock ROM everzthing worked fine.. Then i tried to install "OptimusRS ICS_ROM_P920" http://forum.xda-developers.com/showthread.php?t=2317616,
and after flasing, phone doesnt see my SIM CARD (says , "your SIM Card doesnt allow connection to this network")
How to solve this now..
Just to add that my SIM CARD has PIN.. Maybe thats some bug
Just one thing, i can see IMEI..
ratluci said:
Thanks that was my next step. Problem solved.
But next problem... I started Stock ROM everzthing worked fine.. Then i tried to install "OptimusRS ICS_ROM_P920" http://forum.xda-developers.com/showthread.php?t=2317616,
and after flasing, phone doesnt see my SIM CARD (says , "your SIM Card doesnt allow connection to this network")
How to solve this now..
Just to add that my SIM CARD has PIN.. Maybe thats some bug
Just one thing, i can see IMEI..
Click to expand...
Click to collapse
Ask develolper of ROM
DiveNNN said:
Ask develolper of ROM
Click to expand...
Click to collapse
I installed ICS GPCR V2.1 by P-VLAD again and everythig is perfect.. Don't know why OptimusR wont work with my SIM..
Just need to buy new battery.

[Completed] [Q] I need help with a Samsung Galaxy Tab 2 10.1 GT-P5113

Hello community, I am new here so I don' t know where to put this.
Well I need some help, I am having problems with my old tab, A Samsung Galaxy Tab 2 10.1 GT-P5113, Flashed with custom ROM CM 10.1.3 for GT-P5110
Worked fine for a year and a Half, the issue that I am having now is that, it constantly restarts, after entering to the OS I can tweak change etc, but after a few secs it just turns of and reboots the system.
The other problem that I am having is that I tried everything that I could think of. I deleted some apps, which came back after the reboot. I booted to safemode, and deleted the last apps that I installed, still came back after the crash reboot.
I went to recovery mode (CWM) and did a Factory reset, delete cache and delete Dalvik Cache. Nothing when reboot everything was like last time.
wen't to and tried to reflash CM 10.1.3 (stable) following every procedure and nothing everything was back.
Last thing I tried is ODIN with stock ROM (which is hard to find for this tab.) but get write error after going to half. I am downloading a second stock ROM (android 4.1.1) to see how it goes.
Hope to find help here, I would be greatly thankful.
EDIT: Flashed now with the new stock ROM, ODIN says success, everything seems fine, but again I got received by the same splash and the same logon screen, and still crashes and reboots...
I really need the help
Isifth said:
Hello community, I am new here so I don' t know where to put this.
Well I need some help, I am having problems with my old tab, A Samsung Galaxy Tab 2 10.1 GT-P5113, Flashed with custom ROM CM 10.1.3 for GT-P5110
Worked fine for a year and a Half, the issue that I am having now is that, it constantly restarts, after entering to the OS I can tweak change etc, but after a few secs it just turns of and reboots the system.
The other problem that I am having is that I tried everything that I could think of. I deleted some apps, which came back after the reboot. I booted to safemode, and deleted the last apps that I installed, still came back after the crash reboot.
I went to recovery mode (CWM) and did a Factory reset, delete cache and delete Dalvik Cache. Nothing when reboot everything was like last time.
wen't to and tried to reflash CM 10.1.3 (stable) following every procedure and nothing everything was back.
Last thing I tried is ODIN with stock ROM (which is hard to find for this tab.) but get write error after going to half. I am downloading a second stock ROM (android 4.1.1) to see how it goes.
Hope to find help here, I would be greatly thankful.
EDIT: Flashed now with the new stock ROM, ODIN says success, everything seems fine, but again I got received by the same splash and the same logon screen, and still crashes and reboots...
Click to expand...
Click to collapse
It keeps with the boot loop.
Hi, thank you for using XDA Assist. After you flash with Odin go into the stock recovery and do a factory reset. If that doesn't work it may be that you're device is just getting old and giving up the ghost. There's a whole forum for your device which may also help. See this,http://forum.xda-developers.com/galaxy-tab-2
Oh, that would be bad news :/
Do you think it could be that I deleted CWM rommanager app, and then accidentally deleted the .recovery, that put me into this situation?
Isifth said:
Oh, that would be bad news :/
Do you think it could be that I deleted CWM rommanager app, and then accidentally deleted the .recovery, that put me into this situation?
Click to expand...
Click to collapse
After you flash with Odin, boot into the stock recovery and do a factory reset
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
After you flash with Odin, boot into the stock recovery and do a factory reset
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
It didn't work. I noticed that after the transferring of odin it doesn't go to the installation procedure. It just skips that and goes to the logscreen with how everything I had.
Now I went to safe mode, and deleted all apps that I could from play store. when I came back after a restart, everything was there, back. :/
Please ask any further questions you have on the q&a forum in your drives forum, the link I gave you. They are the experts on your device
Thread closed.

[CM] SM-N900 Stuck at optimizing apps, bootloops

Hi there!
After about a week ago, I’ve turned off my Note 3. Then two days later, when I wanted to use it, I’ve turned it on. After CM logo appears, its says:
“Android is starting
Optimizing x apps of x”
I know this is because of ART, but after it finishes, my phone reboots, and CM logo appears again, and nothing happens. After a while, it starts optimizing apps again. Now I left it for 2 hours, my phone didnt boot up.
What should I do? I didnt flash any new kernel, rom, recovery or anything else. Im on CyanogenMod, with CWM recovery. I dont want to factory reset, because of my photos and videos.
Even I tried to start in safe mode, but I couldnt get to it, and Im not really sure that I tried to enter safe mode properly.
Please help!
Just dirty flash the rom again through cwm.
See if it works
It's high time you flashed TWRP already.
Bence98007 said:
Hi there!
After about a week ago, I’ve turned off my Note 3. Then two days later, when I wanted to use it, I’ve turned it on. After CM logo appears, its says:
“Android is starting
Optimizing x apps of x”
I know this is because of ART, but after it finishes, my phone reboots, and CM logo appears again, and nothing happens. After a while, it starts optimizing apps again. Now I left it for 2 hours, my phone didnt boot up.
What should I do? I didnt flash any new kernel, rom, recovery or anything else. Im on CyanogenMod, with CWM recovery. I dont want to factory reset, because of my photos and videos.
Even I tried to start in safe mode, but I couldnt get to it, and Im not really sure that I tried to enter safe mode properly.
Please help!
Click to expand...
Click to collapse
Ahh I would suggest you to get TWRP, The world has moved on and I think you should too! It's just a little better at things overall. TWRP can be flashed through ODIN. As for the Bootloop, try dirty flashing the ROM. Just wipe the dalvik/ART and cache and leave the rest as it is.
Dinara° said:
Ahh I would suggest you to get TWRP, The world has moved on and I think you should too! It's just a little better at things overall. TWRP can be flashed through ODIN. As for the Bootloop, try dirty flashing the ROM. Just wipe the dalvik/ART and cache and leave the rest as it is.
Click to expand...
Click to collapse
What do you mean on “dirty flashing”? Do I lose my data if I flash my rom again?
Bence98007 said:
What do you mean on “dirty flashing”? Do I lose my data if I flash my rom again?
Click to expand...
Click to collapse
No you don't, dirty flashing = installing the same ROM without wiping or resetting any data sets, just reflashing that zip again, JIC some files got corrupted, if that doesn't help you might have to give it a fresh start.

Categories

Resources