Database Info

i9003 no usb in mode download

hello all
after have insert a new rom kpe stock + cfroot kpe i have put in a bad universal cfroot and then nothing after reboot
i think it's bricked or locked only i remark that the batteries doesn't work normaly because the screen one time connected on the adaptator
flash evrey 5 seconds and if i pull the three key (vol- home power) for enter in download mode i can do it but one time in this mode it's not possible to connected odin no com yellow come another solution is to try directly the driver adb samsung but nothing too.
i'm going have to try the usb jig for reset but i don't know what i 'm trying now for debugging or find another solution please help me
if a solution exist but not sure FYI the recovery mode is not fonctionnal.
all solution or idea are welcoming sorry for english language but i'm trying to explain you with my proper term.
jacknew thanks in advance.

did you install Samsung drivers?
If you did not just follow this thread forum.xda-developers.com/showthread.php?p=45871089
---------- Post added at 02:07 AM ---------- Previous post was at 02:04 AM ----------
amsad said:
If you did not just follow this thread forum.xda-developers.com/showthread.php?p=45871089
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=45871089

i9003 no usb in download mde
Hi thank a lot for you help but i already use and install a new driver but same problem after
so this is not the driver because i've already try the same test on the mac system with the equivalent sofware of windows under mac this is heimdall and i've the same problem then this is not the driver i think.
i'm going to purchase a usb jig for reset and i will see what happen after the reset.
thank you very much.

A USB jig, is to go download mode, anyhow u still need to settled the driver issue first.
Sent from my GT-I9003 using Tapatalk

chongns said:
A USB jig, is to go download mode, anyhow u still need to settled the driver issue first.
Sent from my GT-I9003 using Tapatalk
Click to expand...
Click to collapse
hi
how to do that, how i must reinstall usb driver in my phone ?

You have to reinstall drivers on pc, not phone.

U flashed cfroot come from where?
And I think u have boot loop.
If you can go download mode, than u can do flashing stock ROM. Just have to settle your PC driver.
Try uninstall all driver, and shutdown and restart PC (not restart PC), and reinstall again
Or get another PC which never install Samsung driver, install on it and see if Odin can detect your phone.
Or, try different USB port.
Edit: if you flashed other model cfroot, you have no hope.
Sent from my GT-I9003 using Tapatalk

hi all
i think chongns has raison i'm sure i'm flashed with instead of cfroot kpe i've flashed a bagaria 09 gt i9003 pda but normally all sait it's cfroot universal then normally it's not a problem but after reset the phone is briked.
i've already to reinstall usb driver one try on mac one try on windows, sorry severla try.
but i hope always.
FYI
i've alredy swap the usb cable
swap Os mac windows
Reinstall usb driver
try from odin/heimdall usb detection no good too
Strange Thing
battery life seem to be not good
when i connect the usb charge the screnn is blinking every 3, 5 seconds
and the batterie is not in charge when i've connected it to the usb power
cy u soon
thanks for your help
jack

Help!! Boot loop, Usb debugging OFF, Recovery mode only reads internal memory

my phone got stuck in a boot loop while using Srs manager it kinda deleted a system file and the USB debuging iz off da recovery mode only recognises da internal memory not da micro sd i hav no backups i tried using Adb and it couldn't stay open it opens and close in da twinkle of an eye i have downloaded different tools buh i dont even know how to use dem properly , i did a factory reset even wipe cache nd stuff notin i am dying i have been living wit diz problem for da past 2 months i dont hav CWM mod intalled the onli fun thing i can do with the phone is charge it Plz i nid HELP!!! New member

[Q] Jiayu F1 bricked - What do I do?

Hi there,
I somehow hard bricked my Jiayu F1 WCDMA smartphone (MTK6572) by flashing a wrong ROM (event though it was supposed to be good).
Now, I can connect the phone to the PC and it get's recognised (the bell rings), but I can't flash anything (nor format) through SP Flash Tool, which keeps bumping the "Enable DRAM FAILED" annoying error, no matter what ROM I'm trying to feed it.
I really could use some help, or at least getting a working scatter file, preloader, etc, just to rule out a fault on the flashed files' side.
Thanks a lot.

barbas66 said:
Hi there,
I somehow hard bricked my Jiayu F1 WCDMA smartphone (MTK6572) by flashing a wrong ROM (event though it was supposed to be good).
Now, I can connect the phone to the PC and it get's recognised (the bell rings), but I can't flash anything (nor format) through SP Flash Tool, which keeps bumping the "Enable DRAM FAILED" annoying error, no matter what ROM I'm trying to feed it.
I really could use some help, or at least getting a working scatter file, preloader, etc, just to rule out a fault on the flashed files' side.
Thanks a lot.
Click to expand...
Click to collapse
1. Uninstall all vcom,preloader and MTK drivers using USBdeview then manually install vcom drivers (you can see how to manually install MT65xx (MediaTek) USB VCOM drivers on Windows if you need help doing this)
2. Once you have vcom drivers installed, delete the SP flash tool folder then re-extract a fresh copy
3. I believe you should have go the correct backup now so go ahead and flash it using sp flash tool. you can try meta mode (flash without battery while holding volume up button) if you're still getting the error

[Completed] I need help No Twrp, Can't get into Recovery,No Os. Am I bricked?

So i had My T-Mobile GS6 Rooted
this is the **** up
I was going to factory reset my phone & i accidentally deleted my OS. i had tried to use Odin to re install the rom i had but my phone was never getting detected by any computer, i had tried to use adb sideloader to try & install it thru there but it wasn't working& also bought a OTG cable to try & install the rom from there but it wasn't able to detect it . So i thought it was my charging port because i had lost my fast charging capability before i had tried to reset my phone. I had twrp installed but my dumb ass did something that now im not able to get into twrp. Every time i try to power on my phone it loads with a white screen after a couple of minutes it shuts off. I can't get into twrp but can still get into download mode.
Odin Mode
Product Name: SM-G920T
Current Binary: Custom
System Status: Custom
FRP Lock: Off
Secure Download: Enabled
Knox Warranty Void: 1 (0X0301)
RP SWREV: B:2 K:2 S:2
What I Was Running
XtreStoLite-2.0-Odex-Pure-ROM-Final-XXU2BOFJ
XtreStoLite_S6_Odexed_Pure_Aroma_Add-on_Package_XXU2BOFJ_v.2.0
S6_UniKernel_v8-0002-TWRP
BOGG_Alliance_Framework_RLv3_1
I replaced the charging port on it today so let me know what i can do to try to fix my phone I wouldn't mind going back to stock or just let me know if its bricked

Hello Dear ,
U tried all ways & none of them worked , Emmmm did tried to used another laptop or pc ? & if u still by any ways booted to twrp do a full wipe including everything only then connect ur otg & try it it should connect ok , & try to used latest update of twrp ok ..
Thank You ,

thereassaad said:
Hello Dear ,
U tried all ways & none of them worked , Emmmm did tried to used another laptop or pc ? & if u still by any ways booted to twrp do a full wipe including everything only then connect ur otg & try it it should connect ok , & try to used latest update of twrp ok ..
Thank You ,
Click to expand...
Click to collapse
the thing is that i had twrp installed but my phone was not being recognized by any pc, i tried 2 different ones.
i downloaded the usb driver but odin would still not recognize my phone to flash it to stock
so i had tried to use adb sideloader to try & get a rom to have an OS back to be able to boot the phone but that never worked as well
when i was in twrp i saw that in the "mount" section there was an option for the OTG-USB
but that never did anything
I was still in twrp trying to figure out how to use the OTG to install the zip's into my phone when i went into advanced & I hit Fix Permissions.
i accidentally rebooted my phone & from then on i wasn't able to get into twrp, i ordered a usb charging port & waited for it for about 3 days (while waiting for the part i didn't use the phone)
Got the part today & changed the usb port but as soon as i connected the phone to the charger in a wall outlet or the pc's usb port the screen goes white after about 2 minutes it just shuts off
cant go into recovery but can go into Odin mode but even when i connect it to a pc it doesn't get recognize

Weird mate , anyway try to used other usb cable like changing it to many from ur friends etc ok if still not recognised to ur pc then sorry we can't do anything unless u did everything so if ur phone not recognised to any pc then only center service they can do it by installing os by box etc ok

[Completed] M4 SS1060 Bricked / Help Please.

I guys I'm a noobie at this Stuff... But I make my Struggle, even trying it
I have a M4tel model SS1060 from Telcel, the phone was Ok, just one day it freezed , I removed the battery and when I put it back to the phone it get sttucked at M4 logo
So, I found at the web :cyclops: that with SPflashtool I could make it boot up correctly again, loading again the correct ROM or FIRMWARE with it:
I was making this procedure on a laptop with Windows 8.1pro 64bits.
1.- I get the firmware from MTK page I found
2.- I installed the mtk VCOM preloader drivers succesfully
3.- Extracted the RAR file of the Firmware.
4.- Opened Flashtool, I selected the respective scatter.txt file for my device, put the icon on "Donwload Only".
5.- I unpluged the battery, and conect it via USB, the program started to send the file . After a few secconds a error ocurred saying that the PMT was wrong. So i Try it again a few times, even with other version of SPflashtool, and different firmwares for the M4 ss1060 (diferent mobile operators ROMs) without good results.
At this point the phone was in the same condition... I could boot it into recovery normaly, but when triyng to boot it up it keeps stucked at M4's Logo.
I found that this issue was supposed to be fixed setting the program on "Firmware Upgrade" instead of "Download Only". So I make the same process changing it to Firmware Upgrade.....
7.- The progam started succesfully, and loaded the file completly with no errors, after eight minutes the "ok " icon" was shown :fingers-crossed: .
I unplugged the phone from the PC, insert the battery and nothing happened ANYTHING. I think that my mistake was to put "Firmware Upgrade".....
The phone keeps OFF I plug the Charger and it does not turns even the screen to Say "I'm Charging" :crying: I can't even get it into recovery mode, no logo screens. BUT.... When I plug the USB from the PC to the Phone I see that the Device Manager detects the phone with the Vcom Preloader of Mediatek.
So I tried to load the firmware again with SPflashtool on Download mode, the program send the file correctly, and it takes long as ten minutes showing the "OK" icon. But the phone keeps OFF, it makes nothing....
So I wonder If someone knows what to do, I was thinking on install a custom recovery, having on that the problem may be that I damaged the recovery of my phone making it unaviable to boot up. But I'm not shure, and I haven't found information about it.
I just knows that my phone has a MT6572 Chipset, I wonder if some one knows what to do.
Thanks.

bullracing said:
I guys I'm a noobie at this Stuff... But I make my Struggle, even trying it
I have a M4tel model SS1060 from Telcel, the phone was Ok, just one day it freezed , I removed the battery and when I put it back to the phone it get sttucked at M4 logo
So, I found at the web :cyclops: that with SPflashtool I could make it boot up correctly again, loading again the correct ROM or FIRMWARE with it:
I was making this procedure on a laptop with Windows 8.1pro 64bits.
1.- I get the firmware from MTK page I found
2.- I installed the mtk VCOM preloader drivers succesfully
3.- Extracted the RAR file of the Firmware.
4.- Opened Flashtool, I selected the respective scatter.txt file for my device, put the icon on "Donwload Only".
5.- I unpluged the battery, and conect it via USB, the program started to send the file . After a few secconds a error ocurred saying that the PMT was wrong. So i Try it again a few times, even with other version of SPflashtool, and different firmwares for the M4 ss1060 (diferent mobile operators ROMs) without good results.
At this point the phone was in the same condition... I could boot it into recovery normaly, but when triyng to boot it up it keeps stucked at M4's Logo.
I found that this issue was supposed to be fixed setting the program on "Firmware Upgrade" instead of "Download Only". So I make the same process changing it to Firmware Upgrade.....
7.- The progam started succesfully, and loaded the file completly with no errors, after eight minutes the "ok " icon" was shown :fingers-crossed: .
I unplugged the phone from the PC, insert the battery and nothing happened ANYTHING. I think that my mistake was to put "Firmware Upgrade".....
The phone keeps OFF I plug the Charger and it does not turns even the screen to Say "I'm Charging" :crying: I can't even get it into recovery mode, no logo screens. BUT.... When I plug the USB from the PC to the Phone I see that the Device Manager detects the phone with the Vcom Preloader of Mediatek.
So I tried to load the firmware again with SPflashtool on Download mode, the program send the file correctly, and it takes long as ten minutes showing the "OK" icon. But the phone keeps OFF, it makes nothing....
So I wonder If someone knows what to do, I was thinking on install a custom recovery, having on that the problem may be that I damaged the recovery of my phone making it unaviable to boot up. But I'm not shure, and I haven't found information about it.
I just knows that my phone has a MT6572 Chipset, I wonder if some one knows what to do.
Thanks.
Click to expand...
Click to collapse
Greetings,
Thanks for using XDA Assist. Please ask your question here:
Android Q&A
You'll receive expert advice there. Good luck!