My phone has a very noticeable delay on incoming calls. I'll see it light up and flash for a bit, take a few seconds to get caller ID, then it will finally ring once before going to voicemail. All the while the caller is hearing the phone ring but I'm not...I tested it. Since I don't stare at my phone all day I have a high volume of missed calls because many times I only get the last ring. Any ideas what's going on? I tinkered with settings in Advanced Config and DiamondTweak. No dice. I'm using the stock Fuze Rom.
Isn't this normal behavior?
I've set my Kaiser on GSM mode and I can hear calls coming in on my computer's speakers a full 2-3 seconds before the phone actually rings.
diar said:
My phone has a very noticeable delay on incoming calls. I'll see it light up and flash for a bit, take a few seconds to get caller ID, then it will finally ring once before going to voicemail. All the while the caller is hearing the phone ring but I'm not...I tested it. Since I don't stare at my phone all day I have a high volume of missed calls because many times I only get the last ring. Any ideas what's going on? I tinkered with settings in Advanced Config and DiamondTweak. No dice. I'm using the stock Fuze Rom.
Click to expand...
Click to collapse
I have the same problem (htc org. rom)
Maybe this will work
I noticed that when someone calls my phone, they get two rings before my ringtone turns on.
After a second, my Fuze's LED starts flashing, then my ringtone starts playing after another second.
I have an idea:
1. Go into "Start > Settings > Phone"
2. Go to the "Services" tab
3. Highlight "Call forwarding" and then click the "Get Settings..." button.
4. Change the "Forward after:" dropdown box to something higher (e.g. "30 seconds")
It won't help the ring delay, but I think this will give you a little more time before the call is sent to your voicemail. I haven't tried it, but let me know if that helps
NuShrike said:
Isn't this normal behavior?
I've set my Kaiser on GSM mode and I can hear calls coming in on my computer's speakers a full 2-3 seconds before the phone actually rings.
Click to expand...
Click to collapse
I wouldn't call this normal. This is the first mobile phone that I've had that has had delays that long. If I didn't keep my phone next to me for most of the day, I'd probably miss more of my calls as well.
adamantypants said:
I wouldn't call this normal. This is the first mobile phone that I've had that has had delays that long. If I didn't keep my phone next to me for most of the day, I'd probably miss more of my calls as well.
Click to expand...
Click to collapse
I agree with you, this lag is very big problem, I missed a lot of calls, most of people must call me again because they are forwarding to voicemail at first time before I find TP (I cannot change in forwarding to 30 sec.
I'm wondering how it is in Diamond.
This is very frustrating. Nothing seems to fix this problem. I've reduced the call ID match to five digits instead of eight. I've made sure that Ring Time is set to "without delay" in DiamondTweak. I'll try the idea to change the call forwarding time but this seems to be a major problem in the OS itself. With this issue, Voice Command problems, the GPS lag and other issues I might have to jump to another phone.
Do cooked ROMS have these same issues?
I've got the same issue.. using T.I.R. V8R ROM, so yes, this delay is present also on custom ROMS. It has to do with the dialer skin?
This was discussed in a thread on an app that causes the vibrate pattern to match the ring pattern in hacks & discussions (I think called VAlert). The vibrate pattern starts immediately and the ring is delayed so the app isn't perfect (unless you build a delay into the vibrate but that's separate). The solution seems to be an app from tweaks2k2.net that I hear removes the delay. This is an issue with all WM phones. I haven't tried tweaks2k2 but I hear it works.
the tweaks2k2 fix - to eliminate the 3 second ringer delay - didn't work for me. so i went into the network phone settings and set the call forwarding to 25 seconds (it was 10). that didn't fix the ringer delay but now at least my phone rings three or four times before going to voicemail. i guess that will have to do for now.
diar said:
the tweaks2k2 fix - to eliminate the 3 second ringer delay - didn't work for me. so i went into the network phone settings and set the call forwarding to 25 seconds (it was 10). that didn't fix the ringer delay but now at least my phone rings three or four times before going to voicemail. i guess that will have to do for now.
Click to expand...
Click to collapse
it don't work sorry
Doing some debugging, on the Fuze at least the ringer delay seems to be tied to the bloatedness of the dialer.. it has a whole bunch of imports so its loading alot of stuff up every time you get an incoming call.. I'm afraid the only solution for this will be a dialer that does not bring in those kind of dependancies (PTT, Video Share, G-Sensor, etc)
The fastest way to go would be using the default windows dialer, but you'd lose all that functionality.. but hey. It would ring instantly!
I'll look into stripping the dialer from my clean ROM and providing a cab..
Confirmed. Removed the AT&T dialer skin from my rom and called my phone, rang as fast as any other phone would.. So the dialer skin is indeed the culprit.
Dang AT&T. Dang them and all their bloatware.
I'm going to corporate store to complaint. To all of them within a 10 mile radios.
I've posted my Beta 1.5 with the dialer removed. It's not an official fix by AT&T, but it is a fix..
I'll see if I can whip up a .cab to stop the dialer from loading in the stock AT&T ROM, that should help there too.
i like this dialer...but not that much. how do i disable it? in advanced config, i saw an option to enable the phone dialer skin or the default windows mobile dialer. would switching to the default fix it without causing any other problems?
EDIT: switched to default dialer and that fixed it. it also seems to have fixed the problem of having to re-enter the data connection password after a soft reset.
This set of cab's should do the job for anyone who doesn't want to install Advanced Config (it's a single registry entry HKEY_LOCAL_MACHINE\Security\Phone\Skin - Enabled=0/1)
Wow it really is about two seconds before the phone rings. Hm I never missed a call yet on this phone. where do you keep your phone that it takes so long to answer it?
AT&T's network lets you set the number of seconds before the call rolls over to voicemail, as do others, I believe the default on AT&T is 20 seconds, with a minimum of 5 and a maximum of 30, so if someone has it set to 5, that leaves only 3 seconds..
Of course they could just set it higher, but that's a different issue
So then a simple fix would be to go into your voicemail and set it to 22 seconds and then you still have the same time to pick up that phone. But still how does the 2 second dely really make you miss all them calls?
I like to have my phone ring and vibrate, but randomly, the phone will change back to simply ringing. Any idea how to keep this ring type to vibrate and ring as default?
Same happens to me!
Same thing happens to me also!!!
And this phone has other bugs also....nice phone but comeon HTC...do some valid testing on it...
It's not random, but it is a glitch. When you use the volume control and go to silent or vibrate only and then change back, it changes the ring type. I have another thread going on this topic and someone else said they talked to HTC and it is a bug they were able to reproduce and will fix it in some future software upgrade, what ever that means.
it will also reset to ring only upon soft reset
I found a fix for this @ ppcgeeks. Install the ring and vib fix.cab. My TP2 now keeps its vibrate setting.
http://forum.ppcgeeks.com/showthread.php?t=83378&page=4
I posted this on the Verizon forums and it was suggested that I also post here looking for an answer so here it goes.
My phone will randomly turn sound off. According to all sound profiles my sound is on and it should make noise when ringing or text messages come in. The problem is that the sounds will randomly turn off but not necessarily all of them. I may receive text notifications and not rings or vice versa or I may not receive either. Then randomly they will come back and I will receive all the sound notifications.
I recently had my phone replaced and once I got the new one it began doing the same thing. I just can't believe that it is a coincidence that I would get two phones (both brand new) that would do the same thing. In an effort to fix it I updated my firmware on my old phone and everything but did not help.
I love this phone and I don't want to get rid of it and I don't want to go back to the Verizon store if there is a fix for it.
Thanks in advance for any advice you may have.
Hi,
I also have an Omnia II. And I do not have those issues. But what I do know is that there is an option that if you flip your phone (with the screen facing ground) the sound will shut off if someone is calling. Like if you are in a meeting and someone is calling, you just turn your phone and the sounds is then silenced.
You can find these this setting in Start>Settings>Basic settings>Motion setting
(could be other names as I use a Dutch windows)
IannEefje said:
Hi,
I also have an Omnia II. And I do not have those issues. But what I do know is that there is an option that if you flip your phone (with the screen facing ground) the sound will shut off if someone is calling. Like if you are in a meeting and someone is calling, you just turn your phone and the sounds is then silenced.
You can find these this setting in Start>Settings>Basic settings>Motion setting
(could be other names as I use a Dutch windows)
Click to expand...
Click to collapse
This is the most likely problem. They set it up so that, even if the phone is tiled just slightly downward, the sound will be turned off. They really should have made it a more direct-downward position. If you turn that off and still have problems then check to make sure you're not activating a silent mode with the volume-down rocker on the side of the phone. Holding the rocker down for a few seconds will put the phone into either vibrate or silent. Hope you get it figured out!
I've noticed that, for some reason, during the day my notifications won't sound. The phone will vibrate but I have missed calls, SMS, emails, etc. because of this. The phone is DEFINITELY on loud and I am NOT changing the volume in pocket (it happens with or without case). Everytime it happens, I checked my volume and it is all the way up.
Any ideas? PS - happens on any ROM
hah2110 said:
I've noticed that, for some reason, during the day my notifications won't sound. The phone will vibrate but I have missed calls, SMS, emails, etc. because of this. The phone is DEFINITELY on loud and I am NOT changing the volume in pocket (it happens with or without case). Everytime it happens, I checked my volume and it is all the way up.
Any ideas? PS - happens on any ROM
Click to expand...
Click to collapse
I had a similar issue that turned out to be due to my own mis-setting of CyanogenMod's quiet hours <.< 12PM is different than 12AM.
In your case it sounds like there is a setting somewhere that is preventing there from being a notification sound. Do you use stock messaging and gmail? Go into the settings for those applications (stock or non) and check to make sure its set correctly. Has this always been true? Have you tried doing a full factory reset? It sucks but its the best way to gauge whether or not you are experiencing a setting issue or if its really a hardware issue. Do your calls ring?
kenvan19 said:
I had a similar issue that turned out to be due to my own mis-setting of CyanogenMod's quiet hours <.< 12PM is different than 12AM.
In your case it sounds like there is a setting somewhere that is preventing there from being a notification sound. Do you use stock messaging and gmail? Go into the settings for those applications (stock or non) and check to make sure its set correctly. Has this always been true? Have you tried doing a full factory reset? It sucks but its the best way to gauge whether or not you are experiencing a setting issue or if its really a hardware issue. Do your calls ring?
Click to expand...
Click to collapse
I appreciate the help; I'll check quiet hours. As I stated, calls have the same problem. Notifications are definitely properly configured in their respective apps because I get the sounds sometimes.
Bump
Sent from my Nexus S using Tapatalk
hah2110 said:
I've noticed that, for some reason, during the day my notifications won't sound. The phone will vibrate but I have missed calls, SMS, emails, etc. because of this. The phone is DEFINITELY on loud and I am NOT changing the volume in pocket (it happens with or without case). Everytime it happens, I checked my volume and it is all the way up.
Any ideas? PS - happens on any ROM
Click to expand...
Click to collapse
In your Sound -> Volume Make sur ethe "Use incoming call volume for notificatons" radio is ticked. Turn ringer all the way up and see if you can hear your notifications.
Hello,
the last two days I missed a bunch of calls, then I realized that the ring tone doesn't work. I'am using the CM9 RC2 and until last Tuesday everything worked fine.
The music-player works and a the beep sounds too when I turn on the speaker volume.
Has someone a proposal what's wrong with my phone?
Thanks a lot, Daniel
PS: The vibration-alarm alarm doesn't work too. It must be a software problem! Then I turn the phone off, the short vibration works!
Which ringtone are you using? Sometimes it will change it by itself and not work. Also, if you are using the 'Digital Phone' ringtone it only rings once, but the ringtone 'Pyxis' (I believe) will loop it. Also check that the phone volume is not muted (the phone has a couple different volumes for media, alarms, and notifications).
AlphaEchoViktorSierra said:
Which ringtone are you using? Sometimes it will change it by itself and not work. Also, if you are using the 'Digital Phone' ringtone it only rings once, but the ringtone 'Pyxis' (I believe) will loop it. Also check that the phone volume is not muted (the phone has a couple different volumes for media, alarms, and notifications).
Click to expand...
Click to collapse
I set every volume settings to the highest value. Normally the different ringtones were played when i switch them but nothing, only silence.
Mea culpa, it has all been my fault! What a beginners mistake! The last days I tried different NFC automated settings and, don't ask me why, it activated the CM profile "Silent". I would have thought that the profile changes the settings in the ringtone menu too but it hasn't.
2 hours stress because of a little mistake!