Hello,
I've got the HTC Touch Pro.
Since a few days it has got an annoying problem. It doesn't go automatically into the standby mode so the battery is very fast empty when I doesn't look often at it and set it manual into the standby mode.
I setted in the configuration, that the mobilephone should go into standby after 1min.. also it should go darker after 1min
Because I bought the phone from the german provider Vodafone I've got the ROM-Version "1.90.162.5 GER".
I hope someone here can help me because its so annoying to charge it every second I'm at home.
Thank you very much and many greetings,
creakie
-----
Sorry for my english
Hello!
How can I deactivate the sound which is playing when opening the "PIN-input-"screen?
Background:
I'm using phonealarm to switch the profiles. The night-profile deactivates all sounds and the phone part. At 7 o'clock the profile is switching back to the standard-profile where the phone part is reactivated. Phonalarm is automatically entering the pin and join the network, but when the profiles are switching, it will do two short beeps by entering the pin-input-screen. What can I do?
found a solution on my own.
I am switching first to the meeting-profile, there the sound is deactivated but the phone part is activatet, so the phone will logging into the network. after 1 minute it will switch to the standart-profile.
ltoykri said:
found a solution on my own.
I am switching first to the meeting-profile, there the sound is deactivated but the phone part is activatet, so the phone will logging into the network. after 1 minute it will switch to the standart-profile.
Click to expand...
Click to collapse
Have you tried going into settings>sounds and notifications > and uncheck screen taps and hardware buttons ?
Hi, If I answer the call or i telephone to somebody display turns off after 5 sec. and after 1 minute is again on, but sometimes display isn't after 1minute on and call and signal is ended. could you help me if somebody understand my english : ).
Try following settings to overcome call ending and signal loss problem
arnost1111 said:
Hi, If I answer the call or i telephone to somebody display turns off after 5 sec. and after 1 minute is again on, but sometimes display isn't after 1minute on and call and signal is ended. could you help me if somebody understand my english : ).
Click to expand...
Click to collapse
I have changed following settings. It is working fine from last two days.
No Call drop problem
1. File system cache Enabled
2. File System Cache 2MB
3. File System Filter Cache 4090 sector
4. Glyph Cache 64KB
5. gprs auto Attach disable
Hello
i have a strange problem, but i dont know when it really started
i have an htc touch pro, latest official firmware
it seems the device ignores all suspend settings
settings are:
turn off backlight if device not used for 1 min
turn off device if not used for 2 min
but the device goes black after approx 28 - 30 secs sometimes longer, but thats the usual time
anyone any ideas what could be causing this type of behavior ?
Hy,
you have the setting for each of the battery operation and mains operation done?
Greatz
mccoffein
yep done both
hi all,
has anybody experienced delays in getting sms?
im trying to figure it when the device (tg01) is in sleep mode, would it still recieve sms, mms?
occasionally when i bring it out of sleep mode it comes up with no signal, then after 2 seconds full signal and the orange logo.
is this a graphics glitch or is it actually no signal?
anyone else have this problem or just me?
I've noticed it going through the "registering" graphic a few times when it comes out of sleep mode. Not sure if it really had no signal or not. Haven't tried testing SMS speeds, but I normally receive SMS and calls during sleep no problems. Having said that, there were a few test calls I did while the device was asleep that didn't go though. Not quite sure why.
ive had my wife text me and i dont recieve it til i resume from sleep.
it must have something to do with the radio going into powersave or something. been hunting through the reg trying to find a graphic refresh key but nothing yet.
What are your Power Saving Settings set to, out of interest?
my power saving are as follows
cpu-medium with "limit cpu to save battery" unticked
auto sleep set to 5 minutes
wifi is set to balanced with no restrict sleep mode and no enable during sleep
backlight is set to 1 minute and light on when button pressed is ticked
i currently get 2 days with moderate usage, if i forget to turn wifi off then its dead by the time i get into bed
do you have the same problem or experienced anything similar?
Like I said above, I did a few test calls while the device was asleep that didn't go though, but haven't really experienced the same problems as you.
My power saving settings are:
CPU speed: HIGH
Limit CPU speed for battery: OFF
WIFI: Favour Transmission Rate
Restrict Sleep Mode: OFF
Restrict WIFI during sleep mode: GREYED OUT
Turn off backlight if not used for: 30 SECS
Turn on backlight when button pressed or screen tapped: ON
Adjust brightness automatically: OFF
Brightness: MID-WAY
Sleep Mode if not used for: 5 MINS
Are you on orange?
do you use 2g or 3g?
im not entirely sure how to find out my 2g-3g status as all the icons look the same
my sims an orange 2.5g payg
I'm on Orange 3g payg. I would seriously recommend upgrading to a 3g sim card. Just go into an Orange shop, explain that you're a "pay as you go" customer (don't say "payg") with a 3g phone but only a 2g sim. Say that you want to do a "sim upgrade" to a 3g sim. They should handle that there and then for you. Don't let them tell you you need to call 450, because you don't. They can do it right there in the shop.
You can tell your 2g-3g status by looking at the icon to the left of the signal strength on the top status bar. If it says 3G+ then its connected to the 3g network. If it has a big G then its connected to the 2g (GSM) network.
i only get a g with crossed lines in it like a mesh, tbh the guys in my orange shop are utter smug **** heads so ill prob phone up and have a moan, get some freebies.
just put of interest do you know what the axcon.dll does?
axcon.dll is the library for accessing the accelerometer in the TG01. See here for more details.
its a shame the work stopped where it was, i tried upping the dword of 101 to 256 and i had to hard reset my phone, butr gay, but maybe smaller increments may work to speed up the rotation speed
Not quite sure what you mean. I only briefly skimmed over the blog post, but from what I can tell they successfully got a C# library working as well as a JavaSE (Mysaifu JVM) library, mentioned in the blog post comments.
From what I see, the only thing we still need is an HTC/TG01 wrapper, so that apps designed for the HTC accelerometer will work on the TG01.
yeah, they have set up a driver to catch all the tg01 sensor calls and translate it into the htc type. but theres just source code, no one has seemed to take this further