Database Info

PROBLEM flashing Hard-SPL on Vario III

I am trying to Unlock T-Mobile MDA Vario III
R 1.27.15.32
D 22.51.88.13H
G 1.82.00.00
and on the first step installing Hard-SPL, it goes into Bootloader mode and shows
KAIS130
SPL-1.93.0000
CPLD-8
on the 3 color screen, after a while it shows "USB" i replug da cable, and the progress bar appear, BUT IT STAYS AT 0% FOREvER.
I try this one - JumpSPL1.56, it goes into bootloader, shows
KAIS130
SPL-1.56.Jump
CPLD-8
on the screen........... and again the same situation, 0% FOREVER!!!
tryed this one too, - JumpSPL1.93, in this case shows
KAIS130
SPL-1.93.Jump
CPLD-8
BUT Stucks - USB doesn't appear on the screen!!!
I also try this "solution" (while my MDA shows "0%" on the screnn);
4. After some time you get a communication error Message. DON'T RESET YOUR MOBILE DEVICE. DON'T TOUCH IT.
5. Press Exit to quit KaiserUnlocker.exe on your Desktop machine.
6. Unplug and replug the USB cable.
7. Start the KaiserUnlocker.exe again and wait a little bit.
but doesn't work - when i replug the cable PC discover it like "Unknown Device" (VEN_000&PID000)
PLEEEEEEEEEESSEEEE HELP me. How can i flash this Olipof SPL!!!

the same thing happens to me with one tynt II brand 3 ita!!
who helps us?
thanks!

Hi,
Can you try these steps (from this thread):
kyphur said:
1a. download the attached files
1b. pull out the battery and reinsert it (this step *is* important)
1c. connect your PC to phone with a USB cable
2. REMOVE SIM and SD CARDS !!
3. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe
4. after a few seconds "USB" appears on the phone display
5. unplug and replug the usb cable
6. deselect "Allow USB connections" in Activesync connection settings
7. now flash hardSPL (run KaiserCustomRUU.exe from flash-hardSPL.zip on your PC)
Click to expand...
Click to collapse
Hard SPL 3.56 download here: http://forum.xda-developers.com/attachment.php?attachmentid=92774&d=1213511155
Let me know what stage you get to and what errors you get. If the RUU gives an error you can check here first: RUU Errors
Ta
Dave

DaveShaw said:
Hi,
Can you try these steps (from this thread):
Hard SPL 3.56 download here: http://forum.xda-developers.com/attachment.php?attachmentid=92774&d=1213511155
Let me know what stage you get to and what errors you get. If the RUU gives an error you can check here first: RUU Errors
Ta
Dave
Click to expand...
Click to collapse
perfect!!!!
tnxxxxxxxxxxxxxxx

thanx
thanx,
you r legend bro
much appreciate
where do u learn all these stuff ?

hauntedgrave said:
thanx,
you r legend bro
much appreciate
where do u learn all these stuff ?
Click to expand...
Click to collapse
Spending too much time on here reading everything
Dave

Need help to Hard reset SE Aspen?

Anyone knows how to reset the Aspen manually? Cant seem to get it started.

What happened to your phone?
Download Sony Update Utility and try to reflash the firmware.

I can't get SEUS to recognize my Aspen. Windows asked for the "qualcomm cdma technologies msm" driver and I found it here on xda. Then it got recognized by windows as some sort of Diagnostic port. Vistas mobile device center recognizes it but not SEUS.

Just to make sure:
0.) USB cable disconnected from phone (!!), SEUS started and ready to connect.
1.) Power off the Aspen
2.) Remove and re-insert battery
3.) Press and hold the green call key on the Aspen while connecting the USB cable to the Aspen
Did you follow these steps?

u.b.o.o.t said:
Just to make sure:
0.) USB cable disconnected from phone (!!), SEUS started and ready to connect.
1.) Power off the Aspen
2.) Remove and re-insert battery
3.) Press and hold the green call key on the Aspen while connecting the USB cable to the Aspen
Did you follow these steps?
Click to expand...
Click to collapse
You mean the same steps proposed by SEUS?

Yes, exactly
(Sorry for the late reply)
Meanwhile, a new firmware is available: R4A.

I just had my M1i Aspen for a day before needing to send it back to store.
After installing/initiating WM6.5 the phone refused to start, it just looped the SE logo and died. buzzed and showing the SE logo on and on. Only way to stopp it was to remove the battery.
Have heard about a W9xx that also just looped the SE logo.
Edit: Forgot to mention that I tried to flash/repair the Aspen with SEUS did two reported successful flashing but the Aspen still just looped the SE-logo.

me to have aspen but with different issue
after i press power, it loads startup screen and widows logo after that, i got message "waiting for sdcard"
tried to flash with updater tool but windows didn't reconize it and ask for msm driver
please anyone have the driver, send it to give a try
thanks

thx...
thx a lot for the solution and i just reflash it ...all back to origin .

eselle said:
Anyone knows how to reset the Aspen manually? Cant seem to get it started.
Click to expand...
Click to collapse
try Wotan Server to reset your phone back to stock. works for me

eselle said:
Anyone knows how to reset the Aspen manually? Cant seem to get it started.
Click to expand...
Click to collapse
Have problem with aspen m1i too. can't connect by holding call button

gt 190601 ds

Help i tried rooting my galaxy grand neo plus via odin it passed but my phone stuck on the samsung logo with an exlamation mark i tried flashing the original stock rom it passed but it gets stuck on the samsung logo help

1. phone on in downloading mode
2. connect ur phone in pc ( proper usb driver installed on pc )
3.Run Odin (run as administrator )
4. select AP or PDA choose ur stock firmware wait for a second ....
5. sure ur phone is added message shows
6.make only tik AutoReboot and F.Reset Time ( dont tik another )
7. Click start....wait for message passed
Un plug ur phone and wait for a minute
Ur phone will stuck on boote
Remove ur phone battery wait a second and put it again and press
Powerkey + homebutton +volup
Click factory data reset
Reboot phone all will be done.......AVS

[RECOVERY TWRP 3.0.2 + SuperSU] Vodafone Smart Turbo 7 (VFD 500)

So here it is after weeks of trying to root my VFD 500 I've decided to port TWRP to make it possible.
I have ONLY tried this on my own Vodafone Smart Turbo 7, no guarantees of success if you use on a different device. I am NOT a developer and I work 60+ hours a week, therefore I will not be updating this or offering support if your device bricks.
TWRP VERSION: 3.0.2
This might break OTA, so keep an original recovery (provided below).
METHOD
1. Download TWRP_VFD_500.ZIP and extract (You should have recovery.img, SuperSU.zip and MT6735M_Android_scatter.txt and recovery-original.img) Copy the SuperSU.zip to your phones SD card, KEEP the recovery-original.img safe for future use..
2. Turn off phone and run SP Flash Tool (I used V5.1644).
3. On SP Flash Tool click choose for Scatter-Loading file and select the MT6735M_Android_scatter.txt that you received in step 1.
4. In the list of partitions make sure that ONLY recovery is selected and that it says Download Only in the drop down menu above the partition list.
5. On the recovery partition line, where it says location, click and browse to the recovery.img provided in step 1 and click open.
6. Press the big green downward arrow.
7. Connect phone to USB cable and plug into computer. The bottom of the SP Flash Tool window will go yellow / red as it flashes the phone. After a few seconds you will be presented with a green tick signifying the end of the process, your phone screen SHOULD have remained off during the entire flash.
8. Turn phone on by pressing the +vol button and power at the same time, your phone should go into TWRP recovery.
9. In TWRP click install, browse to where you copied SuperSU.zip and select it. Follow instructions on screen to install.
10. Once installed reboot to system.​
Enjoy! This is a one off from me, it worked on my phone. If like me you wish to remove all the bloatware and Google Apps you don't need you'll be able to do this using Apps2SD: All In One Tool [ROOT]..... I won't be writing a tutorial for this.
Best of luck, Steve.
TWRP VFD 500.zip
SP Flash Tools

Hey This Seems cool what is the likely hood of this bricking/bootlooping your device?

I can confirm that this does work, i have just installed this on a brand new Vodafone Smart Turbo 7 (VFD 500).
Thanks a lot for your time and effort for porting this.

I installed TWRP on a Vodafone Smart Turbo 7 (VFD 500) and it works! Thanks...

Would this work on VFD 502?

Hi WildsideUK.
Trying to follow your procedure for my sister's tcl vfd 500, using the current version of SP Flash Tool, version 5.18, I stop at step 6 with some doubts.
In the SP Flash Tool, in that moment, I can not find any "big green downward arrow" buttons.
The only button with some "green" is the "Download" button which has a green arrow icon.
Using that nothing happens.
Furthermore, by connecting the phone the bottom part of the SP Flash Tool does not change any color.
I do not know if I do something wrong.
[Update]
[past some experiment and several attempts]
Following the instructions of SP Flash Tool I tried to do the same procedure by removing the battery from the phone.
In this way the procedure worked and the program finished the procedure until confirmed with the green tick.
Wonderful.
Thank you

Hello community
Can someone please give me valid links and tutorials for unlock this phone, i´ve been here for more than 6 hours looking on how to do this, but there´s always a software or file missing. I can´t even install the USB drivers, or find a TWRP properly.
What a headache..
Thanks in advance

Hi
Does anybody have the files in the above post, the links is not working anymore.
Thanks

BravestarrZA said:
Hi
Does anybody have the files in the above post, the links is not working anymore.
Thanks
Click to expand...
Click to collapse
Hi, I too am looking for those files. Did you get them?
My best greetings

I found the files at this link and all went fine!
Archivos recovery+root Vodafone Smart Turbo 7
En esta Descarga tenéis a vuestra disposición todos los archivos requeridos para hacer root al teléfono móvil Vodafone Smart Turbo 7, dispositivo conocido también por el nombre de VFD500. Dichos ar…
www.ayudaroot.com

Phone does not turn on after wrong kernel flashing

I've flashed wrong kernel to my g920f. After this event the phone is turning in TWRP and donwload mode on nicely. But I did a wrong thing again While I'm on the TWRP entered wipe/advanced wipe/choosen data/repair or change file system/change file system/and I chose one of them. While the file system is changing I turned it of. Now I cannot enter TWRP. I can charging the phone, and I can enter Download mode. But when I connect the phone to my laptop I get an error like that: "usb device not recognized". I open odin and connect the phone, doing nothing on odin. What can I do right now?

Anyone help??

If you can't enter TWRP, try connecting with original/failsafe cables (I bet you've already done so). If that won't help try a win7 pc, assuming you have win8.1 or win10. Also, try installing Kies too (Samsung mobile drivers are already installed hopefully). I'm no expert tho, neither might work. Lastly, act as if it is hardbricked, find somebody to JTAG it for you (drop me a pm if you do so, I have a bricked Tab8.9 lying around for a year)
[Turkish]
Elinde win7 laptop varsa bi sansini dene, orjinal/kaliteli kablo da cozebilir (ama denemissindir zaten). Kies'ten emin degilim, ise yaradigini sanmam ama zarar gelmez. Tam hardbrick olmamis ama JTAG attirip kurtarabilirsin belki. Bende de benzer durumda bi Samsung Tab8.9 var bir yildir yatiyor oyle (twrp aciliyor ama onun da sdcard girisi yok). JTAG atan bulup da onerirsen makbule gecer bu arada.