Hi to all!
I have a little problem and I think it's just a change on a registry key...
When I enable WLAN on the phone for downloading some files or update weather data or something like this and the display lights went off automatically after 30 seconds than the WLAN connection went also down.
Does somebody know how to change/fix this?
Thanks in advance,
Marko
http://forum.xda-developers.com/showthread.php?t=273990
Read Here..... Not sure it's effectiveness as you haven't given your phone make....
Hey all,
Recently i've been having some problems with my emails coming through to my handset. I have the settings set to send/receive every 5 minutes.. but for some reason if my screen is turned off (phone on standby) no email comes through but when i turn my screen back on the emails come.
Has anyone else has this problem? I've never had this problem before it started out of no where...
Which software are you using as your email handler?
The original software that came with the phone.. I havn't installed anything on the phone its at its original state...
jayt2008 said:
Hey all,
Recently i've been having some problems with my emails coming through to my handset. I have the settings set to send/receive every 5 minutes.. but for some reason if my screen is turned off (phone on standby) no email comes through but when i turn my screen back on the emails come.
Has anyone else has this problem? I've never had this problem before it started out of no where...
Click to expand...
Click to collapse
are you using wifi or data connections? If its wifi do you have wifi enabled during standby?
i am using data...like i said if my screen is turned on theres no problems at all but its just when the screen is off in stand by mode no emails will come through..
This is a huuuuge issue which stems from the dawn of WM6. To be honest, it works sporadically for me. A few hours of no email, then a whole group arrives at a time. Sometimes it wont check by itself all day. Other times it will go 1-2 days without missing a beat. This makes it really hard to determine if what I have been doing fixes it.
Here are links to threads I have dug up:
http://forum.xda-developers.com/showthread.php?t=420513
^This is not a good fix imo, as it forces your data connection to be awake 24/7, killing your battery.
http://forum.xda-developers.com/showthread.php?t=437199&page=2
^ I am using the outlook email scheduler. Not sure if its working, or placebo. It still doesnt stick to every 30 mins, sometimes an hour late heh. At least you can have day/night settings and weekend settings. Maybe not a perfect fix, but increases email checking options.
http://forum.xda-developers.com/showthread.php?t=332362
^ Many Kaiser users had/have same problem, no solution found.
http://forum.xda-developers.com/showthread.php?t=445434
^Same problem, no fix in the Blackstone forum.
Thanks everyone for the help.
There has to be some kind of fix out there somewhere.. its unreliable
could try out the seven beta app
If I might make a suggestion...
Maybe you should edit the thread title to "No email in standby" as "Email..." doesn't really tell the story, more people will be likely to find it and post a solution
Problem solved with my Touch Pro
I also had this problem but I found the settings to change this. But you do need schaps advanced config 3 (and a regeditor) to make it happen. Now i always receive my email, it checks every 10 minutes, even in standby mode, with my own data connection.
With a registry editor go to:
HKLM - Comm - ConnMgr - Providers - [GUID] - Connections - [Connection Name] - Always On
and change this value from 0 to 1
(You can also change this setting with Schaps' Advanced Config under menu (right softkey) - More Settings - Connections.
Here you can select "Always On" for the type of data-connection that you use to receive your email)
The second thing is using advanced config and change the setting under power management:
- AC resuming from suspend timeout
- Battery resuming from suspend timeout
I have changed both to 60 seconds.
Now my touch pro is notifying me of new email, even in standby mode.
Good luck
^ by forcing the eternal data connection, are you not killing the battery? I think the phone should be able to connect, query, download emails, disconnect at set intervals while in standby. I think it is supposed to, but for some reason it doesn't do it reliably.
The way I have done it is to use SKSchema to watch for a data connection being connected and turn on the screen when this event happens. This wakes th ephone up and is able to download email. Then I use advance config to close inactive data connection after 10 seconds. As the phone is awake the data disconnects fine. As long as your phones screen is set not to power off quickly, mine is a minute it should be fine.
In the last day I got fed up with TF3D again and turned it off, email seems to check every 30 minutes. I'll let it go for a few days to make sure its not placebo effect.
Anybody here having this problem while manila disabled? Perhaps there is some obscure power saving setting running in the background of manila
Well i have no idea how to fix this problem.. i have played with my phone to try figure it out but nothing.
I will probably have to take rvjacobs advice and see if that works.
It looks like quite a few people are having this same problem.
Its weird.. If my phone is on standby no email comes through..but if its on standby and an SMS comes through, the screen doesnt wake but the email also comes through..
not sure whats happening there.
Mine does it with TF3D disabled also. Thats why I have to use SKSchema to turn the screen on when it detects an internet connection. This way, mail comes through fine and it also auto disconnects the data.
I can now confirm that the issue is still there, regardless of TF3D. Damn, I've tried everything, maybe this is a dead end... Maybe wm 6.5 will see a solution
Maybe it helps you to look for/change the following key:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\Timeouts]
"ACResumingSuspendTimeout"=dword:00000001
"BattResumingSuspendTimeout"=dword:00000001
If you've got these values in the registry, try to cange them to
"dword:0000001e"
It's the time in seconds the device keeps running (without turning on the display) when it's automaticly woke up from the suspend mode (i.e. to look for mails). And if the value is "1", the time might be to short for picking up your emails.
With the new value you set the time up to 30 seconds.
The key exists since WM2003 and most of roms had a higher value in the past. But in the last time more and more roms come with a value of 1. I think its because the manufacturers want to get a good standby time for the devices...
I hope it works for you and you won't have to wait for WM6.5
Thanks for that deroland! I did manage to find them in the reg but it just says "Value Data 1".. doesnt say anything like "dword:00000001"?
I am new to this whole thing so it may be a stupid mistake im making..
jayt2008 said:
Thanks for that deroland! I did manage to find them in the reg but it just says "Value Data 1".. doesnt say anything like "dword:00000001"?
Click to expand...
Click to collapse
Then your value is like "dword:00000001". This is a hexdecimal dword key.
So your device has one second to look for new mails.
Try to change it to "1e" and I hope it will help you.
jayt2008 said:
I am new to this whole thing so it may be a stupid mistake im making..
Click to expand...
Click to collapse
The only stupid thing is that there is no open support by the manufacturers of the devices and microsoft for windows mobile. They only want to make their money ignoring the problem we have by the stuff they sell.
deroland said:
Maybe it helps you to look for/change the following key:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\Timeouts]
"ACResumingSuspendTimeout"=dword:00000001
"BattResumingSuspendTimeout"=dword:00000001
If you've got these values in the registry, try to cange them to
"dword:0000001e"
It's the time in seconds the device keeps running (without turning on the display) when it's automaticly woke up from the suspend mode (i.e. to look for mails). And if the value is "1", the time might be to short for picking up your emails.
With the new value you set the time up to 30 seconds.
The key exists since WM2003 and most of roms had a higher value in the past. But in the last time more and more roms come with a value of 1. I think its because the manufacturers want to get a good standby time for the devices...
I hope it works for you and you won't have to wait for WM6.5
Click to expand...
Click to collapse
This is a setting which can be changed in advanced config, under power. I have mine set to 90 seconds, to no avail. I think this is what is causing it to work sporadically, as opposed to not at all.
Hello,
since a few days I'm testing the new Mobile Shell 3. My first impression is very well. But one thing causes problems.
While I had installed Mobile Shell 2.x I was using S2U2 to make my device switch off.
S2U2 settings -> device switches off 10 sec after background-light turned off
WM6 power-settings -> background-light turns off after 15 sec - device switch off is not activated.
Everything worked fine... Background-light turns off after 15 sec. Further 10 sec later device switches completely off...
Now I've upgrated Mobile Shell 2 to version 3 but I've absolutely nothing changed on any settings - and suddenly S2U2 doesn't switch off my device any more...
My PPC turns off background-light after 10 sec (everything ok) - but S2U2 seems not to be able to switch off the device completely. Display is still on and shown darkly. But Touchscreen has turned off (doesn't react on finger-tapping).
When I close Mobile Shell everything works fine again.
So it seems that MS3 is blocking the suspend mode of some programs.
I think with Nitrogen (Mp3-player) it was nearly the same. In this prog does exist a suspend button but by tapping it only background-light switches off...
Anybody an idea or made same experiences?
Thank you
flahn
why don't you just change it in your setting of the battery in WM? I have a Lg ks20 and i change it there so after 1( sec he turns of the light) and after 3 minutes he switches off my phone. I also have spb mobile shell 3.0 and there are bugs in it atm.
Just click on your battery and go to the advanced tab.
Hope this helps you a bit
Switchke said:
why don't you just change it in your setting of the battery in WM? I have a Lg ks20 and i change it there so after 1( sec he turns of the light) and after 3 minutes he switches off my phone. I also have spb mobile shell 3.0 and there are bugs in it atm.
Just click on your battery and go to the advanced tab.
Hope this helps you a bit
Click to expand...
Click to collapse
Hello Switchke,
thanx for your answer.
My problem is a little bit complicated.
I'm using my KS20 in combination with the prog phoneAlarm. For me it's the only possibility to get the LED's of my KS20 turn on (if there is an new SMS for example) although it is in suspend-mode. Or do you know another way to make the LED's shine when device is turned off?
I got the same idea you described before. I changed the settings of power options in wm and deactivated s2u2. But it appeared a new problem.
If there is an unread SMS phoneAlarm is set to send every x seconds a signal for the LED to light it up. In older Mobile Shell 2.x or by turning off MS3 everything works fine - after 15 sec light turns off, after 1 min device switches off.
But by using MS3 the device every 10 sec after switching off turns on again (because of the signal of phoneAlarm I think). Problem only causes with MS3.
If I can't find a solution I will reinstall MS2 - the shining LED is very useful for me because I don't have to switch on device every time for looking after unread sms or new calls...
hi all,
has anybody experienced delays in getting sms?
im trying to figure it when the device (tg01) is in sleep mode, would it still recieve sms, mms?
occasionally when i bring it out of sleep mode it comes up with no signal, then after 2 seconds full signal and the orange logo.
is this a graphics glitch or is it actually no signal?
anyone else have this problem or just me?
I've noticed it going through the "registering" graphic a few times when it comes out of sleep mode. Not sure if it really had no signal or not. Haven't tried testing SMS speeds, but I normally receive SMS and calls during sleep no problems. Having said that, there were a few test calls I did while the device was asleep that didn't go though. Not quite sure why.
ive had my wife text me and i dont recieve it til i resume from sleep.
it must have something to do with the radio going into powersave or something. been hunting through the reg trying to find a graphic refresh key but nothing yet.
What are your Power Saving Settings set to, out of interest?
my power saving are as follows
cpu-medium with "limit cpu to save battery" unticked
auto sleep set to 5 minutes
wifi is set to balanced with no restrict sleep mode and no enable during sleep
backlight is set to 1 minute and light on when button pressed is ticked
i currently get 2 days with moderate usage, if i forget to turn wifi off then its dead by the time i get into bed
do you have the same problem or experienced anything similar?
Like I said above, I did a few test calls while the device was asleep that didn't go though, but haven't really experienced the same problems as you.
My power saving settings are:
CPU speed: HIGH
Limit CPU speed for battery: OFF
WIFI: Favour Transmission Rate
Restrict Sleep Mode: OFF
Restrict WIFI during sleep mode: GREYED OUT
Turn off backlight if not used for: 30 SECS
Turn on backlight when button pressed or screen tapped: ON
Adjust brightness automatically: OFF
Brightness: MID-WAY
Sleep Mode if not used for: 5 MINS
Are you on orange?
do you use 2g or 3g?
im not entirely sure how to find out my 2g-3g status as all the icons look the same
my sims an orange 2.5g payg
I'm on Orange 3g payg. I would seriously recommend upgrading to a 3g sim card. Just go into an Orange shop, explain that you're a "pay as you go" customer (don't say "payg") with a 3g phone but only a 2g sim. Say that you want to do a "sim upgrade" to a 3g sim. They should handle that there and then for you. Don't let them tell you you need to call 450, because you don't. They can do it right there in the shop.
You can tell your 2g-3g status by looking at the icon to the left of the signal strength on the top status bar. If it says 3G+ then its connected to the 3g network. If it has a big G then its connected to the 2g (GSM) network.
i only get a g with crossed lines in it like a mesh, tbh the guys in my orange shop are utter smug **** heads so ill prob phone up and have a moan, get some freebies.
just put of interest do you know what the axcon.dll does?
axcon.dll is the library for accessing the accelerometer in the TG01. See here for more details.
its a shame the work stopped where it was, i tried upping the dword of 101 to 256 and i had to hard reset my phone, butr gay, but maybe smaller increments may work to speed up the rotation speed
Not quite sure what you mean. I only briefly skimmed over the blog post, but from what I can tell they successfully got a C# library working as well as a JavaSE (Mysaifu JVM) library, mentioned in the blog post comments.
From what I see, the only thing we still need is an HTC/TG01 wrapper, so that apps designed for the HTC accelerometer will work on the TG01.
yeah, they have set up a driver to catch all the tg01 sensor calls and translate it into the htc type. but theres just source code, no one has seemed to take this further
Hello.
How I can reset (set to 0) phone usage statistics (call duration timers)?
I found 4 dead pixels on screen, but for replacing the phone right in the shop I need to have max 15 minutes call duration.
I can see statistics by dialing *#*#4636#*#*
Thanks and sorry for my English.
johnny170 said:
Hello.
How I can reset (set to 0) phone usage statistics (call duration timers)?
I found 4 dead pixels on screen, but for replacing the phone right in the shop I need to have max 15 minutes call duration.
I can see statistics by dialing *#*#4636#*#*
Thanks and sorry for my English.
Click to expand...
Click to collapse
I´m looking for this stastistic but this number don´t work for me