im not sure what im missing- i have smooth maximus x, rom manager, and it has the recovery or whatev- but when i boot into recovery it boots the stock one- wtf! the menu for rom manager is not flashing the img. it says it is. just erased everything for nothing!problem?
If its going to the stock recovery, its working fine! when you are on stock recovery menu, choose install packages (or whatever it is) and that will get you into clockwork recovery.
But its not loading to clockworks revovery. It just goes to standard start up when that option is selected.
correction
Sorry correction- I try that, and it says "signature verififaction failed- installation aborted." Why?
cpkfolief2 said:
im not sure what im missing- i have smooth maximus x, rom manager, and it has the recovery or whatev- but when i boot into recovery it boots the stock one- wtf! the menu for rom manager is not flashing the img. it says it is. just erased everything for nothing!problem?
Click to expand...
Click to collapse
why are you using ROM manager to flash the recovery if your on SMX ? SMX has bali 2.2 in it wich has CWM built into the kernel so your recovery should be the RED voodoo CWM recovery by default. and if stock blue recovery is coming up for some reason yu should be able to reinstall packages cause SMX has the modded stock recovery already
No no no, I'm not on smx- I'm trying to install the darn thing. I'm still on the stock rom. When I boot into recovery there are 4 options-
Reboot now
Wipe data
Wipe cache
Install packages
When selecting install packages, it fails via signature verification. There are no cwm recovery options available, either.
ooh .. your problem is you have to be rooted which im sure you already are ..
then go to the CWM thread in the DEV section and apply the modded recovery to system/bin . this will make the recovery ignore the signature check so you can flash CWM then SMX
use root explorer or adb push this file
http://dl.dropbox.com/u/2993191/recovery
to /system/bin
then put this file on the root of ur sd
http://dl.dropbox.com/u/2993191/update.zip
and put maximus x rom on ur sd
reboot recovery
reinstall packages
now ur in cwm
- Wipe Data/Factory Reset
- Wipe Cache Partition
Go to mounts and storage
UNMOUNT CACHE
MOUNT DATA
MOUNT SDCARD
UNMOUNT SYSTEM
install zip from sd
choose zip from sd
look for maximus x rom install and u should be good
after you flash, go back to mounts and storage (before rebooting) and make sure your mounts look like this
UNMOUNT CACHE
MOUNT DATA
UNMOUNT SDCARD
UNMOUNT SYSTEM
this is as easy as i can put it
Thank you very muych for your persistence to help! I am a noob and cannot find the ty button. I'm a newb, I know.HOWEVER....…I am not a newb to this in general, and I have tried that already. I read that forum . Duh!this is what happens when trying to move the file to sys.bin:
Root explorer says:
Paste operation failed-
Does not say why. I found a solution! Another forum says to downgrade to stock recovery e2, then cwm will work. But I have to get odin and crap. So if there is something I'm STILL missing, and can't move the file there for that reason, don't hesitate to enlighten me.
you need to move the modded recovery to /system/bin/recovery, anything that tells you to downgrade is not correct, as we do not have anything to 'downgrade' to. The modded recovery from Krylon does the same thing. you should be following this:
1. download the recovery.zip from krylon
2. extract the .zip and copy the recovery file to your sdcard
3. use root explorer to copy the recovery from the sdcard to /system/bin/recovery
if it fails, make sure that /system is mounted as read write, rather than read only, there should be a button in root recovery to mount read/write.
Thank you sir! I was comitting a syntax error... maybe by attempting to copy the file from the wrong directory. No, the downgrade works... I was reffering to e2 recovery for samsung rather than e3 which requires signature ver. But that takes waaaaaay longer. So thank you. I was trying to copy the whole zip, rather than the actual file because I thought I had extracted it(stupid). But yeah. Ty! Will see if cwm works now.
Glad to hear that it worked for you, let me know how cwm works out for you, as well as whatever parts come after that for you. Don't forget the Thanks button if someone helps you
The files are in their proper places, all is right.
But when I boot into recovery, I am startled with fright!
For its still normal, its still stock-
So help me ill throw this phone like a rock!
Haha. But seriously. Still same issue.
FAILS TO INSTALL ANYTHING
"Signature verification failed- installation aborted."
It seems I will have to do it the hard way by installing e2. This was this issue for the galaxy s.
Why does no one else with a sidekick have to do this!!!!? Why is it not giving y'all signature verification errors! Why is there no video yet?
Sig verification issues relate to the recovery. it should still look like stock, as the original CWM is a fake flash. Make sure you have the cwm update.zip from Krylon's thread in your sdcard.
It is!!!!!! I think I'm going to cry.
Recovery is saved (overwrite) as instructed.
Update is on sd card as instructed.
Can't be corrupted, deleted files and tried again.
Boot into recovery and stock shows (as it should.)
Re-install from package (only option other than data wipe and reboot)
Whole signature failure
Signature verification failure
Installation aborted. :'(
i'll make you a script and a zip of everything to do this for you later, but that won't be until a bit later, still have to drive my girl home. in the meantime, can you try redownloading the cwm from ayo's original post? also, have you tried the rom manager version of cwm?
Roger that.
And it would be greatly appreciated. If it is, however, just another list of the instructions as mentione previously in this thread, or in the original rom post, forget it. But if there's something new then sure. Heck, a video would be great. I'm sure I wouldn't be the only one watching it either. And I will redownload all of it again(non-existant jesus christ) and try again in the meantime. Thank you again for your effort and supporth surely it must be that I am the only on with this issue. So I am unique on xda! Silly video...
i could even go so far as to skype someone to SHOW them ive got it right or what i have done, in which case i would hope for an "ah ha!now that thurz ya problem right thur neow."
Ok, I have a script for you, it's semi-tested? I already have root in my adb, so I can't test it as well, but it should work. let me know what happens. just unzip this, and run the run.bat.
this will reboot you into recovery after it's done, so make sure you're not doing anything on your phone when you run it.
https://sites.google.com/a/stephenduvick.com/www/files/sk4gtestoneclickroot.zip?attredirects=0&d=1
Credit to Noobnl for the original script, and krylon for the fake flash.
So how exactly do I run the run.bat? Its not an exe or script file... is there a command list I need to put in? (Gawd, the last custom rom I installed(cliq xt) was so much easier, before there even was a clockwork mod. It was easier, and that was when it was the hard way!) And my phone is already rooted, sure that doesn't matter though.
Related
I always get an error saying E:/ cannot open file /cache/update.zip (bad), no matter what ROM it is. theres not even an update.zip anywhere on my phone or sd card, and i cant manage to get to this so called /cache. please help.
Mrblackroot said:
I always get an error saying E:/ cannot open file /cache/update.zip (bad), no matter what ROM it is. theres not even an update.zip anywhere on my phone or sd card, and i cant manage to get to this so called /cache. please help.
Click to expand...
Click to collapse
Since this isn't development related, you should post it in the general board.
You didn't install clockwork correctly, or you didn't follow all of the directions when you did install it. Did you follow the instructions and press "flash clockworkmod recovery", which downloads the latest version and puts the update file on your phone?
i did, i have the latest recovery version. and i uninstalled and then reinstalled it before trying again.
Wrong section and you have to use the option that says choose zip from sdcard not the one that says install update.zip
Sent from my GT-I9000 using XDA App
Mrblackroot said:
I always get an error saying E:/ cannot open file /cache/update.zip (bad), no matter what ROM it is. theres not even an update.zip anywhere on my phone or sd card, and i cant manage to get to this so called /cache. please help.
Click to expand...
Click to collapse
If there is no update.zip then in Rom Manager you need to select the first option that reads Flash ClockworkMod Recovery. That will bring up a screen asking which phone. If you are installing an i9000 rom choose i9000. If not choose the Captivate. That will install an update.zip on your sd card
Then select install rom from sd card and it will probably take you to stock recovery so select install packages (or whatever the 2nd choice is). That will get you into CWM. Install whatever rom from there
First off, this is the right section, as this thread is *somewhat* development related.
I had a similar problem a while back, and never did figure out exactly what was causing it. Might have been because I often just use the Clockwork update.zip (bootstrapped from stock recovery) to flash ROMs without always "installing" it from Android itself. Though, even when I got that error, I could still flash new ROMs without problems.
Either way, flash to stock w/ oneclick, then do a master clear, fixes the problem right up.
If there is no update.zip then in Rom Manager you need to select the first option that reads Flash ClockworkMod Recovery. That will bring up a screen asking which phone. If you are installing an i9000 rom choose i9000. If not choose the Captivate. That will install an update.zip on your sd card
Then select install rom from sd card and it will probably take you to stock recovery so select install packages (or whatever the 2nd choice is). That will get you into CWM. Install whatever rom from there
Click to expand...
Click to collapse
Thanks a lot, this worked. is there anyway i can just move this thread to the general forum, or would that require a moderator?
Shammyh said:
First off, this is the right section, as this thread is *somewhat* development related.
I had a similar problem a while back, and never did figure out exactly what was causing it. Might have been because I often just use the Clockwork update.zip (bootstrapped from stock recovery) to flash ROMs without always "installing" it from Android itself. Though, even when I got that error, I could still flash new ROMs without problems.
Either way, flash to stock w/ oneclick, then do a master clear, fixes the problem right up.
Click to expand...
Click to collapse
Mmmm.. last time I checked the development forums was for developers to start topics on things they have developed or are working on... not for Q & A. There's another board for that..
I get this error all the time.
Open ROM Manager, hit Menu, hit Clear Download Cache.
Then hit Flash Clockwork Mod Recovery, choose Captivate, and let it go. Then hit Reboot Into Recovery and it should work fine. You may have to select Reinstall Packages if you end up in the stock 2e recovery.
Hey fellow G2x's. I rooted my phone today and attempted to install CM7 nightly #56. FIrst of all...
I tried just downloading the rom via rom manaer, clicked wipe data and wipe cache. When I did it tried to install and asid "Could not open cm7nightlyetc..." And then it proceeded to reboot itself as if it was a new phone.
I then tried to do it via recovery. First whenever I click install from zip card then choose zip from sdcard, the only file I can see is LOST.DIR/ even though I deliberately moved the rom into the sdcard/. I was met with the same problem.
During both the encounters. a triangle with an ! appears, with a little android dude next to it. WHat does this mean? What do I need to do to fix this?
GManLynx said:
Hey fellow G2x's. I rooted my phone today and attempted to install CM7 nightly #56. FIrst of all...
I tried just downloading the rom via rom manaer, clicked wipe data and wipe cache. When I did it tried to install and asid "Could not open cm7nightlyetc..." And then it proceeded to reboot itself as if it was a new phone.
I then tried to do it via recovery. First whenever I click install from zip card then choose zip from sdcard, the only file I can see is LOST.DIR/ even though I deliberately moved the rom into the sdcard/. I was met with the same problem.
During both the encounters. a triangle with an ! appears, with a little android dude next to it. WHat does this mean? What do I need to do to fix this?
Click to expand...
Click to collapse
First rule of G2X/Tegra2 club... don't use Rom Manager. Use CWR for all your flashing needs. *Install CWR via NVFlash only.
Alright, I'm sorry but I came the G2.... And I was wondering what NVFlash is? I'm gonna google it, but it will be nice if you answer it too.
Setting up NVFlash
Here's the guide to setting up NVFlash. It's a moderately challenging process, but it's seamless after getting it put on your G2x. This is the only way to get CWM without issues. http://forum.xda-developers.com/showthread.php?t=1054492
Oh, and remember to go into C: on your computer and make the folder "G2x". This is where you put the files from NVFlash.
darbear5610 said:
Here's the guide to setting up NVFlash. It's a moderately challenging process, but it's seamless after getting it put on your G2x. This is the only way to get CWM without issues. http://forum.xda-developers.com/showthread.php?t=1054492
Oh, and remember to go into C: on your computer and make the folder "G2x". This is where you put the files from NVFlash.
Click to expand...
Click to collapse
yup and when u get ready for commands u can copy and paste them
techboydino said:
First rule of G2X/Tegra2 club... don't use Rom Manager. Use CWR for all your flashing needs. *Install CWR via NVFlash only.
Click to expand...
Click to collapse
First - the above is the truth - learned the hard way by many.
From the "triangle" comment, I would have thought you were not able to get into recovery anymore, but you said you had tried flashing in recovery - are you still able to get into recovery? Also, when you said you moved the file to the SD - internal or external?
You could re-download the ROM on you computer and/or move the one you downloaded when in USB connect mode if you can connect through USB. and then try flashing it again.
Otherwise - did you do an nandroid back-up first (add that to the G2X Club rules). If so, and you can get into recovery, you can restore it through recovery. If not, you are truly back to square one (except for rooted).
At some point, you need to NVflash a real recovery. The one-click method in the Dev section is the easier way to go. If you can't get into recovery (you only see the triangle and it only does a factory reset), then you HAVE to start there.
Yeah I am still able to get to recovery mode. And external sdcard.
I think i'm just gonna go staright to the NVFlash way. I have a history class today so I have a hour and a half to burn.
And thanks guys for all the inputs.
I'm loving my G2x so far. So fast and sleek
All you need to do is NVFlash once, just so you can get into recovery on a bootloop (Power+VolDown)
After you install NVFlash once, you can use RomManager all you want (I do).
Rom Manager will install a temp recovery initially, but it won't affect your permanent NVFlash recovery. So just do both. Rom Manager will work perfectly fine without doing a NVFlash, but an NVFlash just enables the option to get into recovery on a cold boot.
Every day, I launch Rom Manager and it will find the latest Nightly and download it plus Google Apps, prompts for Full Wipe, Backup, or Cache options, then it will reboot, flash the items, and reboot back into Android.
So, again, NVFlash just enables Power+VolDown to get into recovery but Rom Manager works great without it. You SHOULD do BOTH initially and just get it out of the way.
Alright thanks. I just installed via NVFlash and now I will try again to install CM7
player911 said:
All you need to do is NVFlash once, just so you can get into recovery on a bootloop (Power+VolDown)
After you install NVFlash once, you can use RomManager all you want (I do).
Rom Manager will install a temp recovery initially, but it won't affect your permanent NVFlash recovery. So just do both. Rom Manager will work perfectly fine without doing a NVFlash, but an NVFlash just enables the option to get into recovery on a cold boot.
Every day, I launch Rom Manager and it will find the latest Nightly and download it plus Google Apps, prompts for Full Wipe, Backup, or Cache options, then it will reboot, flash the items, and reboot back into Android.
So, again, NVFlash just enables Power+VolDown to get into recovery but Rom Manager works great without it. You SHOULD do BOTH initially and just get it out of the way.
Click to expand...
Click to collapse
Agree with all the above (I have and use both), except for making nandroids, which was not mentioned above. The only ones where I have had a check-sum issue with trying to restore are nandroids I did with ROM Manager. I would stick with doing them straight from recovery.
Others have had issues with flashing nightlies also, but I have not noticed that as I always head straight to recovery to flash.
Question - I had flashed real recoveries with ROM manager on MT4G - why the "false" recovery issue on G2X?
So player, once I have NVFLASH and CWM, I can download ROM manager to backup/restore/flash any ROM from the list without worrying about anything?
Hey, I installed the 4.0.0.3 and I still have the same problem. I can't see any roms I put on the SD card, and when I try to install it by naming it update.zip it gives me the same error. Any ideas?
OKay so here is what happens
Installing: /sdcard/update.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/update.zip
(No such file or directoy)
Installation aborted
THere is definately a file there. I just named it that cause it wont shop up when i choose zip from sd card.
I would redownload the zip file over the computer, happened to me before with a different rom, make sure it doesnt unzip. and then drag it to your SD card.
Okay I am perfomring that now, will edit with results.
My goodness... I think you fixed it for me. I feel like an idoit. I've been saving it to hte internal Sdcard i didn't even know that was possible.
Damnit... same problem.
Yay I got it. Thanks so much guys for all the help.
GManLynx said:
Hey, I installed the 4.0.0.3 and I still have the same problem. I can't see any roms I put on the SD card, and when I try to install it by naming it update.zip it gives me the same error. Any ideas?
OKay so here is what happens
Installing: /sdcard/update.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/update.zip
(No such file or directoy)
Installation aborted
THere is definately a file there. I just named it that cause it wont shop up when i choose zip from sd card.
Click to expand...
Click to collapse
The ROMs were probably going to the internal SD by default. Just move them with a file manager to the external SD (unless you set up recovery to use the internal SD).
Also, do not rename them update zip - leave the names as-is so you will know what your are dealing with if you have multiple ROMs .
Then you flash it as a zip file on SD card - not as "update.zip" - that would be for the OTA update - if we ever actually see one for the G2X!
Good job Gman
Different roms put the external SD card in different places.
By default Rom Manager is set to read/write to /sdcard/... not /sdcard/external_SD that is the norm with the stock(based) roms.
Once you have CM7 on there and everything setup under standard conditions, Rom Manager will work as it should.
Hi,
I checked through many threads to see if anyone had a similar problem but couldn't find anything unfortunately.
Background :
I was running a Lite'ning ROM on my Samsung Galaxy S2. You're probably familiar with this ROM, but for those who aren't it gets flashed with ODIN and comes rooted and pre-installed with CWM.
I forget which version of Lite'ning ROM it was, but I am fairly certain it was pre-1.5 as the bundled CWM was definitely version 3.x.x.x (later versions I found had 4.x.x.x and 5.x.x.x).
I wanted to try a version of GalnetMIUI for something a bit different and hadn't changed ROMs in quite some time, so I booted into CWM 3.x.x.x (maybe 3.0.0.2?) and did a backup to the internal SD. This came in at around 1.4 GB and comprised of 4 files :
cache.img
data.img
nandroid.md5
system.img
I copied these to my PC too, just in case they somehow got erased from my phone.
Once I'd done this, I then copied the new ROM .zip file (latest version of GalnetMIUI) to the root of the internal SD, booted the phone into CWM, wiped user data and Dalvik cache, then proceeded to install it.
The problem :
I can't get my apps or data back. I was under the false impression that my Google account was automatically backing this up for me, and would restore everything once logged in as it had in the past (factory resets etc.). So once this didn't happen, I tried using CWM to revert back to how things were before installing the new ROM but although the restore appears to work I end up with issues.
I've tried a number of different ROMs and they either get stuck in 'boot loops' or a black screen after running through the restore procedure. I've tried restoring just data via the 'Advanced' option but this doesn't help.
I was under the impression that I'd be able to fully restore the ROM backup if I needed to, and have the phone running exactly how it was prior to messing around. It would seem this is not the case.
In desperation I tried flashing every Lite'ning ROM from version 1.0 to 4.2, restoring my backup each time but as mentioned I always get boot issues.
Have I lost my data? I hope not, as I had 'To Do' lists and all sorts of things that would cause problems if they were not retrievable. I realise this is a lack of knowledge and foresight on my part. I'm thinking now that I should have run Titanium Backup prior to this, and not assumed that CWM was going to provide a complete solution.
Hope all this makes sense and if any of you have the time to read through and offer advice it would be greatly appreciated. I am currently running a very pretty and slick GalnetMIUI without any of my data!
Thanks in advance.
download cwm 2.5.x.x its better
[email protected] said:
download cwm 2.5.x.x its better
Click to expand...
Click to collapse
Thanks for that, I'll give it a go tonight after work. Am I right in thinking that if it doesn't work I can extract the individual files and insert them manually to get my app data back?
OK, so after hours of searching I'm still no wiser as to how to install CWM 2.5.1.2
I found a zip file that was apparently version 2.5.1.2 but when I tried to install it from inside CWM 5.0.2.6 (included with GalnetMIUI) it sometimes gives an error, sometimes it reboots CWM and sometimes it simply says it has successfully installed (it lies). No matter what it says or does, it doesn't seem to actually replace version 5.0.2.6 with the older one and every time I do the three-finger boot it loads up the latest version like nothing changed.
I'm just so lost. All I want to do is restore my old backup, get my data back and move on. Please someone help me before I go insane from all this research!
[EDIT] In case any more information is needed, my exact procedure for installing version 2.5.1.2 of CWM went like this :
Download 2.5.1.2 zip file
Copy zip file to root folder on internal SD
Boot into CWM 5.0.2.6
Select "install zip from sdcard"
Select "choose zip from sdcard"
Navigate to 2.5.1.2 zip file, select and confirm
Can anyone help me at all?
In particular I'd like to know how I can downgrade to CWM 2.5.1.2 or similar in order to give [email protected]'s suggestion a go.
Failing that, if anyone has any suggestions whatsoever about how I can get my backup data restored it would be greatly appreciated. After spending some time with MIUI - in particular the Galnet ICS build - I have nothing but praise, but I really have to get my data back!
You should be able to downgrade through ROM manager. Go to "All Clockwork Mod Recoveries" and just flash one that is not 5.x.x. Any backup not made with version 5 will not work with the new version So if you can flash one that is version 2, 3 or 4 you should be good to go. If that doesn't work you can fastboot flash it. There are guides on how to do that.
Wait.....did you mount /system before installing the CWM zip ?
Sent from my GT-S5830 using XDA App
Sorry for the delayed reply, for some reason I didn't get an email notification that my thread had been updated.
lowandbehold said:
You should be able to downgrade through ROM manager. Go to "All Clockwork Mod Recoveries" and just flash one that is not 5.x.x. Any backup not made with version 5 will not work with the new version So if you can flash one that is version 2, 3 or 4 you should be good to go. If that doesn't work you can fastboot flash it. There are guides on how to do that.
Click to expand...
Click to collapse
For some reason, when I select "All ClockworkMod Recoveries" the only two options are 4.0.1.4 and v4.0.1.4. I'll have to look into "fastboot" flashing as I've never heard of that.
By the way, if I boot into CWM via ROM Manager the version that loads is 4.0.1.5, but if I perform the three-button combo when switching my device on I get version 5.0.2.6.
EmoBoiix3 said:
Wait.....did you mount /system before installing the CWM zip ?
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
I didn't, is that something I should try?
Edit - Just tried this and at first it rebooted CWM and the version number hadn't changed. Doing this again yielded me the following error with no change in version number :
Code:
E:Error in /sdcard/CM V 2.5.1.2_update.zip
(Status 0)
Installation aborted.
I found out that I can extract the contents of my backed up .img files using unyaffs.exe.
Unless I'm doing something wrong, it would appear that my backup is corrupt somehow. When trying to extract data.img, it processes for a while and does bring back a lot of files but I also get the following :
Code:
read image file
: Bad file descriptor
read image file
: Bad file descriptor
data.img is around 1.2GB but the files I extract only amount to around 190MB.
It would appear that I don't have my contacts database in there which is annoying as for some reason there were quite a few that didn't get synced to Google's servers.
Hi:
Following gtg465x's instructions in http://forum.xda-developers.com/showthread.php?t=1107881, I updated my stock recovery to modded 3e recovery. However, continuing with the update for ClockworkMod Receovery, I see a failure.
Here's what I see when I try to "apply update from sdcard":
-- Install /sdcard ...
Finding update package ...
Opening update package ...
Verifying update package ...
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
It appears the 3e recovery I have isn't modded, and hence is still trying to verify the signature. I've tried downloading the (modded) 3e recovery a couple of times, just to make sure I'm getting the right one.
Interestingly, I don't have a file called recovery in /system/bin, but I do have one in / and one in /sbin. What gives?
I am on GINGERBREAD.UCKL2.
Any suggestions?
Use his video on youtube.
http://www.youtube.com/watch?v=PkMo8rBehHg
Edit: Sorry didn't see the end of your post. I always install cwm right away before I flash another rom.
Hi:
Tried exactly that. Unfortunately, didn't do the trick for me. I wonder if it's perhaps because of those extra recovery files in / and /sbin. Is it safe to delete them?
wiley_hacker said:
Hi:
Tried exactly that. Unfortunately, didn't do the trick for me. I wonder if it's perhaps because of those extra recovery files in / and /sbin. Is it safe to delete them?
Click to expand...
Click to collapse
Try my help page
edit:
wrong link previouly.
http://forum.xda-developers.com/showthread.php?t=1437548
just dl sgs kernel flasher if you're already on gb.
flash entropy's kernel to give you recovery
I do not know if it is safe to delete them. Only thing I would know to do is to go back to stock and install cwm to see if that works. Sorry that I'm not much help.
wiley_hacker said:
Hi:
Following gtg465x's instructions in http://forum.xda-developers.com/showthread.php?t=1107881, I updated my stock recovery to modded 3e recovery. However, continuing with the update for ClockworkMod Receovery, I see a failure.
Here's what I see when I try to "apply update from sdcard":
-- Install /sdcard ...
Finding update package ...
Opening update package ...
Verifying update package ...
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
It appears the 3e recovery I have isn't modded, and hence is still trying to verify the signature. I've tried downloading the (modded) 3e recovery a couple of times, just to make sure I'm getting the right one.
Interestingly, I don't have a file called recovery in /system/bin, but I do have one in / and one in /sbin. What gives?
I am on GINGERBREAD.UCKL2.
Any suggestions?
Click to expand...
Click to collapse
can't be done on gb, you're trying a froyo proceesure.
kl2 is even worse cuz its hard to root. you need a custom kernel. how did you getroot anyway?
If he still had root, sgs flasher will work.
If not, heimdall one click defuse kernel in dl mode?
Would odin entropy also give you recovery to flash other ROM?
qkster said:
If he still had root, sgs flasher will work.
If not, heimdall one click defuse kernel in dl mode?
Would odin entropy also give you recovery to flash other ROM?
Click to expand...
Click to collapse
yes that all would work. but defuse is froyo so it is temporary so a gb kernel in a cwm package must be on the sdcard first to flash the phone back to a bootable state. kernel flasher will backup the kernel on the phone and make it cwm flashable, but if you have kernel flasher there is no need for defuse. defuse oneclick is a means to an end on gb. it's only foe the purpose of getting cwm to flash something else.
I had this problem just a few minutes ago things how I did it... First use root explorer down load the mod 3e place it in the system folder in the bin ( I didn't see it with astro but root I did) I renamed the recover in there as recoveryold then place the new recovery in there. Now make sure the permission the same as the original.. Now once that done just back out and close root manager... Goto to rom manager go into reboot into recovery. Then once it reboots cycle down to were it says install repackage (or something like that). Choose that option you may have to do it a few times.. I did but it worked... So then you should have cwm?.. Hope that helps
Sent from my Xoom using xda premium
Oh sorry didn't see your own gb.. I did this on froyo.
nthknd said:
I had this problem just a few minutes ago things how I did it... First use root explorer down load the mod 3e place it in the system folder in the bin ( I didn't see it with astro but root I did) I renamed the recover in there as recoveryold then place the new recovery in there. Now make sure the permission the same as the original.. Now once that done just back out and close root manager... Goto to rom manager go into reboot into recovery. Then once it reboots cycle down to were it says install repackage (or something like that). Choose that option you may have to do it a few times.. I did but it worked... So then you should have cwm?.. Hope that helps
Sent from my Xoom using xda premium
Oh sorry didn't see your own gb.. I did this on froyo.
Click to expand...
Click to collapse
Did you extract the recovery from the .zip or renamed the .zip recovery.zip? i extracted the recovery from the zip and placed it in the system/bin and made sure the permissions were correct. Then in cwm i booted into recovery. then phone froze when i tried to do an android back up. And yes i have froyo 2.2.1
***update-DONT RENAME ZIP AND STICK IN SYSTEM\BIN YOU WILL SOFT BRICK YOUR PHONE... I FOUND OUT THE HARD WAY LOL
Sent from my SAMSUNG-SGH-I997 using XDA App
My phone is rooted (With Super One Click) and when tap the "boot into recovery" option in Rom Manager it just send me to the stock recovery (with Blue text and what not). I have flashed Rom Manager with my Sidekick 4g before I tried to boot into recover. Please, someone help me. The answer is probably right in my face, but my noobish eyes just cant see it. :crying:
Please don't bash me this is my first post. I made sure there wasnt any post like this before i started a new tread.
Don't use ROM Manager with Sidekick 4G as CWM doesn't work the same way. When you reboot you always go into Samsung recovery from where you gotta reinstall packages to 'fake flash' the CWM recovery. If it says permission denied, the recovery file wasn't pushed to /system properly. You gotta reinstall every single time .. till of course you install a custom ROM. I think most come with voodoo CWM which replaces stock recovery, allowing you to go into CWM directly when you go to Recovery.
Firstly you need root, which I'm assuming you already have. Then you have to move a custom recovery to your phone's /system to allow you to install unsigned packages. You can do this using root explorer (paid app, but its the most simple and easy way of doing it) or you can do it using other similar apps that give you R/W (read and write) access. You also need to have a custom recovery file, the update.zip which when you hit reinstall packages (given you pushed the custom recovery file to the phone's system) would bring up clockworkmod recovery.
Read the noob guide here -> link. Its REALLY good and gives you a step by step of how to root / get custom recovery and install custom ROM.
Go here -> link. For more in depth information about getting a custom recovery. And here -> link. for Krylon's recovery files (links on his thread aren't all working).
Edit: Looks like the links on Krylon's page aren't working .. if someone can give an alternative it would be great!
I'm thinking about ODIN my device and start over but this time following one of the guides provided. I got cwm working but now I get a long script of code with a error that saids that it can't mount this and stuff like that. Ill try to post a image to give you a little better look at my problem. And for some reason the cmw logo isn't coming up behind the orange text.
Sent from my SGH-T839 using xda app-developers app
Those guided really helped me out I spent ages reading up different things so when I finally went and did it, I didn't face any problems!
Important notes:
1. Root, obviously I personally didn't use the latest edition of SuperOneClick (at the time) on the website, but the file the dev posted on his XDA Thread.
2. Don't use ROM Manager or any other 'one click' kind of recovery for this phone. You need to download a custom recovery file and update file (links above, thanks Krylon) and go into CWM Recovery through the official Samsung Recovery through reinstalling the custom update file. This is the only way to access Orange CWM. Most custom ROMs come with the Red Voodoo CWM which is permanent in the sense that when you go into recovery, you should go into CWM (Red), instead of having to go through Samsung.
3. Orange CWM (and some say Red CWM as well) has some mounting issues. Always remember to check your mounts such that System, Data (well just to be safe, all of the items in the list) always say UNMOUNT. Basically when its mounted, means CWM has access to the partition. It says UNMOUNT because it is MOUNTED. I know thats a bit confusing, but think of it like this - there is a light switch that says ON so when you press it, turns the lights on but then the writing changes to OFF because you need to push the switch to turn it off. Erm .. hope that helps?! Lol.
4. Basically if your partitions are showing up as MOUNT, means you need to MOUNT them. Otherwise whatever changes you did won't apply! Instead of getting confused like I did, just make sure the screen says UNMOUNT SYSTEM and so forth for the rest of the items on the list.
5. Before installing a custom ROM, I always wiped x 3, before and after. Means after checking mounts, wipe data / dalvik, etc. 3 times. So for me, after checking mounts I would go to wipe date - yes - done 1; wipe data - yes - done 2; wipe data - yes - done 3. Followed by wipe dalvik and whatever else you want to wipe. Then I'd check mounts again (they usually get unmounted after a wipe .. well for me they always have anyway) before installing the ROM. Oh, sometimes I installed the ROM twice. Then I'd check mounts, wipe x 3, check mounts again before finally rebooting and letting it stand still for around 20 minutes or so. I don't really know if there is a logic or if doing it so many times makes a difference but I know some other people have done this and (other than wasting time) it doesn't really do any harm (someone correct me if I'm wrong) so why the hell not? I think the basic reasoning behind double / triple wiping and installing is to make sure that the changes are properly written as sometimes the system still retains old data.
6. Some people have SD card partitioning issues apparent. I can't remember why everyone went around partitioning in the first place (it must have been for some important reason, completely slipped my mind right now .. I personally did it to link my apps / data to SD card and save internal memory / space) but I personally used Gparted to partition my card on a computer (rather than CWM on the phone as I've heard people have issues with this) and never had a problem.
But I think thats it. I know there is a lot of information but its really worth having a look at the guide and other posts on that thread as that and the ROM thread (I personally use GOV 3.2) really had me prepare for any possible issue beforehand so I started off in a position where I could avoid them.
WTF_IsA_Android said:
I'm thinking about ODIN my device and start over but this time following one of the guides provided. I got cwm working but now I get a long script of code with a error that saids that it can't mount this and stuff like that. Ill try to post a image to give you a little better look at my problem. And for some reason the cmw logo isn't coming up behind the orange text.
Sent from my SGH-T839 using xda app-developers app
Click to expand...
Click to collapse
can someone update the sidekick 4g stuff everything is either dead or does not lead anywhere to download any of the required files, thanks.