I have a B70 Transformer and I was trying to root it with Brk's script. When I try to do any operation I hear the Device disconnected sound in Windows and some random hex error "0xblahblah: Device not connected" and then my TF is just off and it will turn on like normal. Is this what is happening to everyone with the new BL? Or am I an idiot and have missed something?
I just rooted my b70 last night with the same method...what operation are you trying to perform?
Sent from my Transformer TF101 using XDA Premium App
Some where along the B70 production line, the SBK was changed.
So not all B70 can work with nvflash
Sent from my Transformer TF101 using Tapatalk
baseballfanz said:
Some where along the B70 production line, the SBK was changed.
So not all B70 can work with nvflash
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
It's does not sound like the normal error of locked bootloader models. I am not positive though.
Sent from my Transformer TF101 using XDA Premium App
I tried them all. I just tried to backup but images just then and still happening. This is the exact error that I get:
Code:
Loading bootloader to Pad... please wait....
Nvflash started
rcm version 0x4
Command send failed (usb write failed)
Then I hit yes to backup root (just to see what would happen) and I get:
Code:
Nvflash started
[resume mode]
connection failed NvError 0x30011
The system cannot find the file specified.
This means your bootloader is locked. Join the club :-(
Related
Hello,
I'm trying to use NVFLASH to install a ROM to my transformer but the .bat file runs and just closes and disconnects my Transformer from APX mode. Can anybody help me here?
whats your serial nmber? if its higher than b70kas about there not sure exactly it wont work so if you have a b80 or b90 it wont work
I tried using NvFlash for my transformer with S/N starting with B70 and the windows.bat file didn't work.
But good thing I still had clockworkmod to flash a new rom which saved my transformer from being a brick.
Sent from my Nexus S using XDA App
I have a B70 transformer (just 20 days old). Rooted with universal rootkit.
Wanted to install Ubuntu[emmc install].
Checked sbk version using sbkcheck uitlity. It first gave sbk version 1.
So went ahead Ubuntu install. Could'nt complete beacuse of "connection failed nverror 0x8".
So again ran sbkcheck utility. Got some error cant remember.
and now i cant do anything.
Just displays Entering NvFlash recovery mode when plugged in to usb.
Tried nvflash unbbricking gives "USB device not found"
Please Help!!!
You can try to use NVFLah unbricking method.
http://forum.xda-developers.com/showthread.php?t=1123429&highlight=nvflash
Tried nvflash unbbricking tool it gives "USB device not found"
I just ran into something along these lines too, accept i was installing the ICS alpha build.
I used the NvFlash from the revolver 3.11 thread to get back to a working state at least
Download link to NvFlash:
http://www.multiupload.com/PFMWB39SK4
Just run flash.bat
1pratham said:
I have a B70 transformer (just 20 days old). Rooted with universal rootkit.
Wanted to install Ubuntu[emmc install].
Checked sbk version using sbkcheck uitlity. It first gave sbk version 1.
So went ahead Ubuntu install. Could'nt complete beacuse of "connection failed nverror 0x8".
So again ran sbkcheck utility. Got some error cant remember.
and now i cant do anything.
Just displays Entering NvFlash recovery mode when plugged in to usb.
Tried nvflash unbbricking gives "USB device not found"
Please Help!!!
Click to expand...
Click to collapse
do you get the transformer into apx mode at all?
Thanks for your replies
Got nvflash unbricking tool working from windows. Don't know why it wasnt working on linux.
All fine now.
Just to make sure, since the unbricking tool worked, does it mean I have a sbkv1 device?
Yes you have sbk v1
I have a similiar problem. But i have an 3G model (TF101G), and its not mine its from a friend.
When i power on it only gets to the Eee pad Logo, than it stays there.
Can get into the wipe menu, where you can choose between wipe and "cold booting Linux", but cant get into asus recovery menu (Android Guy with gears).
Tried also nvflash with Windows and Linux, but everytime error "0X4".
my SN begins with "BA0K", so probably a SBKv3 device or?
But i cant be brick! there must be a way, because i can get into the Asus wipe menu and into APX-Mode. Everytime here in the forum its said that this is not really a brick, but perhaps though?
I hope not.
Or have i to be wait until the SBKv3 key will released?
pls help me
When i power on it only gets to the Eee pad Logo, than it stays there.
Can get into the wipe menu, where you can choose between wipe and "cold booting Linux", but cant get into asus recovery menu (Android Guy with gears).
Tried also nvflash with Windows and Linux, but everytime error "0X4".
Click to expand...
Click to collapse
@knopper84
That's exactly my problem , except I have the non-3G model (TF101). I'm currently downloading munsterrr's solution:
Download NvFlash revolver:
Just run flash.bat
Click to expand...
Click to collapse
Hope it will work . You should try it too.
[EDIT: Just tried munsterrr's solution. It didn't work at all. I guess I'll just wait for you guys to find a solution ]
Regards,
HorClok.
hmm i think i have tried it yesterday. Its this file ( http://www.multiupload.com/PFMWB39SK4 ) or? it gave me the same error (0X4)
For me it looks like exactly the same nvflash + bat like usual.
Or maybe is there something different there?
Which SBK you have? I think SBKv1 or?
IDK what SBK is...
I thought there was something different there.
i still tried the SBKcheck util on Linux-Live CD. It worked with "sudo", but i get SBKv1.
I think that is only because of the tool, because i have an 3G Model or?
knopper84 said:
i still tried the SBKcheck util on Linux-Live CD. It worked with "sudo", but i get SBKv1.
I think that is only because of the tool, because i have an 3G Model or?
Click to expand...
Click to collapse
Couldn't tell you, I don't use Linux.
So the Mac Version of the sbkcheck util works better?
Horclok said:
Couldn't tell you, I don't use Linux.
Click to expand...
Click to collapse
You have a B80 according to your other thread. This mean nvflash won't work.
knopper84 said:
i still tried the SBKcheck util on Linux-Live CD. It worked with "sudo", but i get SBKv1.
I think that is only because of the tool, because i have an 3G Model or?
Click to expand...
Click to collapse
If I remember correctly, 3G models have the SBKv3 but it reads as SBKv1.
Sent from my Transformer TF101 using XDA App
Hi, I know there are many threads with this particular problem, I did my research and I find this kinda strange (Iam also desperate...)
Long story:
Ive been swapping between official ROM and customs like a madman and Ive always rooted using this method (downgrade, then vipermod), but this time I accidentaly tried to enter recovery at first boot and since then Iam stucked at "EEE Pad" logo with half full progress bar.
tl;dr summary:
no adb
C10 transformer, sbkv2
no recovery
on boot w/ volume down it says 8.6.6 - the one Ive downgraded to; It also says "checking for ota recovery"
sucessful APX mode connect, universal drivers
When using standard nvflash ROM the process is terminated with "write error" message and disconnects the transformer - sbk2 problem, so Ive tried EasyFlasher which utilizes Wheelie for B70+ devices and the exact same thing happens (well, console and GUI says that everything is OK, but when the nvflash is getting ready the device gets disconnected too). There are many people saying in the thread that Wheelie helped them with basically the same problem...
Now Iam downloading linux to try Wheelie manually.
Any ideas how to fix this or I can pretty much toss my transformer out of the window?
Thanks for replies.
nevermind, Iam an idiot - did not realised that I actually have TF101G so sbkv3 and no nvflash for me
so, do you know if there is any "nvlash-for-sbkv3" project in progress?
I have a tf101 that I rooted and everything was fine then I did a factory restore. After that it would no longer connect to pc. Comes up with the 43 error no amount of drivers will get it to pull up. I tried Ubuntu just hoping maybe it would see it. Nothing. I read downloading and updating a stock rom from Asus would fix it so I tried that now I have no usb, no root, no recovery at all. I am stuck. Any suggestions? Thank You.
Sent from my Transformer TF101 using xda app-developers app
Sounds like a bad USB cable.
It may charge, but it may not work for data transfer.
Did you type lsusb in Ubuntu to see if it shows nvidia. Or is it Asus. I forget. Anyway if it shows you can download the ics stock. Rom here in the forums. Then depending which sbkversion (sbk1/sbk2) you should be able to use nvflash for sbk1 or wheelie for sbk2. I think sbk2 is b80+
wheelie I think works for both. Just execute the appropriate script. Put the wheelie files in the roms folder. I assume that means you must unzip it first. I hope it works for you. Then you can root it again etc.
I forgot to mention the tablet must be in apx mode (power+volume up screen goes black) . If you have windows and not Ubuntu I think you use easyflasher. But I don't know about windows.
Sent from my Transformer TF101 using Tapatalk HD
I bought two cables just to make sure. Still nothing.
Sent from my Transformer TF101 using xda app-developers app
2 suggestions:
1 - enable USB debugging in settings and see if your computer recognizes it as an ADB device.
If so, use PERI (Windows).
2 - Boot to ADB (VOL UP and POWER) and see if your computer recognizes it. If so use NVFlash or EasyFalsher (Windows)
Peri windows?
Sent from my Transformer TF101 using xda app-developers app
This: http://forum.xda-developers.com/showthread.php?t=1681155
If your tablet is recognized by a windoze PC with USB debugging enabled, you can root using the PERI tool that Thing O Doom developed. The commands work on Linux, but you have to type them out manually. The .bat file only works in Windoze.
Nothing so far
Thank you for all the input so far but, still nothing. Windows will not reconize it in APX or normal mode. Ubuntu Does not either. When going into recovery all I get is the little guy on his back. I did download wlanadb and my computer will reconize it but honestly I have no idea what to do from there.
hello guy I have asus tf300t ( LOCKED) I was installing some apps then rebooted my device then it got stock at asus sign !
I pressed the power button and -volume button it got me into (4 options)
I tried wiping option it and rebooted it didn't work my device stayed at asus sign...
I tried the first option to get into recovery (it showed me android dead robot with a ! sign on him)
I really don't know what to do !!
PLEASE HELP ME is there is any thing I can do to get it working please replay guys im a noob and I need ur help :I(
I got this same problem recently. I was locked and unrooted. The thread I made is here:
http://forum.xda-developers.com/showthread.php?t=2253834
It worked for me after I wiped the data. You could try flashing a .blob file as EndlessDissent suggested in the above thread
If it still doesn't work, then you could try sending it in to Asus RMA
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
UndisputedGuy said:
I got this same problem recently. I was locked and unrooted. The thread I made is here:
http://forum.xda-developers.com/showthread.php?t=2253834
It worked for me after I wiped the data. You could try flashing a .blob file as EndlessDissent suggested in the above thread
If it still doesn't work, then you could try sending it in to Asus RMA
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
i just tried again wiping and drained my battery and charged it again
my asus will stay on the asus sign ....
and I tried to flash blob file via fastboot it just gives me waiting for device
and as far as I read the blob file to flash it I have to be unlocked
but im locked ...
please guys I have no warranty.... any one can help me any ideas please ?!
ayhamx360 said:
i just tried again wiping and drained my battery and charged it again
my asus will stay on the asus sign ....
and I tried to flash blob file via fastboot it just gives me waiting for device
and as far as I read the blob file to flash it I have to be unlocked
but im locked ...
please guys I have no warranty.... any one can help me any ideas please ?!
Click to expand...
Click to collapse
Has your warranty ran out or did you void your warranty?
I'm locked and I was able to flash a .blob file. You have to be in the bootloader of your device and connected in fastboot mode. Try typing "fastboot devices" to see if your computer is recognising your device. It didn't work for me all the time but I did get it to work eventually
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
It's nice to be important, but it's more important to be nice.
UndisputedGuy said:
Has your warranty ran out or did you void your warranty?
I'm locked and I was able to flash a .blob file. You have to be in the bootloader of your device and connected in fastboot mode. Try typing "fastboot devices" to see if your computer is recognising your device. It didn't work for me all the time but I did get it to work eventually
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
It's nice to be important, but it's more important to be nice.
Click to expand...
Click to collapse
hello thanks for ur replay I appreciate ur help
I bought it with out warranty...
here is what I did ( pressed volume down and power it got me into the menu )
I pressed down choosed the usb icon pressed up it connected
and on my computer device manager it showed me( Asus Android bootloader interface)
then I opened fastboot after that i tyfped adb devices it gaved me a list of devices attached
then I pressed
fastboot -i 0x0B05 flash system blob
and it just gaved me waiting for device
please help me I don't know what to do
ayhamx360 said:
hello thanks for ur replay I appreciate ur help
I bought it with out warranty...
here is what I did ( pressed volume down and power it got me into the menu )
I pressed down choosed the usb icon pressed up it connected
and on my computer device manager it showed me( Asus Android bootloader interface)
then I opened fastboot after that i tyfped adb devices it gaved me a list of devices attached
then I pressed
fastboot -i 0x0B05 flash system blob
and it just gaved me waiting for device
please help me I don't know what to do
Click to expand...
Click to collapse
What Android version are you on? I assumed (mistakenly so it appears) that you were on 4.2. How long have you tried waiting? Also, did you type in "adb devices" or "fastboot devices"? Have you moved the .blob file to your fastboot folder?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
It's nice to be important, but it's more important to be nice.
UndisputedGuy said:
What Android version are you on? I assumed (mistakenly so it appears) that you were on 4.2. How long have you tried waiting? Also, did you type in "adb devices" or "fastboot devices"? Have you moved the .blob file to your fastboot folder?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
It's nice to be important, but it's more important to be nice.
Click to expand...
Click to collapse
Im a noob I never checked what version I was on
I bought my device 5 months ago and never updated it so I guess I was on 4.04
and yes I tried waiting I waited for 1 hour and tried it a couple of times
I tried adb devices it gaved me list of devices attached
and tried fastboot devices
and yes I moved the .blob file to my fastboot folder
what should I do please help
ayhamx360 said:
Im a noob I never checked what version I was on
I bought my device 5 months ago and never updated it so I guess I was on 4.04
and yes I tried waiting I waited for 1 hour and tried it a couple of times
I tried adb devices it gaved me list of devices attached
and tried fastboot devices
and yes I moved the .blob file to my fastboot folder
what should I do please help
Click to expand...
Click to collapse
I'm not sure if it works the same way on ICS. Regardless, where are you getting the .blob file from? I would think (although I could be wrong) that you would need a .blob file that matches the firmware you were on (ICS) as opposed to an updated one (JB) so make sure you're flashing the right .blob file
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
It's nice to be important, but it's more important to be nice.
Your issue seems more pc side of things, try running fastboot as admin, If "fastboot devices" does show anything up it would suggest problems on the pc
i think you you need to get the blob in the same folder as fastboot then hold shift and right click the folder and choose run command file here (or something like that) then that should work