Bicycle mount - LG Optimus 3D

I cycle to and from work every day, I always had my Desire mounted to my handlebars using this mount
does anyone know of any for the Optimus 3D?
I don't trust the universal ones, I'm after one that is specific to this phone so I know it will hold it tight, preferable so I can film my commute too (like I did on the Desire)
Anyone seen anything?

I've ordered on from eBay for £8 delivered (from Hong Kong). It's made specifically for the phone, I'll report back once it's arrived and I've tried it

truly awful!
the mount doesn't fit any handlebars I've seen and the bit the phone goes in is too small, certainly not made specifically for the phone!

Tweak it
I haven't tried this on O3D but have successfully used bike mounts on Optimus P500 and Motorola Defy (really good to use for both navigation and sports apps).
I did purchase one of those universal bike mounts, and it was TERRIBLE. So instead I got a hold of an original LG car mount. The piece itself which holds the phone snaps off from from the rest of the mount.
From the universal mount I pretty much just cut off anything but the piece which mounts the handle bar. I then melted the the plastic from both the original "snap on" piece and the universal mount, pressed them together, and then separated them. They now had a good fit, so I super glued the pieces together and man! the result is beyond what I could've hoped for.
It's very durable, doesn't take up a ton of space (unlike the universal monsters of mounts).
When I "melted" the pieces together I ensured to also include the slide on mechanism to release the mount. Therefore I can now get the O3D original car holder and just snap it on to my bike.
In order to do this, you will have to take a risk... but it was clearly worth it for me. I've used it a lot, both off road and on road.
I'll send a pic of it if you want.

I'd really like to see one or two pictures of your custom made mount.
I'm in need of a sturdy solution as well.

Will attempt taking some pics tomorrow, but only if the weather permits Quite stormy around London at this time.

dave79 said:
Will attempt taking some pics tomorrow, but only if the weather permits Quite stormy around London at this time.
Click to expand...
Click to collapse
So, you're from London!
My Home Team will face Chelsea FC in this year's CL final.
Hope your pics will exceed C's display in the forthcoming game.

becurious said:
So, you're from London!
My Home Team will face Chelsea FC in this year's CL final.
Hope your pics will exceed C's display in the forthcoming game.
Click to expand...
Click to collapse
Hehe, we will see what Bayern can do to induce harm.
It'll be hard to exceed Chelsea's upcoming display on May 19th

Pictures..
Here they are.
So, I was too lazy to put the P920 holder, so the P500 displayed in the pictures. It's the same type of clip attachment as the original P920 adapter... very easy to attach any LG device, as long as you have an original car mount.
Displayed on picture 2, is the assembly of a universal bike mount, cut into pieces and then a glued/melted original LG lock plate. So that any original LG car mount holder can be attached.
I've mostly used the P500 adapter with my old phone, and I've been going hard off road with my phone never coming off! It just works. The universal adapter I originally purchased was terrible keeping the phone steady.
The key to getting the mount secure was to get a tight fit, having the phone as close to the bar as possible. I was a little scared of sacrificing an original car mount, but it really paid off!

For those of us not so much into the diy thing (or for those like me who would end up paying almost as high as that buying the original lg car mount.. ) :
image in the attachment..
btw, it shows the optimus one, but seems to be the right thing as far as the description goes

V1P3R_BR4Z1L14N said:
For those of us not so much into the diy thing (or for those like me who would end up paying almost as high as that buying the original lg car mount.. ) :
image in the attachment..
btw, it shows the optimus one, but seems to be the right thing as far as the description goes
Click to expand...
Click to collapse
Escroto para cacete...HASUAIHAUAIASHAUASI
F***** ugly

Related

Brodit Active Holder for Nexus One

Just ordered me one of those.
I hate universal holders and I hate passive holders. This seems like the best choice right now, since the official merchandise is still not in sight...
http://www.pdashop.nl/product/90916/brodit-active-holder-google-nexus-one.html
I have one. It works super. You'll be really happy with it.
Google is missing the boat huge on this car dock.
That's good to hear, MadFlava. I had one of those for my previous phone (Touch Diamond) and that one has served me perfectly too.
Installed mine yesterday. I love it. The cords are ugly but I'll work on that when I get a chance.
Yup, I have one and would recommend them too
Well, received mine today, and... my Nexus One does not fit??? It will not slide far enough over the micro-usb connection.... any of you guys experienced anything like this?
It does not charge now... and there's like 2mm of space left between the bottom of my Nexus One and the holder.. I've used force to some extent, but it just will not slide any further..
Snooker said:
Well, received mine today, and... my Nexus One does not fit??? It will not slide far enough over the micro-usb connection.... any of you guys experienced anything like this?
It does not charge now... and there's like 2mm of space left between the bottom of my Nexus One and the holder.. I've used force to some extent, but it just will not slide any further..
Click to expand...
Click to collapse
I'm new here so I can't post links but go to androidforums.com and search for the thread ProClip Mounting System. In there you'll find a guy (dbpaddler) that has a lot of knowledge about these mounts. He's a re-seller for Brodit I think. Tell him about your problem and maybe he can help.
Snooker said:
Well, received mine today, and... my Nexus One does not fit??? It will not slide far enough over the micro-usb connection.... any of you guys experienced anything like this?
It does not charge now... and there's like 2mm of space left between the bottom of my Nexus One and the holder.. I've used force to some extent, but it just will not slide any further..
Click to expand...
Click to collapse
Sounds very odd. Can you post us a few pictures of what's going on?
See attachment. The micro-usb connector in the holder is about 4.5mm high, but my Nexus One will only slide over it like for 2mm and then it feels like it is blocked by something. I've used force, but no movement whatsoever.
I find it strange too.. I don't see anything odd on the connector, nor on the female connector on my Nexus One. I guess I'll take it back to the store...
How odd. It looks like the connector is slightly left of centre, if you use the trackball to be centre... no jiggling will make it fit?
It may look a bit off-centre due to my photography skills, it looks okay in real life. Jiggling or forcing does not help unfortunately. Of course the connector that came with my Nexus One charger fits nicely, and I don't see any peculiarities when I compare it to the one on the Brodit.
Anyhow, I logged an issue with the webshop that I bought it from and they happen to have a brick-and-mortar store some 50km from here, so I may drop by to demonstrate my problem. Thanks for your help.
Do you have a body skin on the phone?
Nope, no skin. Going to the store later today to have the holder replaced, they think it may just be a faulty unit. Will keep you all posted.
Well, guess what.... just returned from the store, and the replacement holder that they offered had exactly the same problem. The sales guy was as astonished as I was. Personally he had not sold any of these, since the Nexus One is officially not available yet here in the Netherlands, so demand is minimal, but it makes me wonder if I'm really the only one with this problem, and whether my specific Nexus One could be the problem...
Anyway, he took mine back and I was fully refunded, so kudos for pdashop.nl.
Downside: still no carmount for me.
I have one too, it does fit but, I had to wiggle it a little bit to get it in......
It was not just straight forward. I will have a go tonight and see if it still play hard to get.
anyway once plugged, it worked fine for me.
We (both me and the sales guy in the store) used force and wiggled, but to no avail. Besides, I don't want a holder that needs wiggling in the first place. I want it to fit perfectly. That's why I do not buy a universal holder but a Nexus-specific one.
I got mine and it fits perfect.
jeux_1 said:
I have one too, it does fit but, I had to wiggle it a little bit to get it in......
It was not just straight forward. I will have a go tonight and see if it still play hard to get.
anyway once plugged, it worked fine for me.
Click to expand...
Click to collapse
Yeah update, just tried and fitted like a glove. must have loosen up
does the charger model charge the phone at 500ma or 1000ma? can someone with one check the settings and see if it says charging usb or ac?
The Site is not in english. how do you guys understand what information to fill out when ordering? also can you guys please post some pics? with the dock already in place? just wondering what its going to look like in my car.

Ingenious Car Mount

Hey everyone,
I'm not sure how many of you are aware of this product but I just found it on sale at Canadian Tire here in Canada and I'm very impressed. It's just so convenient.. I can't believe I haven't seen this before. I am amazed by it, honestly.
http://www.tetrax.com/us
Look at the XWAY and FIXWAY primarily. I purchased the XWAY at Canadian Tire for $30 (regular $50). A little expensive compared to what I am used to, but I am very happy with it so far.
The reasons I like this solution:
Works with any type of device
Sturdy and secure. Even holds me 5" GPS (though I prefer to use Google Navigation )
Allows for the keyboard to be open on most (if not all) qwerty phones
Allows for portrait and landscape rotation
Is not visible when device is on the mount
Is very small and unobtrusive when device is not on the mount
There are no clips or snaps to fiddle with, just slide off the device
You can use this with 4 devices out-of-the-box as it comes with 4 different sized magnetic pads for your devices
This does not introduce a magnetic field to yoru device (the magnet is broken into 4 and arranged intelligently)
The negative things I've discovered about this solution:
You need a magnetic pad on each device you want to use
The XWAY can be accidentally pulled off the vent if you yank the device straight off of mount instead of sliding it off
Depending on your car vents, the angle that the device is pointed might not be ideal
I will post pix tomorrow if anyone is interested! The site has quite a few to look at until then.
Here's some pix!
I don't have photos of it in the car quite yet. I'll try to get some tomorrow morning.
Today I found the FIXWAY at BestBuy and decided that I might like that better since it can be positioned in a better spot in my car. My cars vents are not ideal since the steering wheel covers part of the screen when mounted there. However, even so, the XWAY has been by far the best car mount I've ever seen or used. The FIXWAY should be even better (for my particular car).
I also discovered that the FIXWAY doesn't actually get fixed to the car itself as I thought, but instead it uses a square magnet which you fix to your car. It actually comes with 2 of these in case you want to use this in 2 cars. Like the metal button that you stick to the phone, the square metal that goes on the car has 3M adhesive on the back. It's super strong, works great.
Anyway here's some photos of both the XWAY and FIXWAY I took in my living room.
Very interesting. But, in my feeling, the lack is that we can't orientate the phone ...
I guess it depends how your car's dashboard is angled. Mine faces me just fine and the videos I've seen it seems like most work out fine
And for rotation, you can rotate it any which way before or after your phone is mounted.
I have had the xway for about 2 months now and I love it. If you are attaching it to the vents their is really no reason to have to angle the phone. I agree that if you have some weird vent configuration it may be an issue.
check this - Toyota Avensis
http://forum.xda-developers.com/showpost.php?p=9979403&postcount=74
hudy said:
check this - Toyota Avensis
http://forum.xda-developers.com/showpost.php?p=9979403&postcount=74
Click to expand...
Click to collapse
Wow I guess I didn't so the best job at reading through that thread! I even posted a link from there to here on page 11. Good pix though! Thanks
Here are some pix of the FIXWAY in the car without the phone on it (all I had to take the pix was the phone). One of these days I'll remember to bring out the camera..
Oh, and good news... It seems that you can actually angle/tilt the phone with the FIXWAY. It must be the shape of the magnet or something, and the fact that the 'X' is rubber, I am able to tilt it and it holds in place. Not a lot, but enough that I was able to cut down on some glare on the drive home
That's pretty cool, And I actually lik the blob on the back of the phone
Seconded Mac, but I would have to take my soft shell off...........................
Did your DZ battery door come stock with the wording "With Google" on it ?
Smartenup said:
Seconded Mac, but I would have to take my soft shell off...........................
Click to expand...
Click to collapse
It should stick to any shell/case just fine I would think?
For some years I use some velcro (en.wikipedia.org/wiki/Velcro). The soft side on my phone, lighter. The hard side on the dash.
Costs almost nothing. Works very well, except in the summer when it is very hot (than the glue gets sticky)
AZ2ENVY said:
Did your DZ battery door come stock with the wording "With Google" on it ?
Click to expand...
Click to collapse
mine did
Sent from my HTC Vision using XDA Premium App
FINALLY took some photos.
I am still very much in love with this thing. My whole family has'em now, which is awesome because whenever I drive any of their cars I'm set
Is it weird that it reminds me of a tie fighter?
Thanks for the recommendation and all the pictures. Difficult to find a mount that doesn't interfere with the camera and/or volume buttons.

Original LG accessories: Kick Stand Hard Case & Multimedia Desk Dock

Woohoo, an Optimus 3D forum, finally!
Here are the first accessories Google found for me:
LG SDT-200 Multimedia Desk Dock For LG Optimus 3D
Part No: SDT-200
Turn your LG Optimus 3D into a multimedia powerhouse with the official desk dock.
http://www.mobilefun.co.uk/lg-sdt-200-multimedia-desk-dock-for-lg-optimus-3d-p27976.htm
About 25 GBP.
Mmm, powerhouse
------------------------------------------------------------
LG CCH-140 Kick Stand Hard Case - LG Optimus 3D
Part No: LG CCH-140
Stylish hard case with integrated kick stand made specifically for the LG Optimus 3D.
http://www.mobilefun.co.uk/lg-cch-140-kick-stand-hard-case-lg-optimus-3d-p27975.htm
About 16 GBP
Kick stand, nice!
LG Phoen Accessories
Hey buddy i have also found the multi-color case for my LG phone. I found the lg accessories at the best deals.
Although the kickstand is quite nice, I wish it were a 'full enclosure' case.
are there any desk dock which is not manufacturing by LG can be used for optimus 3D too
HDD_x8 said:
LG SDT-200 Multimedia Desk Dock For LG Optimus 3D
Part No: SDT-200
Turn your LG Optimus 3D into a multimedia powerhouse with the official desk dock.
http://www.mobilefun.co.uk/lg-sdt-200-multimedia-desk-dock-for-lg-optimus-3d-p27976.htm
About 25 GBP.
Click to expand...
Click to collapse
won't work, the USB connector is for when it's in portrait mode only so it thinks the USB connector is in the middle at the bottom, which it isn't
mmace said:
won't work, the USB connector is for when it's in portrait mode only so it thinks the USB connector is in the middle at the bottom, which it isn't
Click to expand...
Click to collapse
Just bought it so will let you know, I have the official car holder and its good, and the case mate pop which adds a little bulk to the phone but has the intergrated stand which is nice.
Description seems to have changed.
LG SDT-200 Multimedia Desk Dock For LG Optimus 2X
Part No: SDT-200
Product Reference: 27976
Turn your LG Optimus 2X into a multimedia powerhouse with the official desk dock.
Sent from my LG-P920 using XDA App
fen_nyc said:
Although the kickstand is quite nice, I wish it were a 'full enclosure' case.
Click to expand...
Click to collapse
http://www.case-mate.com/LG-Optimus-3D-Cases/Case-Mate-LG-Optimus-3D-Pop-Cases.asp
This is the case I use, bought the white one, it is very wonderful. Offers great protection, w/ rubber inside and plastic outside, and the rubber is also on the sides, and sticks out from the plastic a bit , so it sits on the rubber not the plastic to absorb the shock.
I'll take pictures of it later.
The official o3d dock is the sdt-190. Ive just had mine delivered from amazon. Seems pretty decent with the usb and micro hdmi ports replicated on the back. My only small gripe is you have to get the port covers on the phone in just the right angle for it to sit flush in the dock. Overall though im pretty happy with it.
Sent from my LG-P920 using XDA App
Are you still satisfied with the dock?
sdt 190
albert666 said:
Are you still satisfied with the dock?
Click to expand...
Click to collapse
i have it also, but im just 50% happy, i was expecting more, is pretty much the same as using it without , unless someone use it to watch movies, or idk
Again, I love the Dock but I dont understand the excitement if we cant connect a keyboard to it.. its just a stand in the end.. you still need to use the screen with your hands so might as well be holding it than being on a desk..
dock kb
cinemano said:
Again, I love the Dock but I dont understand the excitement if we cant connect a keyboard to it.. its just a stand in the end.. you still need to use the screen with your hands so might as well be holding it than being on a desk..
Click to expand...
Click to collapse
yeah, something like that, and as far as i know, the phone isn't compatible with any bluetooth keyboard yet, a protocol thing not being found on the phone, i haven't had the opportunity to test that though. And this last time, every time i connect the phone to the dock, it reboot automatically, very fast, and then all is ok, not sure what did i do wrong this time
brrvarus1987 said:
yeah, something like that, and as far as i know, the phone isn't compatible with any bluetooth keyboard yet, a protocol thing not being found on the phone, i haven't had the opportunity to test that though. And this last time, every time i connect the phone to the dock, it reboot automatically, very fast, and then all is ok, not sure what did i do wrong this time
Click to expand...
Click to collapse
Hi we desperately need a kernel that utilises the hardware capability of "USB On The Go"
Like FM radio was supported by the hardware, but there was no software to use the same, the LGO3D seems to have the hardware for USB OTG, but no software, which needs to be built in in the kernel.
hope you can help.
schubeir

[Q]Motorbike mount

Hi all,
I've just installed a 12v on my bike, now i want to mount my sensation on with a Holder, prefer waterproof? Does anyone have any suggestions, experience with one?
Hope you guys can help.
Thanks
I don't have a phone mount on my bike, but I do use RAM mount for my camera. Check out the RAM web site, I'm fairly sure I've seen some waterproof holders on there.
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
Found One, have ordered it will post nu review once i got it.
Sent from my HTC Sensation using xda premium
Oyoyewii said:
Found One, have ordered it will post nu review once i got it.
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
Maybe link to what you've ordered so that other people can see what you bought?
Mount for bikes with separate bars: (I'm using this on my moutain bike and a motorcycle with a homemade mount for the steering stem)
http://www.amazon.co.uk/gp/product/...29Q_1?ie=UTF8&m=A1JCK2KMJMH29Q&n=&s=&v=glance
Another mount for bikes with separate bars, but with a ball joint for easier positioning:
http://www.amazon.co.uk/gp/product/...29Q_2?ie=UTF8&m=A1JCK2KMJMH29Q&n=&s=&v=glance
Finally, a ball joint mount that goes in the steering stem for bikes with clipons: (note that there are three different sizes available dependent upon the size of your steering stem (oooer), so order the right one for your bike ; )
http://www.amazon.co.uk/gp/product/...29Q_4?ie=UTF8&m=A1JCK2KMJMH29Q&n=&s=&v=glance
The case in all of these appears to be the same. I can confirm that you can use the screen while it's in the case, but at the same time the case doesn't cause any accidental screen presses when it touches the screen on its own. The case will NOT be waterproof, but it will be splash/very light shower proof. If you have a screen I'd make sure it's mounted to a portion of the bars behind that. Rain at 70mph gets into pretty much everything as most bikers know if they ride all year round (boo ; ). The front of the case reduces legibility of the screen a bit, but so far in my use it's not been a problem as the sun is not due to re-appear here in the UK until June 23rd at approx 15:15, and then only for about ten minutes (My Scottish buddies will only get about five minutes sun, and my Welsh ancestors...who knows)
I'll have to ask "why"
I ride a sport bike and the phone stays in my jacket pocket, paired to a Jabra BT3030 bluetooth receiver.
Attached headset sends audio, navigation, and has ability to receive phone calls.
No risk of water or the phone accidentally falling off, and no clutter on the bike either.
I've got this one on my z1000
soeasyrider v4
It's perfect for the smartphone, the touch screen work across the protection, and there is a special place under the phone for an external battery.
When you park the bike, you only take with you the protection witch is scratch on the support. And all is waterproof, I ride 580Km with heavy rain, my sensation arrived dry, not like me
Now they make a smaller support for shorter trip.
Sorry for my english..
tblade2 said:
I'll have to ask "why"
I ride a sport bike and the phone stays in my jacket pocket, paired to a Jabra BT3030 bluetooth receiver.
Attached headset sends audio, navigation, and has ability to receive phone calls.
No risk of water or the phone accidentally falling off, and no clutter on the bike either.
Click to expand...
Click to collapse
http://www.arkon.com/accessories/phone_bike_mount.html
I've been using an Arkon mount and case since the light on my speedo went out. I leave work when it's dark, so it's impossible to see how fast I'm going on the freeway unless I use a speedo app (I use Speedview).
It's also cool for navigation; I've recently been apartment hunting, so I just put in the address of the apartment I'm going to check out and don't have to worry about finding it, in most cases. I like seeing the map in nav mode, since I scope out the area before on Google Maps and when I'm near I can recognize the area.
The case in the link has a cable slot, so you can charge your phone if you have a 12V adapter set up.
I ride a Suzuki GS500.
tblade2 said:
I'll have to ask "why"
I ride a sport bike and the phone stays in my jacket pocket, paired to a Jabra BT3030 bluetooth receiver.
Attached headset sends audio, navigation, and has ability to receive phone calls.
No risk of water or the phone accidentally falling off, and no clutter on the bike either.
Click to expand...
Click to collapse
It's nice to be able to see my GPS app as well as hear "Jane's" instructions at times. Probably not as important in the US, but over here in the UK with our chaotic old road network with millions of side turnings very close together and thousands of traffic circles, audio only can get very confusing ; )
Also, a few years ago I met a guy on a track day who was just getting back on a bike after a whole year of re-hab. He had fallen off with a phone in his chest pocket, flipped onto his front and it pushed THROUGH his ribs (shattering them) and doing a whole load of damage to his left lung etc. If you can avoid carrying anything hard on you at all while riding it really makes a lot of sense. Back packs are pretty lethal too if they have anything hard in them or the straps catch on something as you slide and tug your sholder down....I nearly lost the use of my left arm this way about seven years ago. I lug a crappy tank bag around with me eveywhere now which bores the heck out of me and gets in the way when I want to hang off in corners, but I figure it's better than the alternative. Sorry to sound like an old fart : )
---------- Post added at 06:27 PM ---------- Previous post was at 06:18 PM ----------
nonoz1000 said:
I ride 580Km with heavy rain, my sensation arrived dry, not like me
Sorry for my english..
Click to expand...
Click to collapse
Lol, nothing worse than getting wet underpants.....or having to pour water out your boots... ; ) Why do we do it?
tough break with the track accident. typically, track riding is pretty barebones - you could still put the phone in the tail and pair it up.
voice prompts speak the road names, so even with chaotic roads, that should cover it.
lol - that akron bike mount wont work with clip ons - I ride a GSXR750
either way, whatever works for you. I've gone thru many iterations and found that the external BT with a headset is most effective for me.
good luck

Bionic Dock DOES work.

So despite posts on here suggesting that our phone wouldn't work with the Standard Dock for the Bionic, I decided to take the plunge and snag one anyways ($10.99 w/free shipping on Amazon here if you're Prime). I figured I could eat the cost if it wouldn't work, and I also ordered a small micro usb 'extension cord' at the same time, to see if that would help.
The dock arrived today and I popped the phone on the dock - it doesn't sit flush in the cradle (as to be expected, the port is shifted to the left), but it does connect, the phone recognizes it's connected (and offers various dock modes), and it charges the device (when plugged in, of course).
I still may try and disassemble the device and shift the plug over to make it fit flush, but it does work as is.
Just figured I'd share in case anyone else just wanted a simple dock/charging station wasn't up to spending the $80+ that the A2 specific HD dock goes for.
chicknlil said:
So despite posts on here suggesting that our phone wouldn't work with the Standard Dock for the Bionic, I decided to take the plunge and snag one anyways ($10.99 w/free shipping on Amazon here if you're Prime). I figured I could eat the cost if it wouldn't work, and I also ordered a small micro usb 'extension cord' at the same time, to see if that would help.
The dock arrived today and I popped the phone on the dock - it doesn't sit flush in the cradle (as to be expected, the port is shifted to the left), but it does connect, the phone recognizes it's connected (and offers various dock modes), and it charges the device (when plugged in, of course).
I still may try and disassemble the device and shift the plug over to make it fit flush, but it does work as is.
Just figured I'd share in case anyone else just wanted a simple dock/charging station wasn't up to spending the $80+ that the A2 specific HD dock goes for.
Click to expand...
Click to collapse
If you have time, would you mind posting a picture of it sitting in the cradle for me? I would love to get one, but I'm picky about dumb things. Just wanted to see what I would be looking at.
Thanks.
skearton said:
If you have time, would you mind posting a picture of it sitting in the cradle for me? I would love to get one, but I'm picky about dumb things. Just wanted to see what I would be looking at.
Thanks.
Click to expand...
Click to collapse
Will do once I find batteries for my 'real' camera. So used to using the phone as a camera these days.
But I can tell you it sticks up and out, and looks awkward as hell. So it's probably not going to be aesthetically pleasing to you.
That's what I was thinking.
Maybe I can take a dremel to it?
Sent from my MB865 using Tapatalk 2
I have to apologize - I'm having a comedy of errors here when it comes to trying to get pictures (that aren't from the phone itself, at least). I can't find the main camera. I found an older camera but it's apparently dead (got a pretty purple grainy picture at my attempt). If I do happen to find that regular camera anytime soon, I'll snap some pictures.
In the meanwhile, I've linked to 2 pictures of the dock w/o the phone in it (taken by the phone, ofc) ... instead of sitting flush, the phone is over to the left about the length of my pinky. Please ignore my fat hands holding said dock.
https://www.dropbox.com/s/8mauz9yfq72htoa/2013-04-12 13.02.10.jpg
https://www.dropbox.com/s/6xwo6w8t4fpbzsx/2013-04-12 13.01.47.jpg
So I took it apart (and probably destroyed it, but oh well) ... there's 2 rubber pads on the bottom, one on each side. Beneath each pad are two small phillips head screws. Pop those four out and the device should separate. I tried making my own hole next to where it comes by default (stretching the cabling, flipping the shield, etc), even marking the usb so that it was extended out far enough. No dice. Worked briefly as a dock again but I wasn't happy with how unsteady it was and fiddled with it more, and now it doesn't recognize it as dock.
If anyone else wants to hack at it and is willing to cover your own shipping costs, toss me a PM and I'll be happy to send in onward.

Categories

Resources