Database Info

[Q] What is the best radio for the Inspire 4g

I was wondering what is the best radio for our Inspire 4g's? I am not sure myself, and I haven't been able to find much if the inspire 4g is cross compatible with the Desire HD besides, roms and kernels. I am wondering mainly if I can install the radio 12.35d.60.140fU_26.08.03.07_M from the desire HD forum. I am not sure if it compatible or had any side effects / negative reprecussions.

You'll find that some say that a m2 or the m3 radio give you better battery life but I think that might be a placebo effect. I have the m3 which i have no problems with but I am saying that my good battery life goes towards the CM7 build 28! The radio may have something to do with it. If it does, it's very small if any.

moosefist said:
I was wondering what is the best radio for our Inspire 4g's? I am not sure myself, and I haven't been able to find much if the inspire 4g is cross compatible with the Desire HD besides, roms and kernels. I am wondering mainly if I can install the radio 12.35d.60.140fU_26.08.03.07_M from the desire HD forum. I am not sure if it compatible or had any side effects / negative reprecussions.
Click to expand...
Click to collapse
That is the leaked gingerbread radio? I am running Coredroid v3.2 with leedroid kernel v2.2.8. I flashed that radio just experimenting. For me I had amazing signal better then the m2 and m3, but my battery life drained away like it was cool. Not doing anything on my phone (full charge no wifi no bluetooth, just data). Cell standby used about 20% of my battery in about 3 hours. With the m2 and m3 my cell stand by is around 11% after 15 hours.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I use 26.06.04.14_M on Android Revolution 3.2 and I can't complain. Before that, I used the radio from attn1's root kit and had shotty reception. Since the upgrade, I've had full service. Don't let bars lie to you though. Check your signal strength in the "about phone" section of the settings menu. Watch the dB's - the close to 0, the better.

Going to flash 26.06.04.14_M as recommended in the revolution thread. How do you find battery life on it cblock? I'm very happy with the battery life on the stock radio that came loaded from at&t but I've dropped a few calls today which isn't normally a problem for me, hoping for a stronger signal from the new radio.
Side note, anyone know how to check what band the phone is running on, 850 or 1900?

What RADIO did you settle on and what result?

See post 1414 on this page. Hands down best radio I have used so far. I am in Florida if that really makes a difference. See pictures of GPS and Speeds. Not to mention the best rom IMHO.
http://forum.xda-developers.com/showthread.php?t=965207&page=71

SNadler said:
See post 1414 on this page. Hands down best radio I have used so far. I am in Florida if that really makes a difference. See pictures of GPS and Speeds. Not to mention the best rom IMHO.
http://forum.xda-developers.com/showthread.php?t=965207&page=71
Click to expand...
Click to collapse
Where did you find the radio 12.41.60.19P_26.06.04.14_M?

mj0528 said:
Where did you find the radio 12.41.60.19P_26.06.04.14_M?
Click to expand...
Click to collapse
first post
http://forum.xda-developers.com/showthread.php?t=877295

mj0528 said:
Where did you find the radio 12.41.60.19P_26.06.04.14_M?
Click to expand...
Click to collapse
Hey my bad... Forgot to check back
Battery life is fantastic, especially if you're running Gingerbread. (I'm on cm nightly 32)
Here's the radio:
http://xda.ckgaming.co.uk/db_mirror/Radio_12.41.60.19_26.06.04.14_M.zip
All I can say is do the homework on flashing radios!

Yeah that's the Generic Gingerbread Radio. I flashed it about six hours ago. I have two Inspire's, too. One stock Radio and one with that radio. Where the Stock Radio is getting -110dbi 11asu, this new one gets -93dbi 4asu. Same location.
Not sure what asu is, though. But I do understand the db measurement.

arajay said:
first post
http://forum.xda-developers.com/showthread.php?t=877295
Click to expand...
Click to collapse
He beat me

cblock214 said:
He beat me
Click to expand...
Click to collapse
My bad. I was looking at that thread in another tab. Trying to get the best signal I can in Atlanta.
Sent from my Desire HD using XDA App

help please....
I have an htc inspire 4g unlocked on t-mobile but sometimes the signal just desapears and comes back am wondering what radio would work better any help please...

Jeebus...guys I'm learning all this and having fun flashing new ROMS and trying to find one I can live with for more than a day
Other than my StreakDroid, I've flashed a few custom roms on my wife's captivate and now have the Inspire 4G and love it.
I keep reading ROM's that need Eng S-Off..with tutorials and guides. Then I read how dangerous it can be. I'm considering it and wasn't sure where else to ask this...but is it that risky?
Will the benefits be that much better by doing it? Can I get most custom ROMs to work with stock radio? I really want to do this, but damn, my wife's gonna kill me if I mess up another phone.

I just got my inspire today and rooted it and I'm running CM7 RC4 but flashed the radio listed in the forum but my upload speed still sucks at about 100, am I missing something

This is how I flash radios. works flawlessly. No need for eng-s off this way.
http://forum.xda-developers.com/showthread.php?t=1002226
Here's the md5 checksum checker I use.
http://download.cnet.com/MD5-Checker/3000-2092_4-10410639.html?tag=mncol;1

arajay said:
first post
http://forum.xda-developers.com/showthread.php?t=877295
Click to expand...
Click to collapse
Just loaded that radio. Fairly easy process. Thanks for the link to it though made it easier to find lol.

dkotoric said:
I just got my inspire today and rooted it and I'm running CM7 RC4 but flashed the radio listed in the forum but my upload speed still sucks at about 100, am I missing something
Click to expand...
Click to collapse
I can't get any high than 150 up, and I am running cm7 and this radio as well. I have tried 2 other radios and had same issue. I never tried a speediest after first rooting, so I have no idea if I ever got better uploads.

I am getting -83dBm in columbia SC running the same radio.

[Q] No signal when WiFi is enabled.

So for some reason, anytime wifi is enabled, the packet loss is much larger than what it is with any other device I have ever owned. Anytime the phone is experiencing a drop in signal or loss of packets, the phone connectivity becomes greyed out with the wifi. This leads me to believe there may be a problem with the phone's radio, since the two should not experience signal loss together, right? Any suggestions? Similar experiences? Please HELPPPPPP!
EDIT1: Also, forgot to throw this in there, but my GPS signal will disappear after 5 minutes of use. It will require a reboot to experience any kind of normal connectivity.
EDIT2: I just flashed the updated radio that is recommended for the GingerBeast ROM. (26.06.06.30_M) We will see if that helps at all...
EDIT3: Okay, works wonderfully as far as signal, but still have problems with signal when wireless is on...
EDIT4: Not sure if it makes a difference, but I am overclocking to 1.8Ghz. I have also checked my candyshell case, but I get the same problems both with and without it...
Pics are below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

DEL..........

It's hard to say. I've been watching similar performance, myself, and I will say that something seems goofy, similar to what you describe. I'm starting to wonder if it might be a froyo/gingerbread radio difference, but others have had success using this radio with gb, so I don't know.
I'm using the same radio as you, with the RIL matched. It seems to act up more inside my house, surrounded by big tall trees, which is understandable, but still.
Even though you're using the recommended radio for the ROM, have you tried making absolutely sure the RIL is matched?
Since it's the recommended radio, chances are good that the RIL packaged with the ROM is already the correct one, but it never hurts to double check your RIL version and update if necessary.

What is the RIL?
Sent from my rooted (GingerBeast) overclocked (1.9) HTC Inspire 4G.

theherkman said:
What is the RIL?
Sent from my rooted (GingerBeast) overclocked (1.9) HTC Inspire 4G.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1040986

Thats a full signal.

Ginger Beast is not a sense rom. And is using the recommended radio, so according to that post, there it's no need for me to worry about RIL.
It isn't a full signal. It is a greyed out signal...
Sent from my rooted (GingerBeast) overclocked (1.9) HTC Inspire 4G.

theherkman said:
Ginger Beast is not a sense rom. And is using the recommended radio, so according to that post, there it's no need for me to worry about RIL.
It isn't a full signal. It is a greyed out signal...
Sent from my rooted (GingerBeast) overclocked (1.9) HTC Inspire 4G.
Click to expand...
Click to collapse
You're absolutely correct. That's what I get for having run a sense-based ROM for so long.
EDIT:
Well, now I'm not so sure. Even though the RIL thread I linked does state "not for sense roms," as you pointed out, I was just over in dilli's thread for gingerbeast, the ROM you're running, and dilli himself posted some instructions to somebody about flashing a radio. In that post he says, in so many words, "this already has the correct ril," which left me with the impression RILs DO matter for AOSP roms.
I'd actually like to get clarification on this, myself, but you may want to head over to that thread and ask, if your curious, unless he happens to stop back in this thread, maybe he'll answer here.

Well upon further testing, it seems the signal cuts out when the wifi is weak. Is this what you are experiencing as well?
Sent from my rooted (GingerBeast) overclocked (1.9) HTC Inspire 4G.

theherkman said:
Well upon further testing, it seems the signal cuts out when the wifi is weak. Is this what you are experiencing as well?
Sent from my rooted (GingerBeast) overclocked (1.9) HTC Inspire 4G.
Click to expand...
Click to collapse
I experienced the same thing on CoreDroid. If my wifi connection is weak enough that it's not transferring data, ti will force my whole data connection to fail.

Does core droid use the cm7 kernel?
Sent from my rooted (GingerBeast) overclocked (1.9) HTC Inspire 4G.

theherkman said:
Well upon further testing, it seems the signal cuts out when the wifi is weak. Is this what you are experiencing as well?
Sent from my rooted (GingerBeast) overclocked (1.9) HTC Inspire 4G.
Click to expand...
Click to collapse
Not quite. I actually don't know what I'm experiencing.
My situation isn't quite as discernible as yours. More of a general "something ain't right but I can't put my finger on it" type of thing.
Which makes me think it's more ATT than anything else, for my situation, but once you start flashing roms/radios, it's harder to blame ATT and be completely confident doing so.
Sorry about being so vague and not being of much assistance to you.

Nope. Ver 6.7 uses MDJ's kernel and 6.8 is slated to use LeeDroid kernel.

Blows my theory...
ST3ALTHPSYCH0 said:
Nope. Ver 6.7 uses MDJ's kernel and 6.8 is slated to use LeeDroid kernel.
Click to expand...
Click to collapse
Sent from my rooted (GingerBeast) overclocked (1.9) HTC Inspire 4G.

theherkman said:
Ginger Beast is not a sense rom. And is using the recommended radio, so according to that post, there it's no need for me to worry about RIL.
It isn't a full signal. It is a greyed out signal
Sent from my rooted (GingerBeast) overclocked (1.9) HTC Inspire 4G.
Click to expand...
Click to collapse
I'm by no means saying that what's described in the op doesn't happen, but I don't want anyone confused. The s
ignal in the op is 100% full bars. Sometimes when you switch from wifi to cell data, there's a delay of the os knowing if your signed into a Google account or not. If someones wasn't signed into a Google account, that's exactly what their signal bars would look like when they were full. (They would never turn green). Its a light gray, its very easy to tell when the signal drops, its almost a black on black.
When the signal bars are that color gray that doesn't mean there is no service, they will be the same color as if your not signed into Google, and will eventually go back to green.
As the signal drops, the bars that representing a lost signal are very dark almost black gray.
Ill post the framework images and you can better understand what I'm saying.
Tldr-
If your signal bars are the same color as the pic in the op, you have service- if they look exactly like the op, you have full service.
There's nothing wrong with the signal in that picture, its perfectly normal and the phone still has a full service
If he had no service, the bars would be the same color as the top 3 wifi bars.
Op- basically if your thinking that there's a problem with the pic you posted there's not, perfectly fine.

So basically you are saying the color would mean that I am not signed into google? Weird since I am... What would that mean then?
Posted from my rooted (GingerBeast) overclocked (1.9) HTC Inspire 4G.

theherkman said:
So basically you are saying the color would mean that I am not signed into google? Weird since I am... What would that mean then?
Posted from my rooted (GingerBeast) overclocked (1.9) HTC Inspire 4G.
Click to expand...
Click to collapse
Yes, you are signed in and your wifi/signal bars should normally be green. There's 2 completely different sets of service/wifi bars. One set is exactly as you posted in the pic(not signed in), the other is green. When your signed in and switch to wifi, when your cell data disconnects and wifi comes up , it first loads the grey set of images, then the os realizes your signed into a Google account and the green images are loaded.
Usually they should turn back to green pretty fast(less than a min), but sometimes it takes a little or even just stays gray -and turns back green when wifi is switched back off or whatever.
its not really a rom specific bug, I remember my captivate doing the EXACT same thing on gingerbread.
I was messing with it last night-- toggle wifi on- bars turn from green to grey. They turned back green in about 20 seconds. I know Ive had it before where they stayed grey for a while, but they did eventually go back green.

I have a similar issue as well. But mine is I have no service when the phone is plugged into the charging cord. Whether it be the computer usb port or the charging brick. Seems like I lose a bar or two when it's on charge.

WiFi tether problems? Fixed mine like this.

I am on 3.1 beta 6
Mine did not work until I changed the device profile to Thunderbolt in settings.
Then I changed a few other settings such as
Force WiFi driver reloading (check) *has worked for some*
Routing fix (check) *most important one*
Disable wake-lock (unchecked) -> *this is why you lose connection after your screen turns off*
Hope this helps get a few of you tethering again. I am using jdk new source sense based 1.0 kernel but have tested this on Imo 3.8, 4.1 and 5.0 and worked just fine.
4g was blazing fast to my Droid inc tethered to my Thunderbolt without the 4g power drain.
If I helped you in any way please use the thank you button

Grnlantern79 said:
Disable wake-lock (unchecked) -> this is why you lose connection after your screen turns off.
Click to expand...
Click to collapse
I've never understood that setting and it's default like that. Even Cyanogen copied it.... Why do you have to keep 'using' your phone in order to keep the screen on so that WiFi doesn't shutdown ? Android can multi-task, can it not ?
If there is active usage on WiFi, it should NOT shut off. But it will...

I was told there isn't a way or app to tether w/o getting charged by Verizon anymore.
I'm on stock, but I'm rooted. Is it possible? Best apps? Thank you.
Sent from my ADR6400L using xda premium

You were lied to

system6 said:
I was told there isn't a way or app to tether w/o getting charged by Verizon anymore.
I'm on stock, but I'm rooted. Is it possible? Best apps? Thank you.
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
http://db.tt/nZTglF9n app I use. Follow my directions to use.
If I helped please use the thank you button and donate a free account to my dropbox http://db.tt/uDc7iw7x

system6 said:
I was told there isn't a way or app to tether w/o getting charged by Verizon anymore.
I'm on stock, but I'm rooted. Is it possible? Best apps?
Click to expand...
Click to collapse
I just use default CM7 by ProTekk (Find it under "Unofficial Cyanogen Builds" with Rom Manager). The built in tethering (Both USB & WiFi) works like a charm for me without having to utilize 3rd party apps.

Thanks for the post! Picked up a Thunderbolt recently and spent the last couple days trying to get android-wifi-tether to work. The last piece of the puzzle for me was checking "Routing fix" per your suggestion.

thanks for this thread,I just picked up a thunderbolt also, got tired of my iPhone 4 .. I have been trying to tether for the last day, going to try this out now.

Anyone else having speed issues in AP mode? Ad-hoc works well but in AP it is painfully slow (sub-3g speeds). I've tried every combination of settings in wifi tether and no luck..
Sent from my ADR6400L using XDA App

Can't figure out the problem yet, but i can't get 4g tether speeds (or connectivity half the time) from any 605.5 based rom. Yes i checked for tetherguard.apk to make sure that wasn't my issue. Even the newest AOSP roms (which i know aren't based on that) won't let me get a good connection. I have since reverted back to a 605.3 and 605.0 based and are not having problems. I also tried multiple combos of roms/radios too to see if i could narrow it down and haven't found anything significant. Its possible its just my phone being screwy as i haven't had any of the reboot issues to its about time for some problem! Its working for me now, but if anyone finds out anything about it, let me know, i wouldn't mind testing it.

ROM - Bamf forever 1.9
WiFi tether here http://db.tt/nZTglF9n with settings listed above new
imo kernel 5.0 from GB source. Use the settings above for reference to how to get it working. Here is a snap shot of my daughter Droid incredible running off my 4G x 3 test. Along with my thunderbolt getting similar speeds.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ADR6400L using XDA App

Yea, thats what i used to get with all, but can't seem to with the newest sense or AOSP roms/kernels and newest radios but can fine with older roms/kernels/radios. Same settings. I'm just lost at what else to try. Like i said, quite possible its my bolt hating me.

nbdysreal said:
Yea, thats what i used to get with all, but can't seem to with the newest sense or AOSP roms/kernels and newest radios but can fine with older roms/kernels/radios. Same settings. I'm just lost at what else to try. Like i said, quite possible its my bolt hating me.
Click to expand...
Click to collapse
I would just move back I don't like sense 3.5 on this phone. Sense 3.0 work just fine with everything I want working. Sense 3.5 is fun to try but it is not made for this phone. To much stuff needs to be tweaked for it to function with all the extras we have gotten use to. It's kinda like Droid incredible running sense 3.0 it was slow and sense 3.5 is even slower on that phone. I will stick with Bamf forever since its a smooth ROM and everything i need works on this ROM. Battery life is same as stock if not a little better I can get 10 hours of constant use with WiFi or 3g but anything more is pushing it. Bamf makes great roms but i don't see 3.5 as a daily driver for me. Maybe once rezound launches we will get something that works better with our phones well my phone. 3.5 had that worse battery and most laggy of any roms I have tried and did everything i could think of to tweak it. I tried all 3 roms out at this point, Son of a bliss, invigorated, and gingerbliss
Sent from my ADR6400L using XDA App

Thanks a lot!

worked for me

Grnlantern79 said:
I would just move back I don't like sense 3.5 on this phone. Sense 3.0 work just fine with everything I want working. Sense 3.5 is fun to try but it is not made for this phone. To much stuff needs to be tweaked for it to function with all the extras we have gotten use to. It's kinda like Droid incredible running sense 3.0 it was slow and sense 3.5 is even slower on that phone. I will stick with Bamf forever since its a smooth ROM and everything i need works on this ROM. Battery life is same as stock if not a little better I can get 10 hours of constant use with WiFi or 3g but anything more is pushing it. Bamf makes great roms but i don't see 3.5 as a daily driver for me. Maybe once rezound launches we will get something that works better with our phones well my phone. 3.5 had that worse battery and most laggy of any roms I have tried and did everything i could think of to tweak it. I tried all 3 roms out at this point, Son of a bliss, invigorated, and gingerbliss
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Yeah, i moved back prior to posting. Weird things i have notices are prior to 605.5 the settings you had worked, as thats what i've been using. I went to a stock 605.5 and to killsense and neither of those worked with those settings. So i started messing around with settings and found that the reload wifi drivers unchecked alleviated my problems. Wifi tethered, laptop was ranging from .4 - .6 down, now is back to the old 17-28 down. So if its not working for someone else, toggle settings till it does work.

thanks, bud! it works great for me.

Worked as stated...thanks!

Grnlantern79 said:
ROM - Bamf forever 1.9
WiFi tether here http://db.tt/nZTglF9n with settings listed above new
imo kernel 5.0 from GB source. Use the settings above for reference to how to get it working. Here is a snap shot of my daughter Droid incredible running off my 4G x 3 test. Along with my thunderbolt getting similar speeds.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Thanks for all your work on this. Is this app written by you?
Is there any version of this app in the Marketplace?
Do you know the original source of this app?
You may pm if it is a secret. It looks fantastic but I don't like putting something on my phone if I have no idea what its source is. I know too little about code from unknown sources to "trust it". I've never really seen any app or rom discussed in which the developer's ID (or at least internet ID) was a secret.

I answered this for you over at rootzwiki
Sent from my ADR6400L using XDA App

RADIO [UCLK4] For I727/I727R [09-DEC-2012]

What is it?
Click to expand...
Click to collapse
This is the RADIO pulled from the UCLK4 JellyBean Leak (Samsung) (BIG THANKS to the anonymous source, you know who you are). Note, this has no RIL (it appears the ril interface remains the same), but I have no idea if anything under the hood (device firmware) has changed. But, any case you have the CSC files included which is relevant to touchwiz based ROMS.
Disclaimer
Click to expand...
Click to collapse
You are flashing this at your own risk.
Do NOT
Click to expand...
Click to collapse
* Ask radio questions, read the damn stickies.
* Don't ask will this work on X ROM. Read the stickies about RADIO's in the forum. You will find the answers. Or, for christ sake, search!!
Installation
Click to expand...
Click to collapse
* Upload to your device.
* Check md5sum (download link has the md5sum)
* make sure your device is untethered (do not flash plugged into usb)
* Choose zip from CWM.
* Flash.
Download Link
Click to expand...
Click to collapse
* UCLK4 (For I727 and I727R) Only. Download
* Please see my EMBRYO-5.4 thread for other radios.

reserved
keeping this one

Thank you. Downloading. Will report back here.
Edit: flashed on cm10, 12/6 nightly. All is well.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit: why NOT flash when attached to USB? First time I've seen that. Just curious
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Testing now. So far, same signal strength and speeds. Will be traveling this week and test on LTE.

mindmajick said:
Thank you. Downloading. Will report back here.
Edit: flashed on cm10, 12/6 nightly. All is well.
Edit: why NOT flash when attached to USB? First time I've seen that. Just curious
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Flashing with usb plugged in results in no signal generally. Not sure why.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

tkjeeper said:
Flashing with usb plugged in results in no signal generally. Not sure why.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
That's pretty interesting, considering I did that and had to reflash several times with the UCLF6 modem because I was tethered.
Anyhow, does anyone have any idea's what exactly is changed in this modem, or if it works any better? I've heard modems are really device/location specific; like one may work in one area better, but a different modem works better in a different area.

Thanks for the share
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Can't get a geo location lock with this radio
Edit: reflashed and reflashed kernel and so far all is well

I will have to give this a try. So far UCLF6 has been the best radio for me. UCLI3 was crap (for me) and I've had to ditch it twice.
Sent via the Skyrocket
Quando Omni Flunkus Moritati

WOW. My small little town loves this radio. Literally twice as fast as UCLF6 for me. GPS also works like a charm. Thanks

Working great so far thanks!

Can this be used on the Hercules? I would imagine this resolves some of the signal/call quality issues.

Not for Hercules, as the op states, and on att my lte speeds went 4mbps up from ucli3 on average, hoping call quality Improves immensely, ucli3 has a problem with call volume on my phone

After a full day of use, I have found no bugs whtsoever with the radio and LiquidSmooth ROM. Quick GPS fix and good speeds on LTE or 3G. No dropped data connections or anything else. Looks like a winner for me.

flash 3 hours already. no differece between this and ucli3 for me. both is much better than uclf6.
cm10 stable page recommended the ucli3 radio, so flash back to ucli3.
one question, anyone know where to find the changelog for these radios?? why they keep update the radios if there is no change??

getting the fastest speeds i ever got on this phone, and so far it seems to work better connecting to cingular apn instead of pta for some reason... thanks for the awesome modem!

as the OP states, I flashed at my own risk, on a cm10 by Sean
at first boot it soft reboot, but so far is stable I do see full bars now, will check tomorrow for call quality
speeds remain the same as ucli3 but better than uclf6.

Chiming is as well, just flashed to the CM10 12-9 nightly and I flashed this radio as I was having a **** ton of NO SIM card errors and I was frantically looking for a fix. Thus far, fastest speeds I've seen on LTE and solid bars where I've gone this evening. I'll report back once I head into work and hit the dreaded "dead zone" in my office to see how this radio fares.

onearmedscissor said:
getting the fastest speeds i ever got on this phone, and so far it seems to work better connecting to cingular apn instead of pta for some reason... thanks for the awesome modem!
Click to expand...
Click to collapse
I still get no data connection when in an LTE area using cingular. I do get data using cingular when not in an LTE area. Strange??? I stay on PTA all the time and get data connect in both areas. This has been the case for me with any radio on my skyrocket. Not sure why.

Data connection for me is about 5-10mbps slower than UCLF6 on LTE. No noticeable difference with calls.

[RADIO][UXUMA7] For I727/I727R [19-FEB-2013]

What is it?
Click to expand...
Click to collapse
* This is the RADIO pulled from the Rogers Official UXUMA7 Samsung Jellybean release. Note, this has no RIL (it appears the ril interface remains the same), but I have no idea if anything under the hood (device firmware) has changed. Also, no CSC. If you do NOT know what both the terms mean, search my friend.
Disclaimer
Click to expand...
Click to collapse
You are flashing this at your own risk.
Do NOT
Click to expand...
Click to collapse
* Ask radio questions, read the damn stickies.
* Don't ask will this work on X ROM. Read the stickies about RADIO's in the forum. You will find the answers. Or, for christ sake, search!!
Installation
Click to expand...
Click to collapse
* Upload to your device.
* Check md5sum (download link has the md5sum)
* Usual flashing precautions should be taken.
* Choose zip from CWM.
* Flash.
Download Link
Click to expand...
Click to collapse
* UXUMA7 (For I727 and I727R) Only.
radio-UXUMA7-no-csc-no-ril-cwm.zip (md5sum: 74feb0a98c388ed34680176c03b0d0b6)
* Please see my EMBRYO-5.4 thread for other radios.

Guinea pigging it here. Just flashed the new radio and can simply report it did not fry my phone Running the latest CM10.1, phone booted up normally, shows AT&T as the carrier, LTE:13, normal amount of bars for me. Can't really see any difference at all between this and LL3 I was running. Haven't made any calls yet though, am hoping it eliminates the 1-2 delay in voice transmission that happens sometimes.

tested between UCL3 and this... not a big difference coming from winnipeg, manitoba canada. 3-4 dbm

So far working fine with i727R on Rogers, CM10.1 latest nightly. Thanks!

Working good for me. On aokp 4.2.2. Seems to have an average of 3-4 dbm gain over the ics modems I was using. That's on lte btw.
Actually noticing 5 dbm to 7dbm increase on lte and hspa.
Nice work
Sent from my SGH-I727 using xda app-developers app

anyone notice increase or decrease in in-call quality at all? Mine seems the same

Nice work mohan thanks will report back
I love this radio full bars lte not once dropped to 4g now to test at work

I cant honestly tell if this works better for me (edmonton, ab) than ucll3, but both work well!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Anyone tested with SuperLite CM10 JB 4.1.2? Currently using UXLF3 but LTE is not working here in Toronto, Canada on Rogers network.

Tested on mohan_kr's Embryo 6.3 working perfectly. -cpt obv
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Significant improvement here in Northern California.
:good::good::good:

Does this mean we will have embryo 6.5 or 7.0 or whatever mohan calls it based off an official release?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

-Graff- said:
Tested on mohan_kr's Embryo 6.3 working perfectly. -cpt obv
Significant improvement here in Northern California.
:good::good::good:
Click to expand...
Click to collapse
Thank you! This is the exact data I needed, I'll be flashing very soon. As always, good work mohan! :good:

This radio looks to perform better here in Lex, KY than ucll3...better signal and about the same in data...
Thanks mohan man

update signal the same, but data speeds slightly better than ucll3. in call quality is the same

so.... I may be crazy, but...
caveat: Just switched from SlimBean 3.1 to AoCp/AOKP (tried both) witch I'm not too familiar with, so it could be me....
I have tried this new modem and it works fine for a while (2-4 hours) (WiFi off), but then I'll lose signal... reboots won't get it back, no internet.
But, if I turn on WiFi, the radio comes back...
(downgraded back to the LL3 modem and did not see this issue, but I may not have been patient enough)
-rob

Thanks for this Mohan. In SE Florida AT&T increased both carrier signal and WiFi.
Sent from my SAMSUNG-SGH-I727 using xda premium

daviebeach said:
Thanks for this Mohan. In SE Florida AT&T increased both carrier signal and WiFi.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Wi-Fi has nothing to do with radio... The Wi-Fi drivers are kernel based...

That said, networking function is both kernel and framework based, so odds are the radio firmware conflicts somewhere within that Rom's configuration.
The radio is solid for sure, but it may not be compatible with the more recent kernel or api's used in aosp, and stock uses an older version of both. Odds are the kernel or framework could use patching.
If you enjoy that specific Rom and don't mind supporting the dev, i bet they'd benefit from seeing a log from the issues with this radio.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

robcore said:
That said, networking function is both kernel and framework based, so odds are the radio firmware conflicts somewhere within that Rom's configuration.
The radio is solid for sure, but it may not be compatible with the more recent kernel or api's used in aosp, and stock uses an older version of both. Odds are the kernel or framework could use patching.
If you enjoy that specific Rom and don't mind supporting the dev, i bet they'd benefit from seeing a log from the issues with this radio.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Correct and in our case I believe we have the integrated chip and the F/W is included in the ROM (I haven't checked whether it is the same as the ICS). So the kernel is in play and F/W to emit the right instructions for network type changes.
I know for sure that SAMMY has changed the RIL implementation with their JB version whatever secret they know from the OEM, that is why the older radios do not work anymore. The open source derivatives are pretty much out of luck unless they reverse engineer (even though libRIL is open) for the best performance. I am not complaining, I have been getting significant improvement with the JB Radios and Sammy JB derived ROMS..

mohan_kr said:
I am not complaining, I have been getting significant improvement with the JB Radios and Sammy JB derived ROMS..
Click to expand...
Click to collapse
Agreed, over all Samsung delivered quality with jb the likes not seen before by their stock firmware until now. A major factor seems to be the relative standardization of features and implementation across devices with similar capability, amongst a ton of other improvements.
Who knew that our obscure little s2 variant would turn out to be a powerhouse if utilized to their full potential, eh?
If only our hw collection wasn't so obscure, Mo ; ) if only.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2