Database Info

Rooting and Flashing a custom ROM

I flashed the leaked froyo firmware I897UCJI6 on my samsung captivate using odin 1-click method. I have a working 2.2 now. My phone is not rooted. I am planning to flash a custom ROM and try other custom ROMs out there in the market. I've gone through a three part video series by mobiletechvideos on how to root and flash a custom ROM (http://forum.xda-developers.com/showthread.php?t=884364). But, i still have a few questions.
1. For rooting, do i need to flash the phone back to the stock JF6?
2. In the xda link given above, i am fine until step #4. Step #5 is a little bit confusing to me. After i copy the root file to the root directory in the internal sd card on my phone, i rename it to update.zip. Also, i copy the clockworkrecovery to the root directory in the internal sd card in the phone and rename it to update.zip. Now, after i am doing with rooting and clockworkrecovery, i have to proceed further to flash the custom ROM. Now, the steps mentioned in the xda forum does not say anything about moving the custom ROM file to the root directory in the internal sd card on the phone. My question is: Do i need to copy the custom ROM zip file into the root directory of the phone? Do i need to rename the custome ROM file to update.zip as well?
Someone please help.

Yes rom goes on sd, no do not rename
If you are on ji6 you will not be able to install clockwork because of 3e recovery. Two option, flash back to stock using
http://www.fileserve.com/file/emnCn2j
One click odin, provided you are at&t and build number is 1009 and lower located under battery
2 look for modded 3e recovery in. development for captivate posted by exist

mcord11758 said:
Yes rom goes on sd, no do not rename
If you are on ji6 you will not be able to install clockwork because of 3e recovery. Two option, flash back to stock using
http://www.fileserve.com/file/emnCn2j
One click odin, provided you are at&t and build number is 1009 and lower located under battery
2 look for modded 3e recovery in. development for captivate posted by exist
Click to expand...
Click to collapse
Thanks for the reply. What is 3e recovery by the way? I am able to flash back to stock (jf6) using odin 1-click by following the volume up + down method to download. My build number is not in that 1000 series. Are you referring to s/n number found under the battery? In many threads I have seen ppl saying if u r under 1009 build # then you need to use 3 key combo method. You are saying the opposite. I am confused now. Sorry sir but I think I need.more explanation. I thank you for your time
Sent from my SAMSUNG-SGH-I897 using XDA App

Are you on at&t
If you can get into dl mode issuing volume and usb then you have three button combo. Later builds can not use jf6 stock 1010 and up. Your build had to be there, and I do not think it its possible it is not in the 1000s if you have a captivate

mcord11758 said:
Are you on at&t
If you can get into dl mode issuing volume and usb then you have three button combo. Later builds can not use jf6 stock 1010 and up. Your build had to be there, and I do not think it its possible it is not in the 1000s if you have a captivate
Click to expand...
Click to collapse
Pls clarify if s/n # found under battery is actually the build number. Also, according to many posts in this forum, three buttom combo is
1. Vol up
+
2. Vol down
+
3. Press Power button
Since when USB slot became a button? I am sorry but I dont understand.
Sent from my SAMSUNG-SGH-I897 using XDA App

Sorry for confusion
Recovery uses three burton combo
Volume up and down and power
Download mode uses volume up and down plug in usb
On your phone under battery left side under sn above sku there us your build. Mine is 1008

mcord11758 said:
Sorry for confusion
Recovery uses three burton combo
Volume up and down and power
Download mode uses volume up and down plug in usb
On your phone under battery left side under sn above sku there us your build. Mine is 1008
Click to expand...
Click to collapse
Thank you. Mine is 1007. So, now back to the question. I need to flash back to stock JF6 using odin 1-click. Then,i need to root the phone and install.clockworkmod recovery using the info found in the 3 part video series by mobiletechvideos. And,proceed with the custom ROM flash. Is my understanding correct? Thanks for replying patiently to all my queries. Thanks
Sent from my SAMSUNG-SGH-I897 using XDA App

No need to root when in stock.
Dl this
http://forum.xda-developers.com/attachment.php?attachmentid=464425&d=1292362952
This update zip gives you clockwork recovery.
When on stock put this on the root of your sd.
Phone off
Three button combo
When at&t comes up let go all three
Blue recovery
Select reinstall packages
Boots to same recovery
Reinstall packages
Green clockwork recovery
Rom should be saved to sd as well.
Select install zip from sd
Choose zip
Rom file
Confirm
done, let it do it's thing
enjoy

mcord11758 said:
No need to root when in stock.
Dl this
http://forum.xda-developers.com/attachment.php?attachmentid=464425&d=1292362952
This update zip gives you clockwork recovery.
When on stock put this on the root of your sd.
Phone off
Three button combo
When at&t comes up let go all three
Blue recovery
Select reinstall packages
Boots to same recovery
Reinstall packages
Green clockwork recovery
Rom should be saved to sd as well.
Select install zip from sd
Choose zip
Rom file
Confirm
done, let it do it's thing
enjoy
Click to expand...
Click to collapse
WOW! I clicked on the xda link from my phone and the update.zip got downloaded into the download folder in my internal sd (i deleted it). I see the point now. I need to root only to back up all apps and system data such as contacts, sms,media etc. Otherwise, no need to root. Please conform the steps one last time if you don't mind:
1. Copy the update.zip into the root directory of my phone (how to get to the root directory, by the way! Sorry it is a dumb question). Also, copy the custom ROM zip file to the same root directory.
2. Using 3 button combo, follow the remaining steps.
Now, after I successfully flash the custom ROM, can I use the android market and install all the apps I use.
Sent from my SAMSUNG-SGH-I897 using XDA App

antonyvijai said:
WOW! I clicked on the xda link from my phone and the update.zip got downloaded into the download folder in my internal sd (i deleted it). I see the point now. I need to root only to back up all apps and system data such as contacts, sms,media etc. Otherwise, no need to root. Please conform the steps one last time if you don't mind:
1. Copy the update.zip into the root directory of my phone (how to get to the root directory, by the way! Sorry it is a dumb question). Also, copy the custom ROM zip file to the same root directory.
2. Using 3 button combo, follow the remaining steps.
Now, after I successfully flash the custom ROM, can I use the android market and install all the apps I use.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
When you open my files app you are looking at the root of your sd. You will see your download folder, go to it long press either file select move phone will direct you to root if sd, select paste.
You are correct you need root to run programs like titanium backup to backup your apps, but when you flash stock they will all be gone either way. So unless you are rooted now you can not back up your apps. You can dl them again do not restore any system data just user apps. Backup contacts by exporting to ext sd, or sim
I am checking out so I won't be responding again for the night. Good luck

The simplest way there is to root/ flash a rom is to use a one click root program.
http://forum.xda-developers.com/showthread.php?t=739304
If you use this, it roots your phone for you. After you root with the program in the link above( there are videos on how to use the program if you get confused ) Download Rom Manager from the market. open up rom manager and select flash clockwork mod recovery. After that in the program rom manager click reboot into recovery( easier than holding volume buttons) the stock recovery will pop up when the phone reboots. Click reinstall packages. It will bring you back to the stock recovery, click reinstall packages for a second time and you will have cwm (clock work mod ) recovery. In clockwork mod recovery there is an option to back up your phone. do this before you flash a rom. after you back up turn your phone on. Make sure it is in usb debugging. connect to your computer and on your phone select mount sd. drag the downloaded rom .zip file into the sd. the root of you phone is just what ever drive your phone shows up as. unplug your phone reboot into recovery and in cwm recovery there is an option to factory wipe, do this and after it is done, click the option install zip. then choose zip from sd. highlight the rom . zip file you are flashing and select it. it will take a minute or too and when it is done just reboot the phone. First boot will take a while but once it boots your all set. any questions you can pm me and good luck.

^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.

bay_wolf said:
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
Click to expand...
Click to collapse
also very true^^ his toolbox program has everything you would need in one spot

MaximumPotential said:
The simplest way there is to root/ flash a rom is to use a one click root program.
http://forum.xda-developers.com/showthread.php?t=739304
If you use this, it roots your phone for you. After you root with the program in the link above( there are videos on how to use the program if you get confused ) Download Rom Manager from the market. open up rom manager and select flash clockwork mod recovery. After that in the program rom manager click reboot into recovery( easier than holding volume buttons) the stock recovery will pop up when the phone reboots. Click reinstall packages. It will bring you back to the stock recovery, click reinstall packages for a second time and you will have cwm (clock work mod ) recovery. In clockwork mod recovery there is an option to back up your phone. do this before you flash a rom. after you back up turn your phone on. Make sure it is in usb debugging. connect to your computer and on your phone select mount sd. drag the downloaded rom .zip file into the sd. the root of you phone is just what ever drive your phone shows up as. unplug your phone reboot into recovery and in cwm recovery there is an option to factory wipe, do this and after it is done, click the option install zip. then choose zip from sd. highlight the rom . zip file you are flashing and select it. it will take a minute or too and when it is done just reboot the phone. First boot will take a while but once it boots your all set. any questions you can pm me and good luck.
Click to expand...
Click to collapse
Thanks a lot. This helps a lot. I also saw thw video on toolbox from bay_wolf on mobiletechvideo series. That looks pretty simple for an, amateur like me. The explanation you gave me is also superb. Thank you very much
Sent from my SAMSUNG-SGH-I897 using XDA App

bay_wolf said:
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
Click to expand...
Click to collapse
Thank you. I have your toolbox program installed in my computer running 64 bit windows 7 home.premium edition. I have a few questions. My phone is running the leaked JI6 2.2 rightnow. What should I choose first from the toolbox? If I choose, flash to stock then do I need to select thw JF6 firmware file from somewhere or the tool itself will do the job? Sameway, if I click root, then do I need to select a root / clockwork files to finish rooting or again the tool itself will do the job? I understand for flashing the custom ROM I need to choose the the ROM .zip file. I watched the video about your program on mobiletechvideos on youtube. I think I need to watch it again or if you don't mind then can you give me the steps to use your toolbox (given what firmware I have currently running). Thank you
Sent from my SAMSUNG-SGH-I897 using XDA App

Why ji6? What are the benefits other than the audience chip will work?

[Q] Latest and Greatest Root steps for WiFi ONLY XOOM

My apologies if this post is a dup, but I'm havin a hell of a time trying to find the proper steps to root the WiFi only XOOM i have hangin out next to me.
I am seeing a ton of posts about rooting the XOOM, with a good bit of them telling me different informationDated 27 April 2011)
http://forum.xda-developers.com/showthread.php?t=1010568&highlight=rooting+wifi&page=17 tells me to download the WiFi only image (Tiamat 1.3...), but then later tells me to download the Tiamat 1.4 images. [scribbi, my apologies for using your post as the example. But your post got me second guessing myself a little bit...(mostly cus I'm paranoid)]
I'm sure I am just second guessing myself over nothing, but just to be sure...
Is there a GOLDEN set of steps (or sticky), as of 27 APRIL 2011, that can give us (concerned rooters) the proper steps for rooting the WiFi only XOOM such that we can follow without minimal concern for the well-being of our tabs?
(I'm an embedded SW engineer, so I understand the repercussions of what I'm doing, which is why I'm to double checking the procedures before I attempt something that may brick my hardware)
Thanks for your time and mad props to everyone that was part of the effort to root this device. I wish I could code as well that they can.

I still do it the old fashioned way. I'm already unlocked so I just flash the boot image. With a clean system partition, you need to push a few drivers (.ko files) on plus "su" and the Superuser.apk. Superuser and su work together. And finally you need to create a new folder so that your real sdcard can be mounted. I think they changed the name from "sdcard2" to something new in 1.4.0.
Not exactly step by step but you can see which instructions that mirrors most.
New instructions involve CWM which I have not installed yet. I like to know what's done step by step as I have a Canadian system.img. I don't want that flashed over.

you could use the "one click" method found in the dev section. its really like a one click at a time, but goes slow so you can read and see what's going on. if your not comfy with adb I would suggest this method. then update the kernel with the kernel manager app.

jase33 said:
you could use the "one click" method found in the dev section. its really like a one click at a time, but goes slow so you can read and see what's going on. if your not comfy with adb I would suggest this method. then update the kernel with the kernel manager app.
Click to expand...
Click to collapse
I don't trust the "one click" methods. Me, I need to know how every part works together and what every step does. I'm more comfortable with using adb and fastboot manually than I am with someone's idea of user friendly. I'm also the kind of guy that would fix his own car rather than have a mechanic fix it for free.
I should take a look at it. The way you describe it, it almost sounds like a batch file.
Also, when I understand what's going on, I can apply the steps in different situations. For example, most of the instructions here are for a PC but I can do exactly the same things with my Mac Mini when my PC isn't convenient.

OK, let me propose one of the root method which is not required to flash any boot image but is required to flash ClockworkMod Recovery and to use the recovery for rooting.
Such method (i.e. using custom recovery) may work not only on WiFi US model (which I have), but also on other models (Verizon, WiFi Europe etc). But I tested it on WiFi US.
So the step by step are:
1. Install ClockworkMod Recovery v3.0.2.5 as described here:
http://forum.xda-developers.com/showthread.php?t=1038870
This actualy means that you need to unclock bootloader and flash ClockworkMod Recovery.
2. Download attached Root_Xoom.zip file and put it on SD card
3. Insert SD card into Xoom
4. Boot Xoom in the recovery mode
5. In ClockworkMod Recovery menu choose "install zip from sdcard" and "choose zip from sdcard" and install Root_Xoom.zip
6. Reboot Xoom
Hope you will have Root after that.

ok so since I'm not currently rooted it looks like this should work for me. Gonna give it a shot in a little white once I get me some courage juice...

Al936 said:
OK, let me propose one of the root method which is not required to flash any boot image but is required to flash ClockworkMod Recovery and to use the recovery for rooting.
Such method (i.e. using custom recovery) may work not only on WiFi US model (which I have), but also on other models (Verizon, WiFi Europe etc). But I tested it on WiFi US.
So the step by step are:
1. Install ClockworkMod Recovery v3.0.2.5 as described here:
http://forum.xda-developers.com/showthread.php?t=1038870
This actualy means that you need to unclock bootloader and flash ClockworkMod Recovery.
2. Download attached Root_Xoom.zip file and put it on SD card
3. Insert SD card into Xoom
4. Boot Xoom in the recovery mode
5. In ClockworkMod Recovery menu choose "install zip from sdcard" and "choose zip from sdcard" and install Root_Xoom.zip
6. Reboot Xoom
Hope you will have Root after that.
Click to expand...
Click to collapse
Other than rooting what else does this particular file do? Ovrclock, usb hosting, sd access??
Thanks

fabian29906 said:
Other than rooting what else does this particular file do? Ovrclock, usb hosting, sd access??
Click to expand...
Click to collapse
This is for rooting only (as OP requested). It is just to push su binary and superuser.apk into system partition. Nothing else.

after that, get kernel manager and install 1.3.2 for oc, sdcard etc.... 1.4.0 isn't stable is it?

Yes, if you need oc, sdcard etc..., you can flash the kernel you like. It can be done after or before kernel flashing.

Do you have to have an SD card to CWM/root your Xoom?

Yes, you need SD card. CWM installs file from SD card to make root

[Q] Any chance I could get a hand "modding" my phone.

I've been on this site a little over than an hour and a member for about 10 minutes now and i'm trying to find ways to better my devices performance, I am a little familiar with cyanogen mod and know that is is not yet available for the SGS4G and i know better than asking when it will be released. How ever I did see something called 'bionix Black Ice ROM' people i here seemed to be stoked about that. Now what exactly is that? will it help my phones performance? will it get rid of all the bloatware? next if it does help with all of that could somebody step by step walk me through the process or make a youtube vdeo showing how to install black ice step by step? i'm obviously new to all this and really don't wanna brick my phone.
thanks, GD

hi! welcome to the forums, btw! this is the best place to find out stuff about your phone. i was in your place about a month ago, so i know exactly how confused you are.
you should read this for everything referencing your phone.
http://forum.xda-developers.com/showthread.php?t=1117554
to answer your questions: yes. lol. no more bloat, everything will be much faster and basically you will have the phone of your dreams.
i am no expert, but i would root the phone using superoneclickroot. then download root explorer. get krylon's final cwm. download the rom (black ice or frost or w/e you prefer), download bali 3.1, the ext4 converter, and maybe a new modem (optional). flash those following the very well written guides by the devs and you should be ok.
everyone here is pretty awesome and we're all willing to help (even me...who barely knows anything).

Ok, i've already Rooted my phone. I guess now i need to download said programs. any links on these well written descriptive how to? because all the ones i saw confused the hell out of me and id like to believe i'm not completely retarded. Thank you for the welcome BTW.

i would start with krylon final cwm. his directions are pretty straightforward. i used root explorer to move the file where it needed to be.
http://forum.xda-developers.com/showthread.php?t=1099374
i am assuming you downloaded the rom already from the CWM rom section in the bible. its up to you. im biased towards bionix frost, but black ice is just as amazing.
i would also dl the ext converter and bali 3.1 kernel as well. (http://forum.xda-developers.com/showthread.php?t=1123039) (http://forum.xda-developers.com/showthread.php?t=1080871). place all of the zip files you download into the root of your sd card....which means that if you connect your phone to the computer and open it using windows explorer, it is that first window, which lists all of the folders. dont put these files in folders or anything.
once that is done, i restarted my phone in recovery shutting down fully and pressing the power+volume up+volume down. once there, i went to reinstall packages to get into cwm.
then when this loads, i wiped the system/factory reset and wiped the cache. then i went to mounts and storage and mounted my system. (the final mounting output should be: unmount, mount, mount, unmount). i then scrolled to "go back"
i choose install zip file from sd card. choose zip file, which should be the second option if my memory serves me right. scroll of ext converter and install that one. then when that is done, go back to install file from sd card, choose black ice or frost (i LOVE frost) and install that one. then when that is done, i flash my bali 3.1 uv kernel. when that is flashed, i click go back and choose reboot system. once that is done, you will see the galaxy s screen for like 5 min or so followed by the team whiskey logo. once you see this, it will take another minute or so to load up. once you see that the rom loads up...LET THE PHONE SIT FOR 10 minutes. i know it seems long, but just let it sit.
after 10 min or so, i would go into your about phone options and check and see that you have bali3.1 and that the rom is correct.
do these tweaks as well
fugu (http://forum.xda-developers.com/showthread.php?t=1127069)
init.d (http://forum.xda-developers.com/showthread.php?t=1121656&highlight=init.d)
EDIT: Check out raver and dsexton's init.d and fugu tweaks. i switched from the ones above to the ones in the following thread. these guys are too legit.
http://forum.xda-developers.com/showthread.php?t=1141550
you can flash a modem too (http://forum.xda-developers.com/showthread.php?t=1117331) using the same process as flashing any other zip file.
remember, the first option in choosing a zip file is update.zip from krylons final cwm. do not flash this after the rom/ext/whatever. im not sure if this has been addressed (im still a noob), but everytime i did that, i bricked my phone. lol. so just to answer your question before you wonder...cause i always wondered whether i should flash that or not. lol.
hope this helps. feel free to press the thank button.

jager555 said:
i would start with krylon final cwm. his directions are pretty straightforward. i used root explorer to move the file where it needed to be.
http://forum.xda-developers.com/showthread.php?t=1099374
i am assuming you downloaded the rom already from the CWM rom section in the bible. its up to you. im biased towards bionix frost, but black ice is just as amazing.
i would also dl the ext converter and bali 3.1 kernel as well. (http://forum.xda-developers.com/showthread.php?t=1123039) (http://forum.xda-developers.com/showthread.php?t=1080871). place all of the zip files you download into the root of your sd card....which means that if you connect your phone to the computer and open it using windows explorer, it is that first window, which lists all of the folders. dont put these files in folders or anything.
once that is done, i restarted my phone in recovery shutting down fully and pressing the power+volume up+volume down. once there, i went to reinstall packages to get into cwm.
then when this loads, i wiped the system/factory reset and wiped the cache. then i went to mounts and storage and mounted my system. (the final mounting output should be: unmount, mount, mount, unmount). i then scrolled to "go back"
i choose install zip file from sd card. choose zip file, which should be the second option if my memory serves me right. scroll of ext converter and install that one. then when that is done, go back to install file from sd card, choose black ice or frost (i LOVE frost) and install that one. then when that is done, i flash my bali 3.1 uv kernel. when that is flashed, i click go back and choose reboot system. once that is done, you will see the galaxy s screen for like 5 min or so followed by the team whiskey logo. once you see this, it will take another minute or so to load up. once you see that the rom loads up...LET THE PHONE SIT FOR 10 minutes. i know it seems long, but just let it sit.
after 10 min or so, i would go into your about phone options and check and see that you have bali3.1 and that the rom is correct.
do these tweaks as well
fugu (http://forum.xda-developers.com/showthread.php?t=1127069)
init.d (http://forum.xda-developers.com/showthread.php?t=1121656&highlight=init.d)
you can flash a modem too (http://forum.xda-developers.com/showthread.php?t=1117331) using the same process as flashing any other zip file.
remember, the first option in choosing a zip file is update.zip from krylons final cwm. do not flash this after the rom/ext/whatever. im not sure if this has been addressed (im still a noob), but everytime i did that, i bricked my phone. lol. so just to answer your question before you wonder...cause i always wondered whether i should flash that or not. lol.
hope this helps. feel free to press the thank button.
Click to expand...
Click to collapse
thank you very much....

LOL! that was more of a joke. the real credit goes to people like krylon and team whiskey, drhonk, dsexton, chadster, mad, raver, etc. they really made all this possible.
let us know how it goes. you can honestly flash all of this within 5 min (not including wait times to build the cache). once you get it down, you should check out some other posts because people are always coming up with creative tweaks to make things better.

if u need help never feel like u cant ask u can pm me ask in one of the threads i have also ill help u as much as u can

I needs lots of help
jager555 said:
i would start with krylon final cwm. his directions are pretty straightforward. i used root explorer to move the file where it needed to be.
http://forum.xda-developers.com/showthread.php?t=1099374
i am assuming you downloaded the rom already from the CWM rom section in the bible. its up to you. im biased towards bionix frost, but black ice is just as amazing.
i would also dl the ext converter and bali 3.1 kernel as well. (http://forum.xda-developers.com/showthread.php?t=1123039) (http://forum.xda-developers.com/showthread.php?t=1080871). place all of the zip files you download into the root of your sd card....which means that if you connect your phone to the computer and open it using windows explorer, it is that first window, which lists all of the folders. dont put these files in folders or anything.
once that is done, i restarted my phone in recovery shutting down fully and pressing the power+volume up+volume down. once there, i went to reinstall packages to get into cwm.
then when this loads, i wiped the system/factory reset and wiped the cache. then i went to mounts and storage and mounted my system. (the final mounting output should be: unmount, mount, mount, unmount). i then scrolled to "go back"
i choose install zip file from sd card. choose zip file, which should be the second option if my memory serves me right. scroll of ext converter and install that one. then when that is done, go back to install file from sd card, choose black ice or frost (i LOVE frost) and install that one. then when that is done, i flash my bali 3.1 uv kernel. when that is flashed, i click go back and choose reboot system. once that is done, you will see the galaxy s screen for like 5 min or so followed by the team whiskey logo. once you see this, it will take another minute or so to load up. once you see that the rom loads up...LET THE PHONE SIT FOR 10 minutes. i know it seems long, but just let it sit.
after 10 min or so, i would go into your about phone options and check and see that you have bali3.1 and that the rom is correct.
do these tweaks as well
fugu (http://forum.xda-developers.com/showthread.php?t=1127069)
init.d (http://forum.xda-developers.com/showthread.php?t=1121656&highlight=init.d)
you can flash a modem too (http://forum.xda-developers.com/showthread.php?t=1117331) using the same process as flashing any other zip file.
remember, the first option in choosing a zip file is update.zip from krylons final cwm. do not flash this after the rom/ext/whatever. im not sure if this has been addressed (im still a noob), but everytime i did that, i bricked my phone. lol. so just to answer your question before you wonder...cause i always wondered whether i should flash that or not. lol.
hope this helps. feel free to press the thank button.
Click to expand...
Click to collapse
Hi, i am very new and a noob at this site and rooting in general. Hear me out. Im stuck on getting the recovery on the phone. ADB push? Root explorer? I cannot find /system/bin.. PLz walk me tru.

If you rooted your phone, download root explorer from the market. then follow the guides I listed in the post. If you read through the threads, everything has already been asked.
Root explorer is a file manager that allows you to see everything. there are other explorers, like super manager, but I like root explorer. To push a file, download it to your computer, move it to your sd card, open root explorer, find the file, long press, click move, and then navigate to the destination folder and paste.
To get into recovery to flash roms, shut the phone off, then press power and the two volume buttons at the same time. You'll get to a screen with blue text. Click reinstall packages and you'll see krylon's cwm. Follow my previous post prior to going into download mode though.
Sent from my SGH-T959V using XDA Premium App

Anyone looking for links or assistance with ANYTHING SGS4G should be routed here
http://forum.xda-developers.com/showthread.php?t=1117554

Rom manager.

I just downloaded Rom manager and it says i need clockwork recover installed. So i select it.
It gives me 4 choices.
1. Google nexus S
2. Google nexus S 4G
3. Samsung epic 4G
4. Samsung Galaxy S i9000
I have a Samsung Galaxy Captivate i896 (Rogers).
Which one do i select?
Im guessing the i9000 but i will await a reply!
Thanks.

Satstalker said:
I just downloaded Rom manager and it says i need clockwork recover installed. So i select it.
It gives me 4 choices.
1. Google nexus S
2. Google nexus S 4G
3. Samsung epic 4G
4. Samsung Galaxy S i9000
I have a Samsung Galaxy Captivate i896 (Rogers).
Which one do i select?
Im guessing the i9000 but i will await a reply!
Thanks.
Click to expand...
Click to collapse
You'll need option 5: None of the above.
Seriously, though, Rom Manager doesn't work that well for the Captivate. You'll be in much better shape if you do the things that Rom Manager normally handles by yourself.

jmtheiss said:
You'll need option 5: None of the above.
Seriously, though, Rom Manager doesn't work that well for the Captivate. You'll be in much better shape if you do the things that Rom Manager normally handles by yourself.
Click to expand...
Click to collapse
Really!!! Damn. I just bought Rom manager premium and was going to flash CyanogenMod on my phone and i found a video using rom manager and it seems a lot easier to do with it.
Im wondering if its because i changed the stock kernel so i could root the phone! I put the mtcareys-kernel on following a user post.
I bet that's why i does not recognize the phone.

Sorry to hear you spent the money, but maybe it's not entirely bad - Rom Manager works on a lot of other devices, and you can (I believe) transfer the program between devices.
Rom Manager might not recognize your device if the build.prop file was edited. That could be why it's showing the I9000 option.
As far as flashing CyanogenMod, it's fairly straightforward:
1. Flash a kernel that will let you use CWM Recovery (Corn Kernel should have it - Boog's kernel does too, and if you need Froyo, look for speedmod).
2. Once in Recovery, flash the CM update.zip (you may have to do this twice. If so, reboot to recovery again, and flash again).
That should get you to CyanogenMod.

jmtheiss said:
Sorry to hear you spent the money, but maybe it's not entirely bad - Rom Manager works on a lot of other devices, and you can (I believe) transfer the program between devices.
Rom Manager might not recognize your device if the build.prop file was edited. That could be why it's showing the I9000 option.
As far as flashing CyanogenMod, it's fairly straightforward:
1. Flash a kernel that will let you use CWM Recovery (Corn Kernel should have it - Boog's kernel does too, and if you need Froyo, look for speedmod).
2. Once in Recovery, flash the CM update.zip (you may have to do this twice. If so, reboot to recovery again, and flash again).
That should get you to CyanogenMod.
Click to expand...
Click to collapse
Clockwork mod recover. Is that the blue writing that comes up when you press and hold volume up and down and then power? If so then yes i do have that. I used that to root the phone with the corn kernel. Little green guy with a yellow corn a boot up!
I did down load the latest stable version of CM. (update-cm-7.1.0-Captivate-signed)
It says to Place the CyanogenMod update.zip file on the root of the internal memory. But then it says Select Install zip from sdcard.
Also where is the update.zip file? And does it go on the root of the sd card or the root of the internal memory!
I'm following the guide here. http://wiki.cyanogenmod.com/wiki/Samsung_Captivate:_Full_Update_Guide#Before_you_do_anything_.E2.80.94_Make_a_backup

The actual name of the file you downloaded isn't that important. You can leave it with whatever it comes as. The "update.zip" they're referring to is the CM build you downloaded.
What you'll need to do is to copy the .zip file onto your phone Internal SD (the 13 GB partition) at a place you can find it easily. Once you've done that, reboot into CWM recovery (the menu with about 7-9 options, including "install zip from sdcard". It may have blue writing, depending on which build it is. If it only has 4 options, you don't have CWM recovery, but stock recovery.).
Once you're there, select the install zip from sdcard option, and navigate to where you put that zip file. Choose to install it and let it run.
If you're confused about whether you're putting an item on the internal sd card or not, you can connect your phone (including doing the "connect usb storage" dialog) and see what the drive sizes are. Once you know for sure which is your internal SD (13 GB), and which is your external SD (GB based on your card size), you can then re-label them in Windows (e.g. Internal SD and External SD). Those labels will usually stick pretty well.

oops
i was going thru my file manager to get rid of some old downloads and files and i deleted update.zip. i am now pretty sure it was for rom manager or cwm and remember seeing somewhere that it is supposed to stay on the phone.
how to fix this? download new rom manager?
I have noticed lately that when i want to reboot to recovery from rom manager to flash something it just reboots the phone.

bradddo said:
i was going thru my file manager to get rid of some old downloads and files and i deleted update.zip. i am now pretty sure it was for rom manager or cwm and remember seeing somewhere that it is supposed to stay on the phone.
how to fix this? download new rom manager?
I have noticed lately that when i want to reboot to recovery from rom manager to flash something it just reboots the phone.
Click to expand...
Click to collapse
1. Don't worry about the .zip
2. Don't use ROM manager for this device
Sent from my SGH-I777 using xda premium

That s what I was hoping. I don't know what I have actually used this for , I just thought I needed it. I Normally boot to recovery and flash from there. Can I delete it, or is there a purpose for it?
Sent from my SGH-I897 using xda app-developers app

The update.zip contained cwm and was used during the eclair 2.1 days. Now days to get access to cwm we have custom kernels and we can use the extended power button menu of dev roms, button combo, apps, etc. to boot into recovery...so yep, don't worry about keepin it, unless u plan on goin back to eclair.
Sent from my SGH-I897 using xda premium

[Q] Rooted with SOC without unmounting SD

I performed root of my stock Froyo Infuse using Superoneclick.
I did NOT remove or unmount the SD card prior to doing this (it was not mentioned in the instructions I followed on another site).
The phone was successfully rooted. I see no problems evident in behavior of the phone.
I am contemplating flashing a ROM at some time in the future (after more studying of the qkster's "how-to").
Will this previous error cause me any problems?
Is there anything I should do to fix it before I proceed?
Thanks in advance.

You appear to have done everything correctly so you are safe to continue. When it says not having the sdcard connected it refers to your internal sd card, which cannot be mounted to the pc when running SOC.
What ROM you plan on flashing sir? That way I may be able to make the process simpler for you.
Sent from my sweet & buttery Infuse

Thanks. AEON is my objective.

Very well, then you just only need to install cwm so you can flash the rom.
follow method 1 of this:
http://forum.xda-developers.com/showthread.php?p=14376440
Be sure to first install the 3e modded recovery using an root explorer such as solid explorer or es file explorer, both free.
Sent from my sweet & buttery Infuse

andros11 said:
Very well, then you just only need to install cwm so you can flash the rom.
follow method 1 of this:
http://forum.xda-developers.com/showthread.php?p=14376440
Be sure to first install the 3e modded recovery using an root explorer such as solid explorer or es file explorer, both free.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
Or...since he's rooted download aeon, then download one of entropys DD kernels (any one...its only for cwm and the kernel will be replaced by aeon)
Then go to the playstore and search "sgs kernel flasher"
Flash entropys kernel that you downloaded
After reboot (may boot loop don't worry) boot into recovery by holding both volume keys and power simutaniously until your phone reboots and you see Samsung logo...when you see the Samsung logo release the buttons
Wipe data/factory reset
Wipe cache
Wipe dalvic cache (under advanced)
Install zip from sdcard
Choose aeon
Choose yes
Wait
When done reboot
Sent from my HTC Holiday using Tapatalk 2

promissa reGeneo
mg2195 said:
Or...since he's rooted download aeon, then download one of entropys DD kernels (any one...its only for cwm and the kernel will be replaced by aeon)
Then go to the playstore and search "sgs kernel flasher"
Flash entropys kernel that you downloaded
After reboot (may boot loop don't worry) boot into recovery by holding both volume keys and power simutaniously until your phone reboots and you see Samsung logo...when you see the Samsung logo release the buttons
Wipe data/factory reset
Wipe cache
Wipe dalvic cache (under advanced)
Install zip from sdcard
Choose aeon
Choose yes
Wait
When done reboot
Sent from my HTC Holiday using Tapatalk 2
Click to expand...
Click to collapse
I want to follow roughly mg2195’s path suggested above.
I did download SGS.
As a side-trip, I used SGS to install some Froyo-compatible custom Kernels (Infusion 2.0, Infusion 1.8, Defused 1.4).
I now have Defused 1.4 Kernal along with my stock Froyo ROM
I used Root explorer to put the modified recovery file in.
I rebooted several times and used the three-finger press, and now I reach the RED screen:
ClockwordModRecovery v2.5.1.3. But I didn't do anything at that screen yet other than exit.
I have two questions before I proceed;
QUESTION 1 – Can I skip entropy’s DD kernal since I already have CWM red?
QUESTION 2 – I want to verify the modified recovery file that I used is correct:
I use the one suggested in this Infuse video:
http://www.youtube.com/watch?v=Y09p-J_g_Rg
the video links to file
http://llamalord.com/youtube/downloads/3e_recovery_no_sig_check.zip
When I googled that file name 3e_recovery_no_sig_check.zip to double-check, it lead me to this thread for CAPTIVATE:
http://forum.xda-developers.com/showthread.php?t=909213
GTG has a different thread “100% working ClockworkMod Recovery for Infuse 4G” which has a zip file with a different name (recovery-clockwork-2.5.1.2-infuse.zip)
http://forum.xda-developers.com/showthread.php?t=1107881
That 2.5.1.2 is not quite the same version number that I see on my red screen (my red screen says 2.5.1.3) . And on top of that, GTG made some comments on page 1 and 2 of that thread which I didn’t fully understand but lead me to believe Captivate is not a match (so he used i90000 instead). All of this makes me wonder if I have the right CWM red in there.
QUESTION 2 SUMMARY: Do you think my CWM red is good, or do I need to start all over again with GTG’s file?
Additional info found later;
I did find the same file 3e_recovery_no_sig_check.zip that I installed here on xda forums in an Infuse thread by h8rift: http://forum.xda-developers.com/showthread.php?t=1091465 . I downloaded it and verified the zip filename and size is identical to the one I used. That makes me feel a little better about question 2.

Although I've been studying these things, I'm still confused about the next step (trying to figure Q1 answer myself). Maybe if I can understand better, then I can answer myself. The following questions are an attempt to improve my understanding:
Q3 - Does getting the red CWM menu mean my CWM is successfully installed the way it needs to be ready to flash a rom ? (I’d think it does, but not sure).
Q4 - I see the GTG thread was same one linked by andros11. I am totally confused about that thread. Method 1, Step 1 you take a zip (which zip... your ROM or the one linked on the message?) and you rename it update.zip and put it on your sd card (where on your sd card... surely it makes a difference?). And this accomplishes something different than putting the modified file named recovery file into root/system/bin/recovery using root explorer?
Q5 – the only purpose of mg2195’s recommendation to download entropy’s kernal was to get the modified CWM, right?
Thanks for your patience.
========================
I think I will go ahead and flash Entropy's daily driver, should make all my questions irrelevant.
I'll post results, fingers crossed that it'll be a proclamation of victory.
In the meantime, I'm still curious about above, especially question #4.
==================
Edited again - actually I am going to sleep on it for a few days and make sure this is what I want to do.

electricpete1 said:
Although I've been studying these things, I'm still confused about the next step (trying to figure Q1 answer myself). Maybe if I can understand better, then I can answer myself. The following questions are an attempt to improve my understanding:
Q3 - Does getting the red CWM menu mean my CWM is successfully installed the way it needs to be ready to flash a rom ? (I’d think it does, but not sure).
Q4 - I see the GTG thread was same one linked by andros11. I am totally confused about that thread. Method 1, Step 1 you take a zip (which zip... your ROM or the one linked on the message?) and you rename it update.zip and put it on your sd card (where on your sd card... surely it makes a difference?). And this accomplishes something different than putting the modified file named recovery file into root/system/bin/recovery using root explorer?
Q5 – the only purpose of mg2195’s recommendation to download entropy’s kernal was to get the modified CWM, right?
Thanks for your patience.
========================
I think I will go ahead and flash Entropy's daily driver, should make all my questions irrelevant.
I'll post results, fingers crossed that it'll be a proclamation of victory.
In the meantime, I'm still curious about above, especially question #4.
==================
Edited again - actually I am going to sleep on it for a few days and make sure this is what I want to do.
Click to expand...
Click to collapse
Since you already managed to get Cwm red, you have no need of using the 3e modded recovery. That would only allow you to flash the zip linked in the OP of the gtg thread, which should be placed on the root of your /sdcard.
Entropy's dd mg2195 suggested would replace your kernel with a Gingerbread one that included cwm.
I would say to go ahead and flash Aeon since you already have CWM.
Sent from my sweet & buttery Infuse