Related
Hey guys, merry Christmas! I cant decide what rom abd kernel will i use, by knowing the majority users it can help me alot, please put your comments, thanks!
Sent from my Google Nexus S using Tapatalk
bmt25 said:
Hey guys, merry Christmas! I cant decide what rom abd kernel will i use, by knowing the majority users it can help me alot, please put your comments, thanks!
Sent from my Google Nexus S using Tapatalk
Click to expand...
Click to collapse
Please move the thread. Sorryyyyy
Sent from my Google Nexus S using Tapatalk
If you want more information about which kernel + ROM combination to use please read this thread:
http://forum.xda-developers.com/showthread.php?t=1358473
Ultimate ICS v2 and Glados Kernel 2.3, so far no problems, really smooth.
ROM: http://forum.xda-developers.com/showthread.php?t=1363765
Kernel: http://forum.xda-developers.com/showthread.php?t=1336529
Most likely I'll switch for Cyanogen Mod, once Beta/RC are available, though.
I am on Stock ICS4.0.3 + kernel 3.0.13 = better battery and bluetooth
ICY+S 3.1 with Galdos 2.3
Sent from my Full Android on Crespo using XDA App
NexusBeam v4.1.0 + GLaDOS V2.3
Stock ICS 4.0.3 + Kernel 3.0.13
I am on AOSP+ V1.2|ICS 4.0.3 and GlaDOS 2.4
Stock ICS with GLados 2.3 Stable as hell
PixelRom 1.01 (stock ICS) + kernel 3.1.6 by eugene373
Stable and smooth.
I am on CM9 Alfa 18 with Matr1x v13.
With GladDOS 2.4 I had a lot of reboots, 2.5 seems stable.
But with Matr1x v13 there is less battery drain.
I'm still on :
ROM : CyberGR-Mod ver4.
Kernel : Franco (8 Dec) Kernel
Really smooth & super stable Gingerbread rom with a super kernel of Franco's.
I would wait until ICS is stable enough & many customization on the UI been made.
Cm9 alpha 18 on stock kernel.. Its the best IMO. I've tried GLaDOS too but it had frequent reboots or sod.
Nexus bream will be a close second to cm9
Sent from my Nexus S using Tapatalk
technogravy said:
Cm9 alpha 18 on stock kernel.. Its the best IMO. I've tried GLaDOS too but it had frequent reboots
Click to expand...
Click to collapse
take GlaDOS 2.5 and no longer you will have reboots.
Stock 4.0.3 + GLaDOS 2.5
Nexus MV 1.12.09
default kernel Franco 2.6.35.14
waiting fo ICS to last a full days work before using it as daily driver....
the_one_ said:
Stock 4.0.3 + GLaDOS 2.5
Click to expand...
Click to collapse
+1
Fast, stable and a very good battery life.
Stock GB 2.3.7 with stock kernel.
I've tried every ICS ROM around here, including the OTA, but none of them had a good battery life. At least not like GB. I'm getting 2 - 2.5 days with moderate use.
ramon.dexter said:
PixelRom 1.01 (stock ICS) + kernel 3.1.6 by eugene373
Stable and smooth.
Click to expand...
Click to collapse
+1... and the best battery performance...
The Official OTA ICS?
Or something else?
Could you give an advice?
i am using aosp v3 and its runing smooth as silk
at the moment you can safely go with stockrom. Add a custom kernel if you like.
Everyone has his own preference on custom-roms and will tell you "this is the best", but so far they don't differ that much from stock. It's more about the name and the occasional theme mod. Kernel is more important.
If you do a manual update, go for a full install including full wipe. Gave me better performance than the incremental update from gb.
I am running on Codename Android (Previously called AOSP+)
Codename Android
with Eugene's Speedy-6 Kernel --
Speedy-6 Kernel
twtww said:
The Official OTA ICS?
Or something else?
Could you give an advice?
Click to expand...
Click to collapse
Kangy-V8 + Matr1x 15.0 CFS
老乡见老乡, 两眼泪汪汪
..
KANGY8 .. best ICS ROM i've used so far
Stock 4.0.3
3.0.8 kernel (with superuser 3.0.7 and busybox 1.19.3)
LOL haha~let's follow the rule-in English
Sent from my Nexus S using XDA App
CodeName Android with M4tr1x kernel, lulzactive governor. It is super super slick!
kangy8 here with icup speedy kernel v6
http://forum.xda-developers.com/showthread.php?t=1432408
Why doesn't the new update from Asus uses the 3.0 kernal? aren't there a lot of enhancements with it?
Sent from my Transformer TF101 using Tapatalk
bobloadmire said:
Why doesn't the new update from Asus uses the 3.0 kernal? aren't there a lot of enhancements with it?
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
The 2.6.xx kernels vs the 3.0 kernel........
2.6.39.4 is maybe one ver behind 3.0 i think
Besides all the features can be back ported to the kernel that we are using
Also we still have to wait for kernel source before we can expect anything exciting
Sent from my Transformer TF101 using xda premium
its also kernel not kernal.
There aren't a lot of differences between 2.6.39 and 3.0. In fact, Linus made the Linux kernel jump to version 3 because it has 20 years now, not because it's a major release.
So I don't think it really needed as 2.6.39 works well so far
The main reason due to Asus uses the old 2.6.39 (yes old, we are at 3.3 now, with a looot of changes) is because nVidia doesn't provide updated sources for Tegra's devices
That's all
Inviato dal mio GT-I9100 usando Tapatalk
I remember reading on Wikipedia Android History that ICS is based on Kernel v3.0 as default, seems not the case with this one then?
It's not another complaint about ICS, I don't care if it is Kernel v1.0, I just need something that works
mcbyte_it said:
I remember reading on Wikipedia Android History that ICS is based on Kernel v3.0 as default, seems not the case with this one then?
It's not another complaint about ICS, I don't care if it is Kernel v1.0, I just need something that works
Click to expand...
Click to collapse
Yeah, original ICS from Google is based on newest kernel 3.0, but as i said nVidia just added ICS support to his old 2.6.39 kernel
has nvidia mentione anything about upgrading to 3.0? it seems tegra 3 does use it.
Sent from my Transformer TF101 using Tapatalk
Just noticed spark is using 3.1 kernel. Interesting
Sent from my WX435 using Tapatalk
Check this nice thread! Works perfectly now on ICS with latest Pyroice and the Adreno patch i've recently added to the ROM threads:
http://forum.xda-developers.com/showthread.php?t=1515900
Reversed post.... Just in case !
[KERNEL][GPL][3.0.y]Advanced Sense Kernel - r2
The Beast Mode kernel was buit by sbryan12144 from Team Blackout. It based on Team Virtuous HTC msm7x30 3.0 kernel. A month later, p2pjack forked blackout kernel repo and started writing his own kernel, then he named it "Beast Mode MOD kernel". Unfortunately, 2 weeks later, p2pjack had bought a Nexus 4 and moved on. So i PMed him to let me take over his work and continue working on it. This is what he said to me:
p2pjack said:
Well everyone its been fun but its time i moved on have a nexus 4 now and the dhd being retired to the bottom draw as a back up phone . When someone else takes over with this kernel i will close this thread .
Thankyou to everyone here and sbryan12144 for his kernel beastmode
thachtunganh will be taking over this thread soon as the mods change it
Click to expand...
Click to collapse
06/02/2013: No more Beast Mode MOD Kernel, now renamed to Advanced Sense Kernel (A.K.A The A.S.K), rebased on DevChun's Kernel with some patches from Beast Mode MOD Kernel.
Click to expand...
Click to collapse
31/03/2013: This is now completely discontinued. From now i'm working on HD-Kernel.
This theard is now closed until i work on another project.
Thank you for using and loving my work!
Working-in-process
WIP:
Implement Sweep2wake. ---- DONE
Improving battery life. ---- With Sense 4.1/4.5 ROMs, the battery is almost good as kernel 2.6.35, it still drains a bit faster, but it's enough for daily using.
Choose a best governor to set as default governor. -- done, use Interactive governor.
Beta Version:
Beta Version:
Beta version will be write as DD/MM/YYYY, there will be no edition names for each beta version.
Beta version will have bugs/issues. Please report bugs/issues that you found WITH a logcat, if you don't report bugs/issues by following those steps, your report will be ignored, because it will be useless...
Beta version will have some experimental features, so it MAYBE dangerous for your device, so use it at your own risk, BACKUP YOUR PHONE BEFORE TEST THEM!
If you don't follow guide/instruction for Beta version and then you break your device ; you won't get help from me, i will laugh at your face!
Thank you for read all information above! Have a great day!
1/03/2013: A new beta version. This is r2a beta version, if it's stable, so it will be stable version.
Changelog is on Github. There are some improvements for performance and power (battery life). And r3 will be released until s2w code for synaptic_3k touchscreen driver is available. r3 will have many changes, like new undervolting code, GPU overclocking code, ....
So, here is the link to r2a beta version, please BACKUP YOUR PHONE before test it: http://www.mediafire.com/?5s00rucrxhrmolh
Trick:
How to check which touch screen driver you have?:
Download 'Terminal Emulator' App from Google Play, then type this in:
Code:
cat /sys/android_touch/vendor
Then you will see some kind of 'code' like this:
Code:
ATMEL_blahblah_blahblahblah :p
, that means you have Atmel touch screen driver.
Sweep2wake feature:
Authored by show-p1984. If you don't know how it is, please spend a little time to watch this Video:
To active/control it, you should use ViperDHD ROM, there is a option in Venom Tweaks (Setting Application -> Scroll down a bit -> Venom Tweaks), you can control it (Only can 'Enable' or 'Disable' for now, 'Enable (no backlight buttons)' option hasn't worked yet, DO NOT TRY IT!).
If you use another Sense ROMs (Sabsa Prime/Bliss, Blackout, Virtuous Infinity...), download "Sweep2Wake-Widget" app from Google Play Store. It's a Widget, so use it as a Widget, download it, then add the Widget to your home screen, tap it. When it turn to green color, s2w is ready/
Get the 'last_kmsg' and 'kmsg' files:
To get those file. Just use a File Manager app which can access to "/" partion. Then access to "/proc", you will find them in there.
Sense Kernel
Good to have a sense Kernel thread again!
p2pjack said:
WIP : Kernel patched to 3.0.56
Click to expand...
Click to collapse
Where is the link to 3.0.56?
Sent from my HTC Desire HD using Tapatalk 2
soleil10 said:
Where is the link to 3.0.56?
Sent from my HTC Desire HD using Tapatalk 2
Click to expand...
Click to collapse
Not ready yet
Sent from my Inspire™ 4G With Beats Audio using xda premium
Thanks dev...
Thanks, index thread updated.
I used the latest kernel here and doesnt work well for music quality on Sabsa Prime Rom so I reverted to kernel .51
Sent from my HTC Inspire 4G using xda app-developers app
Any chance you could make one for Beastmode v1.5? Are there any significant differences between Beastmode v1.5 and v1.5?
Last, if I remember correctly, you made some tweaks to the Beastmode kernel, are this present in your v1.5, or is your v1.5 a stock v1.5 updated to 3.0.55?
Sorry for all the questions, and thanks.
Sent from my HTC Desire HD using xda premium
Roberto_Lim said:
Any chance you could make one for Beastmode v1.5? Are there any significant differences between Beastmode v1.5 and v1.5?
Last, if I remember correctly, you made some tweaks to the Beastmode kernel, are this present in your v1.5, or is your v1.5 a stock v1.5 updated to 3.0.55?
Sorry for all the questions, and thanks.
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
Yes the tweaks are there will send you a pm later
BeastMode 1.5 MOD V0.1
SayAliFlyeer said:
I used the latest kernel here and doesnt work well for music quality on Sabsa Prime Rom so I reverted to kernel .51
Sent from my HTC Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
Sorry to hear that but I'm very happy that there is more choices of kernel now just wish the other devs would come to xda and update there work here to
BeastMode 1.5 MOD V0.1
p2pjack said:
Yes the tweaks are there will send you a pm later
BeastMode 1.5 MOD V0.1
Click to expand...
Click to collapse
The was a great kernel. Have observe v1.6 for almost a week now. Flashing you're v1.5 after I post this.
Sent from my HTC Desire HD using xda premium
p2pjack said:
Sorry to hear that but I'm very happy that there is more choices of kernel now just wish the other devs would come to xda and update there work here to
BeastMode 1.5 MOD V0.1
Click to expand...
Click to collapse
Hi p2pjack! News from new kernel? So excited for this news!! All we must say THANKS 1000 times!
What is the difference between the v0.1 and v0.2? And can this be flashed on Blackout 3.2?
Thanks.
Sent from my Inspire 4G using xda app-developers app
rustin921 said:
What is the difference between the v0.1 and v0.2? And can this be flashed on Blackout 3.2?
Thanks.
Sent from my Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
The only change is the kernel patched to 3.0.56 change log for that can be found here http://www.kernel.org/pub/linux/kernel/v3.0/ChangeLog-3.0.56
should work on blackout 3.2 always make a backup first
Will observe v0.1 for a day, than flash v0.2. Thanks again for all the hard work.
Sent from my HTC Desire HD using xda premium
which one to download v1 or v2 im on viperdhd thanks
v0.2 is working or better for me in terms of battery life. Am running Blackout v3.2.
Sent from my HTC Desire HD using xda premium