Related
Ok, so i have had a samsung captivate since last summer. I just did the official froyo update the other day and it was successful with kies mini. I then decided to root it using super1click which also worked successfully. I have superuser, titanium backup with busybox installed, and super manager and terminal emulator. I also successfully got clockworkmod flashed and working.
My problem is that ive got the new cognition rom on my internal sd card, but when i try to flash it with cwm, i get the 3e recovery failure message. Ive been reading various sites today on how to fix this problem, but every site seems to tell me something different. I ask this question here, because it seems to be the most knowledgeable site to go to.
How do i get my rooted captivate, with all the above installed and running, to allow me to flash a new rom and possible a new kernal down the road? Im about to go insane trying to decipher through all the info all the different sites have said. Sorry to write such a novel on a tired subject, but im going crazy. Any help will be GREATLY appreciated. Thanks.
trontheman said:
Ok, so i have had a samsung captivate since last summer. I just did the official froyo update the other day and it was successful with kies mini. I then decided to root it using super1click which also worked successfully. I have superuser, titanium backup with busybox installed, and super manager and terminal emulator. I also successfully got clockworkmod flashed and working.
My problem is that ive got the new cognition rom on my internal sd card, but when i try to flash it with cwm, i get the 3e recovery failure message. Ive been reading various sites today on how to fix this problem, but every site seems to tell me something different. I ask this question here, because it seems to be the most knowledgeable site to go to.
How do i get my rooted captivate, with all the above installed and running, to allow me to flash a new rom and possible a new kernal down the road? Im about to go insane trying to decipher through all the info all the different sites have said. Sorry to write such a novel on a tired subject, but im going crazy. Any help will be GREATLY appreciated. Thanks.
Click to expand...
Click to collapse
If you would have done a search here then you would have found that you need to do one of 2 things.
1. Flash back to 2.1
2. Replace the 3e recovery with one that doesnt check for the sig.
I dont know how to replace the 3e recovery. I think ill go with flashing back to 2.1. Once i dl Odin and flash back to 2.1, then i can flash a new rom or a new kernel? Will it undo everything i've done so far? Thanks for the help.
trontheman said:
I dont know how to replace the 3e recovery. I think ill go with flashing back to 2.1. Once i dl Odin and flash back to 2.1, then i can flash a new rom or a new kernel? Will it undo everything i've done so far? Thanks for the help.
Click to expand...
Click to collapse
Here is a link to the replacement recovery.
Make sure you have the right odin and that your 3 button works right.
Yesh doing this will wipe out everything. Make sure to back up. Do not back up system data at all as when you restore it, it can lead to major issues. Once done with a custom rom it will be wiped clean. You will have to redo contacts, email, and all other settings
Thanks. Would it be okay to just flash a new kernel like speedmod kernal and just use the stock rom? Is that possible to do while im on rooted 2.2? I like the rom just fine, i just want it faster mainly. Thanks again.
trontheman said:
Thanks. Would it be okay to just flash a new kernel like speedmod kernal and just use the stock rom? Is that possible to do while im on rooted 2.2? I like the rom just fine, i just want it faster mainly. Thanks again.
Click to expand...
Click to collapse
To be honest I am not sure. I only had the stock on for a few hours as it was just not that great compared to the 2.2.1 rom that I have been used to running. I need BT voice dial and the added exchange options so 2.2 was not really for me. If you want a stock feel but faster then I would go with COG or one of the other roms based on the kb1 rom.
So I've come to the conclusion that I should just flash back to 2.1 and go from there. I have odin downloaded, but I'm not certain how to use it. Do you guys think I should flash a custom rom from stock, or just flash a kernel with lag fix and delete the bloatware? Thanks.
first flash 2.1 stock to get rid of the damn 3e. custom roms dont replace that always. also most custom roms dont flash with odin.
get a stock rom. read the instructions, flash
trontheman said:
So I've come to the conclusion that I should just flash back to 2.1 and go from there. I have odin downloaded, but I'm not certain how to use it. Do you guys think I should flash a custom rom from stock, or just flash a kernel with lag fix and delete the bloatware? Thanks.
Click to expand...
Click to collapse
If you are getting .zip signature errors when trying to flash a rom (because you are using 3e recovery) you will not be able to flash a kernel.
Supercurio did make a KB1 kernel that is installable via Odin. If you install that, you will also get CWM recovery. Then you can flash anything you want.
Either way you will need an Odin program. Either Odin One Click to flash back to stock 2.1 or Odin v1.7 to flash the Supercurio KB1 Kernel .tar file.
trontheman said:
Thanks. Would it be okay to just flash a new kernel like speedmod kernal and just use the stock rom? Is that possible to do while im on rooted 2.2? I like the rom just fine, i just want it faster mainly. Thanks again.
Click to expand...
Click to collapse
Correct me if i'm wrong but I think the speedmod kernal is i9000 based which would cause a major headache/bootloop on the stock rom.
Sent from my SAMSUNG-SGH-I897 using XDA App
Johnnie5000 said:
Correct me if i'm wrong but I think the speedmod kernal is i9000 based which would cause a major headache/bootloop on the stock rom.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
....it works fine on stock 2.2, as does any other 2.2/2.2.1 kernel
Pirateghost said:
....it works fine on stock 2.2, as does any other 2.2/2.2.1 kernel
Click to expand...
Click to collapse
The problem is, the OP has no idea what he's doing. It sounds like he's wanting to flash to 2.1, then add a I9000 kernel. Since he's all over the place, it's hard to decipher what he's thinking.
To the OP. I'd HIGHLY suggest you look for the stickied "how to" video's by Connexxion. They will tell you what you need to do and show you EXACTLY how to do it. Invaluable info for the noobs.
Here is the link your looking for, download the installer zip file at the bottom of the first post. Extract to your fancy, use the install.bat file once extracted. Be sure to have the phone connect to the pc (DO NOT MOUNT) and have USB Debugging on.
Modded 3e recovery that works like 2e
trontheman said:
Ok, so i have had a samsung captivate since last summer. I just did the official froyo update the other day and it was successful with kies mini. I then decided to root it using super1click which also worked successfully. I have superuser, titanium backup with busybox installed, and super manager and terminal emulator. I also successfully got clockworkmod flashed and working.
My problem is that ive got the new cognition rom on my internal sd card, but when i try to flash it with cwm, i get the 3e recovery failure message. Ive been reading various sites today on how to fix this problem, but every site seems to tell me something different. I ask this question here, because it seems to be the most knowledgeable site to go to.
How do i get my rooted captivate, with all the above installed and running, to allow me to flash a new rom and possible a new kernal down the road? Im about to go insane trying to decipher through all the info all the different sites have said. Sorry to write such a novel on a tired subject, but im going crazy. Any help will be GREATLY appreciated. Thanks.
Click to expand...
Click to collapse
I am wanting to flash back to 2.1 and go from there. I have the drivers installed and I have odin downloaded. I tried it last night, but I couldn't get it to work. I got it to download mode, but still nothing. What could the problem be? Thanks.
I tried odin one click again today, but still nothing. All i want to do is flash back to 2.1, root, then flash a rom or custom kernel. Im losing my mind, any more help is greatly appreciated. Thanks.
Bump. Thanks.
trontheman said:
I tried odin one click again today, but still nothing. All i want to do is flash back to 2.1, root, then flash a rom or custom kernel. Im losing my mind, any more help is greatly appreciated. Thanks.
Click to expand...
Click to collapse
ok no need to flash 2.1
get neldars kernel flashing app from the market
get a kernel for froyo without 3e recovery in the dev section. this one is great
http://forum.xda-developers.com/attachment.php?attachmentid=547852&d=1300708475
use neldars app (edit) "sgs kernel flasher" or something to that effect. to flash this kernel
then flash cognition
you can also use odin3 but not the oneclick downloader without the .pit file and flash the same kernel placed in the pda slot.
when you installed keis mini, it installed new WRONG drivers (for odin)
reinstall the original other drivers.
BUT. in your OP all you wanted was to be able to flash COG or something.
ALL you have to do is fix your 3e recovery, SEVERAL people including myself have told you how to fix it. then CWM will work! you dont need a computer to fix 3e if you have root explorer (google it $) .
if you are going to flash a custom rom anyway dont bother going back to 2.1.
if you are going to stay stock, 2.2 is better anyway. (aside from 3e but staying stock dont matter)
you can also use odin3 but not the oneclick downloader without the .pit file and the same kernel placed in the pda slot.
Click to expand...
Click to collapse
@ dani - dude read the thread. odin doesn't recognize his phone.!! try to catch up before butting in...
well that doesn't make my whole post irrelivent. if he is rooted and has busy box he can use neldars kernel flasher. sorry if i over looked something.
Ok, well i got the aio toolbox, and i flashed back to stock. Now im running 2.1-update1. How do i go about rooting now? I cant seem to find a root file. Thanks.
Is it possible to take a certain app or program from a certain rom and like pull it from the rom and install it on a rooted phone? I just rooted my g2x and I want the old LG froyo camera back. Can it get pulled from another rom and installed on my phone without my flashing a new rom?[
Rooted but on gingerbread? Head on over to the development section and check out flak0's mod... Just download it and flash away... Wait! You have clockwork recovery right?
Sent from my LG-P999 using xda premium
To answer your question
generally: yes. However, the LG camera is a special case and a lot of work has gone into making it work on gingerbread. It is possible but you'll need a specific mod over in the Development board.
Sent from my Nexus Prime using XDA Ultimate App
Yes on gingerbread and yes I have the clockwork recovery mod. I'm familiar with this stuff but not an expert, so sorry if these are noob questions but I checked out the thread and there is a bunch of links for the camera. Which one do I download? Im guessing the 3.0 one but Im not sure. And thats the actual cam that I am going to flash on my phone right? Not a new mod? and do I flash it on my phone just like the clockwork mod? I mean the same exact process? Or is this just like an .apk that I install? Can you please help me through the process of getting it on my phone?
http://forum.xda-developers.com/showthread.php?t=1166531
Yeah the 3.0 is the one you want.
Just flash it in Clockwork the way you would flash any rom or kernel.
Before you flash though make sure to wipe cache and dalvik, and just to be safe fix permissions afterwards.
Just to make sure we're on the same page... You flashed clockwork via the NVflash method, right?
and then to get into clockwork to flash other stuff such as roms and this camera, you hold volume down and power from a powered off state, correct?
thanasisc4 said:
Yeah the 3.0 is the one you want.
Just flash it in Clockwork the way you would flash any rom or kernel.
Before you flash though make sure to wipe cache and dalvik, and just to be safe fix permissions afterwards.
Just to make sure we're on the same page... You flashed clockwork via the NVflash method, right?
and then to get into clockwork to flash other stuff such as roms and this camera, you hold volume down and power from a powered off state, correct?
Click to expand...
Click to collapse
Yes I am on clockwork via NVflash. I'm still a bit confused. Sorry if I wasnt clear before. See, the clockwork thing was the only and first thing I flashed. I never flashed a rom or anything. I followed the instructions to root exactly how I saw them. Obviously one step was to flash the clockwork mod. Thats how far my experience with flashing goes. So Im not exactly sure what to do to flash the cam on my phone. I put it on my sd card Im assuming right? Then I do the hold volume down and power to get to whatever that screen is called? After that do I just go to "install zip from sdcard" and look for it? Thats what I assumed but I have no idea why I have to wipe cache or what dalvik is? and why/how do I fix permissions after?
Ok good ur on the right track having CWM installed via NVflash.
Two questions:
1) What version of clockwork are your running?
2) How did you achieve root if the only thing you've ever flashed is clockwork?
That will help me help you.
I think the CWM is 5.020. I got it from this link..
http://forum.xda-developers.com/showthread.php?t=1056847
then to root, all I did was download the root zip file found in this link..
http://forum.xda-developers.com/showthread.php?t=1255214
I followed those steps.
So then you have flashed something in CWM... you flashed the root zip, no?
The same way you flashed the root zip is the same way ur gonna flash the camera, I guess since its not a rom or kernel you don't need to bother wiping catch and fixing permissions:
-Boot into CWM with vol down and power
-select install zip from sd card
-find the camera 3.0 zip on ur sd card, install
-reboot, enjoy
For future reference, when ur ready to flash a custom rom or kernel, add 3 more steps to this process:
-Boot into CWM
-wipe catch partition (in the case that your going from a 2.3.3 rom to a CM7 based rom, this step changes to "wipe data/factory reset")
-advanced, wipe dalvik catch
-install zip from sd card
-find zip and install it
-advanced, fix permissions
Thank you! Just one last quick question. Let's say I flash the cam app. Then later down the road I wanna flash a new rom. Since I gotta wipe everything I would have to flash the cam back to use it on the new rom right?
Yes. However, don't try to flash the LG cam over a CM7-based rom, as it won't work. 2.3.3 based roms are ok.
So what are my options if I don't like the Gingerbread/cm7/AOSP camera?
it sucks big time
Which ROM is the best? I am seriously thinking about flashing a new rom on my phone. I never was but I guess flashing is like a drug, do it once and you'll wanna do it more. well atleast for me lol. I'm asking this because I was looking through the rom options in the other forum and I read something about needing to flash a kernel to overclock, then I saw a CM7 kernel with an overclock preset? Confused me a little. I can flash any rom I want and overclock myself right? Will all roms have a kernel that supports overclocking?
Can you give me the best rom/kernel to flash based what I'm looking for? I would like to overclock to atleast 1.2(Whats the highest I can do without it becoming dangerous for the phone?). I want no bloatware, can a rom free up internal memory? if so, I want that, faster then stock performance and better battery life. The LG camera or atleast a cam app that is better then stock android. I also want stablity in performance. Just for a reference, I was looking at Weapon rom, seems like the best to me, but then again I am new to the whole rom game. I know its based on personal taste, but I would like a little push in the right direction so I dont have to do trial and error with roms.
Thanks in advance for all your help.
pyromaniac1 said:
So what are my options if I don't like the Gingerbread/cm7/AOSP camera?
it sucks big time
Click to expand...
Click to collapse
https://market.android.com/details?id=com.mnapps.cameraadvancelite&hl=en
that is near the same camera, likely the same developers.
Only thing is I think the steady feature was an option on all photo modes on Froyo LG, where here its a specific option itself. I don't remember well enough the old one.
Thanks a lot mate
I have been trying to flash Infused 2.2.3 to my Infuse lately but it never seems to work. No matter what way i choose to boot into clockworkmod to flash the rom it doesn't boot into the red screen always the blue screen (reboot system,reinstall packages, delete all user data, format internal SD card). I have tried downloading the rom from rom manager and downloading at the finish prompt, booting from phone off with the 3 button combo, booting from the "install from sd card" menu in Rom manager. I even found an app that booted into cwm (albeit the wrong one). I downloaded it from ROM manager (wherever that goes) and I put it on my Ex. SD card from my computer (using an adapter not my phone). Did i do something wrong???
Also another problem i found. When I try to download apps from the market app everything gives me a "APP_NAME could not be downloaded due to an error." but when I restart my device it pops up when the media scanner finishes like it just finishes?
If I manages to Flash the ROM will it fix the market???????
It will go back to normal right???
*sorry for my bad grammer, im rather strained at the moment*
CWM is installed by flashing a kernel that has it. What you are seeing is stock recovery. You need to flash the infusion kernel, which has red (voodoo) cwm, and then flash infused from that. There are guides to do this, if I wasn't on my infuse I'd link it, but the kernel needs to be flashed via Odin.
And I'm sure your market woes will disappear with Infused!
Sent from my SAMSUNG-SGH-I997 using XDA App
Perpetrator said:
CWM is installed by flashing a kernel that has it. What you are seeing is stock recovery. You need to flash the infusion kernel, which has red (voodoo) cwm, and then flash infused from that. There are guides to do this, if I wasn't on my infuse I'd link it, but the kernel needs to be flashed via Odin.
And I'm sure your market woes will disappear with Infused!
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
well wait a second... I have already flashed Infused and even another ROM (TEDGY) thru CWM stock from ROM manager. I downloaded Infused and somehow it applied? I checked because A. my battery lasted all day even with extreme usage B. it said i was running infused in the About Phone menu?
If the kernel is what you run first could it be possible I flashed it thru SGS Kernel flasher???
also. CWM doesn't read your external SD card. if your coming from CM7 i believe its screws with the directories and switches the cards around or something like that. I would recommend just flashing the community kernel via odin again.
Okay I have spent the last 3 days flashing kernels and roms Via Odin or CWM and nothing will stick I must be missing something.
My kernel procedure
1. find defuse-kernelv1.4.tar and set as PDA file in Odin
2. put phone into download and start.
3. usually walk off and let the lady yammer on (to calm my nerves)
4. come back and check settings VIOLA!!! I'M BACK STOCK???
What am i missing/doing wrong/have wrong procedure????
I'm hoping to one day peruse this forum with enough know how to help N00BS (like myself) so anything is helpful.
RESOLVED
This is 4th brick and i normally know how to fix it but this time i cant fix it
Ok so one day my phone was acting up it wouldn't turn on
I flashed repartioned and flashed csc/phone/froyo from hawk (ODIN) - everything was ok
Then i flashed gingerbread (odin)- phone turned on everything worked
Afterwards i rooted it (super one click)- it worked
got sgs kernel flasher
Flashed antonx kernel for gb
when i tried to install cm9 it didnt work i checked logs and got this (im using cmr 6.0.1.2)
I: Cant partition unsafe device: /dev/block/mmcb1k0p
I:Cant format unknown volume :/external_sd
I: cant format unknown volume: /emmc
Any ideas?
Also i was trying to do this
flash froyo + everything from hawk
Flash gingerbread
root
get sgs kernel flasher
flash kernel
install cm9
install cm10
restore my cm10 backup
That's a lot of steps that aren't needed.
http://forum.xda-developers.com/showthread.php?t=1358498 2nd post, eollie's one click to stock.
1)Run that, you have stock GB, root, and CWM all in 1 click.
2)Reboot to recovery, wipe and install CM9
3)Profit??
Ill try that
getochkn said:
That's a lot of steps that aren't needed.
http://forum.xda-developers.com/showthread.php?t=1358498 2nd post, eollie's one click to stock.
1)Run that, you have stock GB, root, and CWM all in 1 click.
2)Reboot to recovery, wipe and install CM9
3)Profit??
Click to expand...
Click to collapse
Thanks for the quick reply ill try that
What CM where you trying to install? Are phone doesn't use /emmc or /external_sd. That's why it failing. Wrong zip from the wrong phone. Look under your battery and tell us what the model number says before you go any further and end up with a true brick.
cmr
... after i installed antonx's kernel i tried to install cyanogen mod 9 and i was using the recovery included in that
And yes i know what phone i have.. sgs4g (sgh-t959v)
What Cm9? It's trying to write to partitions that this phone doesn't use. Link the ROM please.
link
Here you go
http://forum.xda-developers.com/showthread.php?t=1730954
That's really weird that your getting those errors. We don't use emmc or external_sd. Heimdall will get you set back up but I've never seen ANYONE in all the time I have had this phone report that error. That's why I was trying to make sure you had the right phone and ROM before you went any further.
now what?
hechoen said:
That's really weird that your getting those errors. We don't use emmc or external_sd. Heimdall will get you set back up but I've never seen ANYONE in all the time I have had this phone report that error. That's why I was trying to make sure you had the right phone and ROM before you went any further.
Click to expand...
Click to collapse
Ok so im back onto stock 2.3.6 and rooted... what kernel do i install? oh yea and hermdal doesnt want to work something net framework isnt installing (keeps on failing) and ive tried downloading it from microsoft too
Well, since antons didn't seem to work for you, flash the other one. lol
http://forum.xda-developers.com/showthread.php?t=1828171
-
how do i go from stock to mtd rom? (im on the "other one" i have a 32 gig sd card with EVERY single rom on that list, every kernel, every modem so basicly i dont have to download them)
before i just installed it through cmr but is that right?
I want to go from stock to cyanogen mod 9 MTD
Im creating a backup right now incase i mess up later
That's will work as long as the recovery is CWM 5.x or later. You used to have to flash CM7 first but I'm pretty sure Team Acid fixed it in the new CM9 build. Just check the MD5 of that zip you where trying to flash. Those errors are very strange and I'm thinking you might have accidentally gotten the wrong CM9.
hechoen said:
That's will work as long as the recovery is CWM 5.x or later. You used to have to flash CM7 first but I'm pretty sure Team Acid fixed it in the new CM9 build. Just check the MD5 of that zip you where trying to flash. Those errors are very strange and I'm thinking you might have accidentally gotten the wrong CM9.
Click to expand...
Click to collapse
Ok im installing..
Also if this works can i just restore my cm10 backup? or do i have to install cm 10 then the backup?
You can try to restore it. If it's the same version of CWM that you backed up from it should work. Just do all the wipes including system and data before you restore. If that doesn't work for some reason just flash CM10 than do an advanced restore of data only.
Works
ok it works... cid kinda scares me
I guess im going to restore my cm10 backup then...
And thanks for all the help
wow i have to wait five minutes between posts that sucks
restore
got an err when trying to restore E:/format_volume: format_rfs_decive failed on system
Guess im going to install cm10 then restore
What an exciting day... i went from froyo to gingerbread to ics and now to jb
Ahh
Ok so i found out that when i flashed kc1 to kc6 on odin i left the repartiton checked... so some files were missing and i guess that was the problem... what is phone efs clear on odin again? isnt it have to do with something with celluar communications
ok everything is back to normal (except a few apps) And thanks for helping out!
Some apps don't restore. Like xda for example. If I restore a backup it will say app not installed. When I reDL it from Play all my settings are still there though. So it's saving the cache and not the app. I've never really cared enough to look into it. lol
Hi everyone, I have been searching this forum to find a CWM that is compatible with KitKat and the infuse 4g. I tried the ROM manager app, but this device is not compatible. Plus I'm trying to meet the post requirement before I can ask this question in dev forum...not a great rule. cuz that way i have to post 10 posts that i don't want to post before I post the one I want.
beofonemind said:
Hi everyone, I have been searching this forum to find a CWM that is compatible with KitKat and the infuse 4g. I tried the ROM manager app, but this device is not compatible. Plus I'm trying to meet the post requirement before I can ask this question in dev forum...not a great rule. cuz that way i have to post 10 posts that i don't want to post before I post the one I want.
Click to expand...
Click to collapse
you just have to flash the roms from the base rooted GB with CWM/RED recovery then update GB ---> ICS----->JB----->KK and the CWM version updates itself and each KK rom has its own CWM version
Thanks.
Thank you.
Young_Azul said:
you just have to flash the roms from the base rooted GB with CWM/RED recovery then update GB ---> ICS----->JB----->KK and the CWM version updates itself and each KK rom has its own CWM version
Click to expand...
Click to collapse
Do you need to flash in that order.. GB > ICS > JB > KK ? because I just flashed GB with CWM then to whatever next rom happen to be without issue. Each version got it's own kernel/cwm so why need to go thru all that. Just curious.
scmfxt said:
Do you need to flash in that order.. GB > ICS > JB > KK ? because I just flashed GB with CWM then to whatever next rom happen to be without issue. Each version got it's own kernel/cwm so why need to go thru all that. Just curious.
Click to expand...
Click to collapse
its recommended....i have tried to jump from gb to kk before but then it wouldn't boot the rom so i put into download mode and went back to stock gb the went to ics then jb then every kk rom out there
Hmm.. weird because I have no issue jumping from GB to the current KK or any other rom.. you just need to turn lagfix off b4 u install other rom.
scmfxt said:
Hmm.. weird because I have no issue jumping from GB to the current KK or any other rom.. you just need to turn lagfix off b4 u install other rom.
Click to expand...
Click to collapse
is yours the rogers or AT&T one?
AT&T
scmfxt said:
AT&T
Click to expand...
Click to collapse
so is mine thats strange that yours has no problem doing it while mine does
Young_Azul said:
so is mine thats strange that yours has no problem doing it while mine does
Click to expand...
Click to collapse
ok.. I just re-flash to stock a few minutes ago and flash kernel for cwm.. now will install the new 4.4.3 and Gapps. And not going go thru ICS or JB.
scmfxt said:
ok.. I just re-flash to stock a few minutes ago and flash kernel for cwm.. now will install the new 4.4.3 and Gapps. And not going go thru ICS or JB.
Click to expand...
Click to collapse
So I'm guessing your going with CarbonRom's 6/15 nightly?
Sent from my SGH-I997 using XDA Premium 4 mobile app
yep.. let see what 4.4.3 has to offer. Got a couple of days to play around.
For some devices flashing straight from stock just works. If you have red CWM it is a bad candidate and should use ICS as an intermediary. But you can be on GB and not have red CWM (rather blue or green I forget which), as was the case when I first flashed up. This may be your case as well.
Its not the version of the OS that matters, rather the spread of CWM versions. At least that is my understanding of the situation.
Sent from my MyTouch 4G Slide using XDA Free mobile app
I think it's a matter of steps you take from GB to the next rom. For me:
1. GB stock with root.
2. Install sgs kernel flash and flash kernel with CWM (Synthesis).
3. Go into CWM and disable lagfix if it's enabled.
4. Update your flavor rom in recovery mode. NOTE: You will need to flash twice since 1st time give you a warning about partitions.
5. Once flashed it will auto reboot.... HERE you need to remove the battery to power off.. put battery back in and go into recovery mode and flash the rom again since the previous flash only install the new recovery.
6. Install Gapp.
7. CWM: wipe Cache Partition
8. CWM: Advanced > wipe Dalvik Cache
9. Reboot.
scmfxt said:
I think it's a matter of steps you take from GB to the next rom. For me:
1. GB stock with root.
2. Install sgs kernel flash and flash kernel with CWM (Synthesis).
3. Go into CWM and disable lagfix if it's enabled.
4. Update your flavor rom in recovery mode. NOTE: You will need to flash twice since 1st time give you a warning about partitions.
5. Once flashed it will auto reboot.... HERE you need to remove the battery to power off.. put battery back in and go into recovery mode and flash the rom again since the previous flash only install the new recovery.
6. Install Gapp.
7. CWM: wipe Cache Partition
8. CWM: Advanced > wipe Dalvik Cache
9. Reboot.
Click to expand...
Click to collapse
Because I have the Rogers variety, my step 2 uses a different product (the name escapes me but I use ODIN to flash it) and I was able to skip over step 3 (not sure if it was even an option). Overall I had red CWM, but the first time CWM was green (or blue). I think the difference in versions had to do that I installed ROM Manager the first time around and tried to install the i9000 (or something) CWM image. It wasn't successful, but it looks like it made some impact.
Out of curiousity, what colour was your CWM in Gingerbread? Synthesis may be using a newer (more forgiving) version.
red cwm 2.5.1.3 after the kernel flashed.