Hello.
Is there any way i can get win 98 or win xp to run as a "emulator/simulator" on my phone?
Witch installs or runs from my internal or external flash drive?
and uses the phone's wifi as internet connection?
If you have Android SDK installed on your PC or flash drive, you can use PDANet to tether your internet for free! its amazing to use and easy to set up!
ognimnella said:
If you have Android SDK installed on your PC or flash drive, you can use PDANet to tether your internet for free! its amazing to use and easy to set up!
Click to expand...
Click to collapse
Pretty sure that was completely unhelpful to the OP.....just sayin.
Now, back on topic. I'm no expert, but I don't think there is a DOS/Windows emulator for android. Might be worth searching the net for however.
I currently have Android ICS in Vmware running great but i need internet any help.
Thanks,
Jordan
You will need at least the vmware network driver/bluetooth.Something weird to try is to connect a inverted usb (the ones used to connect 2 computers) to another computer and run a reverse tethering software between the vmware and the other pc.
Looking for some advice on using this IMac
http://www.everymac.com/systems/app...20-inch-aluminum-early-2008-penryn-specs.html
with the One S/S4
I know nothing about Apple stuff, but my laptop is about shot and my son may give me his old IMac above. May be temporary or permanent, not sure. I have hboot below .13, so don't need to do much other than copy my sdcard files back and forth. Haven't used adb/fastboot for awhile. Know I need to get drivers reinstalled and believe I can use adb/fastboot with it. I assume same SDK I have (R15 I believe), which I could copy from an Acronis BackUp to IMac--maybe? Just need to use different linux commands. He is Apple thru and thru--and a Software Engineer, so learning to use adb/fastboot with IMac may not be a big deal.
I have seen Apple users here and on my old N1 forums post for help on command lines, so assume this may be only issue--??
Just curious on any tips/pros/cons on doing this, as he is in opposite end of state and no need to bring it all that way when they come down for Christmas, if the IMacs are more difficult to work with on this phone.
Thanks for any advice--
Ken
it doesnt really matter whether you're using mac or windows, if you're trying to run adb.
i used mac and adb, and its great. =)
What about dual-booting Windows on it?
Sent from my HTC One S using Tapatalk 2
You can write/build android apps on the mac, but building kernels and especially android itself, I would use ubuntu in a virtual box.
If it is not maxed out on RAM (8G probably?) I would do that. It's not expensive and will help a lot when running a VM.
(I live in a macbook pro.)
usaff22 said:
What about dual-booting Windows on it?
Click to expand...
Click to collapse
The only reason to run windows would be to run a RUU.
You can download adb and fastboot for mac, and you will never have 'wrong drivers'.
Appreciate all responses--been reading and found the imac adb/fastboot files and sdk if i want it.
Did see commands for basic stuff not really different.
Thought about dual booting, not sure if i have a windows copy of my current OS--Vista. Could restore my whole acronis backup to it on that partition i make. Got the latest Acronis that says it can restore to any hard drive--maybe will test that--
I am interested to try the imac as my phone is not connecting well thru usb and would like to see if it is the laptop--
rugmankc said:
Could restore my whole acronis backup to it on that partition i make. Got the latest Acronis that says it can restore to any hard drive--maybe will test that
Click to expand...
Click to collapse
Don't think that would be a good idea best off doing a fresh install.
probably right--would like to try it with just the imac anyway
rugmankc said:
probably right--would like to try it with just the imac anyway
Click to expand...
Click to collapse
Good luck. Windows 7 not being too bad with change I think it have a better chance of working if the PC its from was Intel too. I have gone from Core Duo setup to a i5 setup without a format.
Like everyone been saying, you be fine. I have a macbook pro.. and use vmware fusion to do all my windows base apps.. but I've used virtualbox as well.. both do the job.. it is a little different but I think you will be fine.. Just make sure you have lots of ram on the iMac if your going to do a lot of windows apps.. since I use vmware fusion I use unity mode.. makes it look like i'm running windows apps on native osx.. its just windows os is "minimized" .. Have fun..
OK guys thanks--I will have my son bring it down for Christmas and give it a go. IMac for free=no brainer anyway--
[Cruzer] it has 2gb ram, what I have now--
I am not totally computer illiterate and son is pretty good--so i think this will work out fine for now. My space is limited so really need a laptop, but will see how this goes for now. Just had a 3800.00 transmission rebuild bill. So funds limited for a new laptop. Especially for one that I really want.
Appreciate all the inputs--will post how it goes--
Ken
i strongly suggest not to make it a dualboot.
mac runs on darwin which kinda a unix like based operating system.
if your goal is only using adb, you can just download the android-sdk.
they include an adb.
then use terminal to run adb.
terminal application is in your utilities applications.
its going to be a purely in command-line.
for example:
i downloaded android-sdk to my workspace in Documents folder.
adb is in platform-tools folder in the android-sdk.
run the adb command, it will shows the helps you need.
### copy paste from my terminal ###
ditto:~ ahartowo$ Documents/workspace/android-sdk/platform-tools/adb
Android Debug Bridge version 1.0.29
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
appreciate the input, probably won't dual boot--would like to try just the Imac OS, and go from there--
rugmankc said:
OK guys thanks--I will have my son bring it down for Christmas and give it a go. IMac for free=no brainer anyway--
[Cruzer] it has 2gb ram, what I have now--
I am not totally computer illiterate and son is pretty good--so i think this will work out fine for now. My space is limited so really need a laptop, but will see how this goes for now. Just had a 3800.00 transmission rebuild bill. So funds limited for a new laptop. Especially for one that I really want.
Appreciate all the inputs--will post how it goes--
Ken
Click to expand...
Click to collapse
Well the max stated by the page you linked states 4GB.. ram is cheap these days.
you can actually put 8GB in it. my imac is running 8GB. some says wants to upgrade to 16GB.
ahartowo said:
you can actually put 8GB in it. my imac is running 8GB. some says wants to upgrade to 16GB.
Click to expand...
Click to collapse
hit my thanks limit but--thanks
with my 3800.00 transmission bill will hold off on any extra spending, kinda why my son is giving me the imac for now--with laptop near end
if i keep it long term, i will increase ram
ok so i got sdk setup and put virtuous rom back on phone for htc options
downloaded htc sync, which i thought would have drivers
imac connects but says it can't access storage
usb debug is checked, fastboot unchecked
did some googling for just the drivers, no luck
did i miss something simple
windows just comes up and starts to look for drivers when phone plugged in--
i don't care to actually sync anything just access sdcard
rugmankc said:
ok so i got sdk setup and put virtuous rom back on phone for htc options
downloaded htc sync, which i thought would have drivers
imac connects but says it can't access storage
usb debug is checked, fastboot unchecked
did some googling for just the drivers, no luck
did i miss something simple
windows just comes up and starts to look for drivers when phone plugged in--
i don't care to actually sync anything just access sdcard
Click to expand...
Click to collapse
Can't think of the name of it but the SD is done a different way in that rom so it not mass storage any more so maybe that way don't work on mac.
had no luck on aosp
yeah it has some networking choices, not the original htc sync choice
seems like i just don't have drivers that i thought sync manager would install
not sure
guess i will wait till tomorrow and let my son look at it--he knows the macs, i don't
but like i said the sync mgr does connect to phone just no storage access
rugmankc said:
had no luck on aosp
yeah it has some networking choices, not the original htc sync choice
seems like i just don't have drivers that i thought sync manager would install
not sure
guess i will wait till tomorrow and let my son look at it--he knows the macs, i don't
but like i said the sync mgr does connect to phone just no storage access
Click to expand...
Click to collapse
Hmm that sounds odd but ya can't really help on the mac side of things.
ok guys, i am up and running on the imac--problem mainly imac inexperience--son got me set up with some training--
he was out late with buddies last nite, so on my own till he got up today
phone mounts fine
transfering stuff from phone and laptop to imac while sons and daughter-in-law went to see Hobbit
thanks for all the inputs and where appropriate--happy holidays
I actually have 4gb ram
Cant figure out where else to ask this but you all seem to be the brightest group of computer users I know.
I may be dreaming on this technology and I cant find much form web searches here is my thought please let me know if it or something similar would work.
Have a thumb drive running an OS (Ubuntu, or Windows 7,8 whatever) that is plugged into a USB input on a cable or WiFi modem. So technically this thumb drive is always on or I can somehow access it to turn it on. Now the tricky part. I would like to access this windows or Ubuntu via my android table or my note 2 and use it as though it is my desktop (as needed). I see I can use apps like "Jump" to access a freestanding computer with internet connection but wondering if I can take it a step further and just have everything housed on the thumb drive.
I ask this because I recently lost my tablet due to display issues. I am interested in alternatives before I go buy another full on computer.
thanks in advance for the assistance.
It sounds like you are asking for two separate things, booting from a USB drive, and accessing that computer via a tablet. For the first, you can use a program such as Unetbootin, to create a bootable linux distro onto a USB drive. With that, you should be able to have a fully functional linux distro on a USB stick. For the windows equivalent, you could try WintoFlash. As for the second part of your question, if you enable SSH on your computer, you should be able to SSH tunnel into your computer from any other device that has SSH. As android devices already allow themselves to be SSH'ed into, I don't see why you wouldn't be able to use it to access your computer remotely.
syung said:
It sounds like you are asking for two separate things, booting from a USB drive, and accessing that computer via a tablet. For the first, you can use a program such as Unetbootin, to create a bootable linux distro onto a USB drive. With that, you should be able to have a fully functional linux distro on a USB stick. For the windows equivalent, you could try WintoFlash. As for the second part of your question, if you enable SSH on your computer, you should be able to SSH tunnel into your computer from any other device that has SSH. As android devices already allow themselves to be SSH'ed into, I don't see why you wouldn't be able to use it to access your computer remotely.
Click to expand...
Click to collapse
Thanks for the info! Yes you are correct I am trying to do both those things, however I am trying to do it without the need of a physical PC. I kind of want this boot able thumb drive or whatever to be my PC that I can access whenever needed. I am thinking this is kind of like a virtual server but I dont know how those are housed. i have heard there are cable modems with a USB drive on them to allow them to act as a server if I could just access my boot-able windows or Ubuntu thumb drive that is in the cable modem that would be what I'm wanting.
Does it have to be a USB device? If not, you could look into using a Rasberry Pi to do just that. If you want to have your own virtual server, you would need some sort of physical PC or other device, although if you only want to have a box that just constantly hosts VM's, you could look into running your own ESXi server. with ESXi, you could just turn on the box and any computer on the network should be able to use the VM's that are being hosted on the server. However, you do need the VM tools to do it so I do not know if you can use an Android Tablet, unless you figure out a way to SSH into the VM without using the tools or porting the tools over to Android.
syung said:
Does it have to be a USB device? If not, you could look into using a Rasberry Pi to do just that. If you want to have your own virtual server, you would need some sort of physical PC or other device, although if you only want to have a box that just constantly hosts VM's, you could look into running your own ESXi server. with ESXi, you could just turn on the box and any computer on the network should be able to use the VM's that are being hosted on the server. However, you do need the VM tools to do it so I do not know if you can use an Android Tablet, unless you figure out a way to SSH into the VM without using the tools or porting the tools over to Android.
Click to expand...
Click to collapse
Well it can be anything really just prefer not to go through having a "box" if I can skip all the steps and just access it to run the OS. That raspberry Pi looks pretty cool wonder if there is something similar out there to run a windows OS. Looking at it if I rooted my phone apparently i coudl run Ubuntu on the phone
yes, basically you would just run a virtualbox on your phone and SSH into it as a localhost. It works the same way for SSHing into an actual box. The problem is that you wanted windows OS, and windows 7 uses at least 20 gb in storage just for the OS alone, therefore it would be impractical to run it from your phone. If you want windows at some point you will need to have a box even if it is just running as a server.
Currently I'm using a custom ROM (CyanogenMod - CM12.1) on my phone (Samsung Galaxy S3 - SGH-T999) and I want to use my wireless adapter (Panda Wireless - PAU05). I am using a proper OTG cable as I have tested it on my USB as it has a light that did turn on (it's powering to the USB connection). I've heard that I might need to find the drivers (I know which chipset drivers it needs) and compile it into my android's ROM, but I want to make sure that is the deal. I must also know if in a chroot that all drivers being used are provided by the system or the download material in the ROM. If there is another way to allow support to my adapter to run that would be nice... If not then is the compiling for drivers on android similar enough to when compiling on any other Linux distro? If there is no way to do this on my phone then please let me know and why (I'd like to know so I am more familiar with problems like these). Thanks in the near future.
The thread got closed at OP's request.