Sorry to beat a dead horse, bout to go insane - Captivate General

Ok, so i have had a samsung captivate since last summer. I just did the official froyo update the other day and it was successful with kies mini. I then decided to root it using super1click which also worked successfully. I have superuser, titanium backup with busybox installed, and super manager and terminal emulator. I also successfully got clockworkmod flashed and working.
My problem is that ive got the new cognition rom on my internal sd card, but when i try to flash it with cwm, i get the 3e recovery failure message. Ive been reading various sites today on how to fix this problem, but every site seems to tell me something different. I ask this question here, because it seems to be the most knowledgeable site to go to.
How do i get my rooted captivate, with all the above installed and running, to allow me to flash a new rom and possible a new kernal down the road? Im about to go insane trying to decipher through all the info all the different sites have said. Sorry to write such a novel on a tired subject, but im going crazy. Any help will be GREATLY appreciated. Thanks.

trontheman said:
Ok, so i have had a samsung captivate since last summer. I just did the official froyo update the other day and it was successful with kies mini. I then decided to root it using super1click which also worked successfully. I have superuser, titanium backup with busybox installed, and super manager and terminal emulator. I also successfully got clockworkmod flashed and working.
My problem is that ive got the new cognition rom on my internal sd card, but when i try to flash it with cwm, i get the 3e recovery failure message. Ive been reading various sites today on how to fix this problem, but every site seems to tell me something different. I ask this question here, because it seems to be the most knowledgeable site to go to.
How do i get my rooted captivate, with all the above installed and running, to allow me to flash a new rom and possible a new kernal down the road? Im about to go insane trying to decipher through all the info all the different sites have said. Sorry to write such a novel on a tired subject, but im going crazy. Any help will be GREATLY appreciated. Thanks.
Click to expand...
Click to collapse
If you would have done a search here then you would have found that you need to do one of 2 things.
1. Flash back to 2.1
2. Replace the 3e recovery with one that doesnt check for the sig.

I dont know how to replace the 3e recovery. I think ill go with flashing back to 2.1. Once i dl Odin and flash back to 2.1, then i can flash a new rom or a new kernel? Will it undo everything i've done so far? Thanks for the help.

trontheman said:
I dont know how to replace the 3e recovery. I think ill go with flashing back to 2.1. Once i dl Odin and flash back to 2.1, then i can flash a new rom or a new kernel? Will it undo everything i've done so far? Thanks for the help.
Click to expand...
Click to collapse
Here is a link to the replacement recovery.
Make sure you have the right odin and that your 3 button works right.
Yesh doing this will wipe out everything. Make sure to back up. Do not back up system data at all as when you restore it, it can lead to major issues. Once done with a custom rom it will be wiped clean. You will have to redo contacts, email, and all other settings

Thanks. Would it be okay to just flash a new kernel like speedmod kernal and just use the stock rom? Is that possible to do while im on rooted 2.2? I like the rom just fine, i just want it faster mainly. Thanks again.

trontheman said:
Thanks. Would it be okay to just flash a new kernel like speedmod kernal and just use the stock rom? Is that possible to do while im on rooted 2.2? I like the rom just fine, i just want it faster mainly. Thanks again.
Click to expand...
Click to collapse
To be honest I am not sure. I only had the stock on for a few hours as it was just not that great compared to the 2.2.1 rom that I have been used to running. I need BT voice dial and the added exchange options so 2.2 was not really for me. If you want a stock feel but faster then I would go with COG or one of the other roms based on the kb1 rom.

So I've come to the conclusion that I should just flash back to 2.1 and go from there. I have odin downloaded, but I'm not certain how to use it. Do you guys think I should flash a custom rom from stock, or just flash a kernel with lag fix and delete the bloatware? Thanks.

first flash 2.1 stock to get rid of the damn 3e. custom roms dont replace that always. also most custom roms dont flash with odin.
get a stock rom. read the instructions, flash

trontheman said:
So I've come to the conclusion that I should just flash back to 2.1 and go from there. I have odin downloaded, but I'm not certain how to use it. Do you guys think I should flash a custom rom from stock, or just flash a kernel with lag fix and delete the bloatware? Thanks.
Click to expand...
Click to collapse
If you are getting .zip signature errors when trying to flash a rom (because you are using 3e recovery) you will not be able to flash a kernel.
Supercurio did make a KB1 kernel that is installable via Odin. If you install that, you will also get CWM recovery. Then you can flash anything you want.
Either way you will need an Odin program. Either Odin One Click to flash back to stock 2.1 or Odin v1.7 to flash the Supercurio KB1 Kernel .tar file.

trontheman said:
Thanks. Would it be okay to just flash a new kernel like speedmod kernal and just use the stock rom? Is that possible to do while im on rooted 2.2? I like the rom just fine, i just want it faster mainly. Thanks again.
Click to expand...
Click to collapse
Correct me if i'm wrong but I think the speedmod kernal is i9000 based which would cause a major headache/bootloop on the stock rom.
Sent from my SAMSUNG-SGH-I897 using XDA App

Johnnie5000 said:
Correct me if i'm wrong but I think the speedmod kernal is i9000 based which would cause a major headache/bootloop on the stock rom.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
....it works fine on stock 2.2, as does any other 2.2/2.2.1 kernel

Pirateghost said:
....it works fine on stock 2.2, as does any other 2.2/2.2.1 kernel
Click to expand...
Click to collapse
The problem is, the OP has no idea what he's doing. It sounds like he's wanting to flash to 2.1, then add a I9000 kernel. Since he's all over the place, it's hard to decipher what he's thinking.
To the OP. I'd HIGHLY suggest you look for the stickied "how to" video's by Connexxion. They will tell you what you need to do and show you EXACTLY how to do it. Invaluable info for the noobs.

Here is the link your looking for, download the installer zip file at the bottom of the first post. Extract to your fancy, use the install.bat file once extracted. Be sure to have the phone connect to the pc (DO NOT MOUNT) and have USB Debugging on.
Modded 3e recovery that works like 2e
trontheman said:
Ok, so i have had a samsung captivate since last summer. I just did the official froyo update the other day and it was successful with kies mini. I then decided to root it using super1click which also worked successfully. I have superuser, titanium backup with busybox installed, and super manager and terminal emulator. I also successfully got clockworkmod flashed and working.
My problem is that ive got the new cognition rom on my internal sd card, but when i try to flash it with cwm, i get the 3e recovery failure message. Ive been reading various sites today on how to fix this problem, but every site seems to tell me something different. I ask this question here, because it seems to be the most knowledgeable site to go to.
How do i get my rooted captivate, with all the above installed and running, to allow me to flash a new rom and possible a new kernal down the road? Im about to go insane trying to decipher through all the info all the different sites have said. Sorry to write such a novel on a tired subject, but im going crazy. Any help will be GREATLY appreciated. Thanks.
Click to expand...
Click to collapse

I am wanting to flash back to 2.1 and go from there. I have the drivers installed and I have odin downloaded. I tried it last night, but I couldn't get it to work. I got it to download mode, but still nothing. What could the problem be? Thanks.

I tried odin one click again today, but still nothing. All i want to do is flash back to 2.1, root, then flash a rom or custom kernel. Im losing my mind, any more help is greatly appreciated. Thanks.

Bump. Thanks.

trontheman said:
I tried odin one click again today, but still nothing. All i want to do is flash back to 2.1, root, then flash a rom or custom kernel. Im losing my mind, any more help is greatly appreciated. Thanks.
Click to expand...
Click to collapse
ok no need to flash 2.1
get neldars kernel flashing app from the market
get a kernel for froyo without 3e recovery in the dev section. this one is great
http://forum.xda-developers.com/attachment.php?attachmentid=547852&d=1300708475
use neldars app (edit) "sgs kernel flasher" or something to that effect. to flash this kernel
then flash cognition
you can also use odin3 but not the oneclick downloader without the .pit file and flash the same kernel placed in the pda slot.

when you installed keis mini, it installed new WRONG drivers (for odin)
reinstall the original other drivers.
BUT. in your OP all you wanted was to be able to flash COG or something.
ALL you have to do is fix your 3e recovery, SEVERAL people including myself have told you how to fix it. then CWM will work! you dont need a computer to fix 3e if you have root explorer (google it $) .
if you are going to flash a custom rom anyway dont bother going back to 2.1.
if you are going to stay stock, 2.2 is better anyway. (aside from 3e but staying stock dont matter)
you can also use odin3 but not the oneclick downloader without the .pit file and the same kernel placed in the pda slot.
Click to expand...
Click to collapse
@ dani - dude read the thread. odin doesn't recognize his phone.!! try to catch up before butting in...

well that doesn't make my whole post irrelivent. if he is rooted and has busy box he can use neldars kernel flasher. sorry if i over looked something.

Ok, well i got the aio toolbox, and i flashed back to stock. Now im running 2.1-update1. How do i go about rooting now? I cant seem to find a root file. Thanks.

Related

Help!

Soft bricked(total noob) just got the JIG, got into download menu.
Can someone give me instructions on how to get back to stock, gain root, and install custom ROMS/ MIUI
It be very appreciated, i'm doing this for a buddy and i don't want to give him a brick lol.
1. for restoring stock : http://forum.xda-developers.com/showthread.php?t=731989
2. use superoneclick to root
3. Install clockwork recovery and rom manager
4. Install custom roms.
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
b-eock said:
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Pretty sure it came with 2.2 but not sure.
Then I wouldn't do that 2.1 Odin one click.... Look for a stock 2.2 Odin or Heimdall, make sure to read thoroughly too.
b-eock said:
Then I wouldn't do that 2.1 Odin one click.... Look for a stock 2.2 Odin or Heimdall, make sure to read thoroughly too.
Click to expand...
Click to collapse
See thats the thing i hate to be a pain but im looking for detailed instructions.
b-eock said:
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
thank you for pointing it out
OP might want to look at these threads:
http://forum.xda-developers.com/showthread.php?p=15330252
http://forum.xda-developers.com/showthread.php?t=963403
Note: as b-eock pointed out, make sure what was your stock version before restoring it!
I've always just flashed newer than my stock to avoid that problem and it always works well for me, after bricking or when i want to flash a new rom i flash to cappy gingerbread and flash boog kernal to get CWM(clockworkmod). CWM is essential is you plan on flashing to other roms. If you plan on flashing to another rom anyways it doesn't matter which version of stock you load as long as it work so I'd just flash 2.2 or newer.
http://forum.xda-developers.com/showthread.php?t=1300843
- this has all the odin 1-click flashable packages for captivate
To do everything you want to do...
flash back to stock, use 2.2 or one of the 2.3 versions. If you plan on flashing to a gingerbread rom (2.3) you'll most likely need the gingerbread bootloaders, if you don't originally flash a odin package with the gingerbread bootloaders you might be asked to install them later depending on what rom you use
incase you don't know odin is the computer program used to flash one click packages, you can find it by searching XDA, one click packages won't require it.
odin has to be open before you plug the usb into the phone putting it into download mode.
to flash to other roms you need CWM (ClockWorkMod-a customized recovery mode for the phone) the thread in this post has links to odin flashable kernals with CWM for each software build. To get CWM flash the respective kernal for the version you use. You'll need odin to flash the new kernal, its essentially stock apart from CWM. In odin select PDA and browse to the kernal zip to flash it.
you can search around XDA for oneclickroots, they will typically be odin or CWM flashable it's quite straight forward. New roms will typically already be rooted so you shouldn't have to root again.
good luck!
Does anyone know which exact ODIN i need to flash to get back to 2.2 from download mode.
You can use adamoutler's uckb2 heimdall one click. That's stock 2.2.
But whitch ODIN do i use.
Gez, HTC is so much easier then this samsung!
David522d said:
But whitch ODIN do i use.
Gez, HTC is so much easier then this samsung!
Click to expand...
Click to collapse
Unfortunately, there is currently no Odin one-click of stock Froyo (at least that I'm aware of). If you want stock Froyo, you'll need to either piece it together with full Odin, or use the Heimdall One-Click.
jmtheiss said:
Unfortunately, there is currently no Odin one-click of stock Froyo (at least that I'm aware of). If you want stock Froyo, you'll need to either piece it together with full Odin, or use the Heimdall One-Click.
Click to expand...
Click to collapse
*Update*
I flashed the 2.2 from this http://www.mobiletechvideos.com/blog/?page_id=186
Now i need to root and install recovery please SOMEONE HELP ME!!!! im so ****ty with this crap. Soon as i get recovery ill be straight.
David522d said:
*Update*
I flashed the 2.2 from this http://www.mobiletechvideos.com/blog/?page_id=186
Now i need to root and install recovery please SOMEONE HELP ME!!!! im so ****ty with this crap. Soon as i get recovery ill be straight.
Click to expand...
Click to collapse
Take a look in this post. That should get you the right 3E recovery.
Once you have that, you can either use ROM Manager to install CWM recovery, or see if you can find a kernel with it already baked in and use ODIN to flash the kernel (look for the speedmod kernel).
Or you could flash stock GB, but that updates bootloaders and is a whole different can of worms.
jmtheiss said:
Take a look in this post. That should get you the right 3E recovery.
Once you have that, you can either use ROM Manager to install CWM recovery, or see if you can find a kernel with it already baked in and use ODIN to flash the kernel (look for the speedmod kernel).
Or you could flash stock GB, but that updates bootloaders and is a whole different can of worms.
Click to expand...
Click to collapse
wouldnt it be better to root first? My focus is just getting MIUI on this thing
Another update.
I rooted the 2.2 im on and now enabled non market apps to be downloaded.
Can someone now tell me how to install recovery and install custom ROMS!
i know i know im annoying, im sorry!
David522d said:
wouldnt it be better to root first? My focus is just getting MIUI on this thing
Click to expand...
Click to collapse
Normally, the answer would be yes. However, as part of the Froyo update, AT&T managed to mess up the recovery menu, meaning that it won't flash unsigned packages. This makes getting CWM basically impossible without doing the steps in that post or flashing a different kernel.
You can root if you want to, but doing the steps in that post first will save you some headache.
jmtheiss said:
Normally, the answer would be yes. However, as part of the Froyo update, AT&T managed to mess up the recovery menu, meaning that it won't flash unsigned packages. This makes getting CWM basically impossible without doing the steps in that post or flashing a different kernel.
You can root if you want to, but doing the steps in that post first will save you some headache.
Click to expand...
Click to collapse
I already rooted =/ , should i still try this?
If you have full ODIN, go here, and download the kernel labeled "speedmod-kernel-i897-k13c-500hz.tar" at the end of the first post. Open Odin, and in the "PDA" slot, navigate to the .tar file and flash it. That will get you the speedmod kernel, which has CWM, which you need to be able to flash.
Once it's flashed, just hold V+/V-/Power until it reboots, and then you'll be in CWM and can flash MIUI.
I'm assuming you've backed up all your apps with Titanium Backup, right? If you haven't, do that before you do anything else so you don't lose them.
jmtheiss said:
If you have full ODIN, go here, and download the kernel labeled "speedmod-kernel-i897-k13c-500hz.tar" at the end of the first post. Open Odin, and in the "PDA" slot, navigate to the .tar file and flash it. That will get you the speedmod kernel, which has CWM, which you need to be able to flash.
Once it's flashed, just hold V+/V-/Power until it reboots, and then you'll be in CWM and can flash MIUI.
I'm assuming you've backed up all your apps with Titanium Backup, right? If you haven't, do that before you do anything else so you don't lose them.
Click to expand...
Click to collapse
Im not sure if i have "FULL" ODIN. I have the ODIN i just used to install 2.2. Then i rooted it using SUPER1CLICK.
Where do i get the full odin

[Q] About Rom Manager

Hi guys, after reading the ten commandments for my SGS 4G. i noticed that we shouldn't install a ROM manager and well, you guessed it right, I installed the dreaded rom manager. Fortunately, I havent used it to flash my phone because I cant get to CWM recovery mode. But I have a few questions:
1. I used the rom manager feature to flash CWM. does this affect my phone in any way if i will use the correct way to flash my phone using odin?
2. I tried to reinstall the update.zip in 3e recovery. It failed and I didnt tried it since then. same question with #1 (does this affect my phone in any way if i will use the correct way to flash my phone using odin?)
Lastly, do I need to flash my phone again to stock if i decide to try using a custom rom?
By the way, I have the T-Mobile SGS 4g T959V, 2.2.1 firmware, 2.6.32.9 kernel and KD1 build number.
Thanks in advance... I would really appreciate the help because I want to learn to customize my phone in the right way...
LarsonJayz said:
Hi guys, after reading the ten commandments for my SGS 4G. i noticed that we shouldn't install a ROM manager and well, you guessed it right, I installed the dreaded rom manager. Fortunately, I havent used it to flash my phone because I cant get to CWM recovery mode. But I have a few questions:
1. I used the rom manager feature to flash CWM. does this affect my phone in any way if i will use the correct way to flash my phone using odin?
2. I tried to reinstall the update.zip in 3e recovery. It failed and I didnt tried it since then. same question with #1 (does this affect my phone in any way if i will use the correct way to flash my phone using odin?)
Lastly, do I need to flash my phone again to stock if i decide to try using a custom rom?
By the way, I have the T-Mobile SGS 4g T959V, 2.2.1 firmware, 2.6.32.9 kernel and KD1 build number.
Thanks in advance... I would really appreciate the help because I want to learn to customize my phone in the right way...
Click to expand...
Click to collapse
Just ODIN the KD1 Bali kernel. DONE!
krylon360 said:
Just ODIN the KD1 Bali kernel. DONE!
Click to expand...
Click to collapse
I'm going to try this later... thanks...

[Q][HELP]: captivate stuck at boot after clockworkmod install

Hi all, hope you can help. I installed clockworkmod recovery onto my wife's captivate, and now it won't boot - it's stuck at the "galaxy-S" screen.....I can get it into the YELLOW TRIANGLE screen and once managed to get it into the clockworkmod menu screen.
I believe the phone has android 2.3, not 2.2 on it and this might have been my mistake. The entry point into the kernel is likely different...
how can i fix this? do i need to remove clockworkmod and go back to the stock bootloader? The phone is not rooted, yet (that was the next step).
I haven't been able to find anything in the forums about people that have done (the stupid thing that I did) and installed clockworkmod on a 2.3 phone.
Thanks.
How exactly did you flash cwm? You shouldn't even be able to cause if 3e recovery signature verification?
If you can get to the yellow android screen, that's download mode. You're actually in a good place right now.
To fix where you are, take a look at the development section - there's a post about One-click stock packages. If you're sure she was on Gingerbread, grab one of the non-bootloader Gingerbread stock packages and flash that from download mode.
If you're not sure, I would suggest grabbing one of the Gingerbread stock packages with bootloaders (just to make sure).
In either case, see if you can find a one-click package with ClockworkMod Recovery baked into the kernel (it should say on the post which ones have it). That way you can flash what you want right out of the gate.
thanks. i am quite sure it has gingerbread. the person i bought it from said they did a kies update to 2.3.
i was following the instructions from the cyanogenmod wiki for the captivate: hxxp://wiki.cyanogenmod.com/wiki/Samsung_Captivate:_Full_Update_Guide
after it finished installing the "clockworkmod recovery" i got into this bind. are those instructions for froyo only?
If you followed the instructions about flashing the speedmod kernel, that's where it's hanging. You've got a froyo kernel with a GB rom. Not a big deal, but Android isn't happy about it. Flash a stock GB package, or find a GB kernel with CWM (like boog's) and flash that and you should be ok.
thanks. do i do this using ODIN or heimdall? I installed CWM using heimdall, and in my frantic reading i thought i saw something about installing stock bootloader/rom packages with ODIN after installing CWM could brick it? Or did I misread that?
dolhop said:
thanks. do i do this using ODIN or heimdall? I installed CWM using heimdall, and in my frantic reading i thought i saw something about installing stock bootloader/rom packages with ODIN after installing CWM could brick it? Or did I misread that?
Click to expand...
Click to collapse
Using heimdall is fine (it's also my personal preference between the two, but either will work).
With where you're at, you really shouldn't need to flash any bootloaders. That's pretty much the only area where there is a real risk of hard bricking the phone.
Since Heimdall worked for you once, I'd suggest grabbing the Heimdall one-click I made that's in my signature. You don't need to open it in Heimdall - just download, double-click it, and let it get ready to run. Then connect the phone in download mode and click "flash". You'll have the stock GB rom, with Boog's kernel and CWM all ready to go. You can then flash CM7 from recovery there (you'll probably have to flash it twice, though).
On a side note - flashing stock will wipe your apps. I'm assuming you backed everything up before this. If not, you might need to try and just flash a kernel first, do your backups, then go from there.
(Should you want to do that, go here, grab the one from the "Here is the odin flashable version flash it first if your on stock: Link Mirror" set of links, and then flash that in Heimdall.)
wow, thanks guys, i can breathe easier now. jmtheiss, i got it reflashed to UCKH3 using your one-click package (though now it is AT&T rather than rogers, but i really don't care as long as it works!).
does the one-click root application work with 2.3.4? or is there a more-preferred way to root it now?
Again, thanks so much for the assistance people!
In theory, you should already be rooted (I believe boog's kernel, which was in my one-click, is rooted). If not, go to the bottom of boog's 1st post, and grab the KH3 zip file. Flash that in CWM, and you'll have root permissions.
Or, if you're flashing to CM7, you can just do it from recovery as you are right now. I know from personal experience it works.
thanks everyone. it all worked, and all is good. wife is not an angrybird anymore
dolhop said:
thanks everyone. it all worked, and all is good. wife is not an angrybird anymore
Click to expand...
Click to collapse
Glad to hear that she's not flying over your house shooting explosive eggs. Always a turn for the better.
Had the same problem once before, odin fixed it aswell

need help with getting cm7 from kk4

Have a friend with the kk4 rom which is 2.3.5 . He wants cm7 but the instructions are vague, when he loads up rom manager it doesn't show captivate mtd but only shows the regular galaxy s i900 . What should I do from here ?
ROM manager really needs to die a horrible death and be erased from public memory.
Flash a custom kk4 kernel with Odin that has cwm built into it. Then flash cm7 from there.
No need to even root the damn thing let alone (attempt to) use crappy ROM manager that doesn't work on galaxy devices running over Android 2.1
studacris said:
ROM manager really needs to die a horrible death and be erased from public memory.
Flash a custom kk4 kernel with Odin that has cwm built into it. Then flash cm7 from there.
No need to even root the damn thing let alone (attempt to) use crappy ROM manager that doesn't work on galaxy devices running over Android 2.1
Click to expand...
Click to collapse
did the odin of the kernel samurai and it did its thing and when I reboot to get to recovery doesn't work now I can't even get into the rom
coldconfession13 said:
did the odin of the kernel samurai and it did its thing and when I reboot to get to recovery doesn't work now I can't even get into the rom
Click to expand...
Click to collapse
You may need to flash CM7 twice - A lot of times, the first flash just sets up the MTD file scenario, giving you the CWM you need. The second flash should finish installing it.
Yank battery and replace...hold Vol up Vol down and power til you see the boot screen and let go.
The button combos should work.
got it to work now just trying to load the gapps which seems to not be installing and for some reason it won't recognize the gapps arg this is the weirdest thing.
Just to clarify, if I'm on stock KK4 I can just flash a KK4 ROM with CWM and then CM7? I don't need to be on Froyo, as the CM wiki says?
ArttG12 said:
Just to clarify, if I'm on stock KK4 I can just flash a KK4 ROM with CWM and then CM7? I don't need to be on Froyo, as the CM wiki says?
Click to expand...
Click to collapse
Yes, you can
I need help installing gapps for some reason its not installing it after I load it into cwr . The latest gapps in cwr says its installing 2.3 5 if that means anything
Sent from my Galaxy Nexus using Tapatalk
coldconfession13 said:
I need help installing gapps for some reason its not installing it after I load it into cwr . The latest gapps in cwr says its installing 2.3 5 if that means anything
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
What is the filename of the zip you are trying to install for gapps?
When you say it isn't installing, does it say it completed and nothing happens, or is it failing? If it's failing, does it give you an error?
apbthe3 said:
What is the filename of the zip you are trying to install for gapps?
When you say it isn't installing, does it say it completed and nothing happens, or is it failing? If it's failing, does it give you an error?
Click to expand...
Click to collapse
gapps-gb-20110828-signed
it says completed but nothing shows up in the rom
coldconfession13 said:
gapps-gb-20110828-signed
it says completed but nothing shows up in the rom
Click to expand...
Click to collapse
Forgive me if you already know this, but it only installs apps that can't be downloaded from the market. If you have the market, it worked and you just have to download the rest of them. If you don't have the market, it definitely didn't work and, short of flashing back to stock and trying again, I don't have any other suggestions to troubleshoot it, unfortunately.
gapps-gb-20110930-237-signed
flashing that one fixed my problems thanks guys for helping

Unable to install CWM Recovery on rooted stock rom, a little help please?

Hello!
I just got a pretty good deal on a stock Froyo Infuse 4G, so I bought it.
A little help please! I would love to have the stock ATT rom with the ability to overclock the processor. This is was I have done so far.. plrease don't be so hard on me since this is my first non-HTC device lol.
So the first thing I did was install a "leaked" Gingerbread ATT stock rom using a program called Odin. Then, I root it using that Superoneclick software... I actually clicked a million times instead trying to get it working because I had GingerBread instead of Froyo ... but somehow managed to do it, it is properly rooted and well tested. So! now with my rooted device, I downloaded Rom Manager from the market, flashed it succesfully (at least that's what the screen said)... and when trying to boot into CWM Recovery I got the following errors:
verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
installation aborted.
I tried to flash it via RomManager several times, also did it via SD-Card renaming it to Update.zip and flashing it with the stock recovery.. same error. I searched for more information, someone in the forum said the reason could be an incompatible Kernel, so I flashed the Community V8 Kernel... and my device didn't boot past the Samsung screen... but somehow if I tried manaully to get into CWM recovery, it worked! (just the recovery). Flashed a custom rom that I didn't like... then suddenly I lost the CWM Recovery and cannot then bricked it and was unable to flash it again..
I managed to restore the phone to ATT factory condition using a guide here on Xda (this time the phone kept the leaked GB rom)... then rooted it again and haven't done anything else. Mu question is:
How can I keep this stock rom with the ability to overclock the processor? (flashing different kernels just makes it freeze on boot at Samsung logo).
Thanks for your help!::
here a good start by me:
http://forum.xda-developers.com/showthread.php?t=1437548
Thanks, it is a useful link but I still don't find the answer to my question (or maybe I just don't undertand it).
I am beyond frustration... could anyone please tell me what to do to step by step to flash an overclockable Kernel keeping my GingerBread stock ATT rom? like if you were explaining it to a retarded person?
many thanks...
domenicostorino said:
Thanks, it is a useful link but I still don't find the answer to my question (or maybe I just don't undertand it).
I am beyond frustration... could anyone please tell me what to do to step by step to flash an overclockable Kernel keeping my GingerBread stock ATT rom? like if you were explaining it to a retarded person?
many thanks...
Click to expand...
Click to collapse
1. You need to restore you phone back to stock using gtg's unbrick or heimdall 1 click. (See my post)
2. ATT's GB latest is not rootable thru SOC. You can use odin to flash an insecure kernel (http://forum.xda-developers.com/showthread.php?t=1212485) but you will also need to update superuser binaries and busybox as well. Running the insecure kernel for OC, you will lose the video recorder and video player.
It doesn't sound like you can understand enough yet to do this.
3. If you want a stock att and rooted, go to the dev section:
check out zeus stock 5.2, vagabond or victory. These are GB stock base roms with root already done. There is also dman's deodexed, rooted gb uclb3 already with oc kernel...no video
qkster said:
1. You need to restore you phone back to stock using gtg's unbrick or heimdall 1 click. (See my post)
2. ATT's GB latest is not rootable thru SOC. You can use odin to flash an insecure kernel (http://forum.xda-developers.com/showthread.php?t=1212485) but you will also need to update superuser binaries and busybox as well. Running the insecure kernel for OC, you will lose the video recorder and video player.
It doesn't sound like you can understand enough yet to do this.
3. If you want a stock att and rooted, go to the dev section:
check out zeus stock 5.2, vagabond or victory. These are GB stock base roms with root already done. There is also dman's deodexed, rooted gb uclb3 already with oc kernel...no video
Click to expand...
Click to collapse
Thanks for the info!
The first step has been done, restored the phone using Heimdall one click after bricking it, the phone was restored with a UCKJ4 2.36 GingerBread stock ATT rom (Kernel 2.6.35.7-I997uckj4-cl694350) and I am also rooted using SuperOneClick.
I don't fully understand step two, will try it once I get some more knowledge.
Question about the third step... does HDMI work in any of those custom stock roms? I use HDMI a lot.
domenicostorino said:
Thanks for the info!
The first step has been done, restored the phone using Heimdall one click after bricking it, the phone was restored with a UCKJ4 2.36 GingerBread stock ATT rom (Kernel 2.6.35.7-I997uckj4-cl694350) and I am also rooted using SuperOneClick.
I don't fully understand step two, will try it once I get some more knowledge.
Question about the third step... does HDMI work in any of those custom stock roms? I use HDMI a lot.
Click to expand...
Click to collapse
My Vagabond ROM runs the stock kernel if you follow directions.
HDMI will work. Battery is excellent. Feel free to check it out
qkster said:
My Vagabond ROM runs the stock kernel if you follow directions.
HDMI will work. Battery is excellent. Feel free to check it out
Click to expand...
Click to collapse
Thanks, but is it overclockable?
domenicostorino said:
Thanks, but is it overclockable?
Click to expand...
Click to collapse
you cant have your cake and eat it too.
stock kernel = HDMI. no oc
oc = no HDMI, and currently, no video on some rom

Categories

Resources