"Sorry for my english"
I have flash my G4 xda Neo with "pdamobiz.com_downgrade_and_unlockcid Rom"
and Now i can´t do nothing more... i can´t make a Hardreset (stock in first Dopod Picture) and in the 3 color modus don´t want upgrade saysROMUpdateUtility : the connectoin failed Update Error (260)
is my Neo now Dead ???
please help me anyone for a solution !!!
Press just the camara button and do a reset, do you see a usb bottom left?
JD
rodigezstyle said:
"Sorry for my english"
I have flash my G4 xda Neo with "pdamobiz.com_downgrade_and_unlockcid Rom"
and Now i can´t do nothing more... i can´t make a Hardreset (stock in first Dopod Picture) and in the 3 color modus don´t want upgrade saysROMUpdateUtility : the connectoin failed Update Error (260)
is my Neo now Dead ???
please help me anyone for a solution !!!
Click to expand...
Click to collapse
for my dopod 818 pro, you hardreset like this:
Press and hold Camera and Comm Button
Press reset button
Con't to hold Camera and comm button until a screen pop up ask you to "Restore to Factory Setting".
Release the Camera and Comm button
Press Dial (might need to press twice or something)
You can goto the Boot mode by pressing the camera button and press reset...then you should be able to re-flash
thank you all very much i have found the problem...
the USB driver was away.. i have insalled a new Active sync and the problem with upgrade was solved...
After ROM 5.35.05 AKU 3.5.2 upgrading my jasjar Stuck .. no Display Blank Screen can't Enter a Bootloader .. when i plug usb messege display USB NOT RECONGNIZED ... tried to press power + backlight + stylus .. not entring in bootloader only red light when i push botton ... have any solution ? ore its dEad End ?
FarhanJ said:
After ROM 5.35.05 AKU 3.5.2 upgrading my jasjar Stuck .. no Display Blank Screen can't Enter a Bootloader .. when i plug usb messege display USB NOT RECONGNIZED ... tried to press power + backlight + stylus .. not entring in bootloader only red light when i push botton ... have any solution ? ore its dEad End ?
Click to expand...
Click to collapse
Hi,
remove battery for 5 mins, remove sd card.
Insert battery, hold backlight button and power on.
Device should now enter bootloader and you can reflash.
Cheers,
Beasty
Hi ,,
Thx for reply ...
i remove battery for Night , remove sd card.
Insert battery, hold backlight button and power on.
No Change... Still Blank Scren ...
Same
Are you sure your battery have some volts
Yes.. 100% Sure battery have volts I have 2 Batterys..
AFTER UNLOCK NO VOICE OR SPEAKER WORKING I JUST FLASHED WITH
(RUU_Kaiser_HTC_WWE_1.25.405.0_22.39.82.00.b_1.27.04.15_Test) NOW PHONE DOESNT
POWER UP OR BOOT MODE BLANK SCREEN
I TRY TO CONNECT TO THE COMPUTER ASKING DRIVER (DATE INTERFACE)
I NEED YOUR HELP TO GET BACK LIVE
PLEASE
THANKS
How did you unlock it? Did you CID unlock? HardSPL version? Can you get to the bootloader by holding down the camera button and power button and soft reset at the same time?
From the sound of things you loaded a CID locked rom onto your locked phone. This is only a guess though based on the fact that the ROM you loaded included a compatible radio.
Just a tip, next time don't use all caps. It's considered shouting and inappropriate. We understand your urge to get it fixed so we'll help even without the caps
Answering Alibaba0101's questions will help a lot. Also, have you tried taking the battery out and putting it back in?
The phone was on orange.
Step 1: install JumpSPL1.93-KAIS.exe
Step 2: Run KaiserUnlocker.exe (PolarisUnlocker)
Step 3: Flash Hard-SPL (but the screen goes white then i boot the phone manually by pressing camera button) after done.
Step 4: Run unlock Radio (take couple of mint and done and phone reboot)
Step 5: Run Unlocker ( after run unlocker i get 2 option unlock and super cid 000000 and I click checked both option and press okay its take less then 1 mint done.
Step 6: i take it out battery from the phone put different sim card and power on the phone phone was unlocked when I dial help line i didn’t get any sound. No speaker no ear sounds.
then i flashed (RUU_Kaiser_HTC_WWE_1.25.405.0_22.39.82.00.b_1.27. 04.15_Test) and after done flash phone dead screen blank I try to boot the phone by pressing camera button but phone not responding after connect the usb to phone get msg (DATA INTERFACE) driver.
Phone still dead i try to put another battery but still same I did try soft reset hard reset but still dead
Please help
THANKS
lxa786 said:
The phone was on orange.
Step 1: install JumpSPL1.93-KAIS.exe
Step 2: Run KaiserUnlocker.exe (PolarisUnlocker)
Step 3: Flash Hard-SPL (but the screen goes white then i boot the phone manually by pressing camera button) after done.
Step 4: Run unlock Radio (take couple of mint and done and phone reboot)
Step 5: Run Unlocker ( after run unlocker i get 2 option unlock and super cid 000000 and I click checked both option and press okay its take less then 1 mint done.
Step 6: i take it out battery from the phone put different sim card and power on the phone phone was unlocked when I dial help line i didn’t get any sound. No speaker no ear sounds.
then i flashed (RUU_Kaiser_HTC_WWE_1.25.405.0_22.39.82.00.b_1.27. 04.15_Test) and after done flash phone dead screen blank I try to boot the phone by pressing camera button but phone not responding after connect the usb to phone get msg (DATA INTERFACE) driver.
Phone still dead i try to put another battery but still same I did try soft reset hard reset but still dead
Please help
THANKS
Click to expand...
Click to collapse
I don't see the step where you flashed your original radio back after doing the SIM unlock. The radio that you is a special "patched" radio, and the phone will not successfully boot into Windows with it flashed.
Go into the bootloader (hold Camera during power on), and flash a compatible radio. If you haven't flashed a cooked ROM yet, then just hit up the Kaiser Wiki and grab the original ship radio for your phone.
Bootloader is entered by holding the power button and camera button down while soft resetting the phone. (sticking the styles in the hole) Keep holding the 2 buttons down until your in bootloader. Even with the wrong radio the phone should still go into bootloader properly
austinsnyc said:
Bootloader is entered by holding the power button and camera button down while soft resetting the phone. (sticking the styles in the hole) Keep holding the 2 buttons down until your in bootloader. Even with the wrong radio the phone should still go into bootloader properly
Click to expand...
Click to collapse
huh. I don't have to hold down the power button to enter the bootloader. I just hold down the camera button and put the stylus into the reset hole.
Boot Loader
Same here I just hold down camera button and soft reset works every time.
hi I need your more help how can I get phone on boot mode phone dead not responding I tried more then 10 time by pressing camera and power button phone still blank screen.
No display show so how can I flash the phone
Any idea to flash the phone dead mode?
thanks
If you cant get it into boot loader mode, ur gonna have a lot of trouble trying to fix it. Like everyone has said so far... Press and hold both the Power button and Camera button together and then use your stylus to soft reset it.
This has gotten people in the past, so sorry if it sounds dumb.
The Camera button has two settings Full Press and Half Press. Press until it stops then press again. You need to be pushing the Camera Button down all the way to get into Bootloader.
Also I never need to press the power Power Button As well.
I may be wrong but, when the phone is on, you can press the Camera and Soft Reset buttons. When the phone is off, you press the Power, Camera, and Soft Reset buttons to go directly into boot loader.
i tried but screen still blank no light nothing when i put usb into the phone asking driver (data interface)?
Can not go in bootloader help?
Tytn 2 is dead .
Ok last night I try to install the new hyperdragon III BlackStone rom everything is fine untill it finish and it cant load in to window, the computer keep asking me for the data interface and the tilt keep restart and the screen only shows hyperdragen III. I was running hyperdragon III opal (10/11/08) I tried MMTY and reinstall the OE rom but no luck, please help!!
Tytn2 Dead or not??
Tytn 2 is dead if you see data interface driver when put in usb cabel install v3 motorola driver and you will see data qualcomm usb driver i device manager .... this mean that totaly erased memory in tytn2 and its dead,only with jtag can flash again.
Please, tell me how can y do it. I have the same problem....
Step 3: Flash Hard-SPL (but the screen goes white then i boot the phone manually by pressing camera button) after done.
Click to expand...
Click to collapse
I don't see any step about using the white screen fix so I'm guessing you didn't successfully install HardSPL and then after that you tried flashing a ROM whilst being oblivious to the fact that Hard SPL wasn't installed, so you most likely bricked your phone
AllTheWay said:
huh. I don't have to hold down the power button to enter the bootloader. I just hold down the camera button and put the stylus into the reset hole.
Click to expand...
Click to collapse
Dead HTC KAISER
Hello My friends
After along search and Googling on the net without finding any solution. at last I did took a Risk to solve and save my DEAD HTC KAISER . what i did is I ressembled the HTC KAISER , to see if my USB data input was defect, but it was Good, now .......he he.. what i fond avery smal Batterie planted on the motherboard , i took it of the the board , end waited 1 hour . then i place it back , assembeled my HTC KAISER back
Taaaaraaaaa my HTC KAISER Power Led went ON ,,, YES ..Friends . is charging .
after 1/2 hour , I swish the HTC on ,,,, heeeee Is working......flash it with the new ROM wm 6.5 ...really it went Perfect.. end My HTC KAISER... ALIVE AGAIN.
Greatins , and hoppe this will Help you..........Good Luck .
on youtube you can find videos how to dissembele your HATC KAISER.
thanks to XDA-Developers , for this great Forum.
ericc191 said:
If you cant get it into boot loader mode, ur gonna have a lot of trouble trying to fix it. Like everyone has said so far... Press and hold both the Power button and Camera button together and then use your stylus to soft reset it.
Click to expand...
Click to collapse
my kaiser boots up but after the att thing the screen gos black do you know how to fix this
Hi all,
I was performing CID unlocking on my device, followed all the steps till 6 and now when it asked me to press any key.. and i did..and now after the soft-reset i cant go over that blue IMATE screen.. where the IPL,SPL are shown.. need quick help!
what should i do next?
Try to go to the bootloader (reset + hold the camera button during softreset), connect to PC with a usb cable , sound notification (recognized USB) should be heared.
Now try to flash some original ROM - just run the upgrade utility
hi
i have probleme with my htc herm200 dont sart when i hold power button, and it give me led green but the screen stay black and dont start, and usb is not detected on pc, but when i hold three button power+ok+reset it give me bootloader mode herm200 IPL-1.04, HERM200 SPL-2.03, USB, i have tried to re flash it, but it start a 1% and stop and return to black screen and it give me the image is currupted, please check your update utility
please how to fix that , helpme
thanks