I've never installed a custom ROM on a Desire S before but the limited instructions assume you have a bit of knowledge, I don't as far as a Desire S is concerned.
well u need to s-off ur phone first Link 1 (by software) or Link 2 (by hardware)
then root with gingerbreak Link
then install custom recovery Link
then choose custom rom to flash Link
basically thats it
read twice every post before apply any of this files..just make sure that you understand whats going on if you do that.
happy rooting
But in you links aren't included the main - HOW TO flash custom rom...
that is a joke ..right?
do i need to put
1.
2.
3.
for steps?
Yes. I come from ios. I don't have a clue about android.
Sent from my HTC Desire S using XDA App
slugger09 said:
Yes. I come from ios. I don't have a clue about android.
Sent from my HTC Desire S using XDA App
Click to expand...
Click to collapse
Select a rom, such as the one in my sigi. Click the LBC link in my sigi and download the 5.3 rom and put it on you SD card. Turn your phone off and just this once pull and refit the battery.
Press and hold the volume down button and press the on button. Wait for the green writing to flash on the screen and go away.
Press the volume down button once more to highlight RECOVERY.
Press the power button to select
You'll then get a black screen with purple writing. Using the Vol button navigate to BACK UP AND RESTORE and Slect using the Power button.
Select BACK UP. You've now backed up your existing rom!!!
Once finished, go back to the main menu and select WIPE DATA/FACTORY RESET.
Select install zip from SD card.
Select choose zip from SD card.
Select your rom
In about 4 to 5 minutes the phone will tell you its done. (DO NOT INTERUPT THIS PROCESS), make sure you have at least 30% battery before you begin!
Go back to the main menu and reboot system.
Press the thanks button.
Done
slugger09 said:
Yes. I come from ios. I don't have a clue about android.
Sent from my HTC Desire S using XDA App
Click to expand...
Click to collapse
And i don't have a clue about ios, lol....
If you are (Check your HBoot first) able/gonna use alpharevx (Read all alpharevx topics for more info)then try it like this:
1 - Find a rom you what to use and download rom, Copy Rom to your sd card.
2 - If able to use alapharevx then download alpharevx and run it as told to.
3 - if all goes well with alpharevx when it asks do you want custom recovery answer "YES" and wait.
4 - once done power down phone, then hold volume down and power and wait for hboot screen then wait till you have control (you use volume keys to move up/down and power button to select) volume down to recovery and press power button, now wait for recovery to load.
5 - (Again volume buttons for up/down, power button for select, and back button to go back a menu) Once recovery loads use backup to backup rom you are on now (just incase).
6 - Once backup is complete, go back a menu and select "data/factory reset" then Yes.
7 - Once done goto wipe cache partition then Yes.
8 - Once done goto advance and then "Wipe Dalvik Cache" then Yes, once done go back a menu.
9 - Just to be on the safe side do a "data/factory reset" then Yes again.
10 - Once done goto "Install zip from sdcard" then "Choose zip from sdcard" scroll up/down to the rom.zip you downloaded the select it, then goto yes then wait.
11 - Once that is done go back to main menu then select "Reboot System Now"
12 - Now sit back and wait for the rom to load and sort it self out.
If all went without an error it should all work ok.
And after all that just notice someone beat me to it......
TheReaperUK said:
And i don't have a clue about ios, lol....
If you are (Check your HBoot first) able/gonna use alpharevx (Read all alpharevx topics for more info)then try it like this:
1 - Find a rom you what to use and download rom, Copy Rom to your sd card.
2 - If able to use alapharevx then download alpharevx and run it as told to.
3 - if all goes well with alpharevx when it asks do you want custom recovery answer "YES" and wait.
4 - once done power down phone, then hold volume down and power and wait for hboot screen then wait till you have control (you use volume keys to move up/down and power button to select) volume down to recovery and press power button, now wait for recovery to load.
5 - (Again volume buttons for up/down, power button for select, and back button to go back a menu) Once recovery loads use backup to backup rom you are on now (just incase).
6 - Once backup is complete, go back a menu and select "data/factory reset" then Yes.
7 - Once done goto wipe cache partition then Yes.
8 - Once done goto advance and then "Wipe Dalvik Cache" then Yes, once done go back a menu.
9 - Just to be on the safe side do a "data/factory reset" then Yes again.
10 - Once done goto "Install zip from sdcard" then "Choose zip from sdcard" scroll up/down to the rom.zip you downloaded the select it, then goto yes then wait.
11 - Once that is done go back to main menu then select "Reboot System Now"
12 - Now sit back and wait for the rom to load and sort it self out.
If all went without an error it should all work ok.
And after all that just notice someone beat me to it......
Click to expand...
Click to collapse
eeeeeeeeeeee
Thanks all,
InfernalByte said:
Select a rom, such as the one in my sigi. Click the LBC link in my sigi and download the 5.3 rom and put it on you SD card. Turn your phone off and just this once pull and refit the battery.
Press and hold the volume down button and press the on button. Wait for the green writing to flash on the screen and go away.
Press the volume down button once more to highlight RECOVERY.
Press the power button to select
You'll then get a black screen with purple writing. Using the Vol button navigate to BACK UP AND RESTORE and Slect using the Power button.
Select BACK UP. You've now backed up your existing rom!!!
Once finished, go back to the main menu and select WIPE DATA/FACTORY RESET.
Select install zip from SD card.
Select choose zip from SD card.
Select your rom
In about 4 to 5 minutes the phone will tell you its done. (DO NOT INTERUPT THIS PROCESS), make sure you have at least 30% battery before you begin!
Go back to the main menu and reboot system.
Press the thanks button.
Done
Click to expand...
Click to collapse
Is this still current? It's the first straight forward explanation I've seen! I want to put a new ROM on my Epic Touch this weekend. I've done a lot of rooting but no ROM flashing yet. Thank you!
Red Jenny said:
Is this still current? It's the first straight forward explanation I've seen! I want to put a new ROM on my Epic Touch this weekend. I've done a lot of rooting but no ROM flashing yet. Thank you!
Click to expand...
Click to collapse
of course u need to s-off first
also i was a complete newbie as well, i read a lot here at XDA. These tutorials are mostly very easy to understand even for complete newbies. although my english is not that great i could understand them quite good. Just don't be that lazy , search for your information, try to learn something about rooting/flashind and your device, these information are here.
Sent from my Desire S using the force
Everything is pretty much the same still. Even though I'm still running the same 4.0.0.4 Recovery it is very outdated now.
All you need to remember is to navigate with the volume key and select with power.
Related
Im kinda new at this stuff, so could anyone tell me how to flash wanted's ROM. I've got Dexters Froyo on there already and I just wanted to try Wanteds version. So if anyone could help I would appreciate it.
if you got Dexters Froyo on there already ..and you should have system recovery in your phone.otherwise you find and download the System Recovery (Open recovery)and install it.
download Wanted rom and copy the folder "Wanted rom XXX" to your SD CARD\ nandroid\openrecovery directory of your sdcard
lunch the System Recovery
Press install recovery
Press Boot recovery
use the Vol + or - button on the right hand side of the phone to choose Nandroid and press Camera button
then select the restore option (use Vol + -) press Camera button
then select the "Wanted rom XXX"(use Vol + -) press Camera button
and then select restore all and wait ..after the process..press go back ..go back... go back to the main recovery manu..
then select Wipe Data / Factory reset
and then reboot the phone ...
mediaon said:
if you got Dexters Froyo on there already ..and you should have system recovery in your phone.otherwise you find and download the System Recovery (Open recovery)and install it.
download Wanted rom and copy the folder "Wanted rom XXX" to your SD CARD\ nandroid\openrecovery directory of your sdcard
lunch the System Recovery
Press install recovery
Press Boot recovery
use the Vol + or - button on the right hand side of the phone to choose Nandroid and press Camera button
then select the restore option (use Vol + -) press Camera button
then select the "Wanted rom XXX"(use Vol + -) press Camera button
and then select restore all and wait ..after the process..press go back ..go back... go back to the main recovery manu..
then select Wipe Data / Factory reset
and then reboot the phone ...
Click to expand...
Click to collapse
Alright so it is the same way as Dexters. Thanks!
I just flashed my Inspire 4g for the first time. Last night I downloaded Simple Root and rooted my device after I flashed the new ROM COREDROID on there i can not install anything from the market place.
I am connect with wifi and sd card is mounted.
anyone have any ideas why i can not install anything
Once you go to the market an select ok and then install what exactly happens?
I go to find any app and i click install and then it says Download was unsuccessful idk what is going on with it
criticalmass24 said:
I go to find any app and i click install and then it says Download was unsuccessful idk what is going on with it
Click to expand...
Click to collapse
Have you tried using WiFi?
Sent from my Inspire 4G using XDA Premium App
Bad flash. Re-flash. Fixt.
You may want to check the MD5sum of the rom you downloaded.
https://help.ubuntu.com/community/HowToMD5SUM
ENSURE YOU DO THE FOLLOWING BEFORE FLASH;
-Using the volume buttons scroll down to to down to wipe data/factory reset. (unless you are upgrading, THIS STEP IS NOT OPTIONAL!)
-Press the power button to select.
-Use the volume buttons to scroll down to YES-- delete all user data, use the power button to select.
-Scroll down to Advanced press power to select.
-Scroll to Wipe Dalvik Cache press power to select.
-Go down to Yes-- Wipe Dalvik Cache use the power button to select.
-Select go back
-Go to Install zip from sdcard and select it using the power button.
-Select choose zip from sdcard.
-Scroll down and find the ROM you wish to flash press the power button to select it.
-Select Yes - Install (roms name)
Use search next time.
http://forum.xda-developers.com/search.php?searchid=79314236
Hi all,
received my desire s today so im entirely new to modding it (but not new to flashing other devices)
is there a simple way or can someone explain step by step how to put a custom ROM on it safely?
I've heard of something called XTC clip but i dont want to buy it just to put a custom rom on the desire.
all help is appreciated, thanks
Well, the XTC Clip is to make your device S-OFF, that will allow you to root your phone so you can flash a custom rom
Still i using Stock Rom and never had problems with it
superkid said:
Well, the XTC Clip is to make your device S-OFF, that will allow you to root your phone so you can flash a custom rom
Still i using Stock Rom and never had problems with it
Click to expand...
Click to collapse
S-OFF?
charrsss
Yeah, if you turn on your phone pressing volume down you can enter the hboot and see if your phone is S-OFF, or S-ON...
If its S-OFF you can root your phone.. if not you cant
I dont know much about this neither
PLEASE PUT QUESTIONS IN THE GENERAL FORUM !!!!!!!
Steps to flash -
1) S-OFF
2) Root
3) Install ROM Manager and Flash ClockWorkMod Recovery.
4) Put ROM into your SD card. Boot into recovery and wipe data. Then Flash the ROM
You can find details in other threads
Step 1: Go to Setting -> Power to disable fastboot.
Step 2: Power down your device. Press and hold Volume down button first and then press the power button. Hold both buttons for 10 secs and release them. You will get to see the phone info. Check Hboot version and S-on/S-off status.
If your Hboot is 0.98 and S-on, you may proceed as below.
Step 3: Get the software from alpharev and get a copy of the ROM (I am using Virtuous unity 1.27). When you got the Virtuous Unity rom, copy it into your SDcard.
Step 4: Get a copy of Linux: You can get Ubuntu.
Step 5: Unzip the alpharevx into the root directory.
Step 6: Open Terminal. Go to the directory that you keep your alpharevx apps. Execute command: sudo ./alpharevx to activate the program. You will be prompted to key in your password for your Ubuntu.
Step 7: Connect your data cable. Select "disk drive" and the screen will start to react to your connection. Copy the number generated by alpharevx.
Step 8: Visit alpharev.nl/x/beta/ again and click download again. Key in the serial number gotten from the program and fill up the form. Once it done, a serial number will be generated. Copy the serial number and key it to the alpharevx program. Once it is done, power down the phone and repeat Step 2.
Step 9: Once you have verified the status of your phone, do not exit. Press Volume down button once to select "recovery" and press power button.
Press Volume down button to select "wipe data/factory reset".
Press Volume down button to select "Yes"
Press Volume down button to select "wipe cache partition"
Press Volume down button to select "Yes"
Press Volume down button to select "advance"
Press Volume down button to select "Wipe Dalvik Cache"
Press Volume down button to select "Yes"
Press Volume down button to select "Wipe Battery Stats" (if any)
Press Volume down button to select "Yes"
Press Volume down button to select "back"
Press Volume down button to select "install zip from sdcard"
Press Volume down button to select "choose zip from sdcard"
Select the rom.
Once the Rom installation is done, reboot the phone.
I found that it takes some time for the phone to be set up. Just be patient.
All the best!!!
Virtuous unity 1.27 has superuser, rom manager, task manager, overclocking and many other goodies.
Just need to
1) S-off
2) wipe to prepare phone
3) install the ROM.
I am one happy user and first time ROM flasher and user of virtuous unity 1.27
verifunny said:
Step 1: Go to Setting -> Power to disable fastboot.
Step 2: Power down your device. Press and hold Volume down button first and then press the power button. Hold both buttons for 10 secs and release them. You will get to see the phone info. Check Hboot version and S-on/S-off status.
If your Hboot is 0.98 and S-on, you may proceed as below.
Step 3: Get the software from alpharev and get a copy of the ROM (I am using Virtuous unity 1.27). When you got the Virtuous Unity rom, copy it into your SDcard.
Step 4: Get a copy of Linux: You can get Ubuntu.
Step 5: Unzip the alpharevx into the root directory.
Step 6: Open Terminal. Go to the directory that you keep your alpharevx apps. Execute command: sudo ./alpharevx to activate the program. You will be prompted to key in your password for your Ubuntu.
Step 7: Connect your data cable. Select "disk drive" and the screen will start to react to your connection. Copy the number generated by alpharevx.
Step 8: Visit alpharev.nl/x/beta/ again and click download again. Key in the serial number gotten from the program and fill up the form. Once it done, a serial number will be generated. Copy the serial number and key it to the alpharevx program. Once it is done, power down the phone and repeat Step 2.
Step 9: Once you have verified the status of your phone, do not exit. Press Volume down button once to select "recovery" and press power button.
Press Volume down button to select "wipe data/factory reset".
Press Volume down button to select "Yes"
Press Volume down button to select "wipe cache partition"
Press Volume down button to select "Yes"
Press Volume down button to select "advance"
Press Volume down button to select "Wipe Dalvik Cache"
Press Volume down button to select "Yes"
Press Volume down button to select "Wipe Battery Stats" (if any)
Press Volume down button to select "Yes"
Press Volume down button to select "back"
Press Volume down button to select "install zip from sdcard"
Press Volume down button to select "choose zip from sdcard"
Select the rom.
Once the Rom installation is done, reboot the phone.
I found that it takes some time for the phone to be set up. Just be patient.
All the best!!!
Click to expand...
Click to collapse
Line 3.....
If your Hboot is 0.98 and S-on, you may proceed as below.
I thought you could only flash ROMs on S-OFF phones? is there am method to now do it if the phone is still S-ON or was that a typo?
EDIT: Checked around a bit and found this
http://forum.xda-developers.com/showthread.php?t=1162102
which confirms what you were saying! Thank you for the very helpful and informative post! Much appreciated.
verifunny said:
Virtuous unity 1.27 has superuser, rom manager, task manager, overclocking and many other goodies.
Just need to
1) S-off
2) wipe to prepare phone
3) install the ROM.
I am one happy user and first time ROM flasher and user of virtuous unity 1.27
Click to expand...
Click to collapse
Every custom rom for this phone have superuser, rom manager, task manager and overclocking..
@ verifunny
Manymany thanks!! using your guide and another I found stickied about alpharevx I am completely unlocked to S-OFF and now have virtuous installed
many thanks to all others also for their replies.
@ ben, you are welcome. The credits goes to those developers.
For my comment after step 2, it is written so that you are seeing what you should and the alpharexv does not support anything other than 0.98.0000. I think there is a hboot that is of a higher version.
Enjoy your new installation. I am very happy with it.
First and foremost, you cannot apply OTA updates to rooted phones. Doing so will cause a boot loop. If for whatever reason you did this anyway, I quoted a fellow XDA member with instructions to fix your phone.
* I did this just to be helful and for those who keep on posting questions and spamming the board because they did not read this q and a faq http://forum.xda-developers.com/showthread.php?t=1220484. I suggest you read all of the post at the provided link after fixing your phone. All future questions you may have will most likely be answered there.
stateofdesign said:
Thank you all for the responses. I stumbled upon this info just as I was ready to give up searching. Sorry I can't post the link. Method #1 worked for me. I didn't lose any data either...
Method 1: (thanks to sonicbuffalo for posting this method)
*DOES NOT DELETE YOUR DATA
1) Once you are in ClockWorkMod Recovery, scroll down to "Wipe cache partition".
2) Select "Wipe cache partition" using the home key or power button.
3) Now, scroll down to "Yes - wipe cache".
4) Press the home key or power button to perform the wipe.
5) When done, restart your phone.
6) Your ThunderBolt will boot into the Android operating system and will say that the UPDATE FAILED.
7) Choose Cancel to stop the update.
8) Restart your phone one last time and you'll see that the "Powering Off" loop is gone.
Method 2: This will DELETE your data (do this if method one does not work)
1) Once you are in ClockworkMod Recovery, select "wipe data/factory reset" using volume keys.
2) Press home key or power button to select.
3) Answer Yes, by scrolling with vol keys and home or power key to select.
4) When phone reboots, the powering off loop should be gone.
Method 3: This only works if you have a Nandroid Backup from prior to accepting the update.
1) Once in clockwork select "backup and restore" using vol keys.
2) Select using the home key or power button
3) From next menu select "restore"
4) Choose your backup from list and select.
5) Answer yes to restore backup
6) When phone reboots the "powering off" loop is gone.
Click to expand...
Click to collapse
Hit the thanks button if this post was helpful for you.
Sent from my ADR6400L using XDA App
this is my first time to root and flashed rom into my xoom mz601!
my problem is i installed eos[ics] rom, after loading the circle in the right corner , the screen starts up, while selecting option by touching the screen, the start or select language option didnt work for me, i am sure its not lag, because when im clickin the power or vol button it works smoothly! same after clicking power button there are 4 options to touch but still no responses at all! only the buttons works for me! please help me! i love my xoom so much! (
Hi, NOOB-BAy!
Ok after the circle boot animation, what pop up option do you see? Reflash the ROM and GAPPS, reboot. Tell us more info.
Could u be a little more soecific an we can help u easy
Mod or Die
Mjamocha said:
Hi,
Ok after the circle boot animation, what pop up option do you see? Reflash the ROM and GAPPS, reboot. Tell us more info.
Click to expand...
Click to collapse
the start up screen to configure the device. i want to reflash but the problem is my xoom doesnt read my sdcard. i use cwm 4.0.0.4.
vhez said:
the start up screen to configure the device. i want to reflash but the problem is my xoom doesnt read my sdcard. i use cwm 4.0.0.4.
Click to expand...
Click to collapse
flash manually, boot into recov, locate ur zip.
Mjamocha said:
flash manually, boot into recov, locate ur zip.
Click to expand...
Click to collapse
how to flash manually? thanks in advance
vhez said:
how to flash manually? thanks in advance
Click to expand...
Click to collapse
The 4.0.0.4 version only reads your internal storage. The zip files will be in downloads in media/internal (in recent eos roms). From your cwm recovery screen you need to choose zip from that downloads folder. Follow advice of Mjamocha.
vhez said:
how to flash manually? thanks in advance
Click to expand...
Click to collapse
First Thing is you should do is a Google Search. Most of all of your questions can be
answered from there along with videos on "How To" (so that you can actually see
the process).
via PC ..Copy the ".zip" file(s) from your SDcard
*should be your ROM and GAPPS* that you want to flash,
paste them to your "Internal Storage"
1.With the device off - Hold down the up volume key and press the power button (at the same time)
2.Device will boot ..The Motorola "M" will appear on the screen. (release the vol up and power key)
3.Wait about 3 seconds, then tap the vol down key. (shortly in white "Android Recovery" will appear on the top of the screen)
4.Press the volume up key to select it.
5.You should now be in ClockWorkRecovery (CWR)
6.Use the up and down keys to navigate through the “Recovery Menu” to "install from SDcard"
7.Press the Power Button to select.
8.Use the up and down keys to Navigate/Locate your ".zip" file that you want to flash
9.Press the Power Button to select.
10.Use the up and down keys to navigate to "go back"
11.You should then see "Reboot" hit the Power key to select.
Helpful Link: http://forum.xda-developers.com/showthread.php?t=1209341
As Always, If This Was Helpful ... Hit The Thanks!