[Q] cant access bootloader D2G - Droid 2 Global General

Hi guys, just made this account but i've been here for a while.
My D2G has problems.
My power button is broken and i cant access the bootloader.
My phone is (thank god) rooted and has stock 2.2
I tried to get venusX 3.2 gingerbread but forgot to sbf.
im stuck at the red M logo with the bee and cant sbf (power button im guessing)
I tried to sbf since my battery autoboots when inserted and held the up key to see if i could get into the bootloader.
This is the problem why i cant sbf:
My screen is blank and flashes on and off every 15 seconds and RSD Lite 4.9 doesnt even detect the phone. (PC too)
So to sum this up, basically i cant get into the bootloader fully and cant sbf to stock 2.2
I seriously need help with this.
Oh and i dont think i should ask this in this question since its unrelated and all...
but my D2G's Data does not work for some reason and i can only use it on wifi for the web (no talk/text) Verizon told me that i need to call *228 and press 1 and 2 on separate calls. Needless to say it did nothing. Everytime my phone boots the 3G icon pops up for 2 seconds and then disappears.

Related

[Q] Droid 2 Recovery

Today I tried to install Gingerbread 2.3 to my Milestone 2 (Droid 2) and the attempt was a severe failure. Tried Hard Reset. Unable to do it. ยด
Can anyone say me how to recover from Rom Manager (But unfortunately not able to get my mobile started)
When ever I try to hard reset all I see is fickering of Moto logo just once on the screen and thats it. then the screen remains blank after that.
However, finally pressed the home+camera+volume down+power
and its showing
Bootloader 70.12
Battery OK
OK to Program
Transfer Mode: USB
Have no idea what it means or wat to do. Totally new to rooted phone applications.
Could you plzzz help me out.
Any tips?
I am really frozen. Just a couple of weeks old.
I googled a lot of options. Everything was a failure.
Desperately searching for help!

[Q] MyTouch 3G Slide Not Booting

In December of last year, I had my friend root and install CyanogenMod onto my Mytouch 3G Slide. Everything was working fine until I wanted to update my ROM and tried to boot my phone into recovery mode to make a NANDroid backup. A screen with a picture of a phone and a red exclamation point inside a triangle would appear, and I'd have to pull the battery out to restart the phone.
Then, I tried to access the bootloader by holding the volume down and power buttons. After some loading, it asked me if I wanted to update. Not knowing what it was asking, I said no, and tried to access the actual recovery menu, but the same screen showed up.
I tried again, this time accepting the update. Now, when my phone boots, the stock mytouch splash screen appears and the phone does nothing from there.
At this point, what would be the best solution? Is my phone just bricked, or is there a way to restore it to the stock firmware/recover CyanogenMod?
EDIT: For clarification, I can still access the bootloader, where I have four options: Fastboot, Recovery (See problem above), Clear Storage, and Simlock.
EDIT 2: I left it on the splash screen and discovered that it seems to have just thrown my phone into a stock factory state, running 2.1-update 1. Not sure if it's still rooted.

How to recover my defy updated with official 2.2.2 SEA froyo

Hey guys,
I need some help, this is my first time to post here(noobie). Anyway, I have learned plenty of things here in this forum..now my problem is I updated my defy with the official 2.2.2 froyo (singapore) it was ok at first though had some camera issues it kept shutting down before taking a shot. now was going to do a nandroid backup have it rooted,SetCPU and stuff..My mistake was when I used the clockworkmod for defy it installed then when I was about to go to recovery mode it got stock in a boot loop..I panic and used the hard reset (stupid enough) that i was looking for the menu (which I just read today if froyo:use + & - keys for it) to which I cannot do anything I went to boot load to flash my old firmware ver2.59 SEA18 now at RSD lite it says PASS..but did not restart my defy.. now I cant even get it to recognize even after charging my battery using universal charger. though i still see the white light at the top when I plug it on my PC..
Can anyone help..sorry for my bad posting..THANKS a lot for any help..

[Q] my XOOM is in a constant reboot loop! HELP!!!!

I had my 4G xoom unlocked and rooted, installed Tiamat 2.2 on it (which then killed the 3G) so I decided to flash back to stock, but somehow screwed up the backup, managed to go back to factory 3G image with the HRI66.zip file I found in another thread. It unrooted my phone and relocked it, but now it's in a constant reboot loop, showing the honeycomb images for nearly 45 minutes now. What's my options? My computer wont talk to it, because I can't even get into it to enable USB debugging.... UGH!
sooo..... I let my device run dead.... then powered it up, went into fastboot mode, which took me straight to the unlock screen.... because I didn't lock it when I unrooted it.... All fixed..... except still NO 3G!!!!!

[Q] Help I cannot get into download mode =(

Hey I had numasx running, I then tried installing MIUI, it did not work it booted up to the Samsung screen, I took out the battery manually booted into the cmw by pressing the volume keys and the power button, however the cmw changed colours from what was once red to now blue, i wiped and reflashed MIUI hoping it would work however it does not the samsung screen was on for 20 minutes, I tried bringing the phone back to At &T stock ( my phone is Rogers by the way) however this brick my phone where it constantly goes into a white screen and restarts when usb is connected.. any help, there is no way I can get into download mode.... When the phone is connected to the computer and Odin is on my screen it shows that my phone is constantly connecting and disconnecting ... What should I do? Should I send it into warrenty? and what is the difference between voodo lag fix and the regular blue cwm?... seriously htc phones do not seem to have this issue when flashing roms...
ramzilla136 said:
Hey I had numasx running, I then tried installing MIUI, it did not work it booted up to the Samsung screen, I took out the battery manually booted into the cmw by pressing the volume keys and the power button, however the cmw changed colours from what was once red to now blue, i wiped and reflashed MIUI hoping it would work however it does not the samsung screen was on for 20 minutes, I tried bringing the phone back to At &T stock ( my phone is Rogers by the way) however this brick my phone where it constantly goes into a white screen and restarts when usb is connected.. any help, there is no way I can get into download mode.... When the phone is connected to the computer and Odin is on my screen it shows that my phone is constantly connecting and disconnecting ... What should I do? Should I send it into warrenty? and what is the difference between voodo lag fix and the regular blue cwm?... seriously htc phones do not seem to have this issue when flashing roms...
Click to expand...
Click to collapse
hmm...someone else had this problem a few days ago.
http://forum.xda-developers.com/showthread.php?t=1437548&page=4
start at post #35
It's not a hardware issue though its a complete brick I just want to make sure other infuse owners don't get the same mistake and what steps can be taken to prevent it I am a noob when it comes to flashing especially this being my first samsung android but its the red cwm to the blue
it's not a brick.
brick is when you get nothing. absolutely nothing.
you've some sort of power looping...not brick.

Categories

Resources