Related
Hi everyone,
I tried to root my Samsung Galaxy following the guide from xda developers (http://forum.xda-developers.com/showthread.php?t=1056334).
I forgot to enable the USB debugging mode on the device (Settings -> Applications -> Development -> USB debugging)
I started ODIN, then my device rebooted. I started SuperOneClick and I received a message saying "device not found".
Then I went to check the guide, and I saw that I forgot to enable the USB debugging mode on the device (Settings -> Applications -> Development -> USB debugging).
Can anyone help me to fix this?
I'm from Portugal. If I wrote anything wrong sorry for my mistake and for any inconvenience.
Thank you for any help.
Not sure if you're just having problems with Odin recognizing your phone or not but the basics are to ensure you have the phones drivers installed and enable usb debugging. Afterwards you make sure your phone gets recognized fully from your computer once plugging it in. If so you start Odin AND THEN plug in your phone with the directions for getting to download mode (removing battery and holding volume button etc) and in Odin it should show a connection on a com port tile. Then you load up your files and send them. If anything I am sure you just may have a problem by not being in download mode?
Sent from my SGH-T989 using xda premium
Do you have the latest drivers? Have you killed all KIES apps?
hompsar said:
Not sure if you're just having problems with Odin recognizing your phone or not but the basics are to ensure you have the phones drivers installed and enable usb debugging. Afterwards you make sure your phone gets recognized fully from your computer once plugging it in. If so you start Odin AND THEN plug in your phone with the directions for getting to download mode (removing battery and holding volume button etc) and in Odin it should show a connection on a com port tile. Then you load up your files and send them. If anything I am sure you just may have a problem by not being in download mode?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
The only thing that my device do it's when I press power on it appears the image of samsung galaxy and the yellow triangle above. It doesn't do anything more. it is blocked on that image. I can ear in my computer the sound of some device plugged to the usb port, but don't detect any device. It only makes the sound of some device that was plugged to the usb port.
But I can put my device in download mode. What files I have to send? but I don't know what files I should send to the device. Can you please help me?
What I have to do in odin?
thanks
heretix said:
Do you have the latest drivers? Have you killed all KIES apps?
Click to expand...
Click to collapse
I have the latest drivers from my cell phone operator. I can only have access to Kies on my pc (but now, kies doesn't recognize any device plugged to the pc), my phone don't let me gain access to the menu and to any application.
Get into download mode and go into keis and start a firmware upgrade and initialization. (you will need model number and serial number behind the battery) and go through the process it tells u to. Then you will be back to stock, then try to root from there the proper way.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
utahst8 said:
Get into download mode and go into keis and start a firmware upgrade and initialization. (you will need model number and serial number behind the battery) and go through the process it tells u to. Then you will be back to stock, then try to root from there the proper way.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
I did what you said, I get into download mode, then pressed the volume up key to continue. I started KIES on PC and it doesn't recognize any phone plugged in USB port. I tried to start the firmware upgrade and initialization and then KIES show me the message: "GALAXY SII (GT-I9100) does not support initialization".
Any suggestion o fix this?
Thanks for the help.
mrmister2010 said:
I did what you said, I get into download mode, then pressed the volume up key to continue. I started KIES on PC and it doesn't recognize any phone plugged in USB port. I tried to start the firmware upgrade and initialization and then KIES show me the message: "GALAXY SII (GT-I9100) does not support initialization".
Any suggestion o fix this?
Thanks for the help.
Click to expand...
Click to collapse
What carrier are you going through? Some of the carriers the phones wont do this in keis
utahst8 said:
What carrier are you going through? Some of the carriers the phones wont do this in keis
Click to expand...
Click to collapse
I don't know what you mean with "carrier".
Is there any chance to copy a tar file with ODIN that let me gain access to the cell phone?
beacuse this happened when I use Odin to copy the XWKDD_insecure.tar to the phone.
thnaks for the help.
mrmister2010 said:
The only thing that my device do it's when I press power on it appears the image of samsung galaxy and the yellow triangle above. It doesn't do anything more. it is blocked on that image. I can ear in my computer the sound of some device plugged to the usb port, but don't detect any device. It only makes the sound of some device that was plugged to the usb port.
But I can put my device in download mode. What files I have to send? but I don't know what files I should send to the device. Can you please help me?
What I have to do in odin?
thanks
Click to expand...
Click to collapse
You could find a stock ROM first (depends on where you bought your phone / country, provider) and flash through Odin. Unplug your phone from your PC > task manager > kill all KIES apps > turn on your phone into download mode > open ODIN > connect phone to PC
Then ODIN should show your phone is connected with a yellow box, depending on what ROM you downloaded you put the needed file in the PDA box (file with the name such as I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME.tar.md5), click START and wait until that box goes from yellow to green. Phone should reboot now. If it gets stuck, get into the recovery mode (Vol UP + home + power) and wipe everything.
+1
Sent from my SGH-T989 using xda premium
heretix said:
You could find a stock ROM first (depends on where you bought your phone / country, provider) and flash through Odin. Unplug your phone from your PC > task manager > kill all KIES apps > turn on your phone into download mode > open ODIN > connect phone to PC
Then ODIN should show your phone is connected with a yellow box, depending on what ROM you downloaded you put the needed file in the PDA box (file with the name such as I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME.tar.md5), click START and wait until that box goes from yellow to green. Phone should reboot now. If it gets stuck, get into the recovery mode (Vol UP + home + power) and wipe everything.
Click to expand...
Click to collapse
Thanks a lot. Done and fixed. It's all ok now.
Thank you very much.
No problem mate, as long as it works.
Sent from my GT-I9000 using Tapatalk 2
Forgot to enable usb debugging while flashing, got s2 bricked
heretix said:
You could find a stock ROM first (depends on where you bought your phone / country, provider) and flash through Odin. Unplug your phone from your PC > task manager > kill all KIES apps > turn on your phone into download mode > open ODIN > connect phone to PC
Then ODIN should show your phone is connected with a yellow box, depending on what ROM you downloaded you put the needed file in the PDA box (file with the name such as I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME.tar.md5), click START and wait until that box goes from yellow to green. Phone should reboot now. If it gets stuck, get into the recovery mode (Vol UP + home + power) and wipe everything.
Click to expand...
Click to collapse
Hi,
me too dug deep into the same situation, but when i followed the above step,it didnt get fixed only difference was my yellow triangle got disappeared but still bricked.i did factory reset and cache wipe , no help.
Phone Info:-
S2 - India
stock rom XWKE8 GingerBread
Forgot to enable USB Debugging( since got carried away with my concentration on fixing usb drivers with kies) while doing my first rooting.
i am able to goto download mode and recovery mode as well.
Please do provide me with suggestions..
Regards
Newbie
Galaxy GT-S5660 GIO break
newbie24 said:
Hi,
I have (had ) samsung galaxy gio, i tried to root it then install android 4.2.
1- I forgot to set "Debugging mode" on from the setting.
2- During upgrading from zip file from SD card, battery finished (I know I screwed it up, that day was terrible).
phone does not work. when i turn it on, i have got double boot logos "Galaxy Gio GT-S5660". i mean two startup logo alongside eachother on the top of screen in decreased size. and phone hang on this state. when i try (power + home button) i get normal recovery mode with android sign and alert sign in triangle.
of course any help will be appreciated.
Click to expand...
Click to collapse
I created this thread just because i feel i should hare my knowledge and this is the best way to do it. i am new soo please bare with me
Ever since the 4.3 update for galaxy s4 i9505 came out, i was soo eager to get that on my samsung galaxy s4 shg-i337m which is a canadian variant. I am not the type of guy to run stock roms. i am currently using Foxhound 3.1 diamond dog (very impressive if i say so myself). when i installed it i lost root. i did have to run around to get the method to actually root it once again. i thought i would save peoples time by putting it where it belongs.
Everything below was not created by me. Original post by VINOD YALBURGI from International Business Times (ibtimes.co.uk)
but the download files are easily obtainable (google is a mans best friend)
Downloads Required
CF-Auto-Root for Galaxy S4 I9505
ODIN v3.07
NOTE: Backup important files on the phone's SD card, so if you perform a data wipe or factory reset on your device via recovery (which also formats the SD card), the data may be restored after rooting the device.
How to Root Galaxy S4 LTE GT-I9505 on Android 4.3 XXUEMJ5 Official Firmware via CF-Auto-Root
Root Galaxy S4 LTE I9505 on Android 4.3 XXUEMJ5 Official Firmware [GUIDE]
1. Extract the root file CF-Auto-Root-jflte-jfltexx-gti9505.zip on your computer via 7-zip software to obtain a .tar.md5 file.
2. Also extract Odin 3.07.zip file to obtain Odin3 v3.07.exe.
3. Double-click the exe file to launch Odin.
4. Boot the Galaxy S4 GT-I9505 into Download Mode. To do so, turn off the phone and wait for 6 to 7 seconds until the device completely shuts down.
5. Press and hold Volume Down, Power and Home buttons together until the "Warning!" message appears on screen. Then hit Volume Up button to progress into Download Mode.
6. Connect the phone to computer. When the phone connects successfully, a message saying "Added!" will appear at the bottom left box in Odin.
7. If the "Added!" Message fails to appear, you may try the following troubleshooting steps:
Ensure the correct USB drivers are installed for the phone on computer
Try uninstalling and reinstalling the phone's USB drivers
Connect a different USB cable and check.
Try using another USB port on the computer (preferably the one at the back)
Reboot the phone and PC. Then check if the message appears.
8. Upload the firmware files in Odin as suggested below:
Tap the PDA button in Odin and choose the .tar.md5 file, which was extracted in step 1.
9. Enable Auto Reboot and F. Reset Time options in Odin. Leave all other boxes in Option section unchecked.
10. Verify the previous two steps are done correctly. If there is a mistake, it may brick your device.
11. Click Start in Odin to begin the firmware flashing process on your Galaxy S4. Wait until the PASS message appears in Odin's top left box.
12. When the PASS message appears, the phone will restart automatically. Now, it is safe to disconnect the phone from computer.
NOTE: If a FAIL message appears in step 12, just disconnect the phone from computer and exit Odin. Remove the phone's battery and reinsert it in 3 to 4 seconds, then launch Odin and repeat the entire tutorial from Step 4.
GOOD LUCK ROOTING
Hello everyone, as the title says im looking for a step by step tutorial on how to root my samsung galaxy s4.
Obviously im a newbie here and never rooted any phone so please help me to find a step by step and "almost" safe tutorial for a beginner to do.
Here is my phone model:
Samsung galaxy S4 i9505 4.3 version
Reason for rooting:
-want to remove the bloatware apps on phone
-bored on touchwiz (I guess =))
-want to incorporate music player of sony xperia to my phone (ive seen others that they have this feature even though they are not xperia)
-want a simple but efficient custom rom (any suggestion? Just a simple no more bloatwares)
-last but not the least I wanna try rooting a phone and I really wanna learn how to do it and flashing things on phone, etc =)
Hope anyone can help me. Thanks in advance.
dpdc27 said:
Hello everyone, as the title says im looking for a step by step tutorial on how to root my samsung galaxy s4.
Obviously im a newbie here and never rooted any phone so please help me to find a step by step and "almost" safe tutorial for a beginner to do.
Here is my phone model:
Samsung galaxy S4 i9505 4.3 version
Reason for rooting:
-want to remove the bloatware apps on phone
-bored on touchwiz (I guess =))
-want to incorporate music player of sony xperia to my phone (ive seen others that they have this feature even though they are not xperia)
-want a simple but efficient custom rom (any suggestion? Just a simple no more bloatwares)
-last but not the least I wanna try rooting a phone and I really wanna learn how to do it and flashing things on phone, etc =)
Hope anyone can help me. Thanks in advance.
Click to expand...
Click to collapse
Hi this is how to root your s4.
Pre-requisites
1) Install USB Driver for Samsung Galaxy S4 to transfer files between the Android device and the computer.
2) Enable USB Debugging Mode on phone to connect it with computer and use Android SDK with it. [Press Menu>> Settings>> Applications. From there navigate and click on Development option and check USB Debugging Mode.]
3) As the tutorial might wipe out all data of the phone, create a backup. If the device is having any custom recoveries such as ClockworkMod/TWRP already installed, backup data using the recovery.
4) The Galaxy S4 should have above 80% battery charge.
5) The phone should be factory unlocked and not locked to any particular carrier.
6) The device will lose manufacturer's warranty once it is rooted. However, users can reclaim the warranty back by unrooting the handset later.
7) The CF-Auto-Root files work only on Samsung Galaxy S4 GT-I9500 and GT-I9505. As applying these to any incorrect variant might brick the device, verify the model number of Galaxy S4 by navigating to Settings>> About phone>> Model number and install the root package accordingly.
Steps to root Samsung Galaxy S4 I9500/I9505 on Android 4.3 Jelly Bean
Step-1: Download CF-Auto-Root file for Galaxy S4 to computer (Download link download.chainfire.eu/316/CF-Root/CF-Auto-Root/CF-Auto-Root-jflte-jfltexx-gti9505.zip
Step-2: Extract the downloaded root zip using Winzip, 7zip, winrar or any other extracting tool to get a file with .tar.md5 extension
CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5
Step-3: Download Odin3_v3.07. Extract the Odin zip to get Odin3 v3.07.exe file
Step-4: Switch off Galaxy S4 and wait for five to six seconds for vibration to confirm complete power off
Step-5: Place the phone in Download Mode by pressing and holding Volume Down, Home and Power buttons together until the construction Android robot icon with a warning triangle appears on the phone's screen. Then press the Volume Up button to enter Download Mode
Step-6: Run Odin3 v3.07.exe as Administrator
Step-7: Connect the phone to the computer using USB cable while it is in Download Mode. Wait for some time until Odin detects the device. When the phone is connected successfully, an Added message will appear under Odin message box. Additionally, the ID: COM box in Odin will turn blue with the COM port number indicating successful connection
Note: If the Added message does not appear, then try another USB port, try the one located at the back side of the computer. In case Odin still fails to recognise the device then reinstall USB driver.
Step-8: In Odin, click the PDA button and select CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 or CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 file according to the variants
Step-9: Ensure Auto-Reboot and F.Reset Time checkboxes are selected in Odin
Step-10: Click the Start button in Odin. The installation process should begin now and would take few minutes to complete
Step-11: When the installation process is completed, the phone will restart and soon a PASS message with a green background in the extreme left box at the very top of Odin. Once the home screen appears, unplug the USB cable from the phone to disconnect it from computer
Samsung Galaxy S4 I9500/I9505 running Android 4.3 should now be rooted successfully. You can now install any app that requires root permission. To verify the root method is installed and working properly, install Root Checker app from Google Play Sore.
Press "Thanks" if it helps
jamesclassy said:
Hi this is how to root your s4.
Pre-requisites
1) Install USB Driver for Samsung Galaxy S4 to transfer files between the Android device and the computer.
2) Enable USB Debugging Mode on phone to connect it with computer and use Android SDK with it. [Press Menu>> Settings>> Applications. From there navigate and click on Development option and check USB Debugging Mode.]
3) As the tutorial might wipe out all data of the phone, create a backup. If the device is having any custom recoveries such as ClockworkMod/TWRP already installed, backup data using the recovery.
4) The Galaxy S4 should have above 80% battery charge.
5) The phone should be factory unlocked and not locked to any particular carrier.
6) The device will lose manufacturer's warranty once it is rooted. However, users can reclaim the warranty back by unrooting the handset later.
7) The CF-Auto-Root files work only on Samsung Galaxy S4 GT-I9500 and GT-I9505. As applying these to any incorrect variant might brick the device, verify the model number of Galaxy S4 by navigating to Settings>> About phone>> Model number and install the root package accordingly.
Steps to root Samsung Galaxy S4 I9500/I9505 on Android 4.3 Jelly Bean
Step-1: Download CF-Auto-Root file for Galaxy S4 to computer (Download link download.chainfire.eu/316/CF-Root/CF-Auto-Root/CF-Auto-Root-jflte-jfltexx-gti9505.zip
Step-2: Extract the downloaded root zip using Winzip, 7zip, winrar or any other extracting tool to get a file with .tar.md5 extension
CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5
Step-3: Download Odin3_v3.07. Extract the Odin zip to get Odin3 v3.07.exe file
Step-4: Switch off Galaxy S4 and wait for five to six seconds for vibration to confirm complete power off
Step-5: Place the phone in Download Mode by pressing and holding Volume Down, Home and Power buttons together until the construction Android robot icon with a warning triangle appears on the phone's screen. Then press the Volume Up button to enter Download Mode
Step-6: Run Odin3 v3.07.exe as Administrator
Step-7: Connect the phone to the computer using USB cable while it is in Download Mode. Wait for some time until Odin detects the device. When the phone is connected successfully, an Added message will appear under Odin message box. Additionally, the ID: COM box in Odin will turn blue with the COM port number indicating successful connection
Note: If the Added message does not appear, then try another USB port, try the one located at the back side of the computer. In case Odin still fails to recognise the device then reinstall USB driver.
Step-8: In Odin, click the PDA button and select CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 or CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 file according to the variants
Step-9: Ensure Auto-Reboot and F.Reset Time checkboxes are selected in Odin
Step-10: Click the Start button in Odin. The installation process should begin now and would take few minutes to complete
Step-11: When the installation process is completed, the phone will restart and soon a PASS message with a green background in the extreme left box at the very top of Odin. Once the home screen appears, unplug the USB cable from the phone to disconnect it from computer
Samsung Galaxy S4 I9500/I9505 running Android 4.3 should now be rooted successfully. You can now install any app that requires root permission. To verify the root method is installed and working properly, install Root Checker app from Google Play Sore.
Press "Thanks" if it helps
Click to expand...
Click to collapse
threads pretty out dated.... please don't copy someone else work too
Trozzul said:
threads pretty out dated.... please don't copy someone else work too
Click to expand...
Click to collapse
threads out dated??...Did i? and if i did so what? The point is to help
jamesclassy said:
threads out dated??...Did i? and if i did so what? The point is to help
Click to expand...
Click to collapse
its thankful to post the thread you got it from but dont copy it.
You Can Try framaroot look into the thread for more details:
http://forum.xda-developers.com/showthread.php?t=2130276
Sent from my GT-S5360 Using tapatalk 2
PreSS ThanKs If i HelPeD YoU ?!?
Code:
/*
* I am not responsible for bricked devices, dead SD cards.
* you point the finger at me for messing up your device, I will laugh at you.
*/
Here is the guide to flash stock firmware on our device.
Download firmware from here -
I) Bangladesh - http://rapidgator.net/file/36ba0c12184fd7da2efc9416ab2871f3/TML-N750XXUANB3-20140304171615.zip.html
II) India(INU) - http://rapidgator.net/file/af8780e8c0881c64a109888d7cc15ef3/INU-N750XXUANB3-20140228150602.zip.html
III) India(INS) - http://rapidgator.net/file/1ead801e65094b679a1b080f2260fbc5/INS-N750XXUANB3-20140228172237.zip.html
Procedure -
1. Download Odin from here - http://rapidgator.net/file/cb00b59523c1d692c0915d81d7dffdd6/Odin3_v3.09.zip.html
2. Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
3. Extract Odin zip file and you will get Odin3
v3.09.exe along with few other files.
4. Power off your Android device. Wait 5-6
seconds for vibration to confirm complete
switch off.
5. Now, put the Galaxy Note 3 Neo SM-N750 in
Download Mode by pressing and holding
down the Home & Volume Down button
together while pressing the Power button. A
warning screen will come up; press Volume
Up button to enter Download Mode.
6. Now run Odin3 v3.09.exe (see Step 3) as an
Administrator because Admin privileges is
required to complete the process smoothly
(only applicable Windows Vista and higher).
7. Now connect your device to your PC using
USB cable. An “Added!!” massage will appear
in Odin’s message box. If you don’t get the
same then you should try another USB port
(try USB port located in back in your desktop
PC). If that too don’t work then you should
reinstall the driver. If you successfully see the
“Added!!” message in Odin then you are ready
to go in next step. You should also see COM
port with a number in Yellow if you
successfully added your device.
8. Click the AP Button, and select that .tar.md5
file that you get in Step 2. If you are using old
Odin then add the file to PDA button.
9. In Odin window, make sure only Auto Reboot
and F. Reset Time check boxes are selected.
10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing
process.
11. Once flashing completed, your Galaxy Note 3 Neo SM-N750 will restart and soon you will
see a PASS message with green background
in the left-most box at the very top of the
Odin. You can now unplug the USB cable to
disconnect your device from computer.
Congrats! You just updated your Galaxy Note 3 Neo
SM-N750 to Android 4.3 Jelly Bean firmware. Go to
Settings > About device to verify this firmware
update.
Thanks for the post, would like to link it to sammobile site as well. The below link if for the Indian version. Dropdown in this site sorts option for other countries as well. Cheers.
http://www.sammobile.com/firmwares/1/?model=SM-N750&pcode=INS#firmware
Knox Counter Reset for N750
insomaniacdev said:
Code:
/*
* I am not responsible for bricked devices, dead SD cards.
* you point the finger at me for messing up your device, I will laugh at you.
*/
Here is the guide to flash stock firmware on our device.
Download firmware from here -
I) Bangladesh - http://rapidgator.net/file/36ba0c12184fd7da2efc9416ab2871f3/TML-N750XXUANB3-20140304171615.zip.html
II) India(INU) - http://rapidgator.net/file/af8780e8c0881c64a109888d7cc15ef3/INU-N750XXUANB3-20140228150602.zip.html
III) India(INS) - http://rapidgator.net/file/1ead801e65094b679a1b080f2260fbc5/INS-N750XXUANB3-20140228172237.zip.html
Procedure -
1. Download Odin from here - http://rapidgator.net/file/cb00b59523c1d692c0915d81d7dffdd6/Odin3_v3.09.zip.html
2. Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
3. Extract Odin zip file and you will get Odin3
v3.09.exe along with few other files.
4. Power off your Android device. Wait 5-6
seconds for vibration to confirm complete
switch off.
5. Now, put the Galaxy Note 3 Neo SM-N750 in
Download Mode by pressing and holding
down the Home & Volume Down button
together while pressing the Power button. A
warning screen will come up; press Volume
Up button to enter Download Mode.
6. Now run Odin3 v3.09.exe (see Step 3) as an
Administrator because Admin privileges is
required to complete the process smoothly
(only applicable Windows Vista and higher).
7. Now connect your device to your PC using
USB cable. An “Added!!” massage will appear
in Odin’s message box. If you don’t get the
same then you should try another USB port
(try USB port located in back in your desktop
PC). If that too don’t work then you should
reinstall the driver. If you successfully see the
“Added!!” message in Odin then you are ready
to go in next step. You should also see COM
port with a number in Yellow if you
successfully added your device.
8. Click the AP Button, and select that .tar.md5
file that you get in Step 2. If you are using old
Odin then add the file to PDA button.
9. In Odin window, make sure only Auto Reboot
and F. Reset Time check boxes are selected.
10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing
process.
11. Once flashing completed, your Galaxy Note 3 Neo SM-N750 will restart and soon you will
see a PASS message with green background
in the left-most box at the very top of the
Odin. You can now unplug the USB cable to
disconnect your device from computer.
Congrats! You just updated your Galaxy Note 3 Neo
SM-N750 to Android 4.3 Jelly Bean firmware. Go to
Settings > About device to verify this firmware
update.
Click to expand...
Click to collapse
Any solution of knox counter reset for N750 note 3 neo
kkbs4u said:
Any solution of knox counter reset for N750 note 3 neo
Click to expand...
Click to collapse
Yes, I do need this too!
not so easy as OP posted
once u have root and knox tripped, you cannot flash a firmware older than what u are currently running, the odin gives error while writing to nand.
so if u rooted on 4.4.2, u can only flash that, not 4.3.
FYI even if one is not rooted, u cannot downgrade
query
shavir Afroz said:
once u have root and knox tripped, you cannot flash a firmware older than what u are currently running, the odin gives error while writing to nand.
so if u rooted on 4.4.2, u can only flash that, not 4.3.
FYI even if one is not rooted, u cannot downgrade
Click to expand...
Click to collapse
How about upgrading if i had rooted on a downer version?
How to unlock bootloader of my galaxy note 3 neo SM-N750
Ok, firstly I'm newbie here :angel:
I have this Samsung GT-S6310 2 weeks ago.
I idly tried to upgrade my firmware to JB GNU ROM
First I install CWM via Odin (of course after installing the samsung drivers)
I turn on the phone with fastboot mode (Vol (-) + Home + Power)
After I tried to install CWM in Odin, there's description "FAIL"
(Checked Auto Reboot+F. Reset Time, nothing else)
I tried for a second time, remains the same
In fact, written in fastboot:
"CUSTOM BINARY DOWNLOAD: YES (2 COUNTS)
Since then, my phone is not detected on my PC.
(Problems about Samsung Mobile USB CDC ..... Error Code: 10)
Several times I installed samsung drivers on my PC, it still does not connect the phone to PC. (To the other
Any solution? Everytime I turn on my phone, it's booting to Fastboot again, again and again.
Tired searching for 5 days and got nothing.
Sorry for my bad English
hello....
first of all its called download mode not fast boot.
try to install stock rom thru odin using another pc with samsung drivers installed.
Press thanks if I helped...Sent from my GALAXY Young DUOS
same problem
moayad albalawi said:
hello....
first of all its called download mode not fast boot.
try to install stock rom thru odin using another pc with samsung drivers installed.
Press thanks if I helped...Sent from my GALAXY Young DUOS
Click to expand...
Click to collapse
i have the same problem
thank for the solution
it's work for me
rhidz.nightmare said:
Ok, firstly I'm newbie here :angel:
I have this Samsung GT-S6310 2 weeks ago.
I idly tried to upgrade my firmware to JB GNU ROM
First I install CWM via Odin (of course after installing the samsung drivers)
I turn on the phone with fastboot mode (Vol (-) + Home + Power)
After I tried to install CWM in Odin, there's description "FAIL"
(Checked Auto Reboot+F. Reset Time, nothing else)
I tried for a second time, remains the same
In fact, written in fastboot:
"CUSTOM BINARY DOWNLOAD: YES (2 COUNTS)
Since then, my phone is not detected on my PC.
(Problems about Samsung Mobile USB CDC ..... Error Code: 10)
Click to expand...
Click to collapse
i have exactly that situation,,, since then my laptop usb port not function anymore,,,
then i do this:
- restart my laptop,
- restart download mode (Vol (-)+home+power) ,
- open Odin,
- open device manager (for watching),
- connect the usb tho my phone,
- it's detected in Odin,, (Done)
- flash the original firmware,
- Done,:good: