Related
Ok, I admit I am a total noob I have only had this phone a day and I was able to get it to sync with my computer last night. However, today when trying to sync I plug it in and activesync makes a sound like its recognized the device but does nothing and continues to say the device is not connected.
I am using the standard rom and have enabled data communications in the connections screen. I have tried hard and soft resets.
Please help me...
Also on a weird note it is detecting the device as a file drive but it has a ton of photos and music that I did not load onto the phone in the device folder. Also the mobile device folder is empty.
Thank you in advance.
Go to Start-> Settings -> Connections-> USB to PC and uncheck the "Enable advanced network functionality".
Connect your mobile to PC. It will be recognized (but not synch) by the ActiveSynch.
Then take it out and re-enable the "advanced network functionality".
Connect your mobile to PC agian and it will work again.
This works for me. It happened yesterday.
No go. Windows recognized it as an mobile device but activesync was still unable to connect to the device.
Also, when connecting the device as a disk drive I can see some apps i've installed in the program file, but it is still showing alot of items I didn't add. These files don't appear to be on the device. After deleting those extra files I tried to send new pictures to the device which would not transfer.
Any Ideas?
So I got my shiny new LG Incite at Best Buy yesterday. I knew I was getting it a while ago, so I downloaded a bunch of games and apps to load it up with as soon as possible. I get home from the store, play around with it and let it charge for a while, then I try to connect it to my computer (After installing ActiveSync 4.5 from the included disk, as well as both of the USB drivers on the disk). Windows comes up with that "found new hardware" stuff and asks where to look for the driver to install. I tell it to look on the CD, as well as the directories where the USB drivers from the disk were installed. It looks like it's working at first, but then I get this error:
(Error: "The data is invalid.")
Then it gives me the message balloon about how there was an error during installation and my new hardware may not work properly, etc. Now when I go to Device Manager, a number of things showed up with that little yellow exclamation point that I'm pretty sure were not there before, but I could be wrong:
- IEEE 1394 Bus host controllers: VIA OHCI Compliant IEEE 1394 Host Controller
- Network Adapters: Unknown device, WAN miniport (L2TP), WAN miniport (Network Monitor), and Windows Mobile-based Device
- Ports (COM & LPT): Communications Port (COM1)
So I tried reinstalling the drivers from a link I found in a thread on these boards (after clicking uninstall for "Windows Mobile-based Device" and having it tell me that the device is necessary to boot up the computer), but the same thing keeps happening. I also tried having ActiveSync scan for devices, but it never finds anything (Just says that USB is "available").
Please help, I really want to start putting pictures, music, and all that good stuff on my brand new phone
(btw, I'm pretty sure the problem is with the software/drivers on the computer, because when I plug in the USB cable the phone starts to charge. Other than that, nothing happens on the phone.)
If at all possible, I would try using the phone with another computer. For quite some time I was only able to sync data with my laptop and not my desktop, so I knew it was a software issue and not the phone itself.
would say it's down to
dead activesync install and no uninstalling it is not enough one have
to remove all traces of it in registry too
and it could also be an issue with usb drviers for the motherboard
chad.pflughaupt said:
If at all possible, I would try using the phone with another computer. For quite some time I was only able to sync data with my laptop and not my desktop, so I knew it was a software issue and not the phone itself.
Click to expand...
Click to collapse
Well, I'm not going to have another computer until September at least, so I really want to get it working on this computer, but I guess I could test it out on a friend's pc to see if my computer is the problem.
Rudegar said:
would say it's down to
dead activesync install and no uninstalling it is not enough one have
to remove all traces of it in registry too
and it could also be an issue with usb drviers for the motherboard
Click to expand...
Click to collapse
Know of any links or tutorials that would tell me all of the registry entries I'd have to remove?
(Sorry for the double post, but no one was replying...)
So I found my bluetooth adapter for my PC, and after I installed the proper software I could connect to my phone no problem. After that, I just used the bluetooth adapter's software to transfer files to my phone via FTP. (ActiveSync still just sat there, even when I set my phone to sync with bluetooth instead of USB, and I allowed wireless connections in ActiveSync)
So I'm glad I can finally transfer files, but I still want to get USB working. No one has any ideas at all?
(Triple post... sorry)
Ok, something happened to the bluetooth drivers and software now. I turned my computer off for the night after using bluetooth to transfer files to my phone, but when I turned on my pc today and clicked the shortcut to start the bluetooth software, I got a message saying that the program the shortcut was linking to no longer existed. Sure enough, the folder was gone from my Program Files directory. Now, every time I try to reinstall it, I get an error 183 that installation was interrupted.
So now I'm back to having no means of transferring files to my phone.
Please, any suggestions at all will be helpful to me at this point. I'm at my wits end!
Any progress on this?
I have a similar problem. I think usb sync worked on my laptop at one point, but hasn't for at least a week.
I was able to fix the problem at least temporarily by disconnecting the device, deleting it from ActiveSync and reconnecting. ActiveSync happily added it back and resynced everything. Now I can install the new Xcite ROM.
Still nothing...
Now my computer doesn't do anything at all when I plug my phone in, not even make a noise or ask about drivers. My phone, however, still recognizes that it's plugged in.
At least I got bluetooth working again, but still, USB would be nice.
It's hard to believe that out of every member on this forum, no one has even the slightest idea of where to start...
Menu - settings - connections - USB to PC.
Uncheck Enable advanced ...
OK TO ALL AND READY
So I'm having a strange and annoying problem with my sgs3, I'm running windows xp, and when I connect my phone it shows up in 'my computer' as SCH-I535. The problem is, when I open that folder.. it is empty (shows no directories at all) when I'm connected as media device. However, if I switch from media device to camera and back to media device, I am then able to see the directories.. This is extremely annoying to have to do this every time I connect my phone in order to transfer files. I have uninstalled and reinstalled the drivers twice, with reboots and all.. Still doing the same thing. If anyone could help me figure this out, It'd be MUCH appreciated.
I've had this problem before, but I have always been able to fix it by uninstalling ADB and drivers, through WUG's toolkit, changing cables, device manager/update drivers, jumping up and down while spinning and plugging cable in, among other things. However, this time is different and I'm not sure if it is because of M on my phone or the Windows 10 update. This problem has been going on for over a month now, and I've had both since it started. I've tried all the above mentioned things, along with everything else I can find, and none of them work.
The only way I can get my computer to recognize my phone to share files is to go into device manager every I plug it in is to; go to device manager, right click to update driver, select do it from my pc, select driver in folder. After doing this it works perfectly fine, but I have to do it every time I plug my phone in or every time my phone turns off while it's plugged in. The error message I get on my computer is "USB device not recognized" when I go into device manager it says "device descriptor request failed" It does this on both of my PCs. Any ideas or help would be greatly appreciated!
DT USC said:
I've had this problem before, but I have always been able to fix it by uninstalling ADB and drivers, through WUG's toolkit, changing cables, device manager/update drivers, jumping up and down while spinning and plugging cable in, among other things. However, this time is different and I'm not sure if it is because of M on my phone or the Windows 10 update. This problem has been going on for over a month now, and I've had both since it started. I've tried all the above mentioned things, along with everything else I can find, and none of them work.
The only way I can get my computer to recognize my phone to share files is to go into device manager every I plug it in is to; go to device manager, right click to update driver, select do it from my pc, select driver in folder. After doing this it works perfectly fine, but I have to do it every time I plug my phone in or every time my phone turns off while it's plugged in. The error message I get on my computer is "USB device not recognized" when I go into device manager it says "device descriptor request failed" It does this on both of my PCs. Any ideas or help would be greatly appreciated!
Click to expand...
Click to collapse
I think I'm getting something similar since I've installed "M"....
Under:
Settings -> Developer Options -> Select USB Configuration
It say's it's set to "MTP (Media Transfer Protocol)"; it really isn't. When I plug the phone in, under Win 8.1, a desktop window opens with "AOSP on Hammerhead" (or something like that), but there's nothing in it. Now for some magic....
With the phone in one hand, and the mouse in the other:
1. Open Settings -> Developer Options -> Select USB Configuration
2. Touch "MTP (Media Transfer Protocol)" (even if it's already selected)
3. Listen for the PC/Windows Desktop (it should give an audible sound)
4. Immediately click on the "AOSP on Hammerhead" text in the path listed on the open Windows widow ("This PC -> AOSP on Hammerhead")
5. You should see an "Internal Storage" folder appear
6. Open the folder, enjoy MTP
Brand New Unlocked S8+... Tried to connect it to my PC to use a previous copy of smart switch backup but it never connects.. Windows Explorer never displays a mounted drive either. Smart Switch Eventually comes back with Failed to connect to the device.
The Phone displays the "Attention The connected device is unable to access data pm this device. Reconnect the USB cable and try again...."
Phone is on Transfer Media files (MTP)
USB Debugging is one.
Device Manager says "Samsung Android Phone - SAMSUNG Android ADB Interface" two times - No red or yellow exclamations.
I've removed the software in device manager and restarted both the phone and the laptop multiple times.
I updated Smart Switch and did More\Reinstall Device Driver.
Does anyone else have any workarounds for this? I found one article (https://www.recovery-android.com/connect-samsung-to-computer.html) but still no success.
I actually have the exact same issue on windows 10. Anyone figured out a solution?
Doesn't seem like there is much help here on the 2 Samsung formums I posted on....
I know its not my windows profile as I have tried 3 different profiles as well as safe mode.
Tried 2 different sets of Samsung USB drivers and no improvement.
Like I said I had no issues on a windows XP machine or a windows 10. I didn't even need to install the USB drivers/Smartswitch on either of those machines.
We can't be the only 2 people!
Kalveitt said:
I actually have the exact same issue on windows 10. Anyone figured out a solution?
Click to expand...
Click to collapse
Firstly, i cannot give you direct answers.
Just my thoughts.
i have a S8+. No root stock as is.
I have Lenovo laptop Win 10.
From day one, out of box, i connected
S8+ and it connected. I can do whatever
i want. Transfer data, photos videos.
ADB etc
So it should work...?
However i do realize there are quite a few things to consider......
Samsung drivers on laptop and a few other
issues..... eg
For one,
have you enabled
in Phone /Settings /Developers Option /Usb debugging.?
Normally first time when you connect
With pc /laptop you should get
a small pop-up message(on device) to allow
phone to connect.?
(that's my experience, over years)
Good luck
Yes, USB Debugging is on and connection is set to MTP.
Windows recognizes "USB Android" but dosnt install the driver successfully.
It will appear as a modem in Device manager but nothing is mountable.
I have 2 desktop pcs with win 10. One with samsung software Kies 3 and smart switch installed and the other no samsung software. Both find the device Galaxy S8+, in device manager under universal serial device controllers i have Samsung Mobile USB Composite Device. You have an adb driver I think because you have usb debugging on, i would turn usb debugging off. The pc should find a device connected to the usb and download a driver, once done the device is recognised as galaxy S8+ in my case but will not communicate with the pc until the phone has given permission. On the phone will be a message asking you to allow the connection. Hope this helps ??
psuhbggrad said:
Yes, USB Debugging is on and connection is set to MTP.
Windows recognizes "USB Android" but dosnt install the driver successfully.
It will appear as a modem in Device manager but nothing is mountable.
Click to expand...
Click to collapse
Firstly i do understand that you
must be quite annoyed trying to figure
out issues. (I would) Thankfully i don't.
Bottom line is that it should work..!
My experience confirms, that S8+/laptop Win 10 works.... 100%when connected
However a few suggestions.
If you feel you checked all checkbox.?
However you never said anything
about popup notice ? granting premission
for device to connect.?
So device /laptop /pc is not "seeing" each other?
All Samsung devices I have used, first time connection gives me this popup a notice
Can't remember exact wording.
Something... eg
Device id 5786446.......
Have or does your other Samsung devices
connect etc.?
Have you tried connecting to a friend pc laptop.
An option is to go to a Samsung Care Center
and as them to test and connect.
My experience (in past) is that they should
assist you.
If it connects to friend pc or Service provider /Samsung Care Centre.
Then surely it has to be your pc/laptop?
So I turned off usb debugging and revoked the permissions on the phone, connected it to my PC.
Samsung Android (with a Yellow Exclamation) was already present in Device Manager under "other devices" so I uninstalled that.... and rescanned. My laptop attempted to reinstall but it generated a Driver Installation Failed message on "SAMSUNG_Android" - no driver found.
Device Manager once again shows the Yellow Exclamation Point
I would go on to Samsung support look up the phone and download the usb driver and install from the download. Good luck
I've downloaded the drivers from Samsung 2x.
psuhbggrad said:
So I turned off usb debugging and revoked the permissions on the phone, connected it to my PC.
Samsung Android (with a Yellow Exclamation) was already present in Device Manager under "other devices" so I uninstalled that.... and rescanned. My laptop attempted to reinstall but it generated a Driver Installation Failed message on "SAMSUNG_Android" - no driver found.
Device Manager once again shows the Yellow Exclamation Point
Click to expand...
Click to collapse
I can vaguely remember that i had this same
issues with my Note 5 and Win 10.
This was many months/year or two, ago.
I also had yellow exclamation etc.
Further in Device manager( laptop) kept installing wrong Samsung drivers.!
I uninstalled drivers/installed and battle for a few months like this Then one day Windows
did an update and in update i noticed
Samsung drivers included etc. (must have been correct)
Ever since that update i had no issues again.
Bottom line... some drivers issue?
Not S8 +?
Good luck
psuhbggrad said:
Brand New Unlocked S8+... Tried to connect it to my PC to use a previous copy of smart switch backup but it never connects.. Windows Explorer never displays a mounted drive either. Smart Switch Eventually comes back with Failed to connect to the device.
The Phone displays the "Attention The connected device is unable to access data pm this device. Reconnect the USB cable and try again...."
Phone is on Transfer Media files (MTP)
USB Debugging is one.
Device Manager says "Samsung Android Phone - SAMSUNG Android ADB Interface" two times - No red or yellow exclamations.
I've removed the software in device manager and restarted both the phone and the laptop multiple times.
I updated Smart Switch and did More\Reinstall Device Driver.
Does anyone else have any workarounds for this? I found one article (https://www.recovery-android.com/connect-samsung-to-computer.html) but still no success.
Click to expand...
Click to collapse
In the past I had this problem I downloaded USBDeview to my PC and deleted all of the old Samsung drivers, after rebooting the PC the phone was able to connect with the PC.
Tried USBDeview and removing the Samsung drivers but no difference
Still unable to connect.
I'm having this problem as well. I'm still trying to work it out, but when I remove and re-add the device through Device Manager I get this error: "An existing device was found that is a duplicate of the device being manually installed" and the device DOES connect as a camera, just not for full file transfer.
I had the same problem and tried many of the fixes, including different USB cables and different computers and different phones. I finally figured out that the case I had on the S8+ was the problem (at least for me). I took it off and everything works.
Hi, i have a pc with windows 10 . In device manager under universal serial device controllers i have Samsung Mobile USB Composite Device. i think you should meet best mobile shop.
jimmygarison said:
Hi, i have a pc with windows 10 . In device manager under universal serial device controllers i have Samsung Mobile USB Composite Device. i think you should meet best mobile shop.
Click to expand...
Click to collapse
I have Windows on Lenovo Laptop with latest Windows updates installed. Yesterday, I downloaded Samsung Smart Switch unlocked the phone and connected it to the laptop. Smart Switch found it immediately and I did a backup. I did not need to check Device Manager. It must be a drivers problem as mentioned above.
Note 8, getting "Attention The connected device is unable to access data pm this device."
And I am only able to see some files, Sammy is a crazy fool, this is basic stuff
installed the windows fall update a week ago now connect my phone to my laptop and nothing is recognised, no phone memory and no memory card just a empty space when i click the icon where my phone should be, i've had samsung drivers installed and they have worked fine so far till today, any ideas where to find the latest drivers? and what else i can do to get access to my phone on my laptop?
solution that worked for me
On my windows 10 PC, I opened device manager (open up start and just type 'device manager') and under portable devices there was a usb device called MTP USB device or something like that (I forget the exact name) with a small triange and an exclamation mark next to it. I clicked on that and then clicked "update drivers." When the prompt comes up I chose the automatically look for drivers option. This fixed the issue and now my Galaxy s8 is recognized (it no longer says MTP USB device or whatever it was). Hopefully this works for others as well. You can also probably download the usb drivers for the phone from samsung.