Database Info

[Q] Stock Rom + Partitions

First of all,i am really happy to announce (for those who came across with my desperate threads trying to solve my battery drain over 3G network issue) that flashing XXJPU Rom + Removing the partitions (swap + external extra storage) of my SD Card solved my problem. Battery is not draining anymore,and everything is working just fine with the stock rom.
The question is : Can i partition my SD Card again (to add internal storage,since i´ve came across the damn "Internal Storage is Nearly Full" message) ?
If yes,will i have to reflash the rom or , do anything else then just creating the partition using the Minitool software ?
Thanks in advance,and thanks again for those who tried to help me !

No need to make a new partition, extend the current one by minitool/gparted

I have o only one big partition used to store normal content. I need to make a new one to use as a extra internal storage space.. So i do need to partition it, all i need to know is if it will work and if i will have to do something else after partitioning it
Sent from my GT-I5800 using XDA App

What can we do partition in our stock rom which would use as internal storage...? How to do it please teach me..
Sent from my GT-I5800 using XDA App

hadi_xman said:
What can we do partition in our stock rom which would use as internal storage...? How to do it please teach me..
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
If you create a partition on your SD Card as EXT2 ( i guess its EXT2 ) ,your OS will use it as internal storage.
Doing this,will solve the low internal storage issue.
I Just dont know if it works on stock roms,it does work on Kyrillos, inDroid, Sumee etc.

@OP i though u already had one partition when you said partition again
if your sd is as it is(just one partition)
then do this
flash g3mod
reboot into recovery
and partition
its the fastest way to get a partitio
then you can use an app2sd/data2sd script (system/etc/init.d)
Or if you have a card reader
use minitool/gparted to partition
shrink the existing one and make a new partiton(ext4)
and yea backup ur data, just in case!

cdesai said:
@OP i though u already had one partition when you said partition again
if your sd is as it is(just one partition)
then do this
flash g3mod
reboot into recovery
and partition
its the fastest way to get a partitio
then you can use an app2sd/data2sd script (system/etc/init.d)
Or if you have a card reader
use minitool/gparted to partition
shrink the existing one and make a new partiton(ext4)
and yea backup ur data, just in case!
Click to expand...
Click to collapse
Thanks for the reply : )
I will use minitool since i know how to use it.
After creating a EXT4 Partition,what will i need to actually tell my OS to use it as internal storage ?
Will i need to reflash rom ? Run any script (like Data2SD) ?
Also, is the Kernel or the Rom that actually recognizes the partitions and use them ?
EDIT : Hey @cdesai i just partitioned my SD using minitool creating a EXT2 Partition for internal storage upgrade.
Following again,this tutorial here : http://forum.xda-developers.com/wiki/index.php?title=SD_card_partitioning
Titaniun backup is not recognizing the extra space,what do i have to do now ?

marcelloLins said:
Thanks for the reply : )
I will use minitool since i know how to use it.
After creating a EXT4 Partition,what will i need to actually tell my OS to use it as internal storage ?
Will i need to reflash rom ? Run any script (like Data2SD) ?
Also, is the Kernel or the Rom that actually recognizes the partitions and use them ?
EDIT : Hey @cdesai i just partitioned my SD using minitool creating a EXT2 Partition for internal storage upgrade.
Following again,this tutorial here : http://forum.xda-developers.com/wiki/index.php?title=SD_card_partitioning
Titaniun backup is not recognizing the extra space,what do i have to do now ?
Click to expand...
Click to collapse
Hmm.
ext4 would be a bit better but ext2 is also ok
now keep an a2sd script in /system/etc/init.d
there is a thread in dev section by kyrillos with the script and instructions, use it
or flash a custom rom which already has it
and yes you need a kernel with init.d support, but every custom kernel has that feature(cf-root,fugumod,g3mod,simplicity,etc.)

marcelloLins said:
First of all,i am really happy to announce (for those who came across with my desperate threads trying to solve my battery drain over 3G network issue) that flashing XXJPU Rom + Removing the partitions (swap + external extra storage) of my SD Card solved my problem. Battery is not draining anymore,and everything is working just fine with the stock rom.
The question is : Can i partition my SD Card again (to add internal storage,since i´ve came across the damn "Internal Storage is Nearly Full" message) ?
If yes,will i have to reflash the rom or , do anything else then just creating the partition using the Minitool software ?
Thanks in advance,and thanks again for those who tried to help me !
Click to expand...
Click to collapse
use a custom room like indroid, kyrillos etc & enjoy after partition, set the restore location as "internal" in the titanium setting before restoring apps
Sent from my GT-I5800 using Tapatalk

Damn, i was trying to stick to a custom rom.
All right i will flash a custom rom.
Thanks for all the help guys
Sent from my GT-I5800 using XDA App

Best of luck
Sent from my GT-I5800 using Tapatalk

About increasing internal memory

Hi guys,
I've again have some stupid questions. I'm sorry if it was answered before, I didn't find. I'm using CM9 build #8.
1. I saw so many ways to use sd card partition to increase internal memory space. Which one should I use?
2. How can I partition my sd card(I have 8GB class 10) using phone(looks like my computer doesn't read sd card with the adapter)? Can someone give me full instructions(something like "1. do this 2. do that and etc")? I want to do everything carefully .
3. I see that I must have kernel, which supports ext partition. Which kernel should I use? I think this one should be the best, it has overclocking support too.
4. How can I install custom kernel?
5. Oh, and a little of topic question, do you think this(the part about ram) will really work?
Thanks. Please answer them .

Easyest way to repartition your sd is with recovery, there is pretty no way, to get it wrong, just remember ext partition, should be no more than 2GB and swap is 0.
About how to move app-s, there are a lot of scripts, my personal choice is S2E, its in the play store, becouse you can leave app data, on the internal memory which helps for smoothnes.
This kernel is good, but it wont work with stock rom, so you should choose some else, and this else is jaggy's or next gen.
Kernel is easy to install, just mount /system and /data, from recovery "mounts and storage" menu, then just flash the kernel, nothing needs to be wiped, or something else.
About the last question I havn't tryed it, but mostly I don't think there is need of something like that, Android know's what to do with the ram, it's not windows.
Oh and there is normal your PC to not find your ext partition if you are running windows system.

shortyoko said:
This kernel is good, but it wont work with stock rom, so you should choose some else, and this else is jaggy's or next gen.
Click to expand...
Click to collapse
I'm using cm9 build #8, will it work? By the way, can you give me a link to the file to download? Because there is only 7z files, which recovery doesn't read. And can I use phonec as usb storage after partitioning and using these scripts?
Thanks a lot .
Sent from my HTC Explorer A310e using xda app-developers app

zgintasz said:
I'm using cm9 build #8, will it work? By the way, can you give me a link to the file to download? Because there is only 7z files, which recovery doesn't read.
Thanks a lot .
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
CM9 already has a custom kernel which supports scripts.. So you dont need to flash a custom kernel.. And as far as the app2sd scripts go, itz a matter of personal choice.. Some people use S2E, because of its simplicity and ease of use, while others use complex ones like d2ext, int2ext, ungaze, etc.. And then there are some who like to use more complex scripts like Mount2SD, which gives options like S2E, but can be used from the terminal.. For eg, you can choose to mount dalvik, cache, app, data to the ext partition..
So, in short, to each his own..
Hope this helped.. :good:

bhargz16 said:
CM9 already has a custom kernel which supports scripts.. So you dont need to flash a custom kernel.. And as far as the app2sd scripts go, itz a matter of personal choice.. Some people use S2E, because of its simplicity and ease of use, while others use complex ones like d2ext, int2ext, ungaze, etc.. And then there are some who like to use more complex scripts like Mount2SD, which gives options like S2E, but can be used from the terminal.. For eg, you can choose to mount dalvik, cache, app, data to the ext partition..
So, in short, to each his own..
Hope this helped.. :good:
Click to expand...
Click to collapse
Thanks, there is one not answered question, can I use phone as usb storage after partitioning sd card and using these scripts?

zgintasz said:
Thanks, there is one not answered question, can I use phone as usb storage after partitioning sd card and using these scripts?
Click to expand...
Click to collapse
Ya ofcourse you can.. You can use it as usual..

help needed for cm9.1...

thanq for viewing ma thread.. i moderate noob cz i researched many things about rooting, flashing, etc., but still i have some confusions..
basically i rooted my htc explorer with jaggy rooting tutorial. so now i want to flash with [DEV][ROM][ICS][4.0.4][IMM76L]Unofficial CyanogenMod 9.1 for Pico Build#9 {3/11/2012} rom.. buti have somedoubts pls kindly clarify me..
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
2. now i have Yannou's recovery..can i flash thru that..
3. before flashing should i partition ma sd card or can we do dat after flashin?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 rom zip file to sd card.
4. i read that partition can also be done with recovery menu.. is that true. if yes. how to do that.. i read partition for s2e(http://forum.xda-developers.com/showthread.php?t=1859691- here) what about link2sd.. can we partion for link2sd by(http://forum.xda-developers.com/showpost.php?p=29724634&postcount=3 ) with that can we do.. will it work for cm9.1.
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
First time installing CyanogenMod 9 to your Htc Explorer/Pico, or coming from another ROM:
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps and CM9 ZIPs to your SDCard
- Boot into Recovery
- Flash CM9 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore data using Titanium Backup! they might cause FC's
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible! (metioned in http://forum.xda-developers.com/showthread.php?p=29938916) or (http://forum.xda-developers.com/showpost.php?p=33608084&postcount=2897).
please help me.. waitin for ua valuble reply..

Guide
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise

bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise
Click to expand...
Click to collapse
did u use CM9.1 .
is flashing process is same for yannou’s recovery.
i know about yannou’s recovery.. but what about CWM recovery.. from where i can get dat.. cus jaggy flashing process providing only yannou’s recovery.. so how can i shift to CWM recovery..

bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
is it necessary to wipe dalvik bcause i didnt do it and it works fine
Click to expand...
Click to collapse

No, no, stick with yannou's! Official cwm sometimes give's mounting issues with our phone, and sometimes if you drain fully your battery you'll get in to adventure.
Yes flashing process is the same, basikly everything is the same as cwm

Install ROM Manager on your phone and the first option should be to install Clockworkmod Recovery. Follow the instructions on screen. I'd use yannou's recovery though.
Yes, the instructions are the same for yannou's recovery.
And yes, I've used cm9.1 for over 2 months. I'm using HTC sense 4.0a rom by derefas right now
Remember to hit the thanks button! It won’t hurt, I promise

cool
shree alwaz said:
thanq for viewing ma thread..
Click to expand...
Click to collapse
Here is my opinion and instruction
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
Click to expand...
Click to collapse
I am not sure about the build #9 but build #11 is really cool.. Here is the link. U also get the link form the post u mention above under the page 305
http://teamthundersquad.blogspot.in/2012/11/cm-9-nightly-build-11-for-htc-explorer.html
But as far i heard nothing wrong with build#9 too. So try both..
Click to expand...
Click to collapse
2. now i have Yannou's recovery..can i flash thru that..
Click to expand...
Click to collapse
Nothing serious with this matter. Almost all recovery will work with this ROM. But my opinion is use TWRP recovery, it provide lot of feature also its provide touch support and ext partition support also....
Click to expand...
Click to collapse
3. before flashing should i partition ma sd card or can we do dat after flashing?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 ROM zip file to SD card.
Click to expand...
Click to collapse
its depends upon Ur need man. If Ur going to use internal memory increasing script u must have an 2nd partition in Ur SD card. ext2/3/4 is depend upon the memory script and ROM Ur going to use..
My Suggestion:
Try m2sd script with ext4 partition its work like a charm.. but i read from some post ext4 will damage SD sooner. but perform better. i am always need performance. but i am sure that till now no damage or performance issue occurred in my SD card as well as phone.
before or after partition is ur choice when u need partition u do it. But some ROM need 2nd partition while flashing be careful on that but cm9.1 doesn't need any support from sd card
Click to expand...
Click to collapse
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
Click to expand...
Click to collapse
Both the instruction telling the same thing for u. Here is my guide as same like they stated...
1.copy Ur ROM and GAPPS zip to ur SD-card
2.wipe all the partition data,cache,system,dalvik,etc... except SD-card
3.install ROM zip then install GAPPS zip.
4.Then reboot..
5.wait until u get the home screen.. first boot take some time so be patient
6.After that leave Ur phone for a minute then once again restart Ur phone.
7. final but important click thanks to the Developer and other who help u to install the ROM successfully..
this instruction is for clean installation this will never lead Ur device to problem
Click to expand...
Click to collapse

thanq u all.. but i have some clarification about partiton only.. can anybody give me guide about partitons for CM9.1 . which is best, simple and error free, wheather to go partition then flashing or flashing then partition.. and plz give me guide thru recovery.. and where its pre or post flashing.. pls do needful..

edit :
im unable to figure it out abot s2e scripts, int2sd scripts.. so please tell me actually what are those and how the linked with ext2/3/4 partitioms..

Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app

As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.

vasanth3008 said:
Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Can u explain what are those sd scripts. What it'll do with the partition. Plz explain me.
Sent from my HTC Explorer A310e using xda app-developers app

tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app

shree alwaz said:
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.

tatiraju.rishabh said:
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.
Click to expand...
Click to collapse
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app

Nobody don't know about ma query. Help me guys.
Sent from my HTC Explorer A310e using xda app-developers app

tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera

help
please temme. today i wanna flash the cm 9.1. plz temme which is best built9 or 11.. what do u people say which is best for daily use, all things should work, games should support like backstab, shadowgun, nfs mostwanted like that.. and it should not drain fast.
n i wanna make partition of ma 8GB class4 sd card before flashing using mini partiton tool. so which is best ext2/3/4 or fat32. n which is best link2sd, mount2sd or anything else. and i no need to create/modify/change the mounts for those apps to use.. cz im not able to figure out what is that mounts acctually. n what is the use of those mount. if anybody explains about those im very much gladful.
n before partition i need to take backup.. it mean i need just copy paste the all the folder which are there in sd card.. its that correct or any method to use.. to get backup.
finally give me exact intraction to flash.. consider i had partiton sd card..
pls help.. ill make flash n wanna eat icecream sandwich today it self.. :crying:

ZaKa123 said:
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera
Click to expand...
Click to collapse
I never had any of those problems.
---------- Post added at 05:56 PM ---------- Previous post was at 05:48 PM ----------
shree alwaz said:
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I never used Mount2SD and never will, cos link2sd works well for me.
Here is what i did:
1. Partition microSD with format ext2. (I used Minitool Partition Wizard for this. A freeware program for Windows)
2. Insert it in the phone, download Link2SD from Play Store.
3. Open Link2SD, it will prompt you to select your partition type. Select ext2.
4. Link2SD will create a mount script and ask you to restart the phone. Do so.
5. After restart, go back to Link2SD, press menu button to open menu.
6. Open "Settings". Make sure "Auto link" is ticked.
7. Exit Link2SD, do a restart.
Thats it! now whenever i install an app, Link2SD sends it to the partition automatically.
Sometimes you may get a phone memory full notification. In that case power off your phone and on it again.
EDIT: all this was done with CM9.1 previously installed.

So what are steps to install cm9.1.
Is it necessary to clear dalvik cache.
Sent from my HTC Explorer A310e using xda app-developers app

[Q] Best way for app2sd?

Guys I m newbie.
Want to know what is the best script or app or MOD which is best for moving apps and data to external memory and will help improving performance of our phone.
I am using Gingersnap 2.3 by neko, but s2e does not work on it?
Please hepl me with this.
Is this mod is safe to use?( Interactive Data2sd )
http://forum.xda-developers.com/showthread.php?t=1042828

Search for cronmod and you can choose a2sd, d2ext or intext

imloy said:
Guys I m newbie.
Want to know what is the best script or app or MOD which is best for moving apps and data to external memory and will help improving performance of our phone.
I am using Gingersnap 2.3 by neko, but s2e does not work on it?
Please hepl me with this.
Is this mod is safe to use?( Interactive Data2sd )
http://forum.xda-developers.com/showthread.php?t=1042828
Click to expand...
Click to collapse
http://www.xda-developers.com/android/move-selected-apps-to-sd-with-link2sd-app/

Also for me Link2SD is the best solution, I've a rooted phone with stock rom, I followed the guide and I choose to put 1 GB in the second partition for APP. Now after 1 year I've more than 500 addition MB of apps!

rodem77 said:
Also for me Link2SD is the best solution, I've a rooted phone with stock rom, I followed the guide and I choose to put 1 GB in the second partition for APP. Now after 1 year I've more than 500 addition MB of apps!
Click to expand...
Click to collapse
I am a big fan of cronmod's scripts. You can put the script in the init.d folder of the rom's .zip before you flash it, or you can flash one of cronmod's .zips immediately after flashing a ROM (before first boot).
I like them because they are fully automatic. You can install tons of apps, and they get put on your sd-ext without having to link them, or do anything to them. I used link2sd for a long time before I found cronmod's scripts. After a while I still ended up running out of space, and I would have to go back into link2sd to figure out what ELSI I could link.
With cronmod's scripts your internal folders ( like /data or /data/app depending on the script) get automatically mounted to to sd-ext. This effectively adds to your internal storage. I see it as more of a fix, while link2sd is more like a band-aid.
Sent from my LG-VM670 using xda app-developers app

upconvert said:
I am a big fan of cronmod's scripts. You can put the script in the init.d folder of the rom's .zip before you flash it, or you can flash one of cronmod's .zips immediately after flashing a ROM (before first boot).
I like them because they are fully automatic. You can install tons of apps, and they get put on your sd-ext without having to link them, or do anything to them. I used link2sd for a long time before I found cronmod's scripts. After a while I still ended up running out of space, and I would have to go back into link2sd to figure out what ELSI I could link.
With cronmod's scripts your internal folders ( like /data or /data/app depending on the script) get automatically mounted to to sd-ext. This effectively adds to your internal storage. I see it as more of a fix, while link2sd is more like a band-aid.
Sent from my LG-VM670 using xda app-developers app
Click to expand...
Click to collapse
Hi, thankyou for the tips, yes link2sd will not give you infinite space, once you start to have a lot of apps, them continue to write some data (cache, etc.) on your internal memory and this will lead you to fill your internal memory. So in my opinion with a non rooted phone, simple move app to sd is like a band-aid while link2sd on rooted phone is like a powerfull band-aid.
About the script, it will move ALL and let you to install infinite apps? I've readed that these kind of script give you also some stability problem on some apps and also decrease speed of the phone while for now, with link2sd i've no problem at all, I moved also gapps.

rodem77 said:
Hi, thankyou for the tips, yes link2sd will not give you infinite space, once you start to have a lot of apps, them continue to write some data (cache, etc.) on your internal memory and this will lead you to fill your internal memory. So in my opinion with a non rooted phone, simple move app to sd is like a band-aid while link2sd on rooted phone is like a powerfull band-aid.
About the script, it will move ALL and let you to install infinite apps? I've readed that these kind of script give you also some stability problem on some apps and also decrease speed of the phone while for now, with link2sd i've no problem at all, I moved also gapps.
Click to expand...
Click to collapse
Im using cronmod (int2ext+) and I haven't experienced any problems, I guess (haven't tested) they just released a script that will work with 4.2.1 The only app that ive seen with noticeable lag was titanium backup, but other than that its been great
Ive also used link2sd and that works extremely well also.

rodem77 said:
Hi, thankyou for the tips, yes link2sd will not give you infinite space, once you start to have a lot of apps, them continue to write some data (cache, etc.) on your internal memory and this will lead you to fill your internal memory. So in my opinion with a non rooted phone, simple move app to sd is like a band-aid while link2sd on rooted phone is like a powerfull band-aid.
About the script, it will move ALL and let you to install infinite apps? I've readed that these kind of script give you also some stability problem on some apps and also decrease speed of the phone while for now, with link2sd i've no problem at all, I moved also gapps.
Click to expand...
Click to collapse
Obviously, not infinite, but on my ov I have about 180 mb for my data partition. Using the d2ext script with a 2 gb sd-ext partition means that I increase that by literally over 1000%. I have absolutely no stability problems with the scripts. Sometimes a particular rom won't boot with a particular script, but I've always been able to find at least one script that will play nice with any rom I've used.
I really liked link2sd when I started using it, but eventually running out of space again, and constantly having to link apps got old. The script will move ALL of your apps without you having to tell it what to do, and your apps will still "think" they are installed on the phone, so widgets will work fine.

thanks!!!!!
Thanks guys!!!
I m now using int2ext+ by cronmod ....works perfect!!!!
very stable and smooth...:good:
:angel:

1st time flashing with atrix 2

I just got an atrix 2 running jb (stock leak 3). I want to dual boot it with cm11 but have some questions that I would like to have answered before I mess up with my phone.
I have installed bmm from play store.
In recovery I took a backup of cid but I dont know where its saved so first I'd like to copy it to SD card and by what name it's saved.
Second thing I want to know is that can I install ROM on first partition ? Because I read that I should keep 1st n 2nd partition for system.
And while partitioning sys4 I saw that minimum space for cache is 300 mb but I want it 50mb. How to reduce it?
the amount of data I give for 4th system will be reduced from 8gb of ROM? Because I currently have 5.x GB and 4 will be less for me so can't we install ROM on 1st or share data partition between 2.
And is there something else I need to take care of before I start?
Thanks in advance.
PS I've googled before posting these and have been familiar with an android before.
Sent from my ME865 using xda app-developers app

siddharth1102 said:
I just got an atrix 2 running jb (stock leak 3). I want to dual boot it with cm11 but have some questions that I would like to have answered before I mess up with my phone.
I have installed bmm from play store.
In recovery I took a backup of cid but I dont know where its saved so first I'd like to copy it to SD card and by what name it's saved.
Second thing I want to know is that can I install ROM on first partition ? Because I read that I should keep 1st n 2nd partition for system.
And while partitioning sys4 I saw that minimum space for cache is 300 mb but I want it 50mb. How to reduce it?
the amount of data I give for 4th system will be reduced from 8gb of ROM? Because I currently have 5.x GB and 4 will be less for me so can't we install ROM on 1st or share data partition between 2.
And is there something else I need to take care of before I start?
Thanks in advance.
PS I've googled before posting these and have been familiar with an android before.
Sent from my ME865 using xda app-developers app
Click to expand...
Click to collapse
1. Cid backup can found here /sdcard/clockworkmod/firmwar...keep this copy in your computer just in case u format sdcard.
2. U can install ROM in system1..but just make sure after installing ROM and gapps...in bmm menu select system keeper and install bmm.
3. To my knowledge I guess 300mb is least apace for cache.
Sent from my MB865 using XDA Premium 4 mobile app

mithun23 said:
1. Cid backup can found here /sdcard/clockworkmod/firmwar...keep this copy in your computer just in case u format sdcard.
2. U can install ROM in system1..but just make sure after installing ROM and gapps...in bmm menu select system keeper and install bmm.
3. To my knowledge I guess 300mb is least apace for cache.
Sent from my MB865 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
By system keeper do you mean selecting it as default boot partition? And I guess we can also do it afterwards by going into bmm again if not having bmm will still give us that android logo on boot.
Will cache also be used for data partition?
Thanks for fast reply
Sent from my ME865 using xda app-developers app

siddharth1102 said:
By system keeper do you mean selecting it as default boot partition? And I guess we can also do it afterwards by going into bmm again if not having bmm will still give us that android logo on boot.
Will cache also be used for data partition?
Thanks for fast reply
Sent from my ME865 using xda app-developers app
Click to expand...
Click to collapse
No...to install custom ROM (cm11) in system1...first u have to formats system data cache of sysytem1 in bmm..then u will install ROM gaps...so bmm will be deleted, then bmm tries to install itself by force ..but to be in safer side just install bmm in system keeper.
Sent from my MB865 using XDA Premium 4 mobile app