Related
I flashed the leaked froyo firmware I897UCJI6 on my samsung captivate using odin 1-click method. I have a working 2.2 now. My phone is not rooted. I am planning to flash a custom ROM and try other custom ROMs out there in the market. I've gone through a three part video series by mobiletechvideos on how to root and flash a custom ROM (http://forum.xda-developers.com/showthread.php?t=884364). But, i still have a few questions.
1. For rooting, do i need to flash the phone back to the stock JF6?
2. In the xda link given above, i am fine until step #4. Step #5 is a little bit confusing to me. After i copy the root file to the root directory in the internal sd card on my phone, i rename it to update.zip. Also, i copy the clockworkrecovery to the root directory in the internal sd card in the phone and rename it to update.zip. Now, after i am doing with rooting and clockworkrecovery, i have to proceed further to flash the custom ROM. Now, the steps mentioned in the xda forum does not say anything about moving the custom ROM file to the root directory in the internal sd card on the phone. My question is: Do i need to copy the custom ROM zip file into the root directory of the phone? Do i need to rename the custome ROM file to update.zip as well?
Someone please help.
Yes rom goes on sd, no do not rename
If you are on ji6 you will not be able to install clockwork because of 3e recovery. Two option, flash back to stock using
http://www.fileserve.com/file/emnCn2j
One click odin, provided you are at&t and build number is 1009 and lower located under battery
2 look for modded 3e recovery in. development for captivate posted by exist
mcord11758 said:
Yes rom goes on sd, no do not rename
If you are on ji6 you will not be able to install clockwork because of 3e recovery. Two option, flash back to stock using
http://www.fileserve.com/file/emnCn2j
One click odin, provided you are at&t and build number is 1009 and lower located under battery
2 look for modded 3e recovery in. development for captivate posted by exist
Click to expand...
Click to collapse
Thanks for the reply. What is 3e recovery by the way? I am able to flash back to stock (jf6) using odin 1-click by following the volume up + down method to download. My build number is not in that 1000 series. Are you referring to s/n number found under the battery? In many threads I have seen ppl saying if u r under 1009 build # then you need to use 3 key combo method. You are saying the opposite. I am confused now. Sorry sir but I think I need.more explanation. I thank you for your time
Sent from my SAMSUNG-SGH-I897 using XDA App
Are you on at&t
If you can get into dl mode issuing volume and usb then you have three button combo. Later builds can not use jf6 stock 1010 and up. Your build had to be there, and I do not think it its possible it is not in the 1000s if you have a captivate
mcord11758 said:
Are you on at&t
If you can get into dl mode issuing volume and usb then you have three button combo. Later builds can not use jf6 stock 1010 and up. Your build had to be there, and I do not think it its possible it is not in the 1000s if you have a captivate
Click to expand...
Click to collapse
Pls clarify if s/n # found under battery is actually the build number. Also, according to many posts in this forum, three buttom combo is
1. Vol up
+
2. Vol down
+
3. Press Power button
Since when USB slot became a button? I am sorry but I dont understand.
Sent from my SAMSUNG-SGH-I897 using XDA App
Sorry for confusion
Recovery uses three burton combo
Volume up and down and power
Download mode uses volume up and down plug in usb
On your phone under battery left side under sn above sku there us your build. Mine is 1008
mcord11758 said:
Sorry for confusion
Recovery uses three burton combo
Volume up and down and power
Download mode uses volume up and down plug in usb
On your phone under battery left side under sn above sku there us your build. Mine is 1008
Click to expand...
Click to collapse
Thank you. Mine is 1007. So, now back to the question. I need to flash back to stock JF6 using odin 1-click. Then,i need to root the phone and install.clockworkmod recovery using the info found in the 3 part video series by mobiletechvideos. And,proceed with the custom ROM flash. Is my understanding correct? Thanks for replying patiently to all my queries. Thanks
Sent from my SAMSUNG-SGH-I897 using XDA App
No need to root when in stock.
Dl this
http://forum.xda-developers.com/attachment.php?attachmentid=464425&d=1292362952
This update zip gives you clockwork recovery.
When on stock put this on the root of your sd.
Phone off
Three button combo
When at&t comes up let go all three
Blue recovery
Select reinstall packages
Boots to same recovery
Reinstall packages
Green clockwork recovery
Rom should be saved to sd as well.
Select install zip from sd
Choose zip
Rom file
Confirm
done, let it do it's thing
enjoy
mcord11758 said:
No need to root when in stock.
Dl this
http://forum.xda-developers.com/attachment.php?attachmentid=464425&d=1292362952
This update zip gives you clockwork recovery.
When on stock put this on the root of your sd.
Phone off
Three button combo
When at&t comes up let go all three
Blue recovery
Select reinstall packages
Boots to same recovery
Reinstall packages
Green clockwork recovery
Rom should be saved to sd as well.
Select install zip from sd
Choose zip
Rom file
Confirm
done, let it do it's thing
enjoy
Click to expand...
Click to collapse
WOW! I clicked on the xda link from my phone and the update.zip got downloaded into the download folder in my internal sd (i deleted it). I see the point now. I need to root only to back up all apps and system data such as contacts, sms,media etc. Otherwise, no need to root. Please conform the steps one last time if you don't mind:
1. Copy the update.zip into the root directory of my phone (how to get to the root directory, by the way! Sorry it is a dumb question). Also, copy the custom ROM zip file to the same root directory.
2. Using 3 button combo, follow the remaining steps.
Now, after I successfully flash the custom ROM, can I use the android market and install all the apps I use.
Sent from my SAMSUNG-SGH-I897 using XDA App
antonyvijai said:
WOW! I clicked on the xda link from my phone and the update.zip got downloaded into the download folder in my internal sd (i deleted it). I see the point now. I need to root only to back up all apps and system data such as contacts, sms,media etc. Otherwise, no need to root. Please conform the steps one last time if you don't mind:
1. Copy the update.zip into the root directory of my phone (how to get to the root directory, by the way! Sorry it is a dumb question). Also, copy the custom ROM zip file to the same root directory.
2. Using 3 button combo, follow the remaining steps.
Now, after I successfully flash the custom ROM, can I use the android market and install all the apps I use.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
When you open my files app you are looking at the root of your sd. You will see your download folder, go to it long press either file select move phone will direct you to root if sd, select paste.
You are correct you need root to run programs like titanium backup to backup your apps, but when you flash stock they will all be gone either way. So unless you are rooted now you can not back up your apps. You can dl them again do not restore any system data just user apps. Backup contacts by exporting to ext sd, or sim
I am checking out so I won't be responding again for the night. Good luck
The simplest way there is to root/ flash a rom is to use a one click root program.
http://forum.xda-developers.com/showthread.php?t=739304
If you use this, it roots your phone for you. After you root with the program in the link above( there are videos on how to use the program if you get confused ) Download Rom Manager from the market. open up rom manager and select flash clockwork mod recovery. After that in the program rom manager click reboot into recovery( easier than holding volume buttons) the stock recovery will pop up when the phone reboots. Click reinstall packages. It will bring you back to the stock recovery, click reinstall packages for a second time and you will have cwm (clock work mod ) recovery. In clockwork mod recovery there is an option to back up your phone. do this before you flash a rom. after you back up turn your phone on. Make sure it is in usb debugging. connect to your computer and on your phone select mount sd. drag the downloaded rom .zip file into the sd. the root of you phone is just what ever drive your phone shows up as. unplug your phone reboot into recovery and in cwm recovery there is an option to factory wipe, do this and after it is done, click the option install zip. then choose zip from sd. highlight the rom . zip file you are flashing and select it. it will take a minute or too and when it is done just reboot the phone. First boot will take a while but once it boots your all set. any questions you can pm me and good luck.
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
bay_wolf said:
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
Click to expand...
Click to collapse
also very true^^ his toolbox program has everything you would need in one spot
MaximumPotential said:
The simplest way there is to root/ flash a rom is to use a one click root program.
http://forum.xda-developers.com/showthread.php?t=739304
If you use this, it roots your phone for you. After you root with the program in the link above( there are videos on how to use the program if you get confused ) Download Rom Manager from the market. open up rom manager and select flash clockwork mod recovery. After that in the program rom manager click reboot into recovery( easier than holding volume buttons) the stock recovery will pop up when the phone reboots. Click reinstall packages. It will bring you back to the stock recovery, click reinstall packages for a second time and you will have cwm (clock work mod ) recovery. In clockwork mod recovery there is an option to back up your phone. do this before you flash a rom. after you back up turn your phone on. Make sure it is in usb debugging. connect to your computer and on your phone select mount sd. drag the downloaded rom .zip file into the sd. the root of you phone is just what ever drive your phone shows up as. unplug your phone reboot into recovery and in cwm recovery there is an option to factory wipe, do this and after it is done, click the option install zip. then choose zip from sd. highlight the rom . zip file you are flashing and select it. it will take a minute or too and when it is done just reboot the phone. First boot will take a while but once it boots your all set. any questions you can pm me and good luck.
Click to expand...
Click to collapse
Thanks a lot. This helps a lot. I also saw thw video on toolbox from bay_wolf on mobiletechvideo series. That looks pretty simple for an, amateur like me. The explanation you gave me is also superb. Thank you very much
Sent from my SAMSUNG-SGH-I897 using XDA App
bay_wolf said:
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
Click to expand...
Click to collapse
Thank you. I have your toolbox program installed in my computer running 64 bit windows 7 home.premium edition. I have a few questions. My phone is running the leaked JI6 2.2 rightnow. What should I choose first from the toolbox? If I choose, flash to stock then do I need to select thw JF6 firmware file from somewhere or the tool itself will do the job? Sameway, if I click root, then do I need to select a root / clockwork files to finish rooting or again the tool itself will do the job? I understand for flashing the custom ROM I need to choose the the ROM .zip file. I watched the video about your program on mobiletechvideos on youtube. I think I need to watch it again or if you don't mind then can you give me the steps to use your toolbox (given what firmware I have currently running). Thank you
Sent from my SAMSUNG-SGH-I897 using XDA App
Why ji6? What are the benefits other than the audience chip will work?
I've been on this site a little over than an hour and a member for about 10 minutes now and i'm trying to find ways to better my devices performance, I am a little familiar with cyanogen mod and know that is is not yet available for the SGS4G and i know better than asking when it will be released. How ever I did see something called 'bionix Black Ice ROM' people i here seemed to be stoked about that. Now what exactly is that? will it help my phones performance? will it get rid of all the bloatware? next if it does help with all of that could somebody step by step walk me through the process or make a youtube vdeo showing how to install black ice step by step? i'm obviously new to all this and really don't wanna brick my phone.
thanks, GD
hi! welcome to the forums, btw! this is the best place to find out stuff about your phone. i was in your place about a month ago, so i know exactly how confused you are.
you should read this for everything referencing your phone.
http://forum.xda-developers.com/showthread.php?t=1117554
to answer your questions: yes. lol. no more bloat, everything will be much faster and basically you will have the phone of your dreams.
i am no expert, but i would root the phone using superoneclickroot. then download root explorer. get krylon's final cwm. download the rom (black ice or frost or w/e you prefer), download bali 3.1, the ext4 converter, and maybe a new modem (optional). flash those following the very well written guides by the devs and you should be ok.
everyone here is pretty awesome and we're all willing to help (even me...who barely knows anything).
Ok, i've already Rooted my phone. I guess now i need to download said programs. any links on these well written descriptive how to? because all the ones i saw confused the hell out of me and id like to believe i'm not completely retarded. Thank you for the welcome BTW.
i would start with krylon final cwm. his directions are pretty straightforward. i used root explorer to move the file where it needed to be.
http://forum.xda-developers.com/showthread.php?t=1099374
i am assuming you downloaded the rom already from the CWM rom section in the bible. its up to you. im biased towards bionix frost, but black ice is just as amazing.
i would also dl the ext converter and bali 3.1 kernel as well. (http://forum.xda-developers.com/showthread.php?t=1123039) (http://forum.xda-developers.com/showthread.php?t=1080871). place all of the zip files you download into the root of your sd card....which means that if you connect your phone to the computer and open it using windows explorer, it is that first window, which lists all of the folders. dont put these files in folders or anything.
once that is done, i restarted my phone in recovery shutting down fully and pressing the power+volume up+volume down. once there, i went to reinstall packages to get into cwm.
then when this loads, i wiped the system/factory reset and wiped the cache. then i went to mounts and storage and mounted my system. (the final mounting output should be: unmount, mount, mount, unmount). i then scrolled to "go back"
i choose install zip file from sd card. choose zip file, which should be the second option if my memory serves me right. scroll of ext converter and install that one. then when that is done, go back to install file from sd card, choose black ice or frost (i LOVE frost) and install that one. then when that is done, i flash my bali 3.1 uv kernel. when that is flashed, i click go back and choose reboot system. once that is done, you will see the galaxy s screen for like 5 min or so followed by the team whiskey logo. once you see this, it will take another minute or so to load up. once you see that the rom loads up...LET THE PHONE SIT FOR 10 minutes. i know it seems long, but just let it sit.
after 10 min or so, i would go into your about phone options and check and see that you have bali3.1 and that the rom is correct.
do these tweaks as well
fugu (http://forum.xda-developers.com/showthread.php?t=1127069)
init.d (http://forum.xda-developers.com/showthread.php?t=1121656&highlight=init.d)
EDIT: Check out raver and dsexton's init.d and fugu tweaks. i switched from the ones above to the ones in the following thread. these guys are too legit.
http://forum.xda-developers.com/showthread.php?t=1141550
you can flash a modem too (http://forum.xda-developers.com/showthread.php?t=1117331) using the same process as flashing any other zip file.
remember, the first option in choosing a zip file is update.zip from krylons final cwm. do not flash this after the rom/ext/whatever. im not sure if this has been addressed (im still a noob), but everytime i did that, i bricked my phone. lol. so just to answer your question before you wonder...cause i always wondered whether i should flash that or not. lol.
hope this helps. feel free to press the thank button.
jager555 said:
i would start with krylon final cwm. his directions are pretty straightforward. i used root explorer to move the file where it needed to be.
http://forum.xda-developers.com/showthread.php?t=1099374
i am assuming you downloaded the rom already from the CWM rom section in the bible. its up to you. im biased towards bionix frost, but black ice is just as amazing.
i would also dl the ext converter and bali 3.1 kernel as well. (http://forum.xda-developers.com/showthread.php?t=1123039) (http://forum.xda-developers.com/showthread.php?t=1080871). place all of the zip files you download into the root of your sd card....which means that if you connect your phone to the computer and open it using windows explorer, it is that first window, which lists all of the folders. dont put these files in folders or anything.
once that is done, i restarted my phone in recovery shutting down fully and pressing the power+volume up+volume down. once there, i went to reinstall packages to get into cwm.
then when this loads, i wiped the system/factory reset and wiped the cache. then i went to mounts and storage and mounted my system. (the final mounting output should be: unmount, mount, mount, unmount). i then scrolled to "go back"
i choose install zip file from sd card. choose zip file, which should be the second option if my memory serves me right. scroll of ext converter and install that one. then when that is done, go back to install file from sd card, choose black ice or frost (i LOVE frost) and install that one. then when that is done, i flash my bali 3.1 uv kernel. when that is flashed, i click go back and choose reboot system. once that is done, you will see the galaxy s screen for like 5 min or so followed by the team whiskey logo. once you see this, it will take another minute or so to load up. once you see that the rom loads up...LET THE PHONE SIT FOR 10 minutes. i know it seems long, but just let it sit.
after 10 min or so, i would go into your about phone options and check and see that you have bali3.1 and that the rom is correct.
do these tweaks as well
fugu (http://forum.xda-developers.com/showthread.php?t=1127069)
init.d (http://forum.xda-developers.com/showthread.php?t=1121656&highlight=init.d)
you can flash a modem too (http://forum.xda-developers.com/showthread.php?t=1117331) using the same process as flashing any other zip file.
remember, the first option in choosing a zip file is update.zip from krylons final cwm. do not flash this after the rom/ext/whatever. im not sure if this has been addressed (im still a noob), but everytime i did that, i bricked my phone. lol. so just to answer your question before you wonder...cause i always wondered whether i should flash that or not. lol.
hope this helps. feel free to press the thank button.
Click to expand...
Click to collapse
thank you very much....
LOL! that was more of a joke. the real credit goes to people like krylon and team whiskey, drhonk, dsexton, chadster, mad, raver, etc. they really made all this possible.
let us know how it goes. you can honestly flash all of this within 5 min (not including wait times to build the cache). once you get it down, you should check out some other posts because people are always coming up with creative tweaks to make things better.
if u need help never feel like u cant ask u can pm me ask in one of the threads i have also ill help u as much as u can
I needs lots of help
jager555 said:
i would start with krylon final cwm. his directions are pretty straightforward. i used root explorer to move the file where it needed to be.
http://forum.xda-developers.com/showthread.php?t=1099374
i am assuming you downloaded the rom already from the CWM rom section in the bible. its up to you. im biased towards bionix frost, but black ice is just as amazing.
i would also dl the ext converter and bali 3.1 kernel as well. (http://forum.xda-developers.com/showthread.php?t=1123039) (http://forum.xda-developers.com/showthread.php?t=1080871). place all of the zip files you download into the root of your sd card....which means that if you connect your phone to the computer and open it using windows explorer, it is that first window, which lists all of the folders. dont put these files in folders or anything.
once that is done, i restarted my phone in recovery shutting down fully and pressing the power+volume up+volume down. once there, i went to reinstall packages to get into cwm.
then when this loads, i wiped the system/factory reset and wiped the cache. then i went to mounts and storage and mounted my system. (the final mounting output should be: unmount, mount, mount, unmount). i then scrolled to "go back"
i choose install zip file from sd card. choose zip file, which should be the second option if my memory serves me right. scroll of ext converter and install that one. then when that is done, go back to install file from sd card, choose black ice or frost (i LOVE frost) and install that one. then when that is done, i flash my bali 3.1 uv kernel. when that is flashed, i click go back and choose reboot system. once that is done, you will see the galaxy s screen for like 5 min or so followed by the team whiskey logo. once you see this, it will take another minute or so to load up. once you see that the rom loads up...LET THE PHONE SIT FOR 10 minutes. i know it seems long, but just let it sit.
after 10 min or so, i would go into your about phone options and check and see that you have bali3.1 and that the rom is correct.
do these tweaks as well
fugu (http://forum.xda-developers.com/showthread.php?t=1127069)
init.d (http://forum.xda-developers.com/showthread.php?t=1121656&highlight=init.d)
you can flash a modem too (http://forum.xda-developers.com/showthread.php?t=1117331) using the same process as flashing any other zip file.
remember, the first option in choosing a zip file is update.zip from krylons final cwm. do not flash this after the rom/ext/whatever. im not sure if this has been addressed (im still a noob), but everytime i did that, i bricked my phone. lol. so just to answer your question before you wonder...cause i always wondered whether i should flash that or not. lol.
hope this helps. feel free to press the thank button.
Click to expand...
Click to collapse
Hi, i am very new and a noob at this site and rooting in general. Hear me out. Im stuck on getting the recovery on the phone. ADB push? Root explorer? I cannot find /system/bin.. PLz walk me tru.
If you rooted your phone, download root explorer from the market. then follow the guides I listed in the post. If you read through the threads, everything has already been asked.
Root explorer is a file manager that allows you to see everything. there are other explorers, like super manager, but I like root explorer. To push a file, download it to your computer, move it to your sd card, open root explorer, find the file, long press, click move, and then navigate to the destination folder and paste.
To get into recovery to flash roms, shut the phone off, then press power and the two volume buttons at the same time. You'll get to a screen with blue text. Click reinstall packages and you'll see krylon's cwm. Follow my previous post prior to going into download mode though.
Sent from my SGH-T959V using XDA Premium App
Anyone looking for links or assistance with ANYTHING SGS4G should be routed here
http://forum.xda-developers.com/showthread.php?t=1117554
I'm about to get a g2x very soon, and i heard that the stock rom sucks and that Hellfire Pheonix's is best. The instructions given on the op was not very beginner friendly, so i'm a bit confuse. This is going to be my first android and i would appreciate it if someone could link me to some sort of reference and tutorial for the installation of Hellfire Phoenix.
I've searched and google, but i had no luck. If you guys know if a detailed tutorial is out there, then just tell me and i'll put more effort into finding my answer. Thank you very much.
EDIT: To be more specific, what threw me off was "DO NOT use CWM to load the rom to your SD card. CWM has been known to cause file corruption when using it to transfer the zip file.". From all the tutorials that i've read and seen, they all use cwm. what are the alternatives?
Trung Lam said:
I'm about to get a g2x very soon, and i heard that the stock rom sucks and that Hellfire Pheonix's is best. The instructions given on the op was not very beginner friendly, so i'm a bit confuse. This is going to be my first android and i would appreciate it if someone could link me to some sort of reference and tutorial for the installation of Hellfire Phoenix.
I've searched and google, but i had no luck. If you guys know if a detailed tutorial is out there, then just tell me and i'll put more effort into finding my answer. Thank you very much.
EDIT: To be more specific, what threw me off was "DO NOT use CWM to load the rom to your SD card. CWM has been known to cause file corruption when using it to transfer the zip file.". From all the tutorials that i've read and seen, they all use cwm. what are the alternatives?
Click to expand...
Click to collapse
What it means is don't boot into CWM and mount usb storage and copy files to sd card from there because it is known to corrupt the file and then could end up in a bad flash and it could harm ur phone.
When ur gonna copy the rom ur gonna flash to ur sd card, make sure ur booted into android first and mount usb storage from there.
Hope this helped
Sent from my LG-P999 using XDA App
russell956956 said:
What it means is don't boot into CWM and mount usb storage and copy files to sd card from there because it is known to corrupt the file and then could end up in a bad flash and it could harm ur phone.
When ur gonna copy the rom ur gonna flash to ur sd card, make sure ur booted into android first and mount usb storage from there.
Hope this helped
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Correct.
Now, to fully answer your question:
Ok, adding this in after I wrote this to make things clearer: before starting make sure you:
1. Have G2x scrubber in the root of your SD card
2. Have the zip for your ROM (HFP in this case) in the root of your SD card
3. Have a copy of gapps (Google Apps) in the root of your sd card, get it here
4. After flashing CWM make a back-up (nandroid) of your stock ROM via CWM
First you need to flash Clockwork Mod (CWM) on your phone go here for that:
http://forum.xda-developers.com/showthread.php?t=1056847
Also, note: NEVER use ROM manager to flash CWM.
Second grab G2x scrubber from the HFP thread.
Next boot into CWM by holding volume down and power at the same time as the phone starts up. I find it helpful to count to three (eg, one one thousand, two one thousand, etc) after the blue and white (as opposed to plain white) LG logo first appears, that way you will have your finger off the power button when CWM starts. And in case it needs to be explained: you navigate CWM via the volume keys and make selections with the power button.
So, having downloaded G2x scrubber to your phone, go to "install zip from SD card" then "choose zip from SDcard" and navigate to G2x scrubber, run it twice.
Once that is done, use the same install zip option and this time choose the HFP zip.
Next select the gapps zip and flash it.
You're all done. Reboot and enjoy.
Thanks for the helpful replies! I feel very confident about modding my g2x when i get it now!
EDIT: Do i need to root my phone if i'm going to install HFP?
Trung Lam said:
Thanks for the helpful replies! I feel very confident about modding my g2x when i get it now!
EDIT: Do i need to root my phone if i'm going to install HFP?
Click to expand...
Click to collapse
No, just use NVFlasher to flash ClockWorkMod Recovery, then flash your rom. You'll be rooted when you finish.
I found good guides on TheUnlockr. There are links in the thread discussing Hellfire Sandwich (HFS). If you don't need wifi calling or the ability to take video I would recommend using HFS v1.2. It is an update to ICS (Android 4.0.x) but it is not completely stable yet.
Волк said:
Correct.
Now, to fully answer your question:
Ok, adding this in after I wrote this to make things clearer: before starting make sure you:
1. Have G2x scrubber in the root of your SD card
2. Have the zip for your ROM (HFP in this case) in the root of your SD card
3. Have a copy of gapps (Google Apps) in the root of your sd card, get it here
4. After flashing CWM make a back-up (nandroid) of your stock ROM via CWM
First you need to flash Clockwork Mod (CWM) on your phone go here for that:
http://forum.xda-developers.com/showthread.php?t=1056847
Also, note: NEVER use ROM manager to flash CWM.
Second grab G2x scrubber from the HFP thread.
Next boot into CWM by holding volume down and power at the same time as the phone starts up. I find it helpful to count to three (eg, one one thousand, two one thousand, etc) after the blue and white (as opposed to plain white) LG logo first appears, that way you will have your finger off the power button when CWM starts. And in case it needs to be explained: you navigate CWM via the volume keys and make selections with the power button.
So, having downloaded G2x scrubber to your phone, go to "install zip from SD card" then "choose zip from SDcard" and navigate to G2x scrubber, run it twice.
Once that is done, use the same install zip option and this time choose the HFP zip.
Next select the gapps zip and flash it.
You're all done. Reboot and enjoy.
Click to expand...
Click to collapse
Thank you very much! Волк, Your instruction is very helpful. I run the Hellfire V2.0 two days. So far So good. And thank you very much! x0xhellx0x, You are genius!
I just downloaded Rom manager and it says i need clockwork recover installed. So i select it.
It gives me 4 choices.
1. Google nexus S
2. Google nexus S 4G
3. Samsung epic 4G
4. Samsung Galaxy S i9000
I have a Samsung Galaxy Captivate i896 (Rogers).
Which one do i select?
Im guessing the i9000 but i will await a reply!
Thanks.
Satstalker said:
I just downloaded Rom manager and it says i need clockwork recover installed. So i select it.
It gives me 4 choices.
1. Google nexus S
2. Google nexus S 4G
3. Samsung epic 4G
4. Samsung Galaxy S i9000
I have a Samsung Galaxy Captivate i896 (Rogers).
Which one do i select?
Im guessing the i9000 but i will await a reply!
Thanks.
Click to expand...
Click to collapse
You'll need option 5: None of the above.
Seriously, though, Rom Manager doesn't work that well for the Captivate. You'll be in much better shape if you do the things that Rom Manager normally handles by yourself.
jmtheiss said:
You'll need option 5: None of the above.
Seriously, though, Rom Manager doesn't work that well for the Captivate. You'll be in much better shape if you do the things that Rom Manager normally handles by yourself.
Click to expand...
Click to collapse
Really!!! Damn. I just bought Rom manager premium and was going to flash CyanogenMod on my phone and i found a video using rom manager and it seems a lot easier to do with it.
Im wondering if its because i changed the stock kernel so i could root the phone! I put the mtcareys-kernel on following a user post.
I bet that's why i does not recognize the phone.
Sorry to hear you spent the money, but maybe it's not entirely bad - Rom Manager works on a lot of other devices, and you can (I believe) transfer the program between devices.
Rom Manager might not recognize your device if the build.prop file was edited. That could be why it's showing the I9000 option.
As far as flashing CyanogenMod, it's fairly straightforward:
1. Flash a kernel that will let you use CWM Recovery (Corn Kernel should have it - Boog's kernel does too, and if you need Froyo, look for speedmod).
2. Once in Recovery, flash the CM update.zip (you may have to do this twice. If so, reboot to recovery again, and flash again).
That should get you to CyanogenMod.
jmtheiss said:
Sorry to hear you spent the money, but maybe it's not entirely bad - Rom Manager works on a lot of other devices, and you can (I believe) transfer the program between devices.
Rom Manager might not recognize your device if the build.prop file was edited. That could be why it's showing the I9000 option.
As far as flashing CyanogenMod, it's fairly straightforward:
1. Flash a kernel that will let you use CWM Recovery (Corn Kernel should have it - Boog's kernel does too, and if you need Froyo, look for speedmod).
2. Once in Recovery, flash the CM update.zip (you may have to do this twice. If so, reboot to recovery again, and flash again).
That should get you to CyanogenMod.
Click to expand...
Click to collapse
Clockwork mod recover. Is that the blue writing that comes up when you press and hold volume up and down and then power? If so then yes i do have that. I used that to root the phone with the corn kernel. Little green guy with a yellow corn a boot up!
I did down load the latest stable version of CM. (update-cm-7.1.0-Captivate-signed)
It says to Place the CyanogenMod update.zip file on the root of the internal memory. But then it says Select Install zip from sdcard.
Also where is the update.zip file? And does it go on the root of the sd card or the root of the internal memory!
I'm following the guide here. http://wiki.cyanogenmod.com/wiki/Samsung_Captivate:_Full_Update_Guide#Before_you_do_anything_.E2.80.94_Make_a_backup
The actual name of the file you downloaded isn't that important. You can leave it with whatever it comes as. The "update.zip" they're referring to is the CM build you downloaded.
What you'll need to do is to copy the .zip file onto your phone Internal SD (the 13 GB partition) at a place you can find it easily. Once you've done that, reboot into CWM recovery (the menu with about 7-9 options, including "install zip from sdcard". It may have blue writing, depending on which build it is. If it only has 4 options, you don't have CWM recovery, but stock recovery.).
Once you're there, select the install zip from sdcard option, and navigate to where you put that zip file. Choose to install it and let it run.
If you're confused about whether you're putting an item on the internal sd card or not, you can connect your phone (including doing the "connect usb storage" dialog) and see what the drive sizes are. Once you know for sure which is your internal SD (13 GB), and which is your external SD (GB based on your card size), you can then re-label them in Windows (e.g. Internal SD and External SD). Those labels will usually stick pretty well.
oops
i was going thru my file manager to get rid of some old downloads and files and i deleted update.zip. i am now pretty sure it was for rom manager or cwm and remember seeing somewhere that it is supposed to stay on the phone.
how to fix this? download new rom manager?
I have noticed lately that when i want to reboot to recovery from rom manager to flash something it just reboots the phone.
bradddo said:
i was going thru my file manager to get rid of some old downloads and files and i deleted update.zip. i am now pretty sure it was for rom manager or cwm and remember seeing somewhere that it is supposed to stay on the phone.
how to fix this? download new rom manager?
I have noticed lately that when i want to reboot to recovery from rom manager to flash something it just reboots the phone.
Click to expand...
Click to collapse
1. Don't worry about the .zip
2. Don't use ROM manager for this device
Sent from my SGH-I777 using xda premium
That s what I was hoping. I don't know what I have actually used this for , I just thought I needed it. I Normally boot to recovery and flash from there. Can I delete it, or is there a purpose for it?
Sent from my SGH-I897 using xda app-developers app
The update.zip contained cwm and was used during the eclair 2.1 days. Now days to get access to cwm we have custom kernels and we can use the extended power button menu of dev roms, button combo, apps, etc. to boot into recovery...so yep, don't worry about keepin it, unless u plan on goin back to eclair.
Sent from my SGH-I897 using xda premium
**this was a very early guide and most of the files and methods referenced in it are long outdated, sounds crazy I know as the phone has barely been out, but i recommend finding more recent guides at this point. I wanted to leave this up for archival reasons though. As of 7-22 I am running dhackers CM10 build with great results. Just don't forget to set max cpu clock back down to 1500 mhz if you don't want it over locked out of the box **
As per the usual disclaimer....at your own risk, be aware of IMEI loss issues and whatnot...basically cover your own butt.....and enjoy.....
7-15 2:46pm **As of right now voice and SMS are not working on my phone while other people report they are working fine. While you can still play around and see just how amazingly fast CM is on this phone, YMMV. If it doesn't work you need to know how to go back to stock before trying this.
7-29 this guide is very old, it pre-dates kexec and is only here for historical purposes
For clarification: The question was asked if one is supposed to follow the original Team Epic Kexec kernel instructions or these steps and the answer is two fold. If your goal is to install the UNOFFICIAL CM9 built by Invisiblek (which is the purpose of this thread), then you follow the steps in THIS THREAD ONLY. There are a couple steps and a couple files linked to in the original Kexec page that will not allow you to install CM9. That page was made for those wanting to try out their Kexec Proof of Concept KERNEL, not install a ROM of any kind.
This thread makes some assumptions, such as you already have a working install of the Android SDK and ADB, you already have the drivers installed, you are using the original USB cable that came with your phone, you know how to move around DOS to get to the directory where you downloaded the files, etc.......those lower level tasks are for another thread.
To Try Our Proof-of-Concept Kernel <<<The base of these instructions was the Team Epic Kexec Kernel page seen at this link, Many Thanks to them
Thanks to Invisiblek for clarifying and helping me get steps just right.
The following is an adaptation of the CM Kexec kernel proof of concept with the changes in files and steps necessary to load the latest CM9 work in progress. Be advised I take no credit at all. This is the work of Team Epic and Invisiblek. I just put this together for myself and for others who would like to try it with one caveat. DATA doesn't work! Voice and SMS only....and maybe 1xRtt data.....so you will be relying on WiFi for data! You've been warned!
Also, I highly suggest you use a free MD5 Hash checking utility to verify the integrity of the files you are downloading. That is why the MD5 hash is provided, so you can be sure you didn't get the wrong file or a corrupt download that could cause a BRICK!
If you don't follow the directions carefully you can end up with a brick! Ask questions after reading the OP if you still aren't sure. I probably won't know the right answer for sure. You may have to wait on someone with more experience in this to answer your question.
DO NOT ACCEPT AN OTA UPDATE WHILE RUNNING THIS SETUP
1. Download the recovery.img (MD5: f1c01ad20e02751a73188f173eb412ca), which combines our source-based kernel with our previously released CWM v4.
2. Flash the recovery.img following these instructions, that is:
Code:
adb push recovery.img /sdcard/
adb shell
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18 bs=256k
sync
3. Reboot into recovery (using volume up, home power buttons), wipe data, install one of invisibleks CM9 roms>click here for all of his CM9 roms< which do not have boot.img integrated, then continue with the steps below:
4. Download these additional files:
(required download)boot.img (MD5: db058f4b15df0fa1b9ee04a5c17cf103), which is invisibleks custom boot.img
It would be good at this point to read ahead and determine where you will be loading the next file. Keep in mind if you are in stock recovery and choose to wipe data, this will wipe the internal memory.
if you plan to load onto internal memory download this file boot_emmc_boot_img.zip (MD5: 84a3f98c194f6dedc583dbc75ccc34c2)
or
if you plan to load onto sdcard (ext) memory download this file boot_sdcard_boot_img.zip (MD5: 88904d7e69d455ff88756b4d1ad79aac), which are applied in recovery to kexec (boot) the custom boot.img.
5. Place boot.img either on the internal SD card (the /sdcard/ folder), or on the external SD card (the /mnt/extSdCard/ folder).
The boot.img kernel boots directly out of one of these folders, it will not (and should not) be flashed to the device.
6. If you're using the internal SD card, place boot_emmc_boot_img.zip in /sdcard/ as well. If you're using the external SD card, place boot_sdcard_boot_img.zip in /mnt/extSdCard/.
7. Reboot into recovery.
8. If using the internal SD card, select "Install zip from sd card" and then "choose zip from internal sdcard", then "boot_emmc_boot_img.zip". Alternatively, if using the external SD card, select "choose zip from sdcard", then "boot_sdcard_boot_img.zip".
At this point, the device should reboot "in the middle" of applying the update, temporarily booting boot.img. If the update "completes" and returns to the CWM menu, kexec has failed or the wrong recovery was loaded in the beginning. Please check the locations of boot.img, and boot_emmc_boot_img.zip or boot_sdcard_boot_img.zip and verify recovery.img file used was the correct one, verify using an MD5 hash checker.
9. Once booted, the custom kernel can be confirmed by checking "Kernel version" in "Settings", "About device". It should report:
3.0.8-gdefeb6f
[email protected] #1
SMP PREEMPT Sun Jul 8 04:27:58 EDT
2012
10. To reboot into the stock kernel, select "Restart" from the Power menu, which will actually reboot into CWM recovery. Press the Power button to select "reboot system now" and leave recovery.
11. You cannot simply power on your phone with this setup! In order to power on your phone you will have to hold volume up, home and power to boot into recovery and load the zip file you chose at step 4 where you chose either internal or external memory, so either "boot_emmc_boot_img.zip" or "boot_sdcard_boot_img.zip". If you do accidentally boot up by just hitting power, no big deal, it will give you all sorts of force closes, simply pull battery and boot back up using the Vol up, Home, power method.
If anyone would like to suggest further clarification, please do. To get the stock Google apps such as Play Store get the package HERE and install in recovery
Alternatively a more condensed version of this install procedure has been posted by nbsdx and can be found HERE.
7-15 2:46pm **As of right now voice and SMS are not working on my phone while others are working fine. While you can still play around and see just how amazingly fast CM is on this phone, YMMV. If it doesn't work you need to know how to go back to stock before trying this.
If you want to return to bone stock, simply go to THIS THREAD to get STOCK ROM IMAGE and then put your phone into Odin Download mode by following THIS THREAD and be sure to flash it using the PDA button. It will take a while, probably 20 minutes or so, it will take forever to boot up the first time but you will be on bone stock like new.
Very informative. Would read again.
Sent from my Transformer Prime TF201
dual boot
Being that we have to use kexec anyhow, it would be nice (especially with the state of current cm9 rom) if we could fully dual boot so as to keep stock system and data for stock kernel.
Like here,
http://www.epiccm.org/2012/07/dualboot-cm9-on-sgs3-lte-sprint-t.html
I just installed successfully using the instructions in the OP so I can confirm it works correctly. Holy crap it's fast.
Anybody want to put up a video of how well it runs for us that aren't brave enough to put it on our own phones?
Sent from my SCH-I535 using xda premium
dakalter said:
Anybody want to put up a video of how well it runs for us that aren't brave enough to put it on our own phones?
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I'll leave that part to someone who doesn't sound like a retarded redneck on video.
silasrye said:
I tried to install the vzw cm9 (with with invisiblek's boot.img put back into the zip) via this method exactly.
http://www.epiccm.org/2012/07/dualboot-cm9-on-sgs3-lte-sprint-t.html
fake cwr works, and everything went fine, but when i try to flash boot_cm9.zip i stay in cwr.
I am using the cwr from this post
http://forum.xda-developers.com/showthread.php?t=1773514
I had started with the twrp from that post, but it didn't recognize my internal sdcard.
So, I don't see why this shouldn't be a doable thing. But something probably needs to be redirected somewhere.
The good news is, I boot into my normal rom without problem.
Click to expand...
Click to collapse
If you follow the steps in this thread, including using these links for your files, it will work without a problem.
I can't comment on why other guides on other sites using other files don't work.....and not really sure how it applies to this thread. Lets try to keep it on topic. If you have issues with the dual booting instructions, you might start a new thread to address that or jump in irc.freednode.net/verizons3 and graciously ask the people for help
When you flash the the CM9 rom built by Invisiblek it will come back out to CWR menu. At that point in the process I realized I hadn't copied the boot.img file into the root of my sd card, so i left it on the CWR menu, popped out the sdcard, copied the boot.img file over (already had the boot_sdcard_boot.img file on the root of sdcard), and popped the sdcard back in, chose advanced->reboot recovery, then followed the steps in this guide, worked perfectly.
silasrye said:
I tried to install the vzw cm9 (with with invisiblek's boot.img put back into the zip) via this method exactly.
http://www.epiccm.org/2012/07/dualboot-cm9-on-sgs3-lte-sprint-t.html
fake cwr works, and everything went fine, but when i try to flash boot_cm9.zip i stay in cwr.
I am using the cwr from this post
http://forum.xda-developers.com/showthread.php?t=1773514
I had started with the twrp from that post, but it didn't recognize my internal sdcard.
So, I don't see why this shouldn't be a doable thing. But something probably needs to be redirected somewhere.
The good news is, I boot into my normal rom without problem.
Click to expand...
Click to collapse
You need to add one line to Invisiblek's updater-script that "flashes" the boot.img to the bootloader partition in the multi boot folder. Check out the sprint cm9 install for the line to add.
I have tested dual booting to work perfectly.
is the data not working due to the ril??
suzook said:
is the data not working due to the ril??
Click to expand...
Click to collapse
yes, will update OP once we have working 3G/4G data
as of right now my voice and SMS isn't working while others is.....trying to figure it out
I flashed back to stock, simply because I need to have voice and SMS working. I could deal without 3G/4G data for a little bit and use WiFi, but no SMS/Voice was a deal breaker on my phone. I have to be easily gotten in touch with for work and such. It was fun while it lasted.
Will these same instructions work for the CM10 build that is in the server list?
17akota said:
Will these same instructions work for the CM10 build that is in the server list?
Click to expand...
Click to collapse
No. Different files used, probably a different step or two also. I plan to edit this once CM10 builds are ready for public consumption. These instructions also don't include the automated kexec scripting work done recently that allows your device to cold boot into CM9.
Sent from my SCH-I535 using xda premium
neyenlives said:
No. Different files used, probably a different step or two also. I plan to edit this once CM10 builds are ready for public consumption. These instructions also don't include the automated kexec scripting work done recently that allows your device to cold boot into CM9.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I figured that.
Could you point me in the direction of the new Kexec? I read about it somewhere and would like to try it out.
17akota said:
I figured that.
Could you point me in the direction of the new Kexec? I read about it somewhere and would like to try it out.
Click to expand...
Click to collapse
irc.freenode.net #verizons3
Sent from my SCH-I535 using xda premium
i came from a thunderbolt, and know how different a RIL can be from phone to phone, so i ask this quite seriously...
How different is the RIL from the Gnex to the SGIII?
seang said:
i came from a thunderbolt, and know how different a RIL can be from phone to phone, so i ask this quite seriously...
How different is the RIL from the Gnex to the SGIII?
Click to expand...
Click to collapse
Completely different processors.
Is there anyway to get the TouchWiz Camera on CM9? I really like that camera app.
I tried just putting it in /system/app and changing the permissions to rw-r--r-- and rebooting and nothing
Then i tried just installing it like a normal apk and it failed.
I would love CM9 if i could just get the stock camera app too work.
BTW im using DHacker29's CM9 and its amazing. So much easier to install.
17akota said:
Is there anyway to get the TouchWiz Camera on CM9? I really like that camera app.
I tried just putting it in /system/app and changing the permissions to rw-r--r-- and rebooting and nothing
Then i tried just installing it like a normal apk and it failed.
I would love CM9 if i could just get the stock camera app too work.
BTW im using DHacker29's CM9 and its amazing. So much easier to install.
Click to expand...
Click to collapse
It probably requires touchwiz frame work. It will take significantly more work than just dropping in an apk
Sent from my SCH-I535 using xda premium
DHacker's CM10 is awesome!! I've been running it all day and Jelly Bean is really smooth on the S3.
http://www.droidhive.com/forums/index.php?/files/category/26-sgs3/
Check it out guys.