Hello gyus, my problem when i tried to connect to wifi hotspots i couldn't get connected... i Dont know for sure if they had access to the internet but i could not even establish a connection.the same problem with the bluetooth it couldn't find any bluetoooth device on search) but i probably can't connect to open ones.... Any suggestions?
I have htc touch hd t8282 with wm6.5
thanks very much
Your thread lacks a title and your question is difficult to understand.
You complain about not being able to connect to hotspots but dont give any information about those hotspots.
Most likely they are password protected or have device restrictions through MAC addresses.
Some could have internet but require certain network settings.
You can't find any bluetooth devices? Maybe none are around or the ones that are around are not set to visible.
What do you mean by "can't connect to open ones" ?
im hungry
*EDIT*
best advice would be to search the forum of the ROM you flashed. If no one else is experiencing the problems you are then its probably just a bad flash and I would suggest a re-download and re-flash. Is this a problem since you flashed or just one that started to occur? I tend to agree with all points posted above. Good luck!
Related
Hi all,
I've been searching countless forums for a solution to my problem, and I was not able to find a solution.
I purchased a T-Mobile SDA(USA, aka: HTC Tornado) with the belief that I will be able to connect to my hiome WIFI.
I tried connecting with original rom(T-mo SW 1.9.19.16) and I was able to connect to my access point, and I aquired an IP address, and everything, but internet explorer and Opera Mini browser was not able to connect to the internet. IExplorer keeps on "locating" then times out.
I am able to connect to a HotSpot location through wifi and also my G (GPRS) indicator is always on.
My guess is that TCP/IP use is somehow blocked for anything but T-mobiles HotSpots, and otherwise it tries GPRS(I do not have data plan.)
What I mean is that they restrict me to connect to GPRS or Edge in general, unless there is a HotSpot operated by T-Mobile.
Anyways if someone has an idea, please help me out, since I've spent countless of hours(not quite countless, but more than 48 hours for sure) on this, with no luck.
Please, anything, idea, reg hack, I accept anything.
Thank you.
PS: Now I'm running an iMate sp5m rom (i-mate_SP5m_WWE_1.6.331.6.exe) and nothing changed....
I'm sure this has come up before (try searching) but make sure your internet explorer isn't set to use WAP Network only.
Thanks for your reply...really appreciate it.
I was on a trip in NYC and I had a variety of WIFI spots, and to my very surprise I was able to get online through WIFI.
It seems that I still needed the iMate Rom, but my problem is my home wifi network.
It's weird since I enter my key and I get an IP, yet the connection is still not the correct one.
My next step is to look for a list of access points which have issues with SDAs, and if mine passes I'll start changing settings on my access point and go from there.
Thanks again, and if someone has a link to the list, I would appreciate it if it will post it.
And also if someone knows how to get rid of the GPRS indicator....
Thanks
JosephKnecht said:
Thanks for your reply...really appreciate it.
I was on a trip in NYC and I had a variety of WIFI spots, and to my very surprise I was able to get online through WIFI.
It seems that I still needed the iMate Rom, but my problem is my home wifi network.
It's weird since I enter my key and I get an IP, yet the connection is still not the correct one.
My next step is to look for a list of access points which have issues with SDAs, and if mine passes I'll start changing settings on my access point and go from there.
Thanks again, and if someone has a link to the list, I would appreciate it if it will post it.
And also if someone knows how to get rid of the GPRS indicator....
Thanks
Click to expand...
Click to collapse
If you're on WiFi, you should not be getting the G indicator; in fact, change it to E as it should be if on an Edge network (Cingular); look for a RegEdit to do that.
Re: your home connection not working. Are you sure you are on YOUR WiFi network, not a neighbors somewhere? If you have not changed your WiFi name to something that makes sense to you, I suggest you do that to be sure you are trying to connect to YOUR network. I have neighbors that have not changed their LinkSys names to something else, and there is no way for me to tell if I'm on theirs or mine unless my name is something unique to me and that I know.
Hello Everyone,
I just received a ATT fuse and for the life of me I cannot seem to get the WIFI to work. I've had the tilt and the 8125 previously and I tried duplicating settings to no avail.
Are there known issues with the WIFI on this phone?
I can connect to my WEP enabled wireless router, but opera and IE fails to connect and just keeps giving me errors. This is what I have read and what I have tried:
Setting to "work" instead of "Internet"
I've tried the cab files posted in another thread to disable ATT proxy
I'm a little lost in what to check. I did follow everything I've read here that came up in "WIFI" search. I have not unlocked the phone nor flash a rom.
Could someone lend a hand?
Sign up for the att media program...its on the attwireless site
This is a bit drastic, but an easy potential fix is to flash another ROM (after flashing Hard-SPL of course). AT&T often adds a bunch of unnecessary crap to their ROMs, which may interfere with normal functions. You could always flash the AT&T ROM back if you'd like.
Hi Animexi80,
I already have a data plan. The problem isn't with Media net, it is with the phone's built in WIFI.
Trancecoder,
Really, that drastic of a step.. Do you know of a rom that fixed a WIFI problem?
Thanks
TweedyPepper said:
Do you know of a rom that fixed a WIFI problem?
Click to expand...
Click to collapse
Honestly, I never even gave the AT&T ROM a chance, so I was unaware of Wi-Fi issues. Pretty much any ROM should work. If you flash a Fuze-specific ROM, you may want to run the CAB that disables the hidden AT&T proxy. If you flash a generic Touch Pro ROM, you'll likely need to run a CAB that fixes the keyboard layout.
Ok, I suppose I will give it a go.
If I may ask, would you tell me which rom and radio you're running. It would help rule things out it it doesn't correct the problem.
thanks
you may want to run the CAB that disables the hidden AT&T proxy.
Click to expand...
Click to collapse
What is the "hidden AT&T proxy?"
I just got an AT&T Fuze and after enableing wifi using the wireless manager, had no trouble connecting to home wireless networks with various security configurations (WEP, WPA, hidden SSID, etc.). Of course if the access point has the MAC filter enabled, the Fuze MAC address must be added to the allowed list.
TweedyPepper said:
If I may ask, would you tell me which rom and radio you're running.
Click to expand...
Click to collapse
I'm running an older PROven ROM, version 1.03. I'll be upgrading soon, probably to NATF's ROM. My radio ROM is 1.08.25.20, but (1) the radio ROM doesn't control Wi-Fi, so it's moot, and (2) it has not had very good battery life, so I'll downgrade back to 1.02.25.28 tonight.
rlsmith999 said:
What is the "hidden AT&T proxy?"
Click to expand...
Click to collapse
It's a proxy setting, separate from the normal one under Connections, that is hidden. It's used to make things such as Cingular, er, Cellular Video work.
rlsmith999 said:
I just got an AT&T Fuze and after enableing wifi using the wireless manager, had no trouble connecting to home wireless networks with various security configurations (WEP, WPA, hidden SSID, etc.). Of course if the access point has the MAC filter enabled, the Fuze MAC address must be added to the allowed list.
Click to expand...
Click to collapse
This is a bit off-topic, but FYI, anything below WPA/WPA2 cannot be considered secure. WEP can be cracked in minutes, hidden SSIDs don't make APs invisible, and MAC filtering is useless (except with WPA/WPA2) as anyone sniffing traffic can see client MAC addresses in the clear.
I have found that sometimes when I have both a "data connection" and a "wi-fi" connection that they phone seems to not lock on the wi-fi but tries to use a weak data connection so try turning off the data connection and see if that fixes the problem. Also give a soft reset a try as well.
Surprised by how few ppl are having wi-fi issues. I've tried about 6 ROMs now and have the same problem with everyone (guessing this proves its more of a hardware vs software issue)
I can locate and connect to a wi-fi network but no data transfers. I have to continually disconnect/turn off/reconnect over and over and finally I will get a connection..but if unit goes into sleep for a few minutes...I have to repeat.
Very annoying...no one else is having wi-fi issues?
Hi Everyone,
Sorry I haven't reported back sooner. I wound up loading a different rom on the phone and away went the problem.
jank0023, I have no idea. I would flash the phone back to stock and return it for another if all else fails. In all my searching, here and elsewhere, there ahve been a handful of wifi problems I came across. It doesn't seem like that common of a problem afaik.
jank0023 said:
Surprised by how few ppl are having wi-fi issues. I've tried about 6 ROMs now and have the same problem with everyone (guessing this proves its more of a hardware vs software issue)
I can locate and connect to a wi-fi network but no data transfers. I have to continually disconnect/turn off/reconnect over and over and finally I will get a connection..but if unit goes into sleep for a few minutes...I have to repeat.
Very annoying...no one else is having wi-fi issues?
Click to expand...
Click to collapse
If its your router try another channel make sure its on a supported signal (a,b, g)... lastly ensure your router is excepting all devices. I know these are basic checklist items but sometimes these can get us. I had a laptop that would only work on channel 6 ;-).
gravesy56 said:
If its your router try another channel make sure its on a supported signal (a,b, g)... lastly ensure your router is excepting all devices. I know these are basic checklist items but sometimes these can get us. I had a laptop that would only work on channel 6 ;-).
Click to expand...
Click to collapse
Thanks guys for the suggestions...I don't think its related to my network setup as I have about 4 other devices able to obtain signals with no problems using DHCP.
Issues don't seem to be as severe on some of the most recent ROMs I've used but still not perfect.
Hello everyone,
Forgive me if this has already been asked, but after searching and searching thoroughly I was unable to find a solution.
I have the T Mobile HTC HD2, the phone is better than any iPhone I ever owned. (Just had to get that out... )
I have a question concerning the HTC CM Wifi Internet Sharing. I installed the app, ran it without any issues. The signal was picked up by one of my laptops. I was able to connect and surf the web over 3G, pretty quick I must say...
The issue I am having is, since connecting that one time, I have not been able to see the phone as a router since. When I run the app and choose T-Mobile data, the 3G pops up. The wireless antenna icon pops up and the app says it is ready to receive incoming connections. BUT, I am unable to see this from any of my wireless devices.
My questions are, is there any specific procedure to get this to run correct? Do I have to disable wireless on the HD2? Is there some WinMo 6.5 firewall running? I know others have experienced this, but I am unable to track down a solution.
Any advice would be greatly appreciated.
Thank you,
mcv50
Are you running the app through Settings-All Settings-Connections-Wifi Internet Sharing? Or running the WifiRouter app?
SxyCupcake said:
Are you running the app through Settings-All Settings-Connections-Wifi Internet Sharing? Or running the WifiRouter app?
Click to expand...
Click to collapse
I am running the app through Settings-All Settings-Connections-Wifi Internet Sharing
After i installed the cab, this is the only place I could find a way to launch the app.
Why is there another way?
I downloaded a random wifi sharing app and had the same problem, then found XDA-Tom_Codom CM Wifi Internet Sharing VGA. Worked like a charm. I would uninstall and try that one.
SxyCupcake, thanks for the suggestion.
I uninstalled, then installed the XDA-Tom_Codon CM Wifi Internet Sharing VGA.cab you suggested. I get the same result. I am rebooting right now to see if that may help...
After rebooting, I get the same thing. It almost seems like something is blocking the WiFi Transmit antenna signal or maybe it is not activating correctly... Might be a registry setting or something.
I may have fudged up some setting using BsB Tweaks or XT Hack Beta2... I might wind up just doing a complete restore and start from scratch.
Still doesn't work. I will check back often and post a solution if I figure it out.
Thank you,
mcv50
Q: My PC or Laptop is not seeing the SSID.
A: For the people having trouble seeing the network, make sure your pc displays adhoc connections and not just access points.
Now it is working...
Moved as not software release.
Hallo,
I have bought an POV mob 2 tablet whit android 2.1.
But WIFI doesnt work at my university.
I can choose the right WIFI account, but I can't connect with it.
Can somebody help me?
Thanks a lot, Lotte
Does it ask you for a password? If it does, you need to enter the password before you can connect to it. Ask the router's owner for the password or if the wifi belongs to the University meant for student use, then ask a technician or someone like that.
yeah, i found that at my uni they changed to a WPA-enterprise connection
what you need to do is find the exact settings (PEAP, ports, etc.) and in my case, i also needed to get a certificate to connect
in any case, best thing is to talk to the IT guys there, should at least point you in the right direction
ok this may be a simple thing im overlooking. at my work whenever i connect to wifi it asks for identity then password. with the photon it never asks for identity or i cant find a option to type the identity in therefore i cannot connect to wifi at work. it really sux cause i get bad coverage at work and rely on wifi. i know on some HTC phones i had in the past it would make me set up a screen lock for some reason before connecting, not sure if the motorola has some trick too but i cant figure this out and sprint customer care isnt much help either. anyone have any ideas?
Unfortunately you didn't specify the type of wifi your work uses?
It's obviously something beyond WPA/2... So what is it?
I found this thread on PEAP. See post #5 for a potential solution... Perhaps this will help with PEAP and other types? I'm not very familiar with the more advanced, enterprise forms of wifi unfortunately.
the main one i always connect to just says 802.1? some do say wpa and wep .. sorry im not familiar with the terminology of wifi networks. i just know i always hit connect and type the identity and password and im on.
ill try that app mentioned in the link.. thanks!
that worked! first phone ive owned were i needed a app to connect to a wifi network..