[Q] HTC Polaris [Touch Screen not working] - Touch Cruise General

Hello.
The touch fuction of screen of my HTC stopped working from nothing but the display works and be operable by keys. A simple change of screen will solve or the problem may come from the board?
Best Regard
Sheppard

Sheppard06 said:
Hello.
The touch fuction of screen of my HTC stopped working from nothing but the display works and be operable by keys. A simple change of screen will solve or the problem may come from the board?
Best Regard
Sheppard
Click to expand...
Click to collapse
install the calibration screen to fix it

Working Thanks a lot u safed my phone )))

Hi.
It happened almost the same to my Polaris; for no apparent reason the touchscreen functionality stopped. After several attempts (removing battery and SIM card - waiting for any eventual static to dissipate; soft resets, trying to find any spot on the screen to reactivate it) I decided (i see now it was a bad move) to do a hard reset.
Now, every time i reboot, i get stuck on the "Screen Calibration" - meaning there is no way from me to apply the .cab suggested by Hakim Rahman.
Please, if you have any clue on how to solve this i really appreciate the help.
If any solution goes by using a new ROM or even installing Android it doesn't matter. However I don't know if it's possible to connect and sync the device with Windows or Linux and install the needed files, since I could only get up to the calibration screen.
Under Linux, after connecting the device I get:
$ lsusb
Bus 003 Device 019: ID 0bb4:0b0d High Tech Computer Corp.
---
Specs:
POLA100
SPL-3.13.0000
CPLD-2
Processor: MSM7200-400MHZ
Rom Vers.: 3.13.410.0 PTG
Rom date: 08 24 08
Radio Vers.: 1.59.42.15
Protocol Vers.: 25.85.30.07H
Windows Mobile 6.1 Professional
SE CE 5.2.19965 (Compiled 19965.1.2.3)
Thanks.

Related

HP Ipaq h6315 Will not go into the OS - Freezes on bootup!

Hey guys!
While working on my PPC this weekend, I noticed that the system froze while just trying to open NYDITOT Virtual Display.
I tried doing a soft reset and after doing so the system freezes at the "Welcome to T-Mobile" bootup screen and it does not go into the OS (windows Mobile 2003 "Non-SE")
I tried pushing the soft reset button with the device OFF, without the battery, without the sim card, and nothing seems to work.
I cant even re-load the original ROM as Active Synch doesnt see the device due that I dont get into the OS.
Now luckely for me, T-mobile advised that i only had a 3 month warranty with them, which of course "expired" so i was hoping someone could suggest something that might help me resolve this problem.
Any help will be greatly appriciated.
Will V.

please help

my PDA2k digitizer broken, I got over this issue by installing cursor program the point is that I already installed the new WM version but after the installation the first question was to tab the screen to start the alignment, so is their any solution for solving this problem (using buttons in a systematic way )or give any suggestions to get over this problem
Can you connect to activesync and then use remote control software to emulate align screen setup?
Please change the title of your post to something useful. "Please help" is not helpful.
V
Can you connect to activesync and then use remote control software to emulate align screen setup?
where i can get this SW from? can you help?
Thanx a lot for your consideration
Various places, but I think an easy option is the Remote Control app by Microsoft.
It's old but it works.
http://www.microsoft.com/downloads/...27-9172-4BF2-A4AF-DFA4FC6E8BA1&displaylang=en
V
as per your advice i already instaleed the SITO Remote controller but the problem that to finalize the installation process i have to complete the installation through the phone but i cant , i tried even to use buttons blindly but it seems even that the buttons is not yet installed so i cant even use them but the phone is working i'm receiving calls but the problem that i cant see any thing but the alignement screen, is their any help?
forgot to tell you that i'm using WM 2005 -1.12-1337.42-5.04.06

Big problem IN HTC Touch

Hello all
I have recently bought HTC touch ...
Is it good PDA ? can I install Fm radio ( listen with out connecting to internet)
what about gps ...can I update my radio rom to use it and to make it built in
----------------
my current problem
I have tried to unlock rom (by using ELF_USPL-v1)
in final step (that screen has got blank (white) screen) and when progressbar in my pocket pc come to 100% it restarted automatic and I have seen this messege while locking (attached)
some time become 2% in progressbar and restart automaticly
then I connect it with computer and I have stack with my computer when I run Microsoft ActiveSync last version..so I ended it and all steps ok
But finally...
I tried to update with same rom I have failed
and see this messege again
I tried also this rom
\Touch_1.11.707.1B_4mbPagepool_BigStorage that gives me 15 mb extra
same problem
I tried Cert_SPCS.cab & EnableRapi.cab Unlockers in my ppc and still same problem I cannot update the rom
PLLLLLLLLLLLLLLLLLLLLLLEEEEEEEEEEEEEEEEEEEEEEEEEEEAAAAAAAAAAAAAAAAAAAAAASSSSSSSSSSSSSSSSSE
HELP ME !!!
The only way that I know of to get music on your Touch is to load up an expansion memory card or to stream tunes from the net over cellular.
As far as GPS goes, I don't believe the Touch has this feature built in, so you may have to go with a bluetooth GPS for the time being.
I'm not familiar with the upgrade procedures for ROM flashing on the Touch, however I imagine that you first need to obtain an Activesync connection first, then begin flashing. You may want to check up on the wiki and read any step by step instructions that may be there on flashing your phone.
Good luck and cheers!
Lance a lot

[Q] Help with Cect T5388i dual SIM (HTC Touch Diamond 2 clone)

I have a Cect T5388i dual sim, clone of the HTC Touch Diamond 2.
After installing a keypad with T9, the phone re-started, but got frozen on the start-up welcome screen: Touch Diamond 2. Windows does not start anymore, and I can't connect it to my PC either. I tried to hard reset, and got this message: "Step 3 error while updating: File operate: File does not exist" (without SD card inserted, the message is slightly different because it doesn't find the card).
I guess the only way to resume the phone is to flash the right ROM through the SD card, but I can't find one for this exact phone. I've found it for the T5388+, but the processor, the ROM and RAM, and the display resolution are different from the T5388i.
These are the info I know about this phone:
Model: Touch Diamond 2 T5388i
Dual SIM, WIFI, GPS, 2 cameras
Processor: Marvell PXA310 - 806Mhz (shown, not sure if real)
Display Resolution: WQVGA 400x240
ROM/RAM Size: 512MB/256 (shown 288) MB (also not sure if real)
G-Sensor: Yes
Zoom Bar Functional: ? (didn't look like working)
FM Radio: Yes
The OS was Windows Mobile 6.5 (shown), build CE 5.2?... (don't remember the rest)
Please help with suggestions and hopefully with a working ROM for this phone, English or Italian.
I got the same problem What should I do? please help!
I've got the same problem...
Anyone help please...
I fixed it with the hard reset of the phone. First you have to get the ROM acording to your phone model (in my case was T5389i) may be searching in forums or contact with your dealer, then you have to copy the rom in the SD memory and put it on your phone. After that hold the 2 volume butons (up & down) at the same time and then press the ON button for about 3 seconds. Your screen should display a message asking you if you want to update your phone, you hit the answer button to accept; then follow the instalation and restore your phone.
Be sure to use the same ROM of your phone model, in other case you may not be able to fix it and in some cases brick your phone.
Aditional info can be found here: http://forum.xda-developers.com/wik...T5388i#Dual_SIM_T5388i_ROM_versions_.26_links

Help, Green screen on my Car Stereo - WinCE 6.0

Hi folks.
Firstly, please excuse me if this is not the correct forum for my query.
I recently purchased a used Ford Focus car, and it came with a stereo powered by WinCE 6.0. From what information i could gather, it seems to be a Chinese made car stereo. And i don't know who manufactured it.
Unfortunately, when i select SD card from the touch screen, the screen turns a green colour. If i am lucky, sometimes, the SD card plays my music. However, most of the time the screen is a green colour when i select the SD card. Everything else works fine, Radio, GPS, Bluetooth.
I have used three different SD cards and different music files, still the green screen appears when i select the SD card.
Anyway, I 'restored' the stereo through the settings, but this had no affect whatsoever. Also, i was prompted for a pin number to do a factory reset. The pin number i do not know. And i used a needle to reset through the pin hole.
Does anyone know where i can get firmware and how i can install it please?
Specification:
MCU/DVD/BT Ver: A4-USB131128 / 1014 / JQ_LM_505_2012_09_28_V01
System: Windows CE 6.0
App Ver: 20131205
Boot Ver: 014b0000
Flash size: 128M
OS Ver: A4-CZGB0-130823-01-CE6-V2.2.6
UUID: C7D0600C-DE3A-4113-5438-583042445F30
Any help would be greatly appreciated.
Thanks in advance.
have you tried using a different card? if it still happens, i am afraid you may have to change a new headunit.
as these chinese "OEM"s are of no branding, there is little to no support for any firmware issues.
Bernielee said:
have you tried using a different card? if it still happens, i am afraid you may have to change a new headunit.
as these chinese "OEM"s are of no branding, there is little to no support for any firmware issues.
Click to expand...
Click to collapse
Don't think i can afford a new Stereo at the moment.
Besides, everything else on it - GPS/BT/Radio/Camera works perfectly, it is just the SD not playing music (50% of the time).
Do you know what the Factory pin/password/code may be??
Thanks for your reply though!
Try 3721
Problemm
Hi guys ...
I had a problem with my audio car. i Have a chinese 2 din radio and last week i had a problem in my car battery, and after plug in and plug out the key, the radio appeared the message " interface application error" and the infertace was unformated...
I can acess to the settings to do a factoryu reset.. The system is wince6.0
Is it possible download the firmware and update the system?
if yes, where can i get the download? i allready try to search..
Please help me

Categories

Resources