Related
My phone has a very noticeable delay on incoming calls. I'll see it light up and flash for a bit, take a few seconds to get caller ID, then it will finally ring once before going to voicemail. All the while the caller is hearing the phone ring but I'm not...I tested it. Since I don't stare at my phone all day I have a high volume of missed calls because many times I only get the last ring. Any ideas what's going on? I tinkered with settings in Advanced Config and DiamondTweak. No dice. I'm using the stock Fuze Rom.
Isn't this normal behavior?
I've set my Kaiser on GSM mode and I can hear calls coming in on my computer's speakers a full 2-3 seconds before the phone actually rings.
diar said:
My phone has a very noticeable delay on incoming calls. I'll see it light up and flash for a bit, take a few seconds to get caller ID, then it will finally ring once before going to voicemail. All the while the caller is hearing the phone ring but I'm not...I tested it. Since I don't stare at my phone all day I have a high volume of missed calls because many times I only get the last ring. Any ideas what's going on? I tinkered with settings in Advanced Config and DiamondTweak. No dice. I'm using the stock Fuze Rom.
Click to expand...
Click to collapse
I have the same problem (htc org. rom)
Maybe this will work
I noticed that when someone calls my phone, they get two rings before my ringtone turns on.
After a second, my Fuze's LED starts flashing, then my ringtone starts playing after another second.
I have an idea:
1. Go into "Start > Settings > Phone"
2. Go to the "Services" tab
3. Highlight "Call forwarding" and then click the "Get Settings..." button.
4. Change the "Forward after:" dropdown box to something higher (e.g. "30 seconds")
It won't help the ring delay, but I think this will give you a little more time before the call is sent to your voicemail. I haven't tried it, but let me know if that helps
NuShrike said:
Isn't this normal behavior?
I've set my Kaiser on GSM mode and I can hear calls coming in on my computer's speakers a full 2-3 seconds before the phone actually rings.
Click to expand...
Click to collapse
I wouldn't call this normal. This is the first mobile phone that I've had that has had delays that long. If I didn't keep my phone next to me for most of the day, I'd probably miss more of my calls as well.
adamantypants said:
I wouldn't call this normal. This is the first mobile phone that I've had that has had delays that long. If I didn't keep my phone next to me for most of the day, I'd probably miss more of my calls as well.
Click to expand...
Click to collapse
I agree with you, this lag is very big problem, I missed a lot of calls, most of people must call me again because they are forwarding to voicemail at first time before I find TP (I cannot change in forwarding to 30 sec.
I'm wondering how it is in Diamond.
This is very frustrating. Nothing seems to fix this problem. I've reduced the call ID match to five digits instead of eight. I've made sure that Ring Time is set to "without delay" in DiamondTweak. I'll try the idea to change the call forwarding time but this seems to be a major problem in the OS itself. With this issue, Voice Command problems, the GPS lag and other issues I might have to jump to another phone.
Do cooked ROMS have these same issues?
I've got the same issue.. using T.I.R. V8R ROM, so yes, this delay is present also on custom ROMS. It has to do with the dialer skin?
This was discussed in a thread on an app that causes the vibrate pattern to match the ring pattern in hacks & discussions (I think called VAlert). The vibrate pattern starts immediately and the ring is delayed so the app isn't perfect (unless you build a delay into the vibrate but that's separate). The solution seems to be an app from tweaks2k2.net that I hear removes the delay. This is an issue with all WM phones. I haven't tried tweaks2k2 but I hear it works.
the tweaks2k2 fix - to eliminate the 3 second ringer delay - didn't work for me. so i went into the network phone settings and set the call forwarding to 25 seconds (it was 10). that didn't fix the ringer delay but now at least my phone rings three or four times before going to voicemail. i guess that will have to do for now.
diar said:
the tweaks2k2 fix - to eliminate the 3 second ringer delay - didn't work for me. so i went into the network phone settings and set the call forwarding to 25 seconds (it was 10). that didn't fix the ringer delay but now at least my phone rings three or four times before going to voicemail. i guess that will have to do for now.
Click to expand...
Click to collapse
it don't work sorry
Doing some debugging, on the Fuze at least the ringer delay seems to be tied to the bloatedness of the dialer.. it has a whole bunch of imports so its loading alot of stuff up every time you get an incoming call.. I'm afraid the only solution for this will be a dialer that does not bring in those kind of dependancies (PTT, Video Share, G-Sensor, etc)
The fastest way to go would be using the default windows dialer, but you'd lose all that functionality.. but hey. It would ring instantly!
I'll look into stripping the dialer from my clean ROM and providing a cab..
Confirmed. Removed the AT&T dialer skin from my rom and called my phone, rang as fast as any other phone would.. So the dialer skin is indeed the culprit.
Dang AT&T. Dang them and all their bloatware.
I'm going to corporate store to complaint. To all of them within a 10 mile radios.
I've posted my Beta 1.5 with the dialer removed. It's not an official fix by AT&T, but it is a fix..
I'll see if I can whip up a .cab to stop the dialer from loading in the stock AT&T ROM, that should help there too.
i like this dialer...but not that much. how do i disable it? in advanced config, i saw an option to enable the phone dialer skin or the default windows mobile dialer. would switching to the default fix it without causing any other problems?
EDIT: switched to default dialer and that fixed it. it also seems to have fixed the problem of having to re-enter the data connection password after a soft reset.
This set of cab's should do the job for anyone who doesn't want to install Advanced Config (it's a single registry entry HKEY_LOCAL_MACHINE\Security\Phone\Skin - Enabled=0/1)
Wow it really is about two seconds before the phone rings. Hm I never missed a call yet on this phone. where do you keep your phone that it takes so long to answer it?
AT&T's network lets you set the number of seconds before the call rolls over to voicemail, as do others, I believe the default on AT&T is 20 seconds, with a minimum of 5 and a maximum of 30, so if someone has it set to 5, that leaves only 3 seconds..
Of course they could just set it higher, but that's a different issue
So then a simple fix would be to go into your voicemail and set it to 22 seconds and then you still have the same time to pick up that phone. But still how does the 2 second dely really make you miss all them calls?
On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
jimmynotch said:
On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
Click to expand...
Click to collapse
What format is the ring tone in?
My ringtone is the 'Oldphone2' and it is set at'vibrate and ring'. It just spontaneously started this non-ringing thing this morning prompted by no changing of settings. As I said, I tried messing around with the setting after it stopped ringing, but to no avail. And the frustrating thing is that everything else seems to work fine. Argh!
This may seem silly, but have you checked your ring volume? I've had a situation a few times, for no apparent reason after disconnecting from Activesync, where my ring volume was down to 0. Just a thought.
I HAVE SAME PROBLEM, when you turn all to vibrate only and turn it back up . the ring stop working
Yes. all volume settings are up. ringer volume, call volume, media player volume.... Any other suggestions?
i had the same problem just now.. but changing the ringtone back to the ATT default one fixed it. I also use S2U2 and changing the setting for "vibrate when answered" or something like that seems to have fixed it as well.
Hope that helps.
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
jimmynotch said:
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=412418
this happened to me too and i hard resetted. that fixed it , then it started again. come to find out th eproblem was when i hit the volume key on the side i turned system valume up and didnt click on ringer volume to turn it up . i had to smack myself
do texts ringer still work?? if so then im pretty sure you have the same problem i had, check it. good luck though
Do you have the unit face down? It has an auto mute when face down.
I also have an alarm problem, although lights go off, the alarm doesn't ring. I also have problems with ringing on incoming calls. The speaker otherwise works fine. Volumes are turned on appropriately. I have Natfv4.0 installed. Do any of the roms fix this problem?
So somehow the problem fixed itself. Dont know how as I didnt even touch my phone for two days. I just turned it on and -BOOM- it rang a few minutes later. Totally spontaneous issue. Really strange this phone is sometimes...
Boy, do I feel dumb.....Never even noted the un hi-lighted RING volume TAB...
I guess I can't use THAT excuse for not answering calls...
Thanks
Ron
I've been having the same problem. It's very baffling to say the least. I believe it was caused by the newer versions of S2U2. Don't know if it's been discussed in that thread or not. Both times this ringer 'glitch' has occurred, it's been when I've password protected S2U2 in settings. The issue was fixed by turning the password protection off, restarting S2U2, soft resetting my Fuze.
I am having the same problem with incoming calls not playing the ring tone and missing calls. I can guarantee you that the system/ring volume controls are at maximum. I have switched ring tones to no avail. It seems to have something to do with changing the ring type from ring to increasing ring and or visa versa. When I change ring type the problem exists. If I turn system/ring volume to silent and then back to maximum it plays the ring tone just fine. There is a bug in there somewhere! I also see a 'send text' lower left of screen and I hear a blurp sound or two in the background wihile the ringtone is playing when the phone is ringing. Anyone else have any issues like this? If so or you have a fix please send it to [email protected] I'm new to this forum stuff and don't really know how to use it. Hope I didn't break any rules.
Thank you,
Trent Alexander
I just have the callers complaining that I take too long to answer the phone. I called myself, and it took 3 1/2 rings for my Fuze to ring...anyone else?
Great PPC, Lousy Phone
Mine too. I just tried it and it does not ring until seven seconds after the light starts flashing. Not only that, it will not retain a custom ring tone. I try to use Old Phone 2 but it reverts to the default on its own.
My vario iv also suffers from the missing ring tone- reboots sometimes help but not always.
I too have had to learn not to rely on the alarm- goes off some days and then not on others.
Just now I thought that I would try to play an mp3 to see if that works- I pressed play and then waited for the track to start- no sound- seconds later the screen changed and touchflow launched itself (again) went back to the home tab and the sound is back?????
Same problem... it stopped ringing...
one thing I notice is that if the number calling is private or block it will only light up (no ring) but from a caller with Caller ID open the phone will ring...
strange...
I posted this on the Verizon forums and it was suggested that I also post here looking for an answer so here it goes.
My phone will randomly turn sound off. According to all sound profiles my sound is on and it should make noise when ringing or text messages come in. The problem is that the sounds will randomly turn off but not necessarily all of them. I may receive text notifications and not rings or vice versa or I may not receive either. Then randomly they will come back and I will receive all the sound notifications.
I recently had my phone replaced and once I got the new one it began doing the same thing. I just can't believe that it is a coincidence that I would get two phones (both brand new) that would do the same thing. In an effort to fix it I updated my firmware on my old phone and everything but did not help.
I love this phone and I don't want to get rid of it and I don't want to go back to the Verizon store if there is a fix for it.
Thanks in advance for any advice you may have.
Hi,
I also have an Omnia II. And I do not have those issues. But what I do know is that there is an option that if you flip your phone (with the screen facing ground) the sound will shut off if someone is calling. Like if you are in a meeting and someone is calling, you just turn your phone and the sounds is then silenced.
You can find these this setting in Start>Settings>Basic settings>Motion setting
(could be other names as I use a Dutch windows)
IannEefje said:
Hi,
I also have an Omnia II. And I do not have those issues. But what I do know is that there is an option that if you flip your phone (with the screen facing ground) the sound will shut off if someone is calling. Like if you are in a meeting and someone is calling, you just turn your phone and the sounds is then silenced.
You can find these this setting in Start>Settings>Basic settings>Motion setting
(could be other names as I use a Dutch windows)
Click to expand...
Click to collapse
This is the most likely problem. They set it up so that, even if the phone is tiled just slightly downward, the sound will be turned off. They really should have made it a more direct-downward position. If you turn that off and still have problems then check to make sure you're not activating a silent mode with the volume-down rocker on the side of the phone. Holding the rocker down for a few seconds will put the phone into either vibrate or silent. Hope you get it figured out!
"You know what really grinds my gears..."
Why does the phone vibrate when on a call? Seriously - this should be built into the operating system. A notification sound will suffice. It's so annoying to have a vibrations all on your earlobes. Is there a way (app) to configure this? Anyone else feel me or am I making a big deal about this?
Never noticed mine vibrate,
what is the notification for?
I turn off all in-call notifications though.
Sent from my SAMSUNG-SGH-I897 using XDA App
In-call notifications? Where is that? The vibrations come from sms messages.
Never noticed that.. but I have had the 'smart alarm' go off while I was talking on the phone. Was quite convenient.
And apparently it is audible enough to hear on the other end as several people have inquired as to what the noise was.
Sent from my SAMSUNG-SGH-I897 using XDA App
Mine doesn't vibrate when on call. Just gives a beep, maybe because I turn off vibrating notification in the sound and display setting
Wow. So I'm the only one that uses vibration for text messages? Also noticed it vibrates while charging - this also mystifies me because I don't see why anyone would need it to vibrate while being charged. Is this not common sense? I wonder if this happens with other android devices?
apollokid said:
Wow. So I'm the only one that uses vibration for text messages? Also noticed it vibrates while charging - this also mystifies me because I don't see why anyone would need it to vibrate while being charged. Is this not common sense? I wonder if this happens with other android devices?
Click to expand...
Click to collapse
No, this happened to me several times. I eventually just turned off the vibrations all together. I agree, it would be nice to get a notification tone in the ear if you have the vibrate function on.
Have you tried Handcent SMS? It has great customizations for the vibration feature, among other things. Even different vibration patterns for distinct individuals. Give it a shot - might be what you're looking for.
PersonOfKnownOrigin said:
No, this happened to me several times. I eventually just turned off the vibrations all together. I agree, it would be nice to get a notification tone in the ear if you have the vibrate function on.
Have you tried Handcent SMS? It has great customizations for the vibration feature, among other things. Even different vibration patterns for distinct individuals. Give it a shot - might be what you're looking for.
Click to expand...
Click to collapse
I need the vibrate alert far too much to disable it all together. I rarely hear my phone, but almost always feel it.
apollokid said:
Wow. So I'm the only one that uses vibration for text messages? Also noticed it vibrates while charging - this also mystifies me because I don't see why anyone would need it to vibrate while being charged. Is this not common sense? I wonder if this happens with other android devices?
Click to expand...
Click to collapse
Why would you not want it to vibrate while charging? During calls I could see (I have the same complaint actually), but why during charging?
+1 for a solution to this. Way too annoying when your on a call and you get a txt message but turning off vibrate is not an option.
BigJayDogg3 said:
Why would you not want it to vibrate while charging? During calls I could see (I have the same complaint actually), but why during charging?
Click to expand...
Click to collapse
Well, if the phone is charging its obviously plugged in. If its plugged in, its not in my pocket...its probably on a table or desk. Why do I want it to vibrate on the desk? If I'm not touching it, I can't feel it so an audible alert is good enough...
Its annoying sure, but I don't make enough phone calls for it to be really a bother. Oh well.
TheSopranos16 said:
+1 for a solution to this. Way too annoying when your on a call and you get a txt message but turning off vibrate is not an option.
Well, if the phone is charging its obviously plugged in. If its plugged in, its not in my pocket...its probably on a table or desk. Why do I want it to vibrate on the desk? If I'm not touching it, I can't feel it so an audible alert is good enough...
Click to expand...
Click to collapse
Is there a phone in the market that upon sensing external power it automatically switches notification type? Pike
I've had a quite a few smart phones (or so I thought) and don't recall any if them doing that.
Then again, if it's charging, it's not in your pocket. Switch notification to audible and problem solved. Takes all of one second.
a_fuegon said:
Is there a phone in the market that upon sensing external power it automatically switches notification type? Pike
I've had a quite a few smart phones (or so I thought) and don't recall any if them doing that.
Then again, if it's charging, it's not in your pocket. Switch notification to audible and problem solved. Takes all of one second.
Click to expand...
Click to collapse
All of my previous phones were running Symbian - none of them vibrated while on the phone or charging (moot point really).
Who wants to remember to switch their notifications to anything after a phone event happens? While you're at it, why not tell people to make sure they turn off their ringtones when they place or receive a call. Same logic. Doesn't make much sense to me...
I agree. Other phones I've had don't turn vibrate off when plugged in. I think they should, but they don't. So you can't really call this a "defect" with the Captivate.
However, I don't recall any of the other phones I've had vibrating in your ear when you are on a call. To me, that is a oversite with the dialer app and should be fixed.
I agree with you. I have had the think vibrate my ear off a few times.
One thing that really pisses me off is the dialer with an incomming call. ITs a pain in the ass to actually answer the call. Intead of it answering when you swipe, you have to go through 3 steps:
-Swipe
-pick end call or hold call
-swipe again to answer.
Im going to start a new thread to see if anyone knows how to answer call waiting instantly without these steps.
Here's an app I quickly made that disables the notificiation vibrator when in a call. It is a very simple/minimal app with no icons to run, or settings to change. Just don't uninstall while in a call or the vibrate setting will remain off. I only tried it with Call + Gmail vibrate.
hth
Got ya.
Its just a matter of how i use my phone. When my phone is charging, most of the time its on vibrate and i feel the vibration in the table/desk or hear it on my night stand.
I just didn't make the jump in logic.
Sent from my SAMSUNG-SGH-I897 using XDA App
apollokid said:
"You know what really grinds my gears..."
Why does the phone vibrate when on a call? Seriously - this should be built into the operating system. A notification sound will suffice. It's so annoying to have a vibrations all on your earlobes. Is there a way (app) to configure this? Anyone else feel me or am I making a big deal about this?
Click to expand...
Click to collapse
have you tried going to
settings
call settings
all calls
alerts on call
change to sound? i have my sms set to both sound and vibrate and when i am on a call i just hear a tone
apollokid said:
All of my previous phones were running Symbian - none of them vibrated while on the phone or charging (moot point really).
Who wants to remember to switch their notifications to anything after a phone event happens? While you're at it, why not tell people to make sure they turn off their ringtones when they place or receive a call. Same logic. Doesn't make much sense to me...
Click to expand...
Click to collapse
First off, my apologies for not proof reading my poor swyping abilities.
What I was trying to state is that if it bothers you so much that the phone should ring as opposed to vibrate when plugged in , it just takes a second to change the notification type. Not sure what is there that doesn't make sense?
The vibrating in your ear, is totally understandable, hence why i didn't comment on that. IF my phone vibrated while it's on my ear, i'd be upset too.
hondaguy said:
have you tried going to
settings
call settings
all calls
alerts on call
change to sound? i have my sms set to both sound and vibrate and when i am on a call i just hear a tone
Click to expand...
Click to collapse
I don't think you have sms vibrations set or maybe you're using non-stock rom - it's under the messages application. You had me for a minute cause I never checked call settings\all calls. Nonetheless - no that doesn't work. It still vibrates on a call.
aloant said:
Here's an app I quickly made that disables the notificiation vibrator when in a call. It is a very simple/minimal app with no icons to run, or settings to change. Just don't uninstall while in a call or the vibrate setting will remain off. I only tried it with Call + Gmail vibrate.
hth
Click to expand...
Click to collapse
Thanks I appreciate the effort. Unfortunately it seemed to turn off the vibrations all together. Lol. Even when I'm not on a call it doesn't vibrate. Can we get a second iteration? Please?
Thank you guys for the Handcent and ChompSMS suggestions. These seem to handle the message events the way I expect as they allow for in-call vibration alert customizations. Unfortunately they take over and get rid of my message puzzle pieces (cheezy I know, but I've grown to like those little things). I'm so picky - but that's what great about android right? Endless customizations!
I defintely would be interested in a less intrusive way to deal with the issue (i.e NoInCallVibrate)
Whenever I attend a phone call or call on messenger app the screen goes off immediately as if I have held the phone against my ear. Then I lose control of the phone completely. I can't put the call on loudspeaker as the screen is off. The screen comes back after a while when the other person on the call ends the call. Or I have to switch off my phone. This happens also when I play an audio file on Whatsapp, the screen goes off and I hear audio from the speaker adjacent to front camera.
My friends having same phone and Android version don't face this problem. I tried rooting my phone, installed a custom ROM AOSP [7.1.1_r12]Nougat for Nexus 5 [N4F26M] but the problem still persists. If anybody knows the FIX or any suggestion please reply.