Hello,
yesterday i was so happy about the tw ics update for the TF101G that i couldn't wait and updated it with the blob file flashed to mmcblk0p4.
After the first restart the Asus flash process worked and restartet the device again like everytime i flashed my transformer with this method.
But after the restart the screen stayed black and the background light too and nothing happend.
I tried to restartet the device several times after this but nothing happend, the only thing that works now is APX mode that i can see in my device manager but since i have a tf101g that has sbk3 it wont help me.
So it seems my device is bricked forever. Recocery wont work, normal Boot wont work, not even the screen shows whats up but stays black.
I hope someone can help me because its hard to see an so expensive paperweight in front of me.
And i hope my english isnt that bad to understand.
have you tried plugging it into the mains and rebooting?
Have loaded the battery over night but it didnt helped.
Looks like my expensive Paperweight will stay one.
Loaded the Battery since then and tried to reboot and blind recovery in case only the display driver or something wont work but the display stays dark black.
Hi,
I've kinda weird problem with my skyrocket.
When phone boots, just split second of boot screen appears and then total black until boot complete and i have to press unlock button twice to wake device. And after that while using, whenever i start browser or camera app, it goes to black again.
then i decided to flash phone again to ATT original 4.1.2 firmware wia ODIN and found another problem,
In download mode, screen remains totally black, phone detects by Odin but nothing on screen.
then I've tried flashing 2.3.6, ICS and JB original and CM firmwares but no success.
if anybody aware about this issue, please help.
thanks. :good:
this is my first htc and so far i am missing my samsung and motos
the phone is now completely non responsive and is stalled at the HTC boot screen with the text "this build is for development purposes only " i have the verizon htc one m8 ive tried removing the sd and sim holding power holding volume and power nothing makes a difference.
rooted with s off twrp is my custom recovery
started by putting slimrom on for a change of pace i had horrible signal strength and decided to try another rom somewhere in the process of flashing venom one my sd lost its backups the phone had stayed on the same screen for a while but eventually booted to a stable seeming venom rom and had 3g but no 4g service i ended up rebooting the phone today around 11 am and its been in this loop / screen since. i let the battery die down and was able to get to recovery and searched for my back ups but they were gone i ended up rebooting and now am stuck on the same screen as before. even after trying to enter recovery twrp it goes back to htc and not twrp
i tried every combination of buttons the few times and have drained the battery twice and now it just boots to this screen and is non responsive. hope that i can manage to find a way to push something to it or enter recovery and go back to stock using ruu's
anyone with input or advice would be a blessing at this point id be happy to make a donation for any useful help / anything to get me out of this screen even so i can push another rom or ruu to get me to stock
im afraid ive ruined a perfectly awesome phone
update got back to twrp and tried to re flash the venom one rom after full wipe but used their option for "stock" install said 100% and sucessful but upon the reboot is now seems to be stuck in the same screen.
got into the recover after battery died re flashed venom
after about 15 minutes on the htc screen it went to set up ....still very buggy more so than last time the phone was actually working but it is at least from what i can tell working ... going to try to get back to square one somehow
screen wont turn on and acts very buggy only time it stays on is holding power and gives reboot options... i done f ' ed this phone up.
How long are you waiting after I restarts when the install is finished? It will take a long time on that first boot. I have seen them take more than 5 minutes and if you interrupt it it can cause problems.
Samsung Galaxy S5 G900A (AT&T)
Previously on a day off I became very bored, and decided to root my phone. After playing around with everything for a day i did not like it. So i just went into recovery mode and did factory rest on my phone. Now I used supersu and a basic root everything worked perfect after i rooted it. But once I tried to put the stock firmware back on my phone it started acting funny. With showing Unfortunately Context Service has stopped. It was so absurd my phone couldnt function properly. I tried flashing the stock firmware on there in hopes that it would fix my problem, but it only made my phone completely inoperable. I have been trying multiple ways to fix this using odin v3.09 and odin v 3.10.6. Here are some of the files I have tried to get my phone back to stock. (G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5) I have tried downgrades. Odin seems to fail on every single one besides this set up (AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5) (CP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5) (CSC_ATT_G900AATT1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5) Odin loads those three files onto my phone perfectly with in 3 minutes but after they are installed on my phone. When i power it up it gets through the first screen and only shows half of the samsung logo freezes and goes to a black screen with a blue light. I have been working at this problem for a little over a week a couple hours a night and i really can not seem to make any progess. Help would be greatly appreciated.
Still having troubles
Flashes firmware perfectly fine but still can not seem to get past the samsung logo loading super slow and then just cutting out and going to a black screen with a blue stationary light on top left of phone.
Still looking for advice
bump
ksutinen said:
Flashes firmware perfectly fine but still can not seem to get past the samsung logo loading super slow and then just cutting out and going to a black screen with a blue stationary light on top left of phone.
Still looking for advice
bump
Click to expand...
Click to collapse
Boot into recovery mode and do full wipes wipe cache ,wipe del Vick cache,factory reset
I think this will resolve your problem
Regards
Mohamed786
Hello,
It all happened like 2h ago when charging my phone (was at about 96%).
I just tried to open a Snap and my screen glitched, phone turned off itself after few seconds.
I could turn it on again only to see the same glitchy screen after one minute after turning on.
Now when I try to turn on my phone I can see the Poco logo and then a white screen with blue dots in a vertical
line going through the center of the screen.
I updated MIUI like a week ago, live in EU (MIUI was probably Global I'm not sure, I didn't change anything).
Bootloader is not unlocked, custom recovery is not installed.
USB Debugging is turned on.
Here is imgur with few photos of how it looks now:
https://imgur.com/a/lXsIm4t
Please help.. I've read that I need to give my phone to a service and they need to replace the motherboard.
I really don't want to lose my data.
I never read about that glitch in Poco phones before and I didn't back up my data.
I really need to get my photos of the phone (I really hope USB debugging helps here).
I also have Google Authenticator on this phone.. no idea if it's possible to get the keys back..
Maybe I could try tools from the index thread but I'm really scared I will make things worse, I need help with that.
That's not actually a brick ,it's jus a screen bug/error in MIUI , I had this white screen but only when I installed MIUI after a custom room ,but it solved very easy by turning phone off/on , but what you have is different ,I suggest you to enter recovery by pressing power button+volume up and factory reset the phone ,but first try entering safe mode by rebooting the phone and when the Poco logo appears, press volume down until safe logo appears, if your phone boots in safe mode you can recover your stuff , if not try factory resting to get the phone back.
try flashing the stock rom again using miflashtool.
2D1fferent said:
Hello,
It all happened like 2h ago when charging my phone (was at about 96%).
I just tried to open a Snap and my screen glitched, phone turned off itself after few seconds.
I could turn it on again only to see the same glitchy screen after one minute after turning on.
Now when I try to turn on my phone I can see the Poco logo and then a white screen with blue dots in a vertical
line going through the center of the screen.
I updated MIUI like a week ago, live in EU (MIUI was probably Global I'm not sure, I didn't change anything).
Bootloader is not unlocked, custom recovery is not installed.
USB Debugging is turned on.
Here is imgur with few photos of how it looks now:
https://imgur.com/a/lXsIm4t
Please help.. I've read that I need to give my phone to a service and they need to replace the motherboard.
I really don't want to lose my data.
I never read about that glitch in Poco phones before and I didn't back up my data.
I really need to get my photos of the phone (I really hope USB debugging helps here).
I also have Google Authenticator on this phone.. no idea if it's possible to get the keys back..
Maybe I could try tools from the index thread but I'm really scared I will make things worse, I need help with that.
Click to expand...
Click to collapse
I had this situation too 2 days ago after installing Magisk 24.3 , CusRom DF latest, Firmware 12.5.7. What i did was hit the power button for a sec immediately,and my device was back to normal untill now.
Antonio7489 said:
That's not actually a brick ,it's jus a screen bug/error in MIUI , I had this white screen but only when I installed MIUI after a custom room ,but it solved very easy by turning phone off/on , but what you have is different ,I suggest you to enter recovery by pressing power button+volume up and factory reset the phone ,but first try entering safe mode by rebooting the phone and when the Poco logo appears, press volume down until safe logo appears, if your phone boots in safe mode you can recover your stuff , if not try factory resting to get the phone back.
Click to expand...
Click to collapse
How is it now after awhile?
groovybanana21 said:
How is it now after awhile?
Click to expand...
Click to collapse
I dont use MIUI anymore but i user it for 3 month after that bug and nothing happened ,no ghost touch ,just normal MIUI(with the garbage optimization ) .I dont know how it is with MIUI 13. You should expect anything from MIUI in this phone ,for 200$ that is sold globaly.
Antonio7489 said:
I dont use MIUI anymore but i user it for 3 month after that bug and nothing happened ,no ghost touch ,just normal MIUI(with the garbage optimization ) .I dont know how it is with MIUI 13. You should expect anything from MIUI in this phone ,for 200$ that is sold globaly.
Click to expand...
Click to collapse
I see. I use this device since october last year, i never face any bug except that glitch screen even for a second,that gave me mini heart attack, lol..
So yes i flash stock MIUI13 again and stay on stock till now.
Just happend to my phone everything is stock ... Rebooting gives the same white screen with blue vertical dots / also wiped the data but it still gives the same result
Bumaye961 said:
Just happend to my phone everything is stock ... Rebooting gives the same white screen with blue vertical dots / also wiped the data but it still gives the same result
Click to expand...
Click to collapse
HELP
Bumaye961 said:
HELP
Click to expand...
Click to collapse
You should flash MIUI again with Mi Flash Tool , if it still happens you should flash a custom rom,if you get the same result go to a repair center.
just happend this today to me aswell, same problem with white screen and blue dots in the middle, i had it working for a bit like 3 times after restarting and restarting it for hours, it works for some time and randomly goes blank, safemode doesn't work the problem persists in recovery mode too but it works for the most time, i've never had a custom rom everything is stock and im on miui 13.0.1, the phone does not respond to charging it when off and you have to hold the power button for a long time to turn it on
I recommend to flash stock rom through fastboot mode.
Bambo. said:
just happend this today to me aswell, same problem with white screen and blue dots in the middle, i had it working for a bit like 3 times after restarting and restarting it for hours, it works for some time and randomly goes blank, fastboot doesn't work the problem persists in recovery mode too but it works for the most time, i've never had a custom rom everything is stock and im on miui 13.0.1, the phone does not respond to charging it when off and you have to hold the power button for a long time to turn it on
Click to expand...
Click to collapse
That's indicates your mainboard is broken. claim your warranty for mainboard replacement or new phone replacement(in some region)
i got it working again after messing with plugging the charger in and out while powering it on, it booted and i reinstalled the latest update again from the settings and its been working for 6 hours now, no problem so far.
its a softbrick, in the message above i said that fastboot did not work and i was wrong, but you need to have the bootloader unlocked if you want to try the stock rom flash method
Bambo. said:
i got it working again after messing with plugging the charger in and out while powering it on, it booted and i reinstalled the latest update again from the settings and its been working for 6 hours now, no problem so far.
its a softbrick, in the message above i said that fastboot did not work and i was wrong, but you need to have the bootloader unlocked if you want to try the stock rom flash method
Click to expand...
Click to collapse
I don't think its a softbrick you should get it inspected at any Xiaomi Repair Center.
Same has happened with my POCO X3 PRO. However, after few restarts the phone is now not re-starting after long press boot button. Help.
Atul10 said:
Same has happened with my POCO X3 PRO. However, after few restarts the phone is now not re-starting after long press boot button. Help.
Click to expand...
Click to collapse
try charging it overnight and retry even if it does not respond to charging, i did that too when mine stopped powering on although it only charged around 41%
Antonio7489 said:
I don't think its a softbrick you should get it inspected at any Xiaomi Repair Center.
Click to expand...
Click to collapse
i know it might not be a softbrick but the charger case worked for me it might be a coincidence too because it is random most of the time it boots up randomly after restarting several times, when it does it can work for as little as some minutes or a couple of hours, to me it seemed like the rom got corrupted or something, im not an expert.
my poco x3 pro wont turn on and after the poco logo it gives white screen with blue vertical dots and miflashtool wont work because i didnt download the file on my phone beforehand and my warranty is over what should i do
abdalla 22564 said:
my poco x3 pro wont turn on and after the poco logo it gives white screen with blue vertical dots and miflashtool wont work because i didnt download the file on my phone beforehand and my warranty is over what should i do
Click to expand...
Click to collapse
No real answer till now ðŸ«