I-mate Jama P-30 stuck on startup screen. - JAM, MDA Compact, S100 Software Upgrading

i have a brand new imate jama p30 stuck on startup screen.when i insert the battery into device it is getting switchh on automatically,without pressing the power button,but getting stuck on startup screen and remained till i do not remove the battery.I tried to connect with pc but pc not able to detect at all.
help me to solve the problem.if i can in anyway repair via software then please do post the link for the ROM.
Wbr,
Moderate.

Same to me how to flash and which software and file...........

moderate said:
i have a brand new imate jama p30 stuck on startup screen.when i insert the battery into device it is getting switchh on automatically,without pressing the power button,but getting stuck on startup screen and remained till i do not remove the battery.I tried to connect with pc but pc not able to detect at all.
help me to solve the problem.if i can in anyway repair via software then please do post the link for the ROM.
Wbr,
Moderate.
Click to expand...
Click to collapse
brother i have same phone and same problem plz tell me how u solved?
w.b.r

I have the same problem... isn´t there a No_vender ROM for the magitian anywhere?
Please help us...

I got the sace case here,isn't there anyway to take this phone in bootloader mode or any guide telling us about solution for this phone?
Moderators plz give us small tips

Looks like no one cares about our problems...
I´m starting to be very desapointed with this forum...

hey ho?
how long did You wait for it to 'resolve'?
What type of SD card You have (or not)?
I'm a newbie on Magician too

here is the video just take a look
http://mygsmtube.com/videos/198-imat...set-howto.html
stuck on startup i- mate jama 100% solve with hard reset,
remove battery, and hold press volume down(-) and power on button siment...
insert battery, when led on, realese buttons. wait few min.
reseted 100% work for me.

Remove Memory Card and then Hard Reset Then . set will be ok if problem is stuck on boot screen.. with Red Light..
and when u r done .. any time set restarts remove memory card to set work properly .. after set starts then put ur sd card in..

i did so but same problem . nothing happened, i think imate should ve something else to do rather than manufucturing pda, , imate: pls give up, its over

Related

My phone does not Boot, Help!!!

Hi,
my Imate JAMA (P30) doesn't boot, it reamins stuck up at the imate screen and then screen goes blank and nothing happens even if i press any key it appears to be off and turn back on only if i remove and reinsert the battery.
i've tried hard reset by pressing the Volume(-) and the Red hang up button but in vain.
even when i connect USB cable to my device, it is not deteced by my PC nor by AciveSync.
what should i do?
Please Help !!!
ravisharma said:
Hi,
my Imate JAMA (P30) doesn't boot, it reamins stuck up at the imate screen and then screen goes blank and nothing happens even if i press any key it appears to be off and turn back on only if i remove and reinsert the battery.
i've tried hard reset by pressing the Volume(-) and the Red hang up button but in vain.
even when i connect USB cable to my device, it is not deteced by my PC nor by AciveSync.
what should i do?
Please Help !!!
Click to expand...
Click to collapse
welcome to the forum
Please READ the Wiki, you`ll find a lot of usefull information
i'm new here, please explain I din't get wht do u mean by "Please READ the Wiki"...
http://wiki.xda-developers.com/
Your battery may be dying. Try a new one.
Naa, I've charged the battery still the same problem
whats the status. i have the sme prob. what can i do now??

i've killed my magican in a very way(

Good Day!
i made a very stupid mistake. i tried to update my Magician with Wizzard ROM.
The process went good, all the steps had been done perfectly, but my MDA crashed totally. The only think, that's happening when i'm pressing on/off button is a once instant flash of display.
I know, that's is too naive from my side to think that there is any hope, but anyway: is there any way how to solve this problem?
pls help me
i was trying to upgrade my magician rom but it stopped in midway. it is showing a dark display and mention Serial on to and v1.00 at bottom.
pls help me how to give life to my pda. have tried to soft and hard reset but didnt work. thanks
do u able to start bootloader (POWER +CAMERA hold and press reset)
Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
I am having the same problems as bplb71....
No way to do a HardReset or Leave bootloader.... It got stuck
Now what??
Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
found a mgician and it starts but hangs o the align screen
the thing you need to press keeps moving arround the screen for 20 min and then i stopped
i am also having the same problem.,, cant enter the bootloader or hard reset ,,,,,magician is stuck now,,, what should i do now???? i am worried.
happend to me to
i have same problem but when i let battery run out and then plug into wall it boots normally but then it asks to restarts after setup and back to square one help plz

[Q] !! HELP

I have try to install PG58IMG.zip to ugrade software and bootloader die!
I cant go into recovery..
Do anyone knows what to do.. I both the phone today dont have waranty..
When i turn on phone its stuck on white screen and HTC sign..
Sorry 4 my english i am from serbia
Try this
Take battery out remove SD card.
Then switch on holding volume down button, to get to bootloader
Then hopefully recovery
keep taking out the battery (as said above) keep at the sometimes like a pc phones take a hissey fit and wont turn on for up to an hour after this then your in trouble

Error Flash_tool 'Obtain DRAM Failed'! [Tinji i9300]

Hello, I've been the whole day reading about this problem, and didn't found anything, have been 8 hours trying to restore my phone, but unsucsefully.
I've tryed to install a Custom ROM on my Tinji 9300, but I selected to Flash the "PRELOADER" option, and now I'm unable to fix it...
The device connects to the PC in Recovery Mode pressing Volume UP & Volume Down & Home & Power Button and being the battery unplugged. After I plug the USB and the the Battery and recognizes the phone, it's not totally Bricked. The Screen doesn't light up and nothing happens, but it writes on FlashTool.
I attached the screen of the error, I don't know what to do anymore, I am very tired and don't have any ideas...
This is the exact model I bought:
aliexpress(dot)com/item/Newest-Tianji-i9300-S3-MTK6577-Android-4-1-1-3G-Smartphone-512MB-4GB1-2GHz-4-6/709668717.html
Thanks for your help guys...
Please, someone help.
I experinced the same error message while trying to flash Alcatel OT 918..searched for solution but never got any.
At last i flashed a custom ROM(Andread 2.0) which worked after attaching a new IMEI coz at first phone couldn't connect to network due to IMEI issue.
But then my phone can't go back to the original ROM.
If u find help on the DRAM error please share.
enne92 said:
Hello, I've been the whole day reading about this problem, and didn't found anything, have been 8 hours trying to restore my phone, but unsucsefully.
I've tryed to install a Custom ROM on my Tinji 9300, but I selected to Flash the "PRELOADER" option, and now I'm unable to fix it...
The device connects to the PC in Recovery Mode pressing Volume UP & Volume Down & Home & Power Button and being the battery unplugged. After I plug the USB and the the Battery and recognizes the phone, it's not totally Bricked. The Screen doesn't light up and nothing happens, but it writes on FlashTool.
I attached the screen of the error, I don't know what to do anymore, I am very tired and don't have any ideas...
This is the exact model I bought:
aliexpress(dot)com/item/Newest-Tianji-i9300-S3-MTK6577-Android-4-1-1-3G-Smartphone-512MB-4GB1-2GHz-4-6/709668717.html
Thanks for your help guys...
Click to expand...
Click to collapse
u need this file!!!!!
s3d12-27.rar

Help: Black screen sm g7102 home button led lights working..

Hello guys im facing a problem in my sm g7102 when i turning on thers a sound like boot up a samsung logo but black screen only the led lighs showing in between of the home butoon.... What should i do can you help me guys...many tnx..
guys need help here...
heres the scenario my smg7102 got dead boot with the help of debrick.img my smg7102 get ready to flash a stock rom ..
with the help of odin i flash the stockrom sucessfully and shows pass....
when i turning on my phone by pressing the power button at least 10 sec. i hear a start up sound and the light led on and also i can hear a sound when im touching the touch screen... pls guys im having this issue since 1 week now to figure out what the main pbroblem why still my screen is not turning on shows black screen ...
one more thing when i plug the usb yo my pc i canhear a sound charging and connected but still black screen..
my pc detect my phone but i cant see the internal storage in my pc ...
guys i need your help badly....
sorry for my bad english hope you can understand what happening here...
thanks and more power..

Categories

Resources