Database Info

My i-teq X-bond is Dead

Hi All,
While Upgrading My i-teq x-bond ROM...
I Followed the Steps but after Checking the Image...
I Reset My Phone...
Now it doesn't response, I can only see the light when I'm charging the Phone!!!
Nothing else response...
I tried to Press (Call+End Call+Power) again to ReInstall the ROM But it also doesn't Response...
Also I want to know how to Enter Bootloader???
and How to enter the Engineering Mode???
Thanks
i am mohsen from iran tehran

s_m_s said:
Hi All,
While Upgrading My i-teq x-bond ROM...
I Followed the Steps but after Checking the Image...
I Reset My Phone...
Now it doesn't response, I can only see the light when I'm charging the Phone!!!
Nothing else response...
I tried to Press (Call+End Call+Power) again to ReInstall the ROM But it also doesn't Response...
Also I want to know how to Enter Bootloader???
and How to enter the Engineering Mode???
Thanks
i am mohsen from iran tehran
Click to expand...
Click to collapse
you can press start + ok + reset. it will help you recover your pda

salam
salam agha mohsen man ham moshkele shoma ro daram agar dorostesh kardin man ro ham khabar konid. 09195388556
ghorboone dastet

please help me out
Hi All,
While Upgrading My i-teq x-bond ROM...
I Followed the Steps but after Checking the Image...
I Reset My Phone...
Now it doesn't response, I can only see the light when I'm charging the Phone!!!
Nothing else response...
I tried to Press (Call+End Call+Power) again to ReInstall the ROM But it also doesn't Response...
Also I want to know how to Enter Bootloader???
and How to enter the Engineering Mode???
Thanks

SKYWOR said:
Hi All,
While Upgrading My i-teq x-bond ROM...
I Followed the Steps but after Checking the Image...
I Reset My Phone...
Now it doesn't response, I can only see the light when I'm charging the Phone!!!
Nothing else response...
I tried to Press (Call+End Call+Power) again to ReInstall the ROM But it also doesn't Response...
Also I want to know how to Enter Bootloader???
and How to enter the Engineering Mode???
Thanks
Click to expand...
Click to collapse
wait we need more Details id you try leaving the phone charging then take battry out and put it back in? also does the Device power on? I mean do you see the qtex screen you know the boot screen? also try putting it in bootloader mode then flash

Same Problem
I have been facing the same kind of problem. The phone light flashes when charging and when I boot the phone, it just shows the iteq logo. I have tried the Call Start+Call end+power combination but nothing happens. Sometime it shows the orange light besides the power button but the logo still remains on the screen. On one ocassion, it did enter some image mode but gave an error that no image found. I dont have the rom either to flash it. Can someone please post the rom online if they have it and also help if they have faced similar issues.

Iteq X-bond
try
Windows flag button (Start)+OK+reset
if it doesn't work then install new windows

reseting
1 press and hold the [WIndosFlag(start)] and [ok] buttons somultaneously
2 press and release the [reset] button
3 wait up to the leds in the keyboar flahsing 2 or 3 time (less tha 5 seconds)
4 release the [WIndosFlag(start)] and [ok] buttons
must be start the resetting to the fabrique settings
[WIndosFlag(start)] button is in the down left corner
[ok] button is in the down right corner
if this not works the the keypad is dammage

iteq x-bond totally drained battery
When the battery is totally drained, all you have to do is charge it. Now here is the tip. when you charge it(totally drained iteq x-bond battery), the phone will enter into pre-charge mode for about 30min to 2 hrs( depending on how drained the battery is), the end-call button together with the right double arrow button will light steadily. Do not on the unit as this will only aggrevate the problem. Wait until the phone passes through that pre-charge mode. When the end-call button starts to flash, that means the pre-charge period is over. You can now press and hold the on/off button for about 5 seconds and the phone will start-up normally. Your problem is solved. That's it. This procedure will work only on the presumption that you did not do anything on the phone beforehand such as upgrading etc....

I-mate Jama P-30 stuck on startup screen.

i have a brand new imate jama p30 stuck on startup screen.when i insert the battery into device it is getting switchh on automatically,without pressing the power button,but getting stuck on startup screen and remained till i do not remove the battery.I tried to connect with pc but pc not able to detect at all.
help me to solve the problem.if i can in anyway repair via software then please do post the link for the ROM.
Wbr,
Moderate.

Same to me how to flash and which software and file...........

moderate said:
i have a brand new imate jama p30 stuck on startup screen.when i insert the battery into device it is getting switchh on automatically,without pressing the power button,but getting stuck on startup screen and remained till i do not remove the battery.I tried to connect with pc but pc not able to detect at all.
help me to solve the problem.if i can in anyway repair via software then please do post the link for the ROM.
Wbr,
Moderate.
Click to expand...
Click to collapse
brother i have same phone and same problem plz tell me how u solved?
w.b.r

I have the same problem... isn´t there a No_vender ROM for the magitian anywhere?
Please help us...

I got the sace case here,isn't there anyway to take this phone in bootloader mode or any guide telling us about solution for this phone?
Moderators plz give us small tips

Looks like no one cares about our problems...
I´m starting to be very desapointed with this forum...

hey ho?
how long did You wait for it to 'resolve'?
What type of SD card You have (or not)?
I'm a newbie on Magician too

here is the video just take a look
http://mygsmtube.com/videos/198-imat...set-howto.html
stuck on startup i- mate jama 100% solve with hard reset,
remove battery, and hold press volume down(-) and power on button siment...
insert battery, when led on, realese buttons. wait few min.
reseted 100% work for me.

Remove Memory Card and then Hard Reset Then . set will be ok if problem is stuck on boot screen.. with Red Light..
and when u r done .. any time set restarts remove memory card to set work properly .. after set starts then put ur sd card in..

i did so but same problem . nothing happened, i think imate should ve something else to do rather than manufucturing pda, , imate: pls give up, its over

Did I brick my TilT?

Hello,
I am fairly new to loading roms, but I have done it already several times successfully both on keiser and wizard,
now Yesterday I wanted to try Dutty's V1 rom and I did, now when it completed it started to boot, with the htc splash screen customized with Dutty's name etc, then it asked me to calibrate the pen, you know the normal stuff.....then it stopped booting it will get stuck into a white screen,
and it stays there, it will not active sync, it starts fine, I read: R 1.65.16.24
g 25.83.40.02W D 3.5Dutty's . then it gets into this white screen and stays till the backlite goes off, if I tap the screen the backlite goes back on, and one time I was able to hold the off button and I got even a message saying " if you disconnect them you might lose some data, continue yes or no". Tapping no or yes made no difference.
Please Help, I need to enter bootloader in some way, please help !

can you enter bootloader mode?
keep the camera button pressed and soft reset with ur stylus....or turn off ur phone and keep the camera button pressed and press the power button of ur device...
if you can enter bootloader mode...just reflash dutty's rom or maybe flash some other rom and you should be fine

Once it started to calibrate the stylus is when you Hard reset.

Please Help, I need to enter bootloader in some way, please help !
Click to expand...
Click to collapse
You definately need more lecture.

i've killed my magican in a very way(

Good Day!
i made a very stupid mistake. i tried to update my Magician with Wizzard ROM.
The process went good, all the steps had been done perfectly, but my MDA crashed totally. The only think, that's happening when i'm pressing on/off button is a once instant flash of display.
I know, that's is too naive from my side to think that there is any hope, but anyway: is there any way how to solve this problem?

pls help me
i was trying to upgrade my magician rom but it stopped in midway. it is showing a dark display and mention Serial on to and v1.00 at bottom.
pls help me how to give life to my pda. have tried to soft and hard reset but didnt work. thanks

do u able to start bootloader (POWER +CAMERA hold and press reset)

Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
I am having the same problems as bplb71....
No way to do a HardReset or Leave bootloader.... It got stuck
Now what??

Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
found a mgician and it starts but hangs o the align screen
the thing you need to press keeps moving arround the screen for 20 min and then i stopped

i am also having the same problem.,, cant enter the bootloader or hard reset ,,,,,magician is stuck now,,, what should i do now???? i am worried.

happend to me to
i have same problem but when i let battery run out and then plug into wall it boots normally but then it asks to restarts after setup and back to square one help plz

pb with htc herme 200

hi
i have probleme with my htc herm200 dont sart when i hold power button, and it give me led green but the screen stay black and dont start, and usb is not detected on pc, but when i hold three button power+ok+reset it give me bootloader mode herm200 IPL-1.04, HERM200 SPL-2.03, USB, i have tried to re flash it, but it start a 1% and stop and return to black screen and it give me the image is currupted, please check your update utility
please how to fix that , helpme
thanks