Related
I flashed the leaked froyo firmware I897UCJI6 on my samsung captivate using odin 1-click method. I have a working 2.2 now. My phone is not rooted. I am planning to flash a custom ROM and try other custom ROMs out there in the market. I've gone through a three part video series by mobiletechvideos on how to root and flash a custom ROM (http://forum.xda-developers.com/showthread.php?t=884364). But, i still have a few questions.
1. For rooting, do i need to flash the phone back to the stock JF6?
2. In the xda link given above, i am fine until step #4. Step #5 is a little bit confusing to me. After i copy the root file to the root directory in the internal sd card on my phone, i rename it to update.zip. Also, i copy the clockworkrecovery to the root directory in the internal sd card in the phone and rename it to update.zip. Now, after i am doing with rooting and clockworkrecovery, i have to proceed further to flash the custom ROM. Now, the steps mentioned in the xda forum does not say anything about moving the custom ROM file to the root directory in the internal sd card on the phone. My question is: Do i need to copy the custom ROM zip file into the root directory of the phone? Do i need to rename the custome ROM file to update.zip as well?
Someone please help.
Yes rom goes on sd, no do not rename
If you are on ji6 you will not be able to install clockwork because of 3e recovery. Two option, flash back to stock using
http://www.fileserve.com/file/emnCn2j
One click odin, provided you are at&t and build number is 1009 and lower located under battery
2 look for modded 3e recovery in. development for captivate posted by exist
mcord11758 said:
Yes rom goes on sd, no do not rename
If you are on ji6 you will not be able to install clockwork because of 3e recovery. Two option, flash back to stock using
http://www.fileserve.com/file/emnCn2j
One click odin, provided you are at&t and build number is 1009 and lower located under battery
2 look for modded 3e recovery in. development for captivate posted by exist
Click to expand...
Click to collapse
Thanks for the reply. What is 3e recovery by the way? I am able to flash back to stock (jf6) using odin 1-click by following the volume up + down method to download. My build number is not in that 1000 series. Are you referring to s/n number found under the battery? In many threads I have seen ppl saying if u r under 1009 build # then you need to use 3 key combo method. You are saying the opposite. I am confused now. Sorry sir but I think I need.more explanation. I thank you for your time
Sent from my SAMSUNG-SGH-I897 using XDA App
Are you on at&t
If you can get into dl mode issuing volume and usb then you have three button combo. Later builds can not use jf6 stock 1010 and up. Your build had to be there, and I do not think it its possible it is not in the 1000s if you have a captivate
mcord11758 said:
Are you on at&t
If you can get into dl mode issuing volume and usb then you have three button combo. Later builds can not use jf6 stock 1010 and up. Your build had to be there, and I do not think it its possible it is not in the 1000s if you have a captivate
Click to expand...
Click to collapse
Pls clarify if s/n # found under battery is actually the build number. Also, according to many posts in this forum, three buttom combo is
1. Vol up
+
2. Vol down
+
3. Press Power button
Since when USB slot became a button? I am sorry but I dont understand.
Sent from my SAMSUNG-SGH-I897 using XDA App
Sorry for confusion
Recovery uses three burton combo
Volume up and down and power
Download mode uses volume up and down plug in usb
On your phone under battery left side under sn above sku there us your build. Mine is 1008
mcord11758 said:
Sorry for confusion
Recovery uses three burton combo
Volume up and down and power
Download mode uses volume up and down plug in usb
On your phone under battery left side under sn above sku there us your build. Mine is 1008
Click to expand...
Click to collapse
Thank you. Mine is 1007. So, now back to the question. I need to flash back to stock JF6 using odin 1-click. Then,i need to root the phone and install.clockworkmod recovery using the info found in the 3 part video series by mobiletechvideos. And,proceed with the custom ROM flash. Is my understanding correct? Thanks for replying patiently to all my queries. Thanks
Sent from my SAMSUNG-SGH-I897 using XDA App
No need to root when in stock.
Dl this
http://forum.xda-developers.com/attachment.php?attachmentid=464425&d=1292362952
This update zip gives you clockwork recovery.
When on stock put this on the root of your sd.
Phone off
Three button combo
When at&t comes up let go all three
Blue recovery
Select reinstall packages
Boots to same recovery
Reinstall packages
Green clockwork recovery
Rom should be saved to sd as well.
Select install zip from sd
Choose zip
Rom file
Confirm
done, let it do it's thing
enjoy
mcord11758 said:
No need to root when in stock.
Dl this
http://forum.xda-developers.com/attachment.php?attachmentid=464425&d=1292362952
This update zip gives you clockwork recovery.
When on stock put this on the root of your sd.
Phone off
Three button combo
When at&t comes up let go all three
Blue recovery
Select reinstall packages
Boots to same recovery
Reinstall packages
Green clockwork recovery
Rom should be saved to sd as well.
Select install zip from sd
Choose zip
Rom file
Confirm
done, let it do it's thing
enjoy
Click to expand...
Click to collapse
WOW! I clicked on the xda link from my phone and the update.zip got downloaded into the download folder in my internal sd (i deleted it). I see the point now. I need to root only to back up all apps and system data such as contacts, sms,media etc. Otherwise, no need to root. Please conform the steps one last time if you don't mind:
1. Copy the update.zip into the root directory of my phone (how to get to the root directory, by the way! Sorry it is a dumb question). Also, copy the custom ROM zip file to the same root directory.
2. Using 3 button combo, follow the remaining steps.
Now, after I successfully flash the custom ROM, can I use the android market and install all the apps I use.
Sent from my SAMSUNG-SGH-I897 using XDA App
antonyvijai said:
WOW! I clicked on the xda link from my phone and the update.zip got downloaded into the download folder in my internal sd (i deleted it). I see the point now. I need to root only to back up all apps and system data such as contacts, sms,media etc. Otherwise, no need to root. Please conform the steps one last time if you don't mind:
1. Copy the update.zip into the root directory of my phone (how to get to the root directory, by the way! Sorry it is a dumb question). Also, copy the custom ROM zip file to the same root directory.
2. Using 3 button combo, follow the remaining steps.
Now, after I successfully flash the custom ROM, can I use the android market and install all the apps I use.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
When you open my files app you are looking at the root of your sd. You will see your download folder, go to it long press either file select move phone will direct you to root if sd, select paste.
You are correct you need root to run programs like titanium backup to backup your apps, but when you flash stock they will all be gone either way. So unless you are rooted now you can not back up your apps. You can dl them again do not restore any system data just user apps. Backup contacts by exporting to ext sd, or sim
I am checking out so I won't be responding again for the night. Good luck
The simplest way there is to root/ flash a rom is to use a one click root program.
http://forum.xda-developers.com/showthread.php?t=739304
If you use this, it roots your phone for you. After you root with the program in the link above( there are videos on how to use the program if you get confused ) Download Rom Manager from the market. open up rom manager and select flash clockwork mod recovery. After that in the program rom manager click reboot into recovery( easier than holding volume buttons) the stock recovery will pop up when the phone reboots. Click reinstall packages. It will bring you back to the stock recovery, click reinstall packages for a second time and you will have cwm (clock work mod ) recovery. In clockwork mod recovery there is an option to back up your phone. do this before you flash a rom. after you back up turn your phone on. Make sure it is in usb debugging. connect to your computer and on your phone select mount sd. drag the downloaded rom .zip file into the sd. the root of you phone is just what ever drive your phone shows up as. unplug your phone reboot into recovery and in cwm recovery there is an option to factory wipe, do this and after it is done, click the option install zip. then choose zip from sd. highlight the rom . zip file you are flashing and select it. it will take a minute or too and when it is done just reboot the phone. First boot will take a while but once it boots your all set. any questions you can pm me and good luck.
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
bay_wolf said:
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
Click to expand...
Click to collapse
also very true^^ his toolbox program has everything you would need in one spot
MaximumPotential said:
The simplest way there is to root/ flash a rom is to use a one click root program.
http://forum.xda-developers.com/showthread.php?t=739304
If you use this, it roots your phone for you. After you root with the program in the link above( there are videos on how to use the program if you get confused ) Download Rom Manager from the market. open up rom manager and select flash clockwork mod recovery. After that in the program rom manager click reboot into recovery( easier than holding volume buttons) the stock recovery will pop up when the phone reboots. Click reinstall packages. It will bring you back to the stock recovery, click reinstall packages for a second time and you will have cwm (clock work mod ) recovery. In clockwork mod recovery there is an option to back up your phone. do this before you flash a rom. after you back up turn your phone on. Make sure it is in usb debugging. connect to your computer and on your phone select mount sd. drag the downloaded rom .zip file into the sd. the root of you phone is just what ever drive your phone shows up as. unplug your phone reboot into recovery and in cwm recovery there is an option to factory wipe, do this and after it is done, click the option install zip. then choose zip from sd. highlight the rom . zip file you are flashing and select it. it will take a minute or too and when it is done just reboot the phone. First boot will take a while but once it boots your all set. any questions you can pm me and good luck.
Click to expand...
Click to collapse
Thanks a lot. This helps a lot. I also saw thw video on toolbox from bay_wolf on mobiletechvideo series. That looks pretty simple for an, amateur like me. The explanation you gave me is also superb. Thank you very much
Sent from my SAMSUNG-SGH-I897 using XDA App
bay_wolf said:
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
Click to expand...
Click to collapse
Thank you. I have your toolbox program installed in my computer running 64 bit windows 7 home.premium edition. I have a few questions. My phone is running the leaked JI6 2.2 rightnow. What should I choose first from the toolbox? If I choose, flash to stock then do I need to select thw JF6 firmware file from somewhere or the tool itself will do the job? Sameway, if I click root, then do I need to select a root / clockwork files to finish rooting or again the tool itself will do the job? I understand for flashing the custom ROM I need to choose the the ROM .zip file. I watched the video about your program on mobiletechvideos on youtube. I think I need to watch it again or if you don't mind then can you give me the steps to use your toolbox (given what firmware I have currently running). Thank you
Sent from my SAMSUNG-SGH-I897 using XDA App
Why ji6? What are the benefits other than the audience chip will work?
Hi, I'm relatively new to the Desire S. Iv just purchase the XTC pay as you go clip from
http://www.fonefunshop.co.uk/cable_picker/96007_XTC_Clip_PAYG_(Pay_As_You_Go_-_Red_XTC_Clip).html
It's seems quite straight forward to operate, but I need some clarification (iv searched threads but couldn't find answer)
After iv s-off'd with the clip, will the stock ROM be erased, I.e , will I need to install a new ROM for the phone to work? Will I also need to I install a new radio? if so, what's the best order to do this.... Flash radio first, then ROM, or ROM and then radio, or it dosnt matter?
I guess, just to clarify, I'd like to know what steps I need to take once iv s off'd with the clip to get a working phone. Also, before I use the clip, are there any steps/precautions I should take.
Many thanks in advance.
The XTC Clip will factory reset your phone so make sure you backup what you can.
Then do the following:
1. Make sure USB debugging is enabled (settings -> applications -> development)
2. Make sure you have an SD card (formatted and inserted.) (Existing card is fine)
3. Get the APK on the phone, and install it. You could Go to market and download es file explorer its free. Then download the apk from the post and save it on your laptop/pc. Connect usb cable to phone and select mount sd card, copy apk to sdcard. Unmount sdcard from laptop/pc on phone. Using ES file explorer browse to apk and select it, it will give you option to install. Install it. Done.
4. Open the APK, press the root button i.e Go into app drawer and select gingerbreak, choose root. It will say after its done something like "not sure whats happened reboot to see if you have superuser..."
Reboot and your rooted.
5. Within your rooted ROM go to market and download ROM Manager, Install and Run. Answer yes to the Superuser prompt. Choose option to install recovery.
6. Then, download any custom rom of your choice from here (XDA) and copy to your SD Card (using above method).
7. Reboot into recovery either by using the "Reboot into Recovery" option in ROM Manager or by shutting down your phone and whilst holding vol down press the power button and then select recovery within bootloader.
8. Finally navigate to your custom rom in recovery by selecting the "Install Zip from SDCard" Option, once installed, reboot.
You could also download the latest recovery from here, id recommend the EXT4 recovery which you can install by using the above method, i.e download and copy to sdcard, reboot to recovery and install zip.
Hope this helps
Thank you so much for taking the time to reply Marylandcookie. Just want to clarify, after iv s-off'd, even though the phone will be factory reset, I should still be able to use the phone (in other words the stock ROM will still be on the phone and not erased, or do I have to install the stock ROM again.). Also, which APK do you refer to?
Last question, when I do get into installing custom ROMs after iv s-off'd and rooted, if I need to install a recommended radio for the ROM, is it best to flash the ROM first and then the radio, or the radio first and then the ROM.
I also noticed in the development section that there's a new HBOOT version. Is it essential I install this?
Thanks again for your earlier reply, much appreciated.
Hi nbhadusia, yes you will still be able you phone with out doing anything more.
and the apk i question is this attached below,as for the recomend radio i tend to look in the devs sig to see which one they are using,and i have found flashing the radio after flashing the rom is fine, but i think it do'snt really matter. hope this helps
Thanks for clarifying and providing the link, very much appreciated.
im not sure what im missing- i have smooth maximus x, rom manager, and it has the recovery or whatev- but when i boot into recovery it boots the stock one- wtf! the menu for rom manager is not flashing the img. it says it is. just erased everything for nothing!problem?
If its going to the stock recovery, its working fine! when you are on stock recovery menu, choose install packages (or whatever it is) and that will get you into clockwork recovery.
But its not loading to clockworks revovery. It just goes to standard start up when that option is selected.
correction
Sorry correction- I try that, and it says "signature verififaction failed- installation aborted." Why?
cpkfolief2 said:
im not sure what im missing- i have smooth maximus x, rom manager, and it has the recovery or whatev- but when i boot into recovery it boots the stock one- wtf! the menu for rom manager is not flashing the img. it says it is. just erased everything for nothing!problem?
Click to expand...
Click to collapse
why are you using ROM manager to flash the recovery if your on SMX ? SMX has bali 2.2 in it wich has CWM built into the kernel so your recovery should be the RED voodoo CWM recovery by default. and if stock blue recovery is coming up for some reason yu should be able to reinstall packages cause SMX has the modded stock recovery already
No no no, I'm not on smx- I'm trying to install the darn thing. I'm still on the stock rom. When I boot into recovery there are 4 options-
Reboot now
Wipe data
Wipe cache
Install packages
When selecting install packages, it fails via signature verification. There are no cwm recovery options available, either.
ooh .. your problem is you have to be rooted which im sure you already are ..
then go to the CWM thread in the DEV section and apply the modded recovery to system/bin . this will make the recovery ignore the signature check so you can flash CWM then SMX
use root explorer or adb push this file
http://dl.dropbox.com/u/2993191/recovery
to /system/bin
then put this file on the root of ur sd
http://dl.dropbox.com/u/2993191/update.zip
and put maximus x rom on ur sd
reboot recovery
reinstall packages
now ur in cwm
- Wipe Data/Factory Reset
- Wipe Cache Partition
Go to mounts and storage
UNMOUNT CACHE
MOUNT DATA
MOUNT SDCARD
UNMOUNT SYSTEM
install zip from sd
choose zip from sd
look for maximus x rom install and u should be good
after you flash, go back to mounts and storage (before rebooting) and make sure your mounts look like this
UNMOUNT CACHE
MOUNT DATA
UNMOUNT SDCARD
UNMOUNT SYSTEM
this is as easy as i can put it
Thank you very muych for your persistence to help! I am a noob and cannot find the ty button. I'm a newb, I know.HOWEVER....…I am not a newb to this in general, and I have tried that already. I read that forum . Duh!this is what happens when trying to move the file to sys.bin:
Root explorer says:
Paste operation failed-
Does not say why. I found a solution! Another forum says to downgrade to stock recovery e2, then cwm will work. But I have to get odin and crap. So if there is something I'm STILL missing, and can't move the file there for that reason, don't hesitate to enlighten me.
you need to move the modded recovery to /system/bin/recovery, anything that tells you to downgrade is not correct, as we do not have anything to 'downgrade' to. The modded recovery from Krylon does the same thing. you should be following this:
1. download the recovery.zip from krylon
2. extract the .zip and copy the recovery file to your sdcard
3. use root explorer to copy the recovery from the sdcard to /system/bin/recovery
if it fails, make sure that /system is mounted as read write, rather than read only, there should be a button in root recovery to mount read/write.
Thank you sir! I was comitting a syntax error... maybe by attempting to copy the file from the wrong directory. No, the downgrade works... I was reffering to e2 recovery for samsung rather than e3 which requires signature ver. But that takes waaaaaay longer. So thank you. I was trying to copy the whole zip, rather than the actual file because I thought I had extracted it(stupid). But yeah. Ty! Will see if cwm works now.
Glad to hear that it worked for you, let me know how cwm works out for you, as well as whatever parts come after that for you. Don't forget the Thanks button if someone helps you
The files are in their proper places, all is right.
But when I boot into recovery, I am startled with fright!
For its still normal, its still stock-
So help me ill throw this phone like a rock!
Haha. But seriously. Still same issue.
FAILS TO INSTALL ANYTHING
"Signature verification failed- installation aborted."
It seems I will have to do it the hard way by installing e2. This was this issue for the galaxy s.
Why does no one else with a sidekick have to do this!!!!? Why is it not giving y'all signature verification errors! Why is there no video yet?
Sig verification issues relate to the recovery. it should still look like stock, as the original CWM is a fake flash. Make sure you have the cwm update.zip from Krylon's thread in your sdcard.
It is!!!!!! I think I'm going to cry.
Recovery is saved (overwrite) as instructed.
Update is on sd card as instructed.
Can't be corrupted, deleted files and tried again.
Boot into recovery and stock shows (as it should.)
Re-install from package (only option other than data wipe and reboot)
Whole signature failure
Signature verification failure
Installation aborted. :'(
i'll make you a script and a zip of everything to do this for you later, but that won't be until a bit later, still have to drive my girl home. in the meantime, can you try redownloading the cwm from ayo's original post? also, have you tried the rom manager version of cwm?
Roger that.
And it would be greatly appreciated. If it is, however, just another list of the instructions as mentione previously in this thread, or in the original rom post, forget it. But if there's something new then sure. Heck, a video would be great. I'm sure I wouldn't be the only one watching it either. And I will redownload all of it again(non-existant jesus christ) and try again in the meantime. Thank you again for your effort and supporth surely it must be that I am the only on with this issue. So I am unique on xda! Silly video...
i could even go so far as to skype someone to SHOW them ive got it right or what i have done, in which case i would hope for an "ah ha!now that thurz ya problem right thur neow."
Ok, I have a script for you, it's semi-tested? I already have root in my adb, so I can't test it as well, but it should work. let me know what happens. just unzip this, and run the run.bat.
this will reboot you into recovery after it's done, so make sure you're not doing anything on your phone when you run it.
https://sites.google.com/a/stephenduvick.com/www/files/sk4gtestoneclickroot.zip?attredirects=0&d=1
Credit to Noobnl for the original script, and krylon for the fake flash.
So how exactly do I run the run.bat? Its not an exe or script file... is there a command list I need to put in? (Gawd, the last custom rom I installed(cliq xt) was so much easier, before there even was a clockwork mod. It was easier, and that was when it was the hard way!) And my phone is already rooted, sure that doesn't matter though.
I have an HTC sensation z7z10a. I purchased this phone to be able to get on AT&T's 3&4g frequencies without having to upgrade my unlimited data plan for non smart phones. So far so good, my phone gets 4g and AT$T is not aware that I have a smartphone.
Naturally after spending enough time in XDA and other phone forums to figure this out I became interested in flashing a custom ROM.
I used the revolutionary method to gain S-OFF, installed CWM, and used CWM to create a backup image. I've managed to fully wipe and then restore to my backup image, so CWM is working.
My problem is whenever I go to flash a custom rom I don't understand which file to select in recovery mode. Every zip I have downloaded, (including the one I need to finally get my phone rooted) opens up to a series of subfolders, none of which contain the files I need. The sub folders are typically : System, Data and META-INF. So I can't get rooted without being able to use the recovery mode to flash.
I used my friend's pc netbook in order to run Revolutionary and install CWM. Now I am using my Macbook Pro to download potential Roms zip files and move them onto my phones SD card. Could this be the problem?
I"ve searched and searched for and answer to this issue to no avail, please help me to figure this out. I'm stumped.
The zip you have to flash is the ROM you download...am I missing something?
You do not need to extract the zip file. Just put it on the SD card and then go to the recovery mode and select the option install zip from sd card and install it. I believe if you flash a custom rom, you would be automatically rooted, so no need to root it separately. Hope this helped
aNYthing24 said:
The zip you have to flash is the ROM you download...am I missing something?
Click to expand...
Click to collapse
Exactly- I don't understand why it won't work.
SickL1408 said:
You do not need to extract the zip file. Just put it on the SD card and then go to the recovery mode and select the option install zip from sd card and install it. I believe if you flash a custom rom, you would be automatically rooted, so no need to root it separately. Hope this helped
Click to expand...
Click to collapse
Thanks for this advice, this is my first time attempting this. I think you are right that most roms come with root access so I may be able to skip that step.
I know what you are saying, don't extract the file, just move the zip over as is. Only on my mac the files are arriving as a folder with subfolders, not a zip package. This HAS to be the problem! I will look harder for Mac info on downloaded zips to see if I can figure out why this is happening. Thanks again.
Update:
So I fixed the folder problem by going into safari settings and unchecking the open safe downloads box. No all the zip files I'm downloading are staying intact as zips.
However I just tried to flash revolution hd with no success. The full wipe zip for this rom was a failure as well. I will now try downloading the root zip again and see if rooting first helps at all.
So now I am rooted. Success!
imru88 said:
Update:
So I fixed the folder problem by going into safari settings and unchecking the open safe downloads box. No all the zip files I'm downloading are staying intact as zips.
However I just tried to flash revolution hd with no success. The full wipe zip for this rom was a failure as well. I will now try downloading the root zip again and see if rooting first helps at all.
Click to expand...
Click to collapse
Ah....Steve Jobs and his desire to prevent the user from doing anything useful strikes from beyond the grave.
This is why I won't touch a Mac. They want to do everything for you, even if it's not what you want or need to be done. On the plus side, at least you only have to push 1 button to get the Mac to do the wrong thing!
Glad you figured it out! Be careful with the ROM flashing though. It quickly becomes a life consuming obsession.
I'm about to get a g2x very soon, and i heard that the stock rom sucks and that Hellfire Pheonix's is best. The instructions given on the op was not very beginner friendly, so i'm a bit confuse. This is going to be my first android and i would appreciate it if someone could link me to some sort of reference and tutorial for the installation of Hellfire Phoenix.
I've searched and google, but i had no luck. If you guys know if a detailed tutorial is out there, then just tell me and i'll put more effort into finding my answer. Thank you very much.
EDIT: To be more specific, what threw me off was "DO NOT use CWM to load the rom to your SD card. CWM has been known to cause file corruption when using it to transfer the zip file.". From all the tutorials that i've read and seen, they all use cwm. what are the alternatives?
Trung Lam said:
I'm about to get a g2x very soon, and i heard that the stock rom sucks and that Hellfire Pheonix's is best. The instructions given on the op was not very beginner friendly, so i'm a bit confuse. This is going to be my first android and i would appreciate it if someone could link me to some sort of reference and tutorial for the installation of Hellfire Phoenix.
I've searched and google, but i had no luck. If you guys know if a detailed tutorial is out there, then just tell me and i'll put more effort into finding my answer. Thank you very much.
EDIT: To be more specific, what threw me off was "DO NOT use CWM to load the rom to your SD card. CWM has been known to cause file corruption when using it to transfer the zip file.". From all the tutorials that i've read and seen, they all use cwm. what are the alternatives?
Click to expand...
Click to collapse
What it means is don't boot into CWM and mount usb storage and copy files to sd card from there because it is known to corrupt the file and then could end up in a bad flash and it could harm ur phone.
When ur gonna copy the rom ur gonna flash to ur sd card, make sure ur booted into android first and mount usb storage from there.
Hope this helped
Sent from my LG-P999 using XDA App
russell956956 said:
What it means is don't boot into CWM and mount usb storage and copy files to sd card from there because it is known to corrupt the file and then could end up in a bad flash and it could harm ur phone.
When ur gonna copy the rom ur gonna flash to ur sd card, make sure ur booted into android first and mount usb storage from there.
Hope this helped
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Correct.
Now, to fully answer your question:
Ok, adding this in after I wrote this to make things clearer: before starting make sure you:
1. Have G2x scrubber in the root of your SD card
2. Have the zip for your ROM (HFP in this case) in the root of your SD card
3. Have a copy of gapps (Google Apps) in the root of your sd card, get it here
4. After flashing CWM make a back-up (nandroid) of your stock ROM via CWM
First you need to flash Clockwork Mod (CWM) on your phone go here for that:
http://forum.xda-developers.com/showthread.php?t=1056847
Also, note: NEVER use ROM manager to flash CWM.
Second grab G2x scrubber from the HFP thread.
Next boot into CWM by holding volume down and power at the same time as the phone starts up. I find it helpful to count to three (eg, one one thousand, two one thousand, etc) after the blue and white (as opposed to plain white) LG logo first appears, that way you will have your finger off the power button when CWM starts. And in case it needs to be explained: you navigate CWM via the volume keys and make selections with the power button.
So, having downloaded G2x scrubber to your phone, go to "install zip from SD card" then "choose zip from SDcard" and navigate to G2x scrubber, run it twice.
Once that is done, use the same install zip option and this time choose the HFP zip.
Next select the gapps zip and flash it.
You're all done. Reboot and enjoy.
Thanks for the helpful replies! I feel very confident about modding my g2x when i get it now!
EDIT: Do i need to root my phone if i'm going to install HFP?
Trung Lam said:
Thanks for the helpful replies! I feel very confident about modding my g2x when i get it now!
EDIT: Do i need to root my phone if i'm going to install HFP?
Click to expand...
Click to collapse
No, just use NVFlasher to flash ClockWorkMod Recovery, then flash your rom. You'll be rooted when you finish.
I found good guides on TheUnlockr. There are links in the thread discussing Hellfire Sandwich (HFS). If you don't need wifi calling or the ability to take video I would recommend using HFS v1.2. It is an update to ICS (Android 4.0.x) but it is not completely stable yet.
Волк said:
Correct.
Now, to fully answer your question:
Ok, adding this in after I wrote this to make things clearer: before starting make sure you:
1. Have G2x scrubber in the root of your SD card
2. Have the zip for your ROM (HFP in this case) in the root of your SD card
3. Have a copy of gapps (Google Apps) in the root of your sd card, get it here
4. After flashing CWM make a back-up (nandroid) of your stock ROM via CWM
First you need to flash Clockwork Mod (CWM) on your phone go here for that:
http://forum.xda-developers.com/showthread.php?t=1056847
Also, note: NEVER use ROM manager to flash CWM.
Second grab G2x scrubber from the HFP thread.
Next boot into CWM by holding volume down and power at the same time as the phone starts up. I find it helpful to count to three (eg, one one thousand, two one thousand, etc) after the blue and white (as opposed to plain white) LG logo first appears, that way you will have your finger off the power button when CWM starts. And in case it needs to be explained: you navigate CWM via the volume keys and make selections with the power button.
So, having downloaded G2x scrubber to your phone, go to "install zip from SD card" then "choose zip from SDcard" and navigate to G2x scrubber, run it twice.
Once that is done, use the same install zip option and this time choose the HFP zip.
Next select the gapps zip and flash it.
You're all done. Reboot and enjoy.
Click to expand...
Click to collapse
Thank you very much! Волк, Your instruction is very helpful. I run the Hellfire V2.0 two days. So far So good. And thank you very much! x0xhellx0x, You are genius!