Related
Please any one help me how to.use ungaze data2sd with complete details
Mahesh
http://forum.xda-developers.com/showthread.php?t=1042828
http://forum.xda-developers.com/search.php
All the details are in the thread what don't you understand
Sent from my LG-P500 using XDA Premium App
dislplin01 said:
All the details are in the thread what don't you understand
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
How to move file using data 2sd
Mahesh
mvgadagi said:
How to move file using data 2sd
Mahesh
Click to expand...
Click to collapse
well if you want the full use of data2sd by ungaze then the first step is partition your sd card after you do that then i would suggest flashing a your rom fresh and whatever MODs you have after you have flashed all mods and your ROM {please reboot between each MOD} then finally flash ungazes data2sd if you did it right you will have a large performance boost and more space for apps for example i had a 16 gig sd card made 2560 mb partition and now after flashing data2sd i have 1.7 gigs of apps space and a quadrant score of 2300 so if you have questions then PM me
dislplin01 said:
well if you want the full use of data2sd by ungaze then the first step is partition your sd card after you do that then i would suggest flashing a your rom fresh and whatever MODs you have after you have flashed all mods and your ROM {please reboot between each MOD} then finally flash ungazes data2sd if you did it right you will have a large performance boost and more space for apps for example i had a 16 gig sd card made 2560 mb partition and now after flashing data2sd i have 1.7 gigs of apps space and a quadrant score of 2300 so if you have questions then PM me
Click to expand...
Click to collapse
please, tell me the steps
i want flashing void forever :
- partition sdcard ext2+fat32 (is swap have an effect?)
- flash the void forever rom
- flash add on void forever
- reboot(?)
- flashing ungaze data2sd
- reboot
- done
but i have some problem on it
- sometimes bootloop
- i cant instal any apk, the button wont respond
- else, the ext2 partition i created is gone, when i check with titanium backup
i just tried it around 2 days and still have that problem
and sorry for my bad english
lightnoid said:
please, tell me the steps
i want flashing void forever :
- partition sdcard ext2+fat32 (is swap have an effect?) EXT4 recomended
- flash the void forever rom
- Reboot
- flash add on void forever
- reboot(?)
- flashing ungaze data2sd
- reboot
- done
but i have some problem on it
- sometimes bootloop
- i cant instal any apk, the button wont respond
- else, the ext2 partition i created is gone, when i check with titanium backup
i just tried it around 2 days and still have that problem
and sorry for my bad english
Click to expand...
Click to collapse
answers in bold
is it ok with ext4?
in http://forum.xda-developers.com/showthread.php?p=13049131#post13049131 said that Ungaze Data2Sd not support ext4 and ext3
dislplin01 said:
well if you want the full use of data2sd by ungaze then the first step is partition your sd card after you do that then i would suggest flashing a your rom fresh and whatever MODs you have after you have flashed all mods and your ROM {please reboot between each MOD} then finally flash ungazes data2sd if you did it right you will have a large performance boost and more space for apps for example i had a 16 gig sd card made 2560 mb partition and now after flashing data2sd i have 1.7 gigs of apps space and a quadrant score of 2300 so if you have questions then PM me
Click to expand...
Click to collapse
Hi all,
Currently I'm using CM7 and install ungaze data2sd on my phone. I already have ext2 file and my phone shows additional internal memory. I then install apps without any problem and once done, I try to reboot it. However, I found that those apps which installed earlier on were gone. Can anyone help me with this?
Addition, when I check the sd card, I found an d2sd folder and inside it have unknown files named error_0222120031, error_0222120039, error_0222120122 and error_0222120143. Can anyone help me with this?
missing market??
After flashing ungaze... I reboot then somehow my market app is missing but when i used the search function i can still search it and use it... Then after two reboot (not necessarily simultaneous) i got my market back... Using nightly four e 4.2 with ta.gb 1.2 kernel...
alexdino89 said:
Hi all,
Currently I'm using CM7 and install ungaze data2sd on my phone. I already have ext2 file and my phone shows additional internal memory. I then install apps without any problem and once done, I try to reboot it. However, I found that those apps which installed earlier on were gone. Can anyone help me with this?
Addition, when I check the sd card, I found an d2sd folder and inside it have unknown files named error_0222120031, error_0222120039, error_0222120122 and error_0222120143. Can anyone help me with this?
Click to expand...
Click to collapse
you need a freshly installed rom... do a full wipe then flash a custom rom and then flash this ungaze data2sd mod but i recommend you to use app2sd mod by darktremor that is quite stable and very easy to use
Sent from my LG-P500 using xda premium
amao10 said:
After flashing ungaze... I reboot then somehow my market app is missing but when i used the search function i can still search it and use it... Then after two reboot (not necessarily simultaneous) i got my market back... Using nightly four e 4.2 with ta.gb 1.2 kernel...
Click to expand...
Click to collapse
i guess your market get frosted use titanium backup or anyother app to defrost market app
Sent from my LG-P500 using xda premium
amao10 said:
After flashing ungaze... I reboot then somehow my market app is missing but when i used the search function i can still search it and use it... Then after two reboot (not necessarily simultaneous) i got my market back... Using nightly four e 4.2 with ta.gb 1.2 kernel...
Click to expand...
Click to collapse
Lol. I see. well I try to continue use it who knows my apps that had gone will reappear. lol!! Thanks for your comment bro!
abhinav quietly brilliant said:
you need a freshly installed rom... do a full wipe then flash a custom rom and then flash this ungaze data2sd mod but i recommend you to use app2sd mod by darktremor that is quite stable and very easy to use
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
I disagree ..
My suggestions -
1) use ungaze v5 (not v2)
2) wipe dalvick cache before flashing it..
It doesn't matter whether it's Fresh rom or not..
I have used ungaze with having more than 120mb worth apps previously
Sent from my LG-P500 using Tapatalk
androidusero1p500 said:
I disagree ..
My suggestions -
1) use ungaze v5 (not v2)
2) wipe dalvick cache before flashing it..
It doesn't matter whether it's Fresh rom or not..
I have used ungaze with having more than 120mb worth apps previously
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
ungaze script is not stable have alot of bugs.. and i have approx 746mb of apps installed which is stored on sd-ext and my internal memory used is only 63mb using dt script.. no issues with dt script
Sent from my LG-P500 using xda premium
androidusero1p500 said:
I disagree ..
My suggestions -
1) use ungaze v5 (not v2)
2) wipe dalvick cache before flashing it..
It doesn't matter whether it's Fresh rom or not..
I have used ungaze with having more than 120mb worth apps previously
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
I have 1.3gig apps on sd n ungaze has been the best ever for me for me it's 100%bugfree !
Sent from my LG-P500 using Tapatalk
androidusero1p500 said:
I disagree ..
My suggestions -
1) use ungaze v5 (not v2)
2) wipe dalvick cache before flashing it..
It doesn't matter whether it's Fresh rom or not..
I have used ungaze with having more than 120mb worth apps previously
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
V5?? How to find version 5 of Ungaze?? Do you have the link?? Because currently I'm using the v4b5.
Please help me in this issue !
i installed ungaze script to increase internal memory 190MB to 0.89GB
it worked fine.
After every reboot the internal memory get back to default state.
as stated in trouble shooting i removed my sd in recovery mode and mounted sd ext by reinserting the sd and it works like charm.
but it cant be done in normal system reboot. so anybody please help me in this issue.
Thanks in advance for your helps.
Sent from: Samsung Galaxy y -Custom Rom-merruks 2.5 Kernel
============================================================================================
============================================================================================
Hit THANKS if u like my issue
WANT TO MAKE YOUR GALAXY Y AS A HIGH END DEVICE WITH 1.2GHZ , 1 GB INTERNAL STORAGE , HD GAMING , LAGGLESS
GO THE BELOW LINK
EMPOWER YOUR GALAXY Y
Click here
thanq for viewing ma thread.. i moderate noob cz i researched many things about rooting, flashing, etc., but still i have some confusions..
basically i rooted my htc explorer with jaggy rooting tutorial. so now i want to flash with [DEV][ROM][ICS][4.0.4][IMM76L]Unofficial CyanogenMod 9.1 for Pico Build#9 {3/11/2012} rom.. buti have somedoubts pls kindly clarify me..
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
2. now i have Yannou's recovery..can i flash thru that..
3. before flashing should i partition ma sd card or can we do dat after flashin?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 rom zip file to sd card.
4. i read that partition can also be done with recovery menu.. is that true. if yes. how to do that.. i read partition for s2e(http://forum.xda-developers.com/showthread.php?t=1859691- here) what about link2sd.. can we partion for link2sd by(http://forum.xda-developers.com/showpost.php?p=29724634&postcount=3 ) with that can we do.. will it work for cm9.1.
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
First time installing CyanogenMod 9 to your Htc Explorer/Pico, or coming from another ROM:
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps and CM9 ZIPs to your SDCard
- Boot into Recovery
- Flash CM9 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore data using Titanium Backup! they might cause FC's
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible! (metioned in http://forum.xda-developers.com/showthread.php?p=29938916) or (http://forum.xda-developers.com/showpost.php?p=33608084&postcount=2897).
please help me.. waitin for ua valuble reply..
Guide
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise
bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise
Click to expand...
Click to collapse
did u use CM9.1 .
is flashing process is same for yannou’s recovery.
i know about yannou’s recovery.. but what about CWM recovery.. from where i can get dat.. cus jaggy flashing process providing only yannou’s recovery.. so how can i shift to CWM recovery..
bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
is it necessary to wipe dalvik bcause i didnt do it and it works fine
Click to expand...
Click to collapse
No, no, stick with yannou's! Official cwm sometimes give's mounting issues with our phone, and sometimes if you drain fully your battery you'll get in to adventure.
Yes flashing process is the same, basikly everything is the same as cwm
Install ROM Manager on your phone and the first option should be to install Clockworkmod Recovery. Follow the instructions on screen. I'd use yannou's recovery though.
Yes, the instructions are the same for yannou's recovery.
And yes, I've used cm9.1 for over 2 months. I'm using HTC sense 4.0a rom by derefas right now
Remember to hit the thanks button! It won’t hurt, I promise
cool
shree alwaz said:
thanq for viewing ma thread..
Click to expand...
Click to collapse
Here is my opinion and instruction
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
Click to expand...
Click to collapse
I am not sure about the build #9 but build #11 is really cool.. Here is the link. U also get the link form the post u mention above under the page 305
http://teamthundersquad.blogspot.in/2012/11/cm-9-nightly-build-11-for-htc-explorer.html
But as far i heard nothing wrong with build#9 too. So try both..
Click to expand...
Click to collapse
2. now i have Yannou's recovery..can i flash thru that..
Click to expand...
Click to collapse
Nothing serious with this matter. Almost all recovery will work with this ROM. But my opinion is use TWRP recovery, it provide lot of feature also its provide touch support and ext partition support also....
Click to expand...
Click to collapse
3. before flashing should i partition ma sd card or can we do dat after flashing?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 ROM zip file to SD card.
Click to expand...
Click to collapse
its depends upon Ur need man. If Ur going to use internal memory increasing script u must have an 2nd partition in Ur SD card. ext2/3/4 is depend upon the memory script and ROM Ur going to use..
My Suggestion:
Try m2sd script with ext4 partition its work like a charm.. but i read from some post ext4 will damage SD sooner. but perform better. i am always need performance. but i am sure that till now no damage or performance issue occurred in my SD card as well as phone.
before or after partition is ur choice when u need partition u do it. But some ROM need 2nd partition while flashing be careful on that but cm9.1 doesn't need any support from sd card
Click to expand...
Click to collapse
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
Click to expand...
Click to collapse
Both the instruction telling the same thing for u. Here is my guide as same like they stated...
1.copy Ur ROM and GAPPS zip to ur SD-card
2.wipe all the partition data,cache,system,dalvik,etc... except SD-card
3.install ROM zip then install GAPPS zip.
4.Then reboot..
5.wait until u get the home screen.. first boot take some time so be patient
6.After that leave Ur phone for a minute then once again restart Ur phone.
7. final but important click thanks to the Developer and other who help u to install the ROM successfully..
this instruction is for clean installation this will never lead Ur device to problem
Click to expand...
Click to collapse
thanq u all.. but i have some clarification about partiton only.. can anybody give me guide about partitons for CM9.1 . which is best, simple and error free, wheather to go partition then flashing or flashing then partition.. and plz give me guide thru recovery.. and where its pre or post flashing.. pls do needful..
edit :
im unable to figure it out abot s2e scripts, int2sd scripts.. so please tell me actually what are those and how the linked with ext2/3/4 partitioms..
Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
vasanth3008 said:
Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Can u explain what are those sd scripts. What it'll do with the partition. Plz explain me.
Sent from my HTC Explorer A310e using xda app-developers app
tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app
shree alwaz said:
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.
tatiraju.rishabh said:
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.
Click to expand...
Click to collapse
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app
Nobody don't know about ma query. Help me guys.
Sent from my HTC Explorer A310e using xda app-developers app
tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera
help
please temme. today i wanna flash the cm 9.1. plz temme which is best built9 or 11.. what do u people say which is best for daily use, all things should work, games should support like backstab, shadowgun, nfs mostwanted like that.. and it should not drain fast.
n i wanna make partition of ma 8GB class4 sd card before flashing using mini partiton tool. so which is best ext2/3/4 or fat32. n which is best link2sd, mount2sd or anything else. and i no need to create/modify/change the mounts for those apps to use.. cz im not able to figure out what is that mounts acctually. n what is the use of those mount. if anybody explains about those im very much gladful.
n before partition i need to take backup.. it mean i need just copy paste the all the folder which are there in sd card.. its that correct or any method to use.. to get backup.
finally give me exact intraction to flash.. consider i had partiton sd card..
pls help.. ill make flash n wanna eat icecream sandwich today it self.. :crying:
ZaKa123 said:
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera
Click to expand...
Click to collapse
I never had any of those problems.
---------- Post added at 05:56 PM ---------- Previous post was at 05:48 PM ----------
shree alwaz said:
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I never used Mount2SD and never will, cos link2sd works well for me.
Here is what i did:
1. Partition microSD with format ext2. (I used Minitool Partition Wizard for this. A freeware program for Windows)
2. Insert it in the phone, download Link2SD from Play Store.
3. Open Link2SD, it will prompt you to select your partition type. Select ext2.
4. Link2SD will create a mount script and ask you to restart the phone. Do so.
5. After restart, go back to Link2SD, press menu button to open menu.
6. Open "Settings". Make sure "Auto link" is ticked.
7. Exit Link2SD, do a restart.
Thats it! now whenever i install an app, Link2SD sends it to the partition automatically.
Sometimes you may get a phone memory full notification. In that case power off your phone and on it again.
EDIT: all this was done with CM9.1 previously installed.
So what are steps to install cm9.1.
Is it necessary to clear dalvik cache.
Sent from my HTC Explorer A310e using xda app-developers app
Hi I already partitioned my SD to 256mb ext and now I want to change it to 512 so do I use cwm just like first time or what??
Sent from my LG-P500 using xda premium
yes but you will loose all data on SD, I do not know any other way to change and work, there are some apps that are doing this but I am not sure that really works
Did you try it yourself?
I tried some app from store but it did nothing, just in app confirmed and after reboot came back as ware before doing anything
so the best way is trough recovery
some people says that swap should be 0, but I do not really know, mine isn't 0, it is a virtual memory and prevents some apps to be shutdown by low memory killer and maybe improves a little multitasking, I am using ics rom and eats a hell of memory so I am dreaming that not 0 swap it helps a little
I mean repartitioning through recovery
yes, repartition it trough recovery, and yes I did repartition trough cwm recovery for few times with different sizes
Thx
Sent from my LG-P500 using xda premium
Hello everyone,
I have a serious problem here. Before factory reset everything was just fine (except that my phone won't connect to my google account, but i already fixed that) Now after factory reset i can't move some apps/games to my sd card! It's annoying because i have just 160MB internal storage, and now its just less than 50MB free. I heard about all those app2sd apps and so on, but they say that it's can't be movable to sd card, when i was able to do so before the factory reset. And this is a little bit tricky because before factory reset i had this option in my settings->application setting menu, a "preferred install location" and when i pressed that it opened a menu with 3 options:
1.Removable SD card
2.Let the system decide
3.Internal memory.
When i selected external SD card it allowed me to move almost every app (except updates to the pre-installed apps like maps, youtube, facebook etc.) But now there is no option "preferred install location"... So the question is: what i should do, to make this option available again?
My phone is Huawei U8650 sonic with stock-fresh android 2.3.5
I was googling for this problem for 2 days and no answer. I also posted this problem on 2 other forums but nobody knows the answer Please can somebody here help me? I would really appreciate that.
English is not my native language - sorry for mistakes and have a good day!
You could try the app - Link2SD - this app can move almost everything because it replaces the original app with a link.
Apart from that, have u tried to boot into recovery and run repair permissions and cleanded dalvik cache?
Hope I could help.
Feuersprotte said:
You could try the app - Link2SD - this app can move almost everything because it replaces the original app with a link.
Apart from that, have u tried to boot into recovery and run repair permissions and cleanded dalvik cache?
Hope I could help.
Click to expand...
Click to collapse
Really, Im not advanced enough in android to understand what you mean, but i think I'll try to do what you said, and i will reply if it worked or not. Oh yeah does this method need root?
EDIT: so i entered the recovery menu and all I got is;
Reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
wipe misc partition
touchscreen firmware update
I wiped the misc and cache partition, gonna try now.
EDIT 2: no luck, wiping cache and misc didn't helped...
Link2SD is an app you can dowload from the play store - yes I think it needs root - but it is simple as simple to use like any app 2 sd - just give it a try :fingers-crossed:
S2E is good one :thumbup:
Sent from my GT-S5570 using xda premium
You can use apps2sd or android assistant or do yourself
1) goto settings
2) application
3) manage
4) select app
5) click on move to SD card.
That's it.
Sent from my MTS-SP101 using xda premium
bump
But how to move whatsapp to sd card? I mean can you use root explorer?
Sent from my ST15i using Tapatalk 2 Beta-5
Root your device, partition your SD card and then use s2e!
Press the thanks button
Sent from my Nexus⁴
how to move....
vishgupta92 said:
You can use apps2sd or android assistant or do yourself
1) goto settings
2) application
3) manage
4) select app
5) click on move to SD card.
That's it.
Sent from my MTS-SP101 using xda premium
Click to expand...
Click to collapse
the thru.....
Okay, I didn't wanted to do this but i did. I downloaded SDK tools and with these tools and cmd i changed the install location. more info on google.
link2sd it's easy to me.
it's can move user app to sdcard
jusy click move to sd card
What about using titanium backup?
Sent from my ST15i using Tapatalk 2
I have a SCH-R530U US Cellular GS3 running on JB 4.2.2 with AOKP's mr1 build 5.
Kernel: 3.0.67-aokp-00038-g5a02406
I'm bored of this ROM and want to try Liquid Smooth for the features and hopeful battery life extension. I have been trying to get my phone back to stock EVERYTHING every couple weeks for the last few months now, and have not found any stock rom/kernel files that do anything other then brick my device into a hard boot loop. I have a NANDROID backup, so all is not lost, but I'm just so sick of not being able to find ONE file that will give me stock kernel and stock ROM so I can try a new ROM with new features and speed. I would flash LS over the AOKP build, I just haven't found any info on whether or not the ROM is compatible with my kernel, or if that's even an factor and Iv freaked out too many times over thinking my phone was F$*!ed to be that ballsy in trying something without having exact instructions or some sort of literature/video. So Id rather be safe then sorry and start completely fresh.
Also to get rid of all the non-sense i have on my phone from flashing tons of files to get rid of AOKP, and not knowing how to delete them.
The other issue. My SD card isn't recognized by anything. I cant move apps to my SD card with any app out there, the file is emulated and what i think happened was somehow, I ended up with two SD card files, and they have mixed files in them. So being as newb as I am, idk what files i need to keep in order for proper functioning of my phone and which I can delete, so i can move apps to the SD card and pictures and all that stuff to free up space on my phone. Im more then willing to delete everything on the card, but that wont fix my unorganized internal file clusterf$!*#.
Iv seriously being looking for months, downloaded ADB toolkit to try and get stock back that way, but just another boot loop.
TL;DR
1. Need stock ROM/kernel files for my version that will actually work and not bootloop me.
2. Can any ROM be flashed over any kernel, or are there restrictions with specific ones?
3. How can I fix my SD card problem (not recognizable by any App2SD app; literally none -says my SD card is emulated), with messed up internal files?
PLEASE HELP!!!!
Through your recovery do a full wipe (system, data, cache, dalvik) Sounds like you want to wipe your internsl sd too? Depending on where you keep your info you can wipe your internal SD but it's not necessary.
When you flash a ROM it will come with it's own kernel so you don't have to worry if a ROM is compatible with your kernel. Just make sure you flash a ROM that is compatible with US Cellular.
Sent from my SCH-I535 using xda app-developers app
Thank you for your reply, honestly.
I vaguely remember doing a full wipe (system, cache, delvik, and data) and it not fixing the issue. But, I will try again. I'm more concerned about my SD card issue and all the messed up files. Will wiping all this fix that? Using ES explorer, I have about six /0 files... Idk if you know much about that, but from what I've learned, within that ONE /0 file, there should be storage for my SD card (data/media) and of course, there's nothing there. So, do you think or do you know that doing a full system wipe will remedy the problems? No tone intended, not trying to be a jerk, simple curious for the future.
Just format the SD card. Wipe everything off if your comfortable with losing the info. You can save important stuff top your CPU if necessary.
Sent from my SCH-I535 using xda app-developers app
Won't formatting the SD card just erase everything anyway? This would fix my "corrupt" file issue though, correct? The multiple files and unoraginzation?
Sent from my SCH-R530U using xda app-developers app orginized
Yes formatting it will completely wipe it.
Sent from my SCH-I535 using xda app-developers app
And that's something I can do through my recovery, yes?
Sent from my SCH-R530U using xda app-developers app
I'm using TWRP and it can be done though recovery.. wipe > advanced > check sd card
Just backup anything you want to save
Sent from my SCH-I535 using xda app-developers app
Will responded with results later tonight. This stuff always scares me... Gatta risk it for the biscuit though.
Sent from my SCH-R530U using xda app-developers app