Database Info

I don't come in the boot loader mode (Jamin is dead)

I try the hard reset but they dont't help.
I don't come in the boot loader mode, only if i connect the device to the power supply it works but now i haven't a connecting to the PC.
If i not connected to the power suppley and press now and hold continuously at the camera button and press the power button once there is now boot loader i see only for one moment
a white screen and also for one moment the blue light in the speaker
if you find this solution of the problem , Please help me !

you have to charge yor battery on another working device then you will be able to entr the boot loader and stay there

try to force BootScreen press and hold comm. manager and reset botton.
Good Luck

Help me O2 Neo

I tested upgrade my O2 neo with RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID.
But when 98% , the upgrade software alert : Can't find file nk.nbf .
And stop.
Now my Neo can't boot , and when i put it in USB, nothing happen .
Anyone can tell me ?????
Sorry for my bad English

Bring your Neo into Bootloader mode (hold CommManager button while you do a Softreset with your stylus) and then plug your Neo into a free USB port at your USB host!
Than you would be able to reflash the ROM or try another one!

i try to press camera + voice dial + soft reset
But nothing happen.

up
to enter to bootloader simply hold camera, and then plug in the usb cable...

Help
I can get it into bootloader by hold camera too .
But when i take the battery out of my phone, the screen just blink 1 time but then turn into black
pls help me !!!!

Cannot escape from Bootloader - pls help! URGENT

I attempted to upgrade my Orange SPV M500 (HTC Magician).
The tool failed, and did not install anything.
However, my phone has remained stuck on the "Bootloader", displaying a white screen with "serial" if it's not plugged into the Pc, or "USB" when it is.
I've tried different reset techniques, having the battery out for long periods.
My phone booted up once, then silly me I tried the same tool again, and am back stuck!!
I bet it's something simple to press to get it to boot normal - but I just can't see it.
Please help. I know I'm in the right place to ask.
Paul.

Bootloader
you can try camera + record + reset button to get it out off boot loader mode
if it doesn't work you have to flash it

If this doesn't work, just download the correct rom, and run the update program, this will hopefully sort the problem out if pressing the buttons doesn't work.
hope this helps
Mark

Does it mean its bricked?

So i just flashed my vox with dr.gonzo's new 1.0 rom...and I did it the same way i've been doing it for months now (since his first rom 0.1) and it all went good, but when it was suppose to reboot turned off but never turned back on....I turn it on manually and i see the htc logo, it vibrates and then black screen... nothing happens afterwards...please dont tell me its bricked...please.....

If you're not able to get it into the bootloader to run an RUU then I suggest that you flash a signed HTC ROM, flash USPL and then re-flash New Guava v1.0

how do i flash a signed htc rom? when i turn it on, the htc logo comes on, then vibrates, and then a black screen.... when i try a hard reset, it asks me to confirm by pressing send. i press send (correct me if i'm wrong, send is the green 'phone' button right?) and it loads up the htc logo, vibrates and then shuts off. I've never had a bricked phone before, this all just doens't make sense i did the same steps that i've always done.

Seriously? Your phone is not bricked.
If you've flash a ROM before, it's the exact same procedure - what you can try and do is load into the bootloader by holding the camera button and plugging in a USB cable, it will start into the tri-color screen and should show USB is connected then you can flash a signed HTC ROM.
If the ROM is corrupt, this is your best way of "recovering" your phone, if the ROM was flashed properly, after getting into the bootloader, run ruurun 0 and ResetDevice to boot it back into OS.

oh ok, i haven't tried that yet (bootloader mode that is). Now you say i do this by plugging the usb and holding the power button and camera button? is that how it works? h4waii, you just lightened up my day by giving me some hope!

That is how you can enter the boot loader.
1). Turn off and unplug the Vox from external power/USB cable
2). Press and hold the camera button
3). Insert external power/USB cable
4). Continue to hold camera button until you enter the tri-color screen
At this point, you should have a "USB" text label on the bottom left hand side indicating USB is detected - you can then run an RUU from a signed HTC ROM to update it.

press and hold the camera button alone? i tried that, it doesn't power up the unit though?

Yes it does. Hold camera and plug in your USB cable (making sure it's also plugged into your computer).

ok i got it to the triband screen, but when i ran dr.gonzo's rom it got to 3% and said its corrupt. so i'm gonna do what you said and flash a signed htc rom. hopefully it works....

Yes, 3% because SPL is not patched to allow an unsigned ROM to be loaded, flash an HTC ROM to it, once that is complete you can run USPL to re-flash New Guava.
It will work, don't need to hope

you are a godsend! literally have no idea how depressed i was yesterday! being a university student money is very tight right now so was a total shock when i realized i bricked my $350 phone....I wish i had money cause i'd send you some for being so helpful but I dont... So just please understand i REALLLY appreciate your help, thank you.

That's what we're here for. Glad to be of service.

My phone does not Boot, Help!!!

Hi,
my Imate JAMA (P30) doesn't boot, it reamins stuck up at the imate screen and then screen goes blank and nothing happens even if i press any key it appears to be off and turn back on only if i remove and reinsert the battery.
i've tried hard reset by pressing the Volume(-) and the Red hang up button but in vain.
even when i connect USB cable to my device, it is not deteced by my PC nor by AciveSync.
what should i do?
Please Help !!!

ravisharma said:
Hi,
my Imate JAMA (P30) doesn't boot, it reamins stuck up at the imate screen and then screen goes blank and nothing happens even if i press any key it appears to be off and turn back on only if i remove and reinsert the battery.
i've tried hard reset by pressing the Volume(-) and the Red hang up button but in vain.
even when i connect USB cable to my device, it is not deteced by my PC nor by AciveSync.
what should i do?
Please Help !!!
Click to expand...
Click to collapse
welcome to the forum
Please READ the Wiki, you`ll find a lot of usefull information

i'm new here, please explain I din't get wht do u mean by "Please READ the Wiki"...

http://wiki.xda-developers.com/

Your battery may be dying. Try a new one.

Naa, I've charged the battery still the same problem

whats the status. i have the sme prob. what can i do now??