As stated in title just flashed through the sd, installed correctly and everything however rebooted the phone, now showing grey android icon with "android" below? thinking this may be some startup screen as I am able to turn off and bring magloader back. any suggestions, or is this just the startup screen and I need to be patient??
Related
Hi, I've got the HTC Touch Pro (Raphael)
And I've had it in my drawer for a while becuase it broke down one morning and I just bought a new one, But I'm thinking of sorting out the problems with it now since I need an extra phone.
The main problem with it is that it locks up in boot.
If I do a normal boot it locks at the HTC logo and the "friendly dinging sound"
I was thinking of reflashing it, but since it never boots up the only flashing I can think of is through the SD card.
So i put the file "RAPHIMG.nbh" in the root folder of my SD card and booted it up using the volume button pressed to looad the loader, it swaps over to a loading screen then it just freezes here aswell.
Any ideas on to WHY this happens and HOW to solve the issue.
issue solved, I managed to get the bootloader to get to waiting mode and cet a connection to it from my windows computer and run a default ROM onto it, now I can start modding it
i couldnt help but notice this thread, im am facing the same problem, except that my phone has never been flashed before, its fully stock. how did you manage to load a ROM beyond the "Loading..." screen. i have done exactly what several guides, including the ones i found in the forum, have told me to. Neither the SD card flash, nor the Activesync flash are working.. help please?
flashing
try tsis :http://forum.xda-developers.com/showthread.php?t=540290
I've tryed this on Touch Pro and it works , but do only the driver replace on windows......don't do task 29 or else .Instal the driver bring the phone into a bootloader and flash a stock rom...
hope it will do...
Hey guys, I just downloaded and are CURRENTLY in the process of installing cyanogenmod 6.1 on my incredible. I backed everything up beforehand, however, my screen just keeps reloading the basic blue cyanogenmod screen with the logo on it. Is this part of the installation process, or do I have something to worry about here?
It won't allow me to turn the phone on/off either. PLEASE HELP!
Hi all,
I really need a help here. I have a G1 rooted with CM rom ver5. it was working fine since 3 months but suddenly now the phone doesnt boots up, it goes to white screen with 3 droid skaters and highlight on Hboot. It is freezed then and nothing can be done. I removed battery and tried booting by home + power ; camera+power etc etc . nothing happens it goes to that screen only. i have amons recovery and also nand backups in sd card. but the system doesnt let me go any where!! Please help......
I've made the s-off, installed clockwork, and got root, and I wanted to install a new rom. I downloaded InsertCoin Sense Android 2.3.4 STABLE 1.2, turned off the phone, installed from zip, and everything went ok.
But when I rebooted the phone it remained stuck on the white screen with the green htc letters!
I tryed to enter the bootloader, but I can't! It always starts the white screen!
Plz help!
EDIT: ok, I've found a way to access the bootloader again, in this post:
http://forum.xda-developers.com/showthread.php?t=1137311
where it says: "My Phone Died and i can't turn it back on!!!"
Hello everyone, today I upgraded to a 'newer' version of phicomm i600 that i found online and on the installing that upgrade (in the recovery) it showed some wierd error and when it completed it went blank screen.. I hear logo and contrast is not completly dark, a bit bright (my display didn't died) and when somebody called me, i answered.. so everything is working except I cant see anything (even the phicomm logo) and I cant even load recovery cause I cant see.. Is there any program to show what is happening on mobile cause I tried UNIFLASH and didnt work and I cant even find any firmware.. so HELP PLEASE!
Hello,
Welcome to XDA.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help?
The experts there may be able to help.
dark112 said:
Hello everyone, today I upgraded to a 'newer' version of phicomm i600 that i found online and on the installing that upgrade (in the recovery) it showed some wierd error and when it completed it went blank screen.. I hear logo and contrast is not completly dark, a bit bright (my display didn't died) and when somebody called me, i answered.. so everything is working except I cant see anything (even the phicomm logo) and I cant even load recovery cause I cant see.. Is there any program to show what is happening on mobile cause I tried UNIFLASH and didnt work and I cant even find any firmware.. so HELP PLEASE!
Click to expand...
Click to collapse
So, if anyone get blank screen, but not completly as mine, you can solve it like this. I noticed that a black contrast gets a little brighter sometimes. So, I entered recovery (using power + volume down) mode and noticed there is first brighter than darker blank, so i figured out that I entered recovery mode. Previously I plugged in phone in laptop and then deleted all my files on phone and sd card and only copy original rom that I have found on official SIngapore Phicomm page. Then I turned phone, entered recovery mode, then on blind, went on any kind of update (cause usually update is 2. and 3. option, internal and external, 1. is reboot now).
So I pressed down to pick that update (i guessed) and power and repeat it 2 more times and all I could see is blank. After some time, I saw a phicomm logo.. And reminder ** don't use any Phicomm update found on any internet page cause it's all wrong**
Later I have red that it have installed wrong kernel. I hope it will be at any help!