Database Info

Kernel

Anyone working on any kernels for this phone? As I understand the kernel from the mytouch3g is pretty much the same.
Sent from my HTC Liberty using XDA App

No promises but it did work on a legend.
Here

dumfuq said:
No promises but it did work on a legend.
Here
Click to expand...
Click to collapse
Confirmed WORKING on Aria!
Quadrant 1065
Linpack 8.921

Script said:
Confirmed WORKING on Aria!
Quadrant 1065
Linpack 8.921
Click to expand...
Click to collapse
Nevermind I see the link now
Sent from my Liberty using XDA App

I can also confirm this works on my aria running a011. Best linpack so far is 9.7 with quadrant of 1060
Edit: just hit 1103 quadrant
I have not run into any issues. On setcpu my min is set to 224 with my max being 768
Sent from my cm6 Liberty.

Which version did you guys install via recovery?

Aside from Linpack numbers showing a performance increase, are there any noticeable differences with day to day usage? 600 to 768 doesn't seem like a substantial jump...
Sent from my Liberty using XDA App

Should I do a whipe before install
Sent from my Liberty using XDA App

ioft said:
Aside from Linpack numbers showing a performance increase, are there any noticeable differences with day to day usage? 600 to 768 doesn't seem like a substantial jump...
That's more than a 25 percent increase, it's pretty substantial if you ask me.
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Sent from my Liberty using XDA App

Did not wipe, did a nadroid and flashed Kernel V1 through clockwork recovery. Used setcpu to 768/245 on demand.
Quadrant high 1071. Seems a little bit snapper

Ok thanks
Sent from my Liberty using XDA App

Seems a bit faster loading apps and stuff. Its solved my lockup issue too.. Could be coincidence but I haven't had one since flashing this kernal.
I did a nandroid backup then wiped caches only. Flashed version in first post in the link.
Sent from my cm6 Liberty.

bfinch said:
Seems a bit faster loading apps and stuff. Its solved my lockup issue too.. Could be coincidence but I haven't had one since flashing this kernal.
I did a nandroid backup then wiped caches only. Flashed version in first post in the link.
Sent from my cm6 Liberty.
Click to expand...
Click to collapse
I also have not had any lockup issues. I tested this last night. I had wifi on before flashing this kernel and had 3 "lockup/freezes" within 2 hours. After flashing I have had none. Even when i set the max to only 600, I still have had 0 lockups.

Will this work with Rooted / Liberated Aria ROM ?

ycode90 said:
Will this work with Rooted / Liberated Aria ROM ?
Click to expand...
Click to collapse
I used it on CM6 A011, but I dont see why it shouldnt work with Liberated. Just make sure to do a nandroid first

About to try v2 and see how it runs
Sent from my Liberty using XDA App

So,, how exactly setcpu works... I have the app.. but there is no like a save or apply button... I go to the app... select detect ,, then slide to 768... but there is no save button... I have the checkbox for set at boot... but at restart it goes back 600...
thanks

I think this is for froyo only. I could be wrong though
Sent from my cm6 Liberty.

I you're right actually
Btw... tested v2 and it kept setting itself at like 400mhz. So I would stick with the first release at the top of the thread
Sent from my Liberty using XDA App

flashed over liberated aria linpak and quadrant marginally higher.

Most stable ROM.

i want a fast and stable rom for Nexus S ?
Hi to all i have available space after i install all my apps 657MB but my Nexus S i slow on the official rom 2.3.2 but it's slow and it reboot a lot and i want to change to a faster rom and stable and when i make test with Quadrant it give me 890 only

amjad_2020 said:
Hi to all i have available space after i install all my apps 657MB but my Nexus S i slow on the official rom 2.3.2 but it's slow and it reboot a lot and i want to change to a faster rom and stable and when i make test with Quadrant it give me 890 only
Click to expand...
Click to collapse
There is no other room more stable than stock.
I have used 1.2 kernels and different roms and the only place that you can see a difference is on Quadrant test, in real life use I don't notice a damn difference from stock speed.

My friend have Bionix 1.2 on his NS and his phone is more faster then my NS

MoDaCo gets the best battery life, the bionix 1.3 beta isn't too stable and to be honest 1.2 isn't my cup of tea, cyanogenmod is in nightlies still but its very stable and its what both my wife and I run, plus there are a few others I haven't tried. For kernels I definitely recommend netarchy 1.2.1 as it has the amazing voodoo sound mod plus its the most stable I've used. Just my two cents.
Sent from my Nexus S using XDA App

netarchy 1.2.1 + stock rom works pretty good IMO

CM7 Nightlies are surprsing stable and Cyan Fast.

Thanks to all for the reply
Sent from my Nexus S using XDA App

hansmrtn said:
CM7 Nightlies are surprsing stable and Cyan Fast.
Click to expand...
Click to collapse
this..........

kenvan19 said:
MoDaCo gets the best battery life
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
better than stock?

IMO stock has the best battery life

hansmrtn said:
CM7 Nightlies are surprsing stable and Cyan Fast.
Click to expand...
Click to collapse
i just try this rom but there is no market

amjad_2020 said:
i just try this rom but there is no market
Click to expand...
Click to collapse
You have to flash the gapps (Google apps) on top of cm7
Sent from my Nexus S using Tapatalk

amjad_2020 said:
i just try this rom but there is no market
Click to expand...
Click to collapse
What zephiK said
here
http://goo-inside.me/gapps/gapps-gb-20110120-signed.zip

Thank you all for the help

Using Bionix 1.3 Beta and also Netarchy 1.2.2
Battery life is better than stock. Unless clearing battery statsstats in cwm make such a massive difference.
Sent from my Nexus S using XDA App

I would recommend bionix 1.2 or the 1.3 beta release. I was on 1.2 and its fantastic...really fast and stable. Updated to 1.3 beta with no problems.
Ive tried cyanogen and modacco...both good also but i prefer bionix for now. They all seem well stable and fast tho.
Sent from my Nexus S using XDA App

i have try the bionix 1.3 beta and when i set my cpu to 1300 it lag my NS sand i have try now CM7 Nightlies but it have problem with sueruser

tommyz2kool said:
netarchy 1.2.1 + stock rom works pretty good IMO
Click to expand...
Click to collapse
any issues run into netarchy? Ive used a few kernals with backlight and app errors.

Hello all. What's the best and most stable ROM for the Nexus S at the moment? Or should I wait a while?

benrees21 said:
Hello all. What's the best and most stable ROM for the Nexus S at the moment? Or should I wait a while?
Click to expand...
Click to collapse
They are all very stable and each possess desirable qualities. I would suggest trying them until you find the one that suits you the best.

Fastest rom?

hey guys right now im on serendipity 6.2 with hardcore kernel and its pretty fast but i was wondering what is the fastest rom in terms of ui smoothness out there for the captivate?

Firefly 2.5

+1 firefly
Sent from my SGH-I897 using Tapatalk

I like both phoenix and serendipity, both js7 roms. Works nice with suckerpunch overvlocked
Sent from my SAMSUNG-SGH-I897 using XDA App

firefly 2.5 or paragon rc 6
Sent from my SAMSUNG-SGH-I897 using XDA App

hmm , any of you guys tried DRAGON rom ?
KP5 base is much smoother then Js7 link is in my sig .

Chinese or Europeans??? Which is better???

xdahgary said:
Chinese or Europeans??? Which is better???
Click to expand...
Click to collapse
No no no... you should have put "Chinese or Europeans??? Which is faster???"

AdamNimrod said:
No no no... you should have put "Chinese or Europeans??? Which is faster???"
Click to expand...
Click to collapse
I take around the same time for both! lol!

Just flashed to serendipity 6.2 and have lockups. Pick something else
Sent from my SAMSUNG-SGH-I897 using XDA App

firefly 2.5 with suckerpunch kernal

Totally jf6 stock launcher

mcord11758 said:
Totally jf6 stock launcher
Click to expand...
Click to collapse
totally this

FF 2.6.
Suckerpunch Voodoo #9
Lagfix/Fugu enabled.

xThe Enforcer said:
FF 2.6.
Suckerpunch Voodoo #9
Lagfix/Fugu enabled.
Click to expand...
Click to collapse
+1
Phone will be smooth as butter

Hmmm...serendipity and firefly are probably the only 2 roms I haven't tested...but among the rest, I find continuum 3.5 to be totally awesome, followed by cognition 4.1. All with sp 57/58, plus voodoo lagfix.
Sent from my GT-I9000 using XDA App

psycho2097 said:
Hmmm...serendipity and firefly are probably the only 2 roms I haven't tested...but among the rest, I find continuum 3.5 to be totally awesome, followed by cognition 4.1. All with sp 57/58, plus voodoo lagfix.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
how have you managed not to test 2 of the best roms out there...saving the best for last?
continuum uses suckerpunch and posts some pretty out there quadrant #'s. I haven't used suckerpunch with firefly or serendipity but i suspect they could push it up over 2000 as well. Can't put to much stock in quadrant scores alone i have had plenty of roms with where i got 1700-1900 quadrant with oc but actual user interface displayed was less smooth/quick than ones with 1200-1300 quads.

bamachevrolet said:
+1
Phone will be smooth as butter
Click to expand...
Click to collapse
Thanks...
If you do the following when you first flash it helps too:
Wipre Dalvick Cache.
Wipe Battery Stats.
Wipe Cache Partition.
------
Launcher Pro with the right settings can also work wonders.

I love how noone mentioned CM7, the ONLY ROM with decent JIT right now. Also a huge follower of DRAGON or Andromeda. But seriously, I'm a fan of JF6 with the stock launcher. And are we really talking about benchmarks? Quadrant? Who cares?! Benchmarks aren't worth crap, ESPECIALLY Quadrant.

Firefly all the way (2.6)!!!

safest overclock on GB 2.3.5

whats the safest overclock i can do to my charge, most ive done is 1.2ghz can i go 1.3 with no problems?>

-javier- said:
whats the safest overclock i can do to my charge, most ive done is 1.2ghz can i go 1.3 with no problems?>
Click to expand...
Click to collapse
I'm going to assume right off the bat you're on an EE4 froyo rom? the safest is 1.4ghz however not many peoples phones (myself included when I was on froyo) will be stable, there were random reboots and lockups galore... I was stable at 1.2ghz but as I said everyone's phones are different, but to answer your question yes you can go up to 1.4

anoninja118 said:
I'm going to assume right off the bat you're on an EE4 froyo rom? the safest is 1.4ghz however not many peoples phones (myself included when I was on froyo) will be stable, there were random reboots and lockups galore... I was stable at 1.2ghz but as I said everyone's phones are different, but to answer your question yes you can go up to 1.4
Click to expand...
Click to collapse
sorry i am on 2.3.5 at 1.2ghz i got 1620 in quadrant.

-javier- said:
sorry i am on 2.3.5 at 1.2ghz i got 1620 in quadrant.
Click to expand...
Click to collapse
how are you overclocking on GB?? we have no kernel source so this is not possible afaik just lagfix/ext4

anoninja118 said:
how are you overclocking on GB?? we have no kernel source so this is not possible afaik just lagfix/ext4
Click to expand...
Click to collapse
ill post pics. hold on

i just dowloaded this app call tegrak overclock and it just asked me for superuser permission and i was able to overclock it to 1.2ghz.
i have it set to 100 - 1200 and its stable so thats why i was asking if it was safe to do 1.3ghz.

-javier- said:
i just dowloaded this app call tegrak overclock and it just asked me for superuser permission and i was able to overclock it to 1.2ghz.
i have it set to 100 - 1200 and its stable so thats why i was asking if it was safe to do 1.3ghz.
Click to expand...
Click to collapse
That is setcpu not "Tegrak overclock.... And like he said.. you can't
https://market.android.com/details?id=com.tegrak.overclock&hl=en

Madelynn28 said:
That is setcpu not "Tegrak overclock.... And like he said.. you can't
https://market.android.com/details?id=com.tegrak.overclock&hl=en
Click to expand...
Click to collapse
but i have installed on my charge tegrak.overclock and i am using setcpu, or am i suppose to use one?

i have installed it on my charge
ill post a video soon.

You can overclock with that, but personally, why would you use an app to load a module to overclock? You're forcing the system to do something it doesn't want to, which could easily lead to problems.

imnuts said:
You can overclock with that, but personally, why would you use an app to load a module to overclock? You're forcing the system to do something it doesn't want to, which could easily lead to problems.
Click to expand...
Click to collapse
i been running it like this for 2 weeks and my phones is very stable, also ever since i went with gb it has not auto rebooted like before, all my apps run fast and stable
everything works and i been leaving it on 100-1200, i guess i am lucky.
http://youtu.be/t89VdzvkkhA

-javier- said:
i been running it like this for 2 weeks and my phones is very stable, also ever since i went with gb it has not auto rebooted like before, all my apps run fast and stable
everything works and i been leaving it on 100-1200, i guess i am lucky.
http://youtu.be/t89VdzvkkhA
Click to expand...
Click to collapse
deleted
SENT FROM THE DOG POUND

-javier- said:
i been running it like this for 2 weeks and my phones is very stable, also ever since i went with gb it has not auto rebooted like before, all my apps run fast and stable
everything works and i been leaving it on 100-1200, i guess i am lucky.
http://youtu.be/t89VdzvkkhA
Click to expand...
Click to collapse
Same here stock 2.3.5 clocked at 1.2ghz and its flying
Sent from my SCH-I510

Good to see that tegrak works with the charge now and the people that want overclocking can have it. Always good to have the option to do something.

kennydied23 said:
Good to see that tegrak works with the charge now and the people that want overclocking can have it. Always good to have the option to do something.
Click to expand...
Click to collapse
Im rocking this (2713 on quadrant )
SENT FROM THE DOG POUND

cujo6801 said:
Im rocking this (2713 on quadrant )
SENT FROM THE DOG POUND
Click to expand...
Click to collapse
wow nice whats your clock?

cujo6801 said:
Im rocking this (2713 on quadrant )
SENT FROM THE DOG POUND
Click to expand...
Click to collapse
Yep. Just got ~2800 @1.3.
Sent from my Droid Charge running Infinity Beta

Guys I just downloaded tegrak and it says not supported I an on humble 4.22 should I get the ultimate version
Sent from my HUMBLE by Danalo1979 using xda premium

BlackHoleSlam said:
Guys I just downloaded tegrak and it says not supported I an on humble 4.22 should I get the ultimate version
Sent from my HUMBLE by Danalo1979 using xda premium
Click to expand...
Click to collapse
you need to change the model in the build.prop file.
it needs to say SCH-I510 not humble by Danalo1979 for the app to know what phone you are on.

mrtruckincowboy said:
you need to change the model in the build.prop file.
it needs to say SCH-I510 not humble by Danalo1979 for the app to know what phone you are on.
Click to expand...
Click to collapse
Thanks
Sent from my SCH-I510 using xda premium

[Q] A couple of questions about kernels

I'm on infused 2.2.3 and i currently have Entropy's daily kernel.
I have a few questions about changing it
1) i already know i can just flash over it but, i want a bit faster one, and i wanna try to do that oc stuff... a few things i dont understand from http://forum.xda-developers.com/showthread.php?t=1212485 is that it says only works on Samsung roms and not AOSP roms... firstly would i be ok being on infused? and also what does AOSP even mean?
2) I know it's a stupid question but what is a GB rom and what is the difference between it and other ones?
3)what is voodoo lagfix, voodoo sound and insecure boot?
I think that is all for now
Thanks for any help

First- yes you can flash that kernel with infused.
2nd- GB is gingerbread, its the lastest realses of android system (or soon will be for our infuse)
3rd- voodoo lagfix and sound are a tweek that helps your phone look ,run smoother, quicker, and sound better without a custom kernel but still works with everything.
Big dog Infuse I997 GB KJ4

bignate78 said:
First- yes you can flash that kernel with infused.
2nd- GB is gingerbread, its the lastest realses of android system (or soon will be for our infuse)
3rd- voodoo lagfix and sound are a tweek that helps your phone look ,run smoother, quicker, and sound better without a custom kernel but still works with everything.
Big dog Infuse I997 GB KJ4
Click to expand...
Click to collapse
Ok thanks for that... now which one should i download? Which zip do i download?

joeym11 said:
Ok thanks for that... now which one should i download? Which zip do i download?
Click to expand...
Click to collapse
in the thread you posted, you can pick any of them......Cores A and B just have different clock speeds added.
1.1 of course being the latest, but some have said they prefer 1.0. just flash it with SGS kernel flasher or CWM and you will be good. after doing so, go and get Voltage controller(free) or one of the paid apps(set cpu,Pimp My Cpu) and you will have the option to OC(Over Clock) and UV ( Under volt) that is all really.
no harm no foul, you should not mess anything up. try them out and see which one you like better. i personally liked 1.1 with the Infused Rom.

the2rrell said:
in the thread you posted, you can pick any of them......
1.1 of course being the latest, but some have said they prefer 1.0. just flash it with SGS kernel flasher or CWM and you will be good. after doing so, go and get Voltage controller(free) or one of the paid apps(set cpu,Pimp My Cpu) and you will have the option to OC(Over Clock) and UV ( Under volt) that is all really.
no harm no foul, you should not mess anything up. try them out and see which one you like better. i personally liked 1.1 with the Infused Rom.
Click to expand...
Click to collapse
But it says there's 2 builds to choose from... and there are 4 different downloads

joeym11 said:
But it says there's 2 builds to choose from... and there are 4 different downloads
Click to expand...
Click to collapse
Again
Four DLs
1.1
1.0
core a
core b
STAY away from the different cores, since your just begining with the kernel stuff. EITHER one of the first 2 will be ok for you bruh.

the2rrell said:
Again
Four DLs
1.1
1.0
core a
core b
STAY away from the different cores, since your just begining with the kernel stuff. EITHER one of the first 2 will be ok for you bruh.
Click to expand...
Click to collapse
Alright i think i just bricked it... I went with 1.0 and now it goes from the samsung creen to just a black screen with the 4 bottom buttons lit up, and finally just started up... what happened to the boot animation?
Oh and what should i set my OC to? Like what is a good speed or whatever?

joeym11 said:
Alright i think i just bricked it... I went with 1.0 and now it goes from the samsung creen to just a black screen with the 4 bottom buttons lit up, and finally just started up... what happened to the boot animation?
Oh and what should i set my OC to? Like what is a good speed or whatever?
Click to expand...
Click to collapse
when i was using it i had it stable at 1.6 on xinteractive.
may drain more battery, but thats what undervolting is for.
i dont recall anything about the boot animations.....just reboot again and see if happens again.

the2rrell said:
when i was using it i had it stable at 1.6 on xinteractive.
may drain more battery, but thats what undervolting is for.
i dont recall anything about the boot animations.....just reboot again and see if happens again.
Click to expand...
Click to collapse
How do i undervolt? and what should i undervolt to?