Related
Hi.
I have a Rogers Infuse 4G and I rooted it as was explained by gtg using the Odin Root Kernel and all is fine. I followed the instructions to create the Voodoo folder / disable-lagfix folder before flashing the root kernel and again... the phone rooted perfectly but...
I am now wanting to install the Infused ROM and I followed the instructions starting with step 1. as I am NOT on a CUSTOM ROM and I deleted the Voodoo folder I created and rebooted the phone but when it started it went through the process of ENABLING Voodoo and the folder did NOT delete.
I tried deleting it again and it rebooted but both Astro AND Root Explorer still shows the folder as there and active and I have tried deleting it from both programs so...
How do I get rid of it to flash the Infused ROM or do I even need to? Since it seems to be active and I cant seem to get rid of it can I just skip to step 7 of the ROM install instructions and flash the ROM itself or do I NEED to get rid of this Voodoo folder and start by flashing the other Infused Kernel before I can flash the ROM?
Sorry for being so longwinded but I dont want to brick the phone. Please advise...
Thanks,
Friendly morning bump... Anyone?
Sent from my GT-I9100 using xda premium
yiannisthegreek said:
Hi.
I have a Rogers Infuse 4G and I rooted it as was explained by gtg using the Odin Root Kernel and all is fine. I followed the instructions to create the Voodoo folder / disable-lagfix folder before flashing the root kernel and again... the phone rooted perfectly but...
I am now wanting to install the Infused ROM and I followed the instructions starting with step 1. as I am NOT on a CUSTOM ROM and I deleted the Voodoo folder I created and rebooted the phone but when it started it went through the process of ENABLING Voodoo and the folder did NOT delete.
I tried deleting it again and it rebooted but both Astro AND Root Explorer still shows the folder as there and active and I have tried deleting it from both programs so...
How do I get rid of it to flash the Infused ROM or do I even need to? Since it seems to be active and I cant seem to get rid of it can I just skip to step 7 of the ROM install instructions and flash the ROM itself or do I NEED to get rid of this Voodoo folder and start by flashing the other Infused Kernel before I can flash the ROM?
Sorry for being so longwinded but I dont want to brick the phone. Please advise...
Thanks,
Click to expand...
Click to collapse
All Voodoo kernels include CWM.
Once you've flashed a Voodoo kernel that includes CWM and it's done the Voodoo conversion, just flash Infused from CWM and do a "Wipe Data/Factory Reset" from CWM.
Entropy512 said:
All Voodoo kernels include CWM.
Once you've flashed a Voodoo kernel that includes CWM and it's done the Voodoo conversion, just flash Infused from CWM and do a "Wipe Data/Factory Reset" from CWM.
Click to expand...
Click to collapse
So you're saying that the kernel I used to root my phone is OK to just flash the Infused ROM from?
Even though I have tried to remove the voodoo folder twice (its still there) it is still enabled and I can do this even though I am still on my stock Rogers ROM and not on any custom ROM which is what the instructions say?
Please advise...
Sent from my GT-I9100 using xda premium
yiannisthegreek said:
So you're saying that the kernel I used to root my phone is OK to just flash the Infused ROM from?
Even though I have tried to remove the voodoo folder twice (its still there) it is still enabled and I can do this even though I am still on my stock Rogers ROM and not on any custom ROM which is what the instructions say?
Please advise...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
You usually only have to disable Voodoo Lagfix when moving to a kernel that is missing Lagfix support - which means "bone stock" on our devices as all other kernels support it.
Check gtg's "optional" stuff at the bottom of the root post - http://forum.xda-developers.com/showthread.php?t=1197248
Entropy512 said:
You usually only have to disable Voodoo Lagfix when moving to a kernel that is missing Lagfix support - which means "bone stock" on our devices as all other kernels support it.
Check gtg's "optional" stuff at the bottom of the root post - http://forum.xda-developers.com/showthread.php?t=1197248
Click to expand...
Click to collapse
Thanks again for the help and info but I guess my real question now is... Since I have already tried removing the voodoo lagfix, have I messed anything up that would affect my ability to just go ahead and flash the ROM from CWM?
You said that the Rogers root kernel also has the proper CWM in it right?
If yo0u can advise on these for me then I will give it a go when I get home from work tonight.
Thanks again,
yiannisthegreek said:
Thanks again for the help and info but I guess my real question now is... Since I have already tried removing the voodoo lagfix, have I messed anything up that would affect my ability to just go ahead and flash the ROM from CWM?
You said that the Rogers root kernel also has the proper CWM in it right?
If yo0u can advise on these for me then I will give it a go when I get home from work tonight.
Thanks again,
Click to expand...
Click to collapse
Probably not... Worst case you might need to go into Mounts and Storage and format /system prior to flashing.
And make sure to do Wipe Data/Factory Reset when you flash
Entropy512 said:
Probably not... Worst case you might need to go into Mounts and Storage and format /system prior to flashing.
And make sure to do Wipe Data/Factory Reset when you flash
Click to expand...
Click to collapse
But how will I know IF I may have to go into Mounts and Storage and format /system before I flash? Is there a way to tell if I have to do this?
Someone advised me by PM to go into Root Explorer and press r/w and then delete the folder and it should go away so I can start from step 1 of the instructions but I dont know if that will work either.
yiannisthegreek said:
But how will I know IF I may have to go into Mounts and Storage and format /system before I flash? Is there a way to tell if I have to do this?
Someone advised me by PM to go into Root Explorer and press r/w and then delete the folder and it should go away so I can start from step 1 of the instructions but I dont know if that will work either.
Click to expand...
Click to collapse
Hmm...
Use ADB or Android Terminal Emulator while your phone is running and type
Code:
mount
If it shows ext4 for /system and /data, lagfix is enabled and you should be good to flash.
Entropy512 said:
Hmm...
Use ADB or Android Terminal Emulator while your phone is running and type
Code:
mount
If it shows ext4 for /system and /data, lagfix is enabled and you should be good to flash.
Click to expand...
Click to collapse
OK... I will try the terminal emulator when I get home then as I am not familiar with adb... I did this on my SgsII and typed mount but it gave me a whole page of stuff so I hope its easier on my infuse...
Sent from my GT-I9100 using xda premium
the voodoo folder is created by the voodoo kernel on bootup.
it is the "disable-lagfix" folder or text file (it doesn't matter which as long as it exists) within the /Voodoo folder that disables the lagfix. as long as you have a voodoo kernel you will have a voodoo folder regardless of weather voodoo is enabled or disabled.
also since infused has voodoo it supports both rfs and ext4 and it doesn't matter if voodoo is currently enabled or disabled. the Rom will install just fine. it just takes a while the first time if voodoo installs from rfs. the only exception is if there are errors in the lag fix logs but none of the infuse kernels have ever given me that problem.
the idea of disabling lagfix with the root kernel on rogers is just incase you return to the stock kernel which can't boot the phone on ext4.
Dani897 said:
the voodoo folder is created by the voodoo kernel on bootup.
it is the "disable-lagfix" folder or text file (it doesn't matter which as long as it exists) within the /Voodoo folder that disables the lagfix. as long as you have a voodoo kernel you will have a voodoo folder regardless of weather voodoo is enabled or disabled.
also since infused has voodoo it supports both rfs and ext4 and it doesn't matter if voodoo is currently enabled or disabled. the Rom will install just fine. it just takes a while the first time if voodoo installs from rfs. the only exception is if there are errors in the lag fix logs but none of the infuse kernels have ever given me that problem.
the idea of disabling lagfix with the root kernel on rogers is just incase you return to the stock kernel which can't boot the phone on ext4.
Click to expand...
Click to collapse
OK so I went ahead and tried to install the rom starting from step 7 and I am STUCK in a boot loop or am bricked. All I see is the Samsung logo and nothing else.
How do I get back now and please remember that this is a ROGERS phone so the standard ultimate unbrick wont work as its meant for at&t...
Please help...
EDIT - I CAN get into RED voodoo recovery and am assuming that I should be able to get into download mode as well if I have to..
EDIT 2 - OK so I think I know what I did wrong and it just dawned on me now. First of all I was stupid and did not make a backup of stock DUH!!!
Now what I see I did here is I rooted with the Rogers root kernel which is correct but then I tried to install the Infuse v2 rom over THAT kernel which now I see is listed as ODIN Rogers root Infuse v1 kernel (or something like that) so does that mean I flashed the wrong Tom over the wrong kernel??? If so... can I unbrick it?
Sent from my GT-I9100 using xda premium
WOW!!! Holy SH!T!!! OK so I was able to unbrick it THANK GOD as I found the proper files to do an Odin flash back to stock Rogers firmware.
This flash gave me ROOT but I am now missing the RED CWM recovery so...
Can anyone now tell me where I need to go and what I need to so to PROPERLY install the Infuse v2 rom???
Please and thank you...
All I want is to run a custom rom!!! Why can't this phone be as simple as my old SGS I9000M or my current SGSII I9100. (International version)?
Any advice will be greatly appreciated!!!
Sent from my GT-I9100 using xda premium
I think just go through the steps you did before, but don't mess with the Voodoo folder at all.
1) Flash the CWM/Voodoo/Root kernel
2) Reboot, let it convert partitions (Voodoo Lagfix)
3) Once done, shut down, go into CWM, flash Infused and wipe data
Entropy512 said:
I think just go through the steps you did before, but don't mess with the Voodoo folder at all.
1) Flash the CWM/Voodoo/Root kernel
2) Reboot, let it convert partitions (Voodoo Lagfix)
3) Once done, shut down, go into CWM, flash Infused and wipe data
Click to expand...
Click to collapse
Arrrgh!!! I just don't get it!!! I did everything by the book this time and it STILL BRICKED ON ME!!!
As I said... last night I cleaned it with Odin package and all I had was root... No VOODOO at all so I simply went to the Infused ROM 2.2.3 THREAD and followed all the proper instructions for CWM installation staring right from #1 and for crying out loud IT STILL BRICKED!!! What am I doing wrong???
Do I need to have an external sd card inserted or my sim card for this to work because I don't at the moment...
Well back to Odin I go to unbrick again... I just don't get it!!! :-(
Sent from my GT-I9100 using xda premium
yiannisthegreek said:
Arrrgh!!! I just don't get it!!! I did everything by the book this time and it STILL BRICKED ON ME!!!
As I said... last night I cleaned it with Odin package and all I had was root... No VOODOO at all so I simply went to the Infused ROM 2.2.3 THREAD and followed all the proper instructions for CWM installation staring right from #1 and for crying out loud IT STILL BRICKED!!! What am I doing wrong???
Do I need to have an external sd card inserted or my sim card for this to work because I don't at the moment...
Well back to Odin I go to unbrick again... I just don't get it!!! :-(
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
did yoy wipe data/factory reset before you flashed? you should try that.
also the first boot takes a long time. you should hear robot voices (seriously) as It converts. but if that causes you trouble then let the root kernel do the voodoo conversion. don't delete anything and don't remove the root kernel. just use it to flash.
if you still have trouble then start over. create a sub folder in the Voodoo folder (the V is capitalized) called "disable-lagfix" all lowercase no quotations. and don't enable lagfix till after the new Rom is installed.
Hi.
I think I did all this... when I started the second time I was only rooted with no voodoo.
I followed the instructions and flashed the infuse v2 CWM kernel with sgs kernel flasher and rebooted the device like the instructions said to do and voodoo enabled itself. (What I did notice is that even after I flashed this kernel and voodoo enabled itself that when I went to about phone it still showed the same code for the stock kernel (it diddnt say it was different) if that matters).
I then downloaded the ROM zip Infuse 2.2.3 full and placed it on the root of my internal sd card and then powered off the phone, went to RED CWM recovery (voodoo recovery) and flashed the ROM. Then I immediately wiped the data and rebooted as per the instructions and all it does is show me the Rogers splash screen for 2 seconds and then sits on the word Samsung forever.
How long does it take to boot past the word Samsung? Could I just not be letting it boot fully and assuming that its bricked?
Sent from my GT-I9100 using xda premium
you shouldn't be having a problem unless the Rom was a bad download. try downloading again.
also, if it fails again put the disable-lagfix file/folder in the Voodoo folder as a last resort and don't enable the lag fix till after the first boot with infused is successful.
Dani897 said:
you shouldn't be having a problem unless the Rom was a bad download. try downloading again.
also, if it fails again put the disable-lagfix file/folder in the Voodoo folder as a last resort and don't enable the lag fix till after the first boot with infused is successful.
Click to expand...
Click to collapse
You know that I'm coming from stock gingerbread on a Rogers Infuse device... right? I'm not sure that matters at this point but I thought I'd mention it just in case.
Again... does it matter that I'm flashing the ROM without an external sd card inserted and with no sim card in it? Just want to have all my bases covered...
Sent from my GT-I9100 using xda premium
yiannisthegreek said:
You know that I'm coming from stock gingerbread on a Rogers Infuse device... right? I'm not sure that matters at this point but I thought I'd mention it just in case.
Again... does it matter that I'm flashing the ROM without an external sd card inserted and with no sim card in it? Just want to have all my bases covered...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Shouldn't, but might... I've never removed my SD or SIM.
Just received my Infuse 4G and I think I rooted it, but I can't bring up the regular recovery menu (install zip from SD card, etc.). I have Superuser and ROM Manager, but when I reboot into recovery, the standard menu does not show up but another one with totally different choices. By the way, when I installed CWM it didn't have the Infuse as a choice for devices. Did I skip a step in the rooting process?
Choose i9000 in Clockwork.
Sent from my SAMSUNG-SGH-I997 using XDA App
That did not work.
Sent from my SAMSUNG-SGH-I997 using xda premium
It makes an update zip.... You take it and put it in the sd root after you rename it update.zip. Then you have to have a modded 3e recovery file that you replace the original with in system/bin/. Then go into recovery, reinstall packages. Bam, clockwork.
Sent from my SAMSUNG-SGH-I997 using XDA App
GAPY427 said:
Just received my Infuse 4G and I think I rooted it, but I can't bring up the regular recovery menu (install zip from SD card, etc.). I have Superuser and ROM Manager, but when I reboot into recovery, the standard menu does not show up but another one with totally different choices. By the way, when I installed CWM it didn't have the Infuse as a choice for devices. Did I skip a step in the rooting process?
Click to expand...
Click to collapse
Are you stock rooted? or custom ROM?
If you are rooted use SGS kernal flasher and flash a custom kernal that will give you recovery easiest way i think
brorex said:
If you are rooted use SGS kernal flasher and flash a custom kernal that will give you recovery easiest way i think
Click to expand...
Click to collapse
Or Odin/Heimdall a custom kernel in download mode - don't even need root for that.
And don't use ROM Manager - it just causes problems on our devices since it insists on using a crippled recovery that isn't compatible with Voodoo Lagfix.
TDuran said:
Are you stock rooted? or custom ROM?
Click to expand...
Click to collapse
It's stock rooted.
Do I have to install CWM if its already embedded in the kernel...the problem I have is when I tried I don't get the att captivate option just the i-9000...which is odd since I'm not running anything based on that.
Sent from my SAMSUNG-SGH-I897 using xda premium
If CWM is already in the kernel, you shouldn't have to install it. As far as seeing i9000, where are you seeing that?
Are you using ROM Manager?
I was using rom manager....but everytime I wanted to do anything it wanted to flash the recovery..and the device option window would pop up and only provide i9000
Sent from my SAMSUNG-SGH-I897 using xda premium
1. If the CWM is integrated with Kernel, you dont need to install it.
2. DO NOT use ROM Manager with such kernels. If you need to flash anything, place zip on your sdcard, reboot in recovery (use extended power menu, or adb or 3 button combo) and install zip from CWM recovery.
Thanks I stopped using rom manager awhile ago....my preferred install method is either Odin or in recovery. I was just curious why CWM gave me that option
SGH-I897
2.3.5
I897UCKJ3
SAMURAI KERNEL
ILLUMINANCE 1.1
TEGRAK UOC 1.3
I ran into a very similiar problem. Now I stick with just copying over a zip and using recovery for pretty much everything - especially ROM updates!
I want to put CWM on my SGS4G. I already replaced the "update.zip" file and put the "recovery" file in the right place on the SD card and I have ROM manager dl'd and installed. My only question is when I hit the "Flash CWM" button in ROM manager, it asks which phone i'm using and it doesn't list the SGS4G. So which one do I choose....It lists....Google Nexus S, Google Nexus 4G, Samsung Epic4G and Samsung Galaxy S i9000. Which do I choose?
Also, i have already upgraded to the stock Gingerbread 2.3.6, does this make a difference? Can I still get CWM on my phone? Or is there a different way I have to install it?
Thanks for any help!!
First thing to do is delete rom manager. It does not work for this phone. Get rid of it. Second use Odin to flash a modded kernel. It comes with cwm. Look for one in the dev section. Make sure you use a gb kernel.
Sent from my SGH-T989 using xda premium
Paulx777 said:
I want to put CWM on my SGS4G. I already replaced the "update.zip" file and put the "recovery" file in the right place on the SD card and I have ROM manager dl'd and installed. My only question is when I hit the "Flash CWM" button in ROM manager, it asks which phone i'm using and it doesn't list the SGS4G. So which one do I choose....It lists....Google Nexus S, Google Nexus 4G, Samsung Epic4G and Samsung Galaxy S i9000. Which do I choose?
Also, i have already upgraded to the stock Gingerbread 2.3.6, does this make a difference? Can I still get CWM on my phone? Or is there a different way I have to install it?
Thanks for any help!!
Click to expand...
Click to collapse
- The method you are attempting to use to update to CWM works on Froyo only; not on Gingerbread (GB).
- ROM Manager does not work on this phone & will cause you problems. You should uninstall it.
- If you're wanting CWM on your GB ROM, you have a couple of options:
-- Install a modified kernel that has it (like drhonk's KJ1 kernel)
-- Install bhundven's Subtly Modified Stock with CWM5 + Voodoo Lagfix
Best of luck to you.
Can anyone tell me what I'm doing wrong:
a) ATT Infuse Phone is rooted using SuperOneClick;
b) downloaded ES File Explorer and ROM Manager;
c) ZEUS Build 3 zip file is in root folder of my sd card;
d) backed up everything with Titanium Backup;
e) placed the 3e recovery no sig check recovery file into my system/bin folder;
When I try to reboot into CWM recovery, it goes into the "blue" 3e Android recovery. When I install packages, I get an error message.
Then when trying to flash ROM through ROM Manager, I cause a Samsung bootloop, and have needed to flash back to Odin to unbrick my phone.
Is my problem related to the fact I'm flashing from stock froyo? Do I need to change the kernel (not sure what this means) prior to flashing the Rom? Why can't I get the CWM bootloader instead of the "stock" blue Android screen?
thanks in advance - sorry, am a newbie and this isn't my thing.
scott
Flash gtgs community kernal then boot in to red cwm, wipe all and flash
Sent from my SAMSUNG-SGH-I997 using xda premium
Shaffer678 said:
Flash gtgs community kernal then boot in to red cwm, wipe all and flash
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Is it normal when I flash GTG's community kernel, that my phone starts talking to me and saying something about 10 minutes?? It just scared the #$# out of me, and has been sitting in the Samsung boot screen for a few minutes.
Holy #@$$, that voice is scary. It looks like the kernel worked...
Freaked me out the first time too lol
Sent from my SAMSUNG-SGH-I997 using xda premium
Use Root explorer
DroidNooby said:
Can anyone tell me what I'm doing wrong:
a) ATT Infuse Phone is rooted using SuperOneClick;
b) downloaded ES File Explorer and ROM Manager;
c) ZEUS Build 3 zip file is in root folder of my sd card;
d) backed up everything with Titanium Backup;
e) placed the 3e recovery no sig check recovery file into my system/bin folder;
When I try to reboot into CWM recovery, it goes into the "blue" 3e Android recovery. When I install packages, I get an error message.
Then when trying to flash ROM through ROM Manager, I cause a Samsung bootloop, and have needed to flash back to Odin to unbrick my phone.
Is my problem related to the fact I'm flashing from stock froyo? Do I need to change the kernel (not sure what this means) prior to flashing the Rom? Why can't I get the CWM bootloader instead of the "stock" blue Android screen?
thanks in advance - sorry, am a newbie and this isn't my thing.
scott
Click to expand...
Click to collapse
Use Root Explorer to help Solve That problem
The voice is voodoo lagfix activating...its completely normal
Sent from my SAMSUNG-SGH-I997 using xda premium
DroidNooby said:
Can anyone tell me what I'm doing wrong:
a) ATT Infuse Phone is rooted using SuperOneClick;
b) downloaded ES File Explorer and ROM Manager;
c) ZEUS Build 3 zip file is in root folder of my sd card;
d) backed up everything with Titanium Backup;
e) placed the 3e recovery no sig check recovery file into my system/bin folder;
When I try to reboot into CWM recovery, it goes into the "blue" 3e Android recovery. When I install packages, I get an error message.
Then when trying to flash ROM through ROM Manager, I cause a Samsung bootloop, and have needed to flash back to Odin to unbrick my phone.
Is my problem related to the fact I'm flashing from stock froyo? Do I need to change the kernel (not sure what this means) prior to flashing the Rom? Why can't I get the CWM bootloader instead of the "stock" blue Android screen?
thanks in advance - sorry, am a newbie and this isn't my thing.
scott
Click to expand...
Click to collapse
You need to install the community kernel, then download sgs kernel from the market and install. I had this same problem and this was the answer! http://forum.xda-developers.com/showthread.php?t=1220090
Follow these instructions and make sure you download this http://www.multiupload.com/1E3AWIQYAA if your coming FROM froyo.
Move the file to your internal sd card, then use sgs kernel to install. The sgs was a little tricky, but you'll see the file in there to flash.
Hey thanks for asking DroidNooby! I was searching the forums for "bootloaders" because the Zeus thread said "MUST BE ON GB BOOTLOADERS." All I found was a bunch of people sounding as confused as I was asking "how do i install?"
I was beginning to think it was an inside joke of the Infuse forums lol.
Odin one of the gb leaks (that'll give you boot loaders). Then odin a gb kernel with a recovery. Uncheck reboot before flashing kernel. Then boot up into recovery and flash.
Sent from my SAMSUNG-SGH-I997 using xda premium