Related
I got the 2.3.5 Update OTA on my One-click-root Nexus and applied the update, but now I'm stuck on the android/exclamation point screen.
What do I do??
gnuf99 said:
I got the 2.3.5 Update OTA on my One-click-root Nexus and applied the update, but now I'm stuck on the android/exclamation point screen.
What do I do??
Click to expand...
Click to collapse
That's the stock recovery - hold power and hit vol up to get the menu.
I've been doing that, but nothing happens.
I did a battery pull, and it rebooted in 2.3.4
So what am I doing wrong? Do I need to change something before trying the update again?
Hold power and slide from volume down to volume up. But that wont do u any good you need to flash a custom recovery and reflash super user.
Sent from my Nexus S 4G using Tapatalk
So I goofed something up on my phone?
Is there a way to do this without losing all my app info/game saves?
I was going to run a TItanium backup.
And sorry, I'm a total noob with this.
ROM Manager, would I flash an older ROM or the ClockworkMod Recovery?
At that point could i just install the update and re root with Shabby Penguin's one click and then get all my app data back from Titanium backup?
gnuf99 said:
So I goofed something up on my phone?
Is there a way to do this without losing all my app info/game saves?
I was going to run a TItanium backup.
And sorry, I'm a total noob with this.
ROM Manager, would I flash an older ROM or the ClockworkMod Recovery?
At that point could i just install the update and re root with Shabby Penguin's one click and then get all my app data back from Titanium backup?
Click to expand...
Click to collapse
Nothing is goofed up if you rebooted into 2.3.4.
The update did not apply. Did you receive the OTA or download it manually?
If you are unlocked just flash CWM via fastboot and apply it from there.
If you are locked then you can go back into the stock recovery, hold power down and hit vol up (in that order) to get the menu and apply the update. You may want to ensure it is in the root of the sdcard and named update.zip.
The OTA does not wipe nor is a wipe necessary, so you shouldn't be losing any data/apps.
I got the update OTA, but not it's not asking me if I want to apply it.
I'm sorry I'm such a noob here, but step wise.
If I boot up with Vol UP, I can then go to Recovery and get to ClockWork Recovery.
From there do I just hit update from SD card?
gnuf99 said:
I got the update OTA, but not it's not asking me if I want to apply it.
I'm sorry I'm such a noob here, but step wise.
If I boot up with Vol UP, I can then go to Recovery and get to ClockWork Recovery.
From there do I just hit update from SD card?
Click to expand...
Click to collapse
Yeah, choose apply update. Choose your zip from the SD card and apply.
It will go through a series of asserts and then apply if it passes. If you've modified any of the checked system files, boot image or kernel it's likely going to fail.
Well, I didn't alter any of them on purpose
I used Shabby Penguin's one click root so I could use Titanium Backup only. (Although now I'll probably add tethering to the list) So I don't think I changed any kernel files.
It's saying it can't find the file. Whatever downloaded must have gotten deleted somehow. I may just download the update and do it myself like everyone else.
Just to clarify. I place the update.zip in the root and select apply update on the ClockWorkMod Recovery, and that's it?
I was waiting to just get the update OTA organically hoping it would avoid these problems, lol.
gnuf99 said:
Well, I didn't alter any of them on purpose
I used Shabby Penguin's one click root so I could use Titanium Backup only. (Although now I'll probably add tethering to the list) So I don't think I changed any kernel files.
It's saying it can't find the file. Whatever downloaded must have gotten deleted somehow. I may just download the update and do it myself like everyone else.
Just to clarify. I place the update.zip in the root and select apply update on the ClockWorkMod Recovery, and that's it?
I was waiting to just get the update OTA organically hoping it would avoid these problems, lol.
Click to expand...
Click to collapse
In CWM use the choose zip file from SD card option, then you can pick the file regardless of it's name.
That's it - if you are stock (other than rooting) it should apply without any issues.
You may need to reflash CWM and delete /etc/install-recovery.sh to keep CWM installed. I haven't looked at the update itself to see if it is installing the script to reflash the stock recovery.
I had this problem too. I rebooted and its back to 2.3.4. I will attempt to go to 2.3.5 today once I have more time and post my findings here. If anyone has any success please keep updating this thread.
It looks like I have to reflash CWM in order to restore Super User.
My bootloader is still unlocked, but it won't let me run/install CWM. How do I do this?
Jagar, I did finally figure this out after reading through the code in the rooting .bat that Shabby Penguin put together.
basically his file has the Clockwork Recovery image that you need.
Boot up in bootloader.
then type
fastboot flash recovery ______.img whatever image you have.
Then select RECOVERY on the bootloader menu and now you can install the superuser.zip file to re-root.
you might wanna just run the new one click again, make sure its version 2.0.. it will do teh dirty work for ya
Seriously Shabby, big props to you for automating that process. I learned much more from your code than reading through all those other posts
@gnuf99 although you succeeded in getting root , please do read the guides abt adb and fastboot. This will be always handy for you, indifferent of the device you'll use later.
Sent from my Transformer TF101 using Tapatalk
this forum is here to help people and spread knowledge, not so we can talk down to those less experienced then us. everyone starts somewhere...
removed. unnecessary comment by me .
shabbypenguin said:
you might wanna just run the new one click again, make sure its version 2.0.. it will do teh dirty work for ya
Click to expand...
Click to collapse
*REMOVED* Looking on another thread.
So, you've got the latest OTA (1.55.531.3) and the HTC unlocker tool won't work? Tired of waiting for HTC to issue a fix/resume the OTA? You no longer have to wait in agony.
These are the steps I took to unlock the latest OTA. They worked for me, they may not work for you. Anything you do to your phone is not my responsibility.
That said..
Backup what you can. Your phone is going to be wiped.
Make sure your battery is charged up.
Download the full 1.55.531.3 image. This contains the confirmation splash screen which wasn't loaded on older MT4GSes, and is the reason the unlocker tool won't work on our devices. You can get the full image (it's over 400MB) here:
http://www.filefactory.com/file/c0f....00_11.16.3504.20_2_release_227956_signed.zip
Click to expand...
Click to collapse
Download the CWM recovery image:
http://download.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.7-doubleshot.img
Click to expand...
Click to collapse
Rename the full image downloaded in the first step to PG59IMG.zip and place it on the root of the SD card in your phone.
Shut the phone down, remove the battery, and boot back up while holding both the volume down and power buttons down.
The phone will check the PG59IMG.zip file and will ask you if you want to restore that image. You want to do this, but keep in mind this is going to wipe your phone. All data will be lost.
The phone will restore the image. This takes a few minutes. When it's done, you'll be prompted to reboot, and you'll boot into a completely stock MT4GS experience.
Use the unlock tool on htcdev.com to generate your unlock code. The splash screen is now on your phone, and you should be able to unlock (I had no issues).
I rebooted at this point, just to be safe, and set up my phone.
Copy the recovery image you downloaded earlier into the directory where you're running fastboot. Rename it to recovery.img
Shut down, boot into the bootloader/fastboot, and enter the following command to flash CWM recovery:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
At this point, you should probably reboot the bootloader before entering CWM. Once you've done that, you can go ahead and flash superuser/roms/etc.
Here's a pointer to restoring your phone to stock, courtesy of blue:
http://forum.xda-developers.com/showpost.php?p=17424340&postcount=24
So if we've gotten this far, is S-OFF going to gain us anything more? Are we still locked out of certain areas? The tool worked for me, but I'm using the rest of your guide to flash CWM. Thanks for writing it!
xzuhto said:
So if we've gotten this far, is S-OFF going to gain us anything more? Are we still locked out of certain areas? The tool worked for me, but I'm using the rest of your guide to flash CWM. Thanks for writing it!
Click to expand...
Click to collapse
In my opinion, S-Off won't really gain you much more. You'll have to flash kernels separately when flashing ROMs, but that doesn't seem to be a big deal (IMO).
You could probably flash back to the original release software if you wanted, and gain S-OFF with revolutionary, but I haven't tried that and have no idea if it will work.
The only thing you can't do with Unlocked/S-ON is flash radios.
Well in that case this phone is right where I want it. I've never messed with kernels on any phone I've had previously nor have I messed with flashing radios. I just got done completing the steps and I'm now root along with CWM. Great work throwing this up for everyone.
jonnycat26 said:
So, you've got the latest OTA (1.55.531.3) and the HTC unlocker tool won't work? Tired of waiting for HTC to issue a fix/resume the OTA? You no longer have to wait in agony.
These are the steps I took to unlock the latest OTA. They worked for me, they may not work for you. Anything you do to your phone is not my responsibility.
That said..
Backup what you can. Your phone is going to be wiped.
Make sure your battery is charged up.
Download the full 1.55.531.3 image. This contains the confirmation splash screen which wasn't loaded on older MT4GSes, and is the reason the unlocker tool won't work on our devices. You can get the full image (it's over 400MB) here:
Download the CWM recovery image:
Rename the full image downloaded in the first step to PG59IMG.zip and place it on the root of the SD card in your phone.
Shut the phone down, remove the battery, and boot back up while holding both the volume down and power buttons down.
The phone will check the PG59IMG.zip file and will ask you if you want to restore that image. You want to do this, but keep in mind this is going to wipe your phone. All data will be lost.
The phone will restore the image. This takes a few minutes. When it's done, you'll be prompted to reboot, and you'll boot into a completely stock MT4GS experience.
Use the unlock tool on htcdev.com to generate your unlock code. The splash screen is now on your phone, and you should be able to unlock (I had no issues).
I rebooted at this point, just to be safe, and set up my phone.
Copy the recovery image you downloaded earlier into the directory where you're running fastboot. Rename it to recovery.img
Shut down, boot into the bootloader/fastboot, and enter the following command to flash CWM recovery:
At this point, you should probably reboot the bootloader before entering CWM. Once you've done that, you can go ahead and flash superuser/roms/etc.
Click to expand...
Click to collapse
the doubleshot img downloads painfully slow, do you have another link?
edit: also i think you missed somthing here"
[*]Shut down, boot into the bootloader/fastboot, and enter the following command to flash CWM recovery:
"
ac3theone said:
the doubleshot img downloads painfully slow, do you have another link?
...
Click to expand...
Click to collapse
Well, where football is hosting the new PG59IMG.zip file is the only place we have it - i just found it yesterday and we haven't had time to up it anywhere else yet.
We are working on making mirrors for it now - give us some time to get set up with our new data.
---------- Post added at 01:38 AM ---------- Previous post was at 01:33 AM ----------
jonnycat26 said:
In my opinion, S-Off won't really gain you much more. You'll have to flash kernels separately when flashing ROMs, but that doesn't seem to be a big deal (IMO).
You could probably flash back to the original release software if you wanted, and gain S-OFF with revolutionary, but I haven't tried that and have no idea if it will work.
The only thing you can't do with Unlocked/S-ON is flash radios.
Click to expand...
Click to collapse
No, you can't go back to retail factory if you are S-ON. This new PG59IMG.zip I found is the furthest back you can go completely.
With S-ON you cannot replace hboot, or radio - those two are a big deal - i'm still working on an S-OFF solution for S-ON people with hboot 1.45.0013.
With S-OFF I can swap out hboots on a whim, and thrice43 even flashed a Sensation hboot to his doubleshot and it worked out for him - but with S-ON you cannot do this. (and if you could, you would brick)
S-OFF is very much preferable to S-ON UNLOCKED.
I've also had problems flashing OTA updates through stock recovery manually when S-ON where I had no trouble doing so while S-OFF.
There are still a lot of things you can't do with your device while S-ON.
EDIT:
also, all the PG59IMG.zip files I made for people to flash recoveries, hboots, and so on in the dev reference sticky cannot be used by anyone S-ON because they fail the signature checks. My custom PG59IMG.zip files don't have an HTC signature which you must have for an S-ON device to load the PG59IMG.zip file.
...so there are a number of reasons why S-OFF is something to get.
xzuhto said:
Well in that case this phone is right where I want it. I've never messed with kernels on any phone I've had previously nor have I messed with flashing radios. I just got done completing the steps and I'm now root along with CWM. Great work throwing this up for everyone.
Click to expand...
Click to collapse
You must flash a kernel if you want to flash an ICS ROM or any GB ROM with a modified kernel.
Also:
Here's a faster mirror, hopefully: http://www.4shared.com/zip/vVHQuid0/PG59IMG_Doubleshot_TMOUS_15553.html
I see the downsides to s-on but I'm happy to have root and cwm. I will however be excited to get this thing fully unlocked. I won't be messing with custom roms till then. lol
Sent from my myTouch_4G_Slide using Tapatalk
I managed to host it on my Dropbox
Edit:
Oh sorry Lime, I didn't see that you were already hosting it...
this might deserve a sticky?
If anyone is going to mirror it please keep the original filename - we have more then one PG59IMG.zip file with an HTC signature (retail launch and this one).
If they are not named including the software version and radio then people may be confused on what they are getting - thanks guys!
it worked, now to get su. thanks for the guide
delete post
jonnycat26 said:
So, you've got the latest OTA (1.55.531.3) and the HTC unlocker tool won't work? Tired of waiting for HTC to issue a fix/resume the OTA? You no longer have to wait in agony.
These are the steps I took to unlock the latest OTA. They worked for me, they may not work for you. Anything you do to your phone is not my responsibility.
That said..
Backup what you can. Your phone is going to be wiped.
Make sure your battery is charged up.
Download the full 1.55.531.3 image. This contains the confirmation splash screen which wasn't loaded on older MT4GSes, and is the reason the unlocker tool won't work on our devices. You can get the full image (it's over 400MB) here:
Download the CWM recovery image:
Rename the full image downloaded in the first step to PG59IMG.zip and place it on the root of the SD card in your phone.
Shut the phone down, remove the battery, and boot back up while holding both the volume down and power buttons down.
The phone will check the PG59IMG.zip file and will ask you if you want to restore that image. You want to do this, but keep in mind this is going to wipe your phone. All data will be lost.
The phone will restore the image. This takes a few minutes. When it's done, you'll be prompted to reboot, and you'll boot into a completely stock MT4GS experience.
Use the unlock tool on htcdev.com to generate your unlock code. The splash screen is now on your phone, and you should be able to unlock (I had no issues).
I rebooted at this point, just to be safe, and set up my phone.
Copy the recovery image you downloaded earlier into the directory where you're running fastboot. Rename it to recovery.img
Shut down, boot into the bootloader/fastboot, and enter the following command to flash CWM recovery:
At this point, you should probably reboot the bootloader before entering CWM. Once you've done that, you can go ahead and flash superuser/roms/etc.
Click to expand...
Click to collapse
Copy the recovery image you downloaded earlier into the directory where you're running fastboot. Rename it to recovery.img
Shut down, boot into the bootloader/fastboot, and enter the following command to flash CWM recovery:
fastboot flash recovery recovery.img
Cant do this last few steps.Don't understand what to do as yet
Scondrel said:
Copy the recovery image you downloaded earlier into the directory where you're running fastboot. Rename it to recovery.img
Shut down, boot into the bootloader/fastboot, and enter the following command to flash CWM recovery:
fastboot flash recovery recovery.img
Cant do this last few steps.Don't understand what to do as yet
Click to expand...
Click to collapse
You need to transfer the recovery image to the directory with your fastboot.exe file.
You would then need to rename it to recovery.img
Then you boot your phone into fastboot mode, and plug it into the computer.
Open a command prompt, and navigate to the directory with fastboot.exe and run the command:
fastboot flash recovery recovery.img
Thanks got it now.Appreciate the help
---------- Post added at 01:23 AM ---------- Previous post was at 12:53 AM ----------
Scondrel said:
Thanks got it now.Appreciate the help
Click to expand...
Click to collapse
Didn't work for me,I all the way to final step, but once i enter recovery for CWM,and try to flash the superuser file or anything else, it just shows the icon and nothing else happens.Once i click the power button it goes back to the CWM Home screen.Any advice on this guys ?
Scondrel said:
Thanks got it now.Appreciate the help
---------- Post added at 01:23 AM ---------- Previous post was at 12:53 AM ----------
Didn't work for me,I all the way to final step, but once i enter recovery for CWM,and try to flash the superuser file or anything else, it just shows the icon and nothing else happens.Once i click the power button it goes back to the CWM Home screen.Any advice on this guys ?
Click to expand...
Click to collapse
You are using the trackpad to "select" within CWM, not the power button, right?
jonnycat26 said:
You are using the trackpad to "select" within CWM, not the power button, right?
Click to expand...
Click to collapse
Thanks it was 'nt that. There wasn't enough space on the memory card and I didn't have USB debugging on.Got it solved now .Thanks for the speedy responses.Truly appreciated .Feels so good to be a part of this community.
jonnycat26 said:
So, you've got the latest OTA (1.55.531.3) and the HTC unlocker tool won't work? Tired of waiting for HTC to issue a fix/resume the OTA? You no longer have to wait in agony.
These are the steps I took to unlock the latest OTA. They worked for me, they may not work for you. Anything you do to your phone is not my responsibility.
That said..
Backup what you can. Your phone is going to be wiped.
Make sure your battery is charged up.
Download the full 1.55.531.3 image. This contains the confirmation splash screen which wasn't loaded on older MT4GSes, and is the reason the unlocker tool won't work on our devices. You can get the full image (it's over 400MB) here:
Download the CWM recovery image:
Rename the full image downloaded in the first step to PG59IMG.zip and place it on the root of the SD card in your phone.
Shut the phone down, remove the battery, and boot back up while holding both the volume down and power buttons down.
The phone will check the PG59IMG.zip file and will ask you if you want to restore that image. You want to do this, but keep in mind this is going to wipe your phone. All data will be lost.
The phone will restore the image. This takes a few minutes. When it's done, you'll be prompted to reboot, and you'll boot into a completely stock MT4GS experience.
Use the unlock tool on htcdev.com to generate your unlock code. The splash screen is now on your phone, and you should be able to unlock (I had no issues).
I rebooted at this point, just to be safe, and set up my phone.
Copy the recovery image you downloaded earlier into the directory where you're running fastboot. Rename it to recovery.img
Shut down, boot into the bootloader/fastboot, and enter the following command to flash CWM recovery:
At this point, you should probably reboot the bootloader before entering CWM. Once you've done that, you can go ahead and flash superuser/roms/etc.
Click to expand...
Click to collapse
These instructions worked perfectly! Can not believe it worked. This should be stickied! Thank you.
tbalden said:
this might deserve a sticky?
Click to expand...
Click to collapse
revo420 said:
This should be stickied!
Click to expand...
Click to collapse
Eh, why not. Done .
Hi,
I'm in the situation of having a working tablet, but the dodgy version of CWM. The original thread has been deleted and I remember there was adb command at the end to stop the original update.zip from flashing the factory recovery, but not what it was so I can reverse it !
So if anyone can help me out, that would be great, so I can avoid a bricked device !
jpearn said:
Hi,
I'm in the situation of having a working tablet, but the dodgy version of CWM. The original thread has been deleted and I remember there was adb command at the end to stop the original update.zip from flashing the factory recovery, but not what it was so I can reverse it !
So if anyone can help me out, that would be great, so I can avoid a bricked device !
Click to expand...
Click to collapse
go finding a original recovery dump,and flashing it in fastbootmode.
Has anybody been able to find a stock recovery for the A700? JP, I also flashed this broken CWM, thankfully I haven't used it but I want to put the stock one back on to avoid any issues.
1
californiarailroader said:
Has anybody been able to find a stock recovery for the A700? JP, I also flashed this broken CWM, thankfully I haven't used it but I want to put the stock one back on to avoid any issues.
Click to expand...
Click to collapse
reflashing the official update.zip
but,delete the first and the third comands in the updating list,this could avoid wiping/formating action to avoid damage to the /data partition.
lsnc said:
reflashing the official update.zip
but,delete the first and the third comands in the updating list,this could avoid wiping/formating action to avoid damage to the /data partition.
Click to expand...
Click to collapse
Thanks! However, the US Version doesn't have an update for it, at least not yet, and I haven't been able to find a stock US A700 ROM.
So we would need to rename the install-recovery.old back to install-recovery.sh in /system as this was disabled in CWM ??
So has anyone managed to successfully put on the stock recovery ?? !!
jpearn said:
So has anyone managed to successfully put on the stock recovery ?? !!
Click to expand...
Click to collapse
Take a little advice folks. If you don't know what you're doing, and your tab is running fine, don't be messing with anything. Just leave it alone til a better method comes.
My guess, if you rename your recovery.sh, is that when you boot, you will either get;
A. a "loading recovery kernel" message that just stays there
or
B. an "invalid recovery image", or something similar.
MD
Moscow Desire said:
Take a little advice folks. If you don't know what you're doing, and your tab is running fine, don't be messing with anything. Just leave it alone til a better method comes.
My guess, if you rename your recovery.sh, is that when you boot, you will either get;
A. a "loading recovery kernel" message that just stays there
or
B. an "invalid recovery image", or something similar.
MD
Click to expand...
Click to collapse
That's what I'm doing, I'm just leaving the CWM on there until somebody comes up with a fixed version.
californiarailroader said:
That's what I'm doing, I'm just leaving the CWM on there until somebody comes up with a fixed version.
Click to expand...
Click to collapse
Sounds like a plan I'll keep things working for now, thanks !
jpearn said:
Sounds like a plan I'll keep things working for now, thanks !
Click to expand...
Click to collapse
View attachment updater-script.rar
use this attachment to replace the original file,then reflash update.zip via cmw.
'cos i delete the formating commands in the list,u could reflash the official package to restore the official recovery.
lsnc said:
View attachment 1190247
use this attachment to replace the original file,then reflash update.zip via cmw.
'cos i delete the formating commands in the list,u could reflash the official package to restore the official recovery.
Click to expand...
Click to collapse
I don't understand these instructions. What original file is being replaced? What update.zip are you referring to?
EDIT
Well, I tried to swap out the update script that came in the ROM: SDs_Acer_A700_AV043.RV00RC00_AV043.RV07RC04_EMEA_CUS1, with the one provided above and seemed to have made some progress...I put on an external SD card and renamed to update and then flashed it through the CWM recovery and it completed. A random offset was noted and then the SD update completed note. However, when I rebooted the device it stuck at the Acer logo and never went any further.
EDIT
So, it then occurred to me that the flash through CWM was probably only partially successful - maybe the replacement of the recovery worked. So, I took the same ROM I noted above, unmodified, placed on the external SD card, renamed, etc. and flashed it and it worked - I never saw any signs of CWM during this process. I hope this helps others too.
EDIT
Looks like I spoke too soon...the flash never got past a 1/4 of the progress bar. Looks like I still have a non-functioning device.
lsnc said:
View attachment 1190247
use this attachment to replace the original file,then reflash update.zip via cmw.
'cos i delete the formating commands in the list,u could reflash the official package to restore the official recovery.
Click to expand...
Click to collapse
Hi, I'm a A510 user. I used the CWM to wipe data/factory reset, after that i cant flash any zip, and even cant enter the system. When i turn on the tab, it stuck on 'iconia tab' LOGO, I tried to hard reset, then i got a 'Unrecoverable bootloader error (0x19000008)'
I enter the fastboot and flash the stock recovery back. next i use the recovery to flash update.zip as usual, but every time the flash will stuck in 1/5 of the whole progress bar, I changed it with other rom zip, or even change the SD card, it didn't work anyway!
every time the flash stuck in the same place of the whole progress bar, i guess it is not an accident! After read your solution, I check the script in my zip, then i delete 2 lines about 'format' command. I think this time will be ok! but to my surprise the green turtle fell down when flashing.
I think the idea is great, but it maybe make the script incomplete, so it cant be flash in.:crying:
I tried to update to KitKat officially over the air but I get an error message , I had a custom recovery but flashed back to a version of the stock recovery,thing is I think its the recovery that's the problem,I don't know which version of the moto g its from (tesco,us,Brazil) I'm not sure so I'm on the unlocked UK ROM retail.gb.en.GB bought from phones 4u . am I right in thinking that the recovery is the problem and would anyone have a copy of the recovery I'm looking for??
kieranc88 said:
I tried to update to KitKat officially over the air but I get an error message , I had a custom recovery but flashed back to a version of the stock recovery,thing is I think its the recovery that's the problem,I don't know which version of the moto g its from (tesco,us,Brazil) I'm not sure so I'm on the unlocked UK ROM retail.gb.en.GB bought from phones 4u . am I right in thinking that the recovery is the problem and would anyone have a copy of the recovery I'm looking for??
Click to expand...
Click to collapse
Are you also rooted, if so that's more likely the error.
There should be links in the forums to UK retail images.
scott_doyland said:
Are you also rooted, if so that's more likely the error.
There should be links in the forums to UK retail images.
Click to expand...
Click to collapse
I'm rooted yes but I did the temporary unroot option that's found in super su but I suppose the files are in the system still,the progress bar moves about a third of the way through the update then fails.
kieranc88 said:
I'm rooted yes but I did the temporary unroot option that's found in super su but I suppose the files are in the system still,the progress bar moves about a third of the way through the update then fails.
Click to expand...
Click to collapse
I have read in other threads that the unroot option possibly still leaves some system files different from what they originally were.
If possible can you flash cwm or twrp and backup /system. Then unpack/untar the backup on your PC and look at file
/system/etc/install- recovery.sh
See if it mentions superSU in the comments. This file is altered by superSU and I've heard it may be this file that does not get set back to its default when you unroot.
I can send you original file but you'd have to find a way to copy it to /system - hard if unrooted!! Maybe copy it and then unroot as I *think* this may work. The file seems to just start root daemon on boot so should be able to overwrite while rooted and then unroot.
I'm rooted and my update failed third of way through as well. However I wanted it to so updated while rooted on purpose as I want to stay on 4.3 (updating and letting it fail stops the 'update reminder').
scott_doyland said:
I have read in other threads that the unroot option possibly still leaves some system files different from what they originally were.
If possible can you flash cwm or twrp and backup /system. Then unpack/untar the backup on your PC and look at file
/system/etc/install- recovery.sh
See if it mentions superSU in the comments. This file is altered by superSU and I've heard it may be this file that does not get set back to its default when you unroot.
I can send you original file but you'd have to find a way to copy it to /system - hard if unrooted!! Maybe copy it and then unroot as I *think* this may work. The file seems to just start root daemon on boot so should be able to overwrite while rooted and then unroot.
I'm rooted and my update failed third of way through as well. However I wanted it to so updated while rooted on purpose as I want to stay on 4.3 (updating and letting it fail stops the 'update reminder').
Click to expand...
Click to collapse
Yeah,send it,I'll try copying it,unrooting and then trying the update
kieranc88 said:
Yeah,send it,I'll try copying it,unrooting and then trying the update
Click to expand...
Click to collapse
And will it matter what version of the stick recovery I'm using( if there are different versions)
kieranc88 said:
I tried to update to KitKat officially over the air but I get an error message , I had a custom recovery but flashed back to a version of the stock recovery,thing is I think its the recovery that's the problem,I don't know which version of the moto g its from (tesco,us,Brazil) I'm not sure so I'm on the unlocked UK ROM retail.gb.en.GB bought from phones 4u . am I right in thinking that the recovery is the problem and would anyone have a copy of the recovery I'm looking for??
Click to expand...
Click to collapse
check out this thread: http://forum.xda-developers.com/showthread.php?t=2611544
my posts have links to guides/files that helped me fix the OTA update error, and the thread as a whole should help you out
xTx
tee_pot said:
check out this thread: http://forum.xda-developers.com/showthread.php?t=2611544
my posts have links to guides/files that helped me fix the OTA update error, and the thread as a whole should help you out
xTx
Click to expand...
Click to collapse
OK,well at the moment I'm trying out cm11 unofficial builds,I'll see how they go, I'll try the full unroot option when I restore my cwm backup and reflash stock recovery and see if that works ,as I only tried the temporary unroot option in supersu(which is probably leaving some root files behind so it can reinstall su ) if that don't work I'll flash back to stock and try again.
kieranc88 said:
Yeah,send it,I'll try copying it,unrooting and then trying the update
Click to expand...
Click to collapse
I will send file tomorrow when I'm at my PC.
kieranc88 said:
Yeah,send it,I'll try copying it,unrooting and then trying the update
Click to expand...
Click to collapse
I have attached the file /system/etc/install-recovery.sh file to this post (had to gzip it as couldnt upload when it was just called .sh)
Im not sure what the original persmissions of the file should be on your phone, but if you make it read/write/executable by everyone then should be OK I guess.
As I mentioned it'd be good if you unrooted and did a backup and extracted the file to see the contents (before copying over the file). That would first tell you for sure if the file does revert back to original or if it stays as a 'superSU' file when you unroot.
If its reverted back to original then my theory is wrong anyway so no need to copy over the file.
Re the stock recovery type/version being different from what is expected - I dont know if that makes a difference to the OTA working or not. Its an interesting question though so I may do some googling and find out.
I also have a UK retail stock recovery.img (taken with CWM) (my phone is 16GB from phones4u). So if you want that you can have it. Should rule out the recovery type as a problem.
FYI the install-recovery.sh original file actually flashes a new stock recovery when an OTA is performed. At least if you look in the comments of the file I attached above thats what it says.
Hello, I seem to have soft bricked my tf700.
I flashed a newish pacman nightly in CWM (after wiping data/cache/dalvik cache), which completed with no errors, then I flashed the corresponding GAPPS. But my device became stuck in the pacman boot intro.
So I tried flashing slimkat which led to my device not getting past the first bootup screen (where you can enter recovery if pressing the corresponding buttons).
After this screw-up I stupidly hit the wipe data button on the bootloader. I then tried doing the method of using fastboot to erase system, cache, and all that so I could flash system blob of the newest asus US SKU (that is correct for a US bought tf700 right?). Either this or wiping the data caused me to have a different bootloader as pictured below as I no longer have the android button and it does not ask me to press volume up to access recovery (the only way to access recovery is by hitting the wipe data button in bootloader).
I can still fastboot flash CWM, but trying to flash TWRP does not work as it finishes but going into recovery causes the tablet to just restart. Trying to flash asus stock as above would always give me an error like the one pictured below. Similar errors occur if trying to flash any rom inside CWM via an external sd card.
I do not have access to adb as i believe i dont have usb debugging enabled since the pacman rom or any other rom did not ever start. It just gives me the device not found error even after manually installing the drivers on two different computers.
Cant seem to get these pics to load, but copying the url and pasting it works.
http://imgur.com/AaU0GMt
http://imgur.com/vDTVa4B
You probably flashed the wrong Rom. Try flashing the >right< stock Rom and go from there. Double check everything you flash.
tylerleo said:
You probably flashed the wrong Rom. Try flashing the >right< stock Rom and go from there. Double check everything you flash.
Click to expand...
Click to collapse
Whats the "right" rom here? Talking about the original asus stock rom? I have now tried the the pacman nightly, pacman release, slim kat release, clean rom release, an ICS asus stock rom, and two different versions of the jellybean asus stock rom. These were either done in CWM via internal sd card, external sd card, or done through fastboost flash system blob and flash zip.
gio3505 said:
Whats the "right" rom here? Talking about the original asus stock rom? I have now tried the the pacman nightly, pacman release, slim kat release, clean rom release, an ICS asus stock rom, and two different versions of the jellybean asus stock rom. These were either done in CWM via internal sd card, external sd card, or done through fastboost flash system blob and flash zip.
Click to expand...
Click to collapse
Whatever Rom came on the device,(Good thing to have, da) I'm not familiar with this device.
tylerleo said:
Whatever Rom came on the device,(Good thing to have, da) I'm not familiar with this device.
Click to expand...
Click to collapse
As far as i know, i have installed the stock rom, or atleast multiple versions of it with no success as it gives me an error stating something like staging or system when trying to write it.
gio3505 said:
As far as i know, i have installed the stock rom, or atleast multiple versions of it with no success as it gives me an error stating something like staging or system when trying to write it.
Click to expand...
Click to collapse
Hmm, I'd Download a stock Rom for the device offline, take on the sd card and put it on there real quick and try to flash that, if not, you probably bricked your device. I wouldn't know how to fix it beyond that. Ask the dev that made the Rom were everything that went south and an email to cwm wouldn't hurt either
I am also not sure if I need to have my external sd card formatted a certain way or download a specific CWM to allow flashing the stock rom. Ive spent over 10 hours trying to figure this out, very frustrating.
I have run CWM 6.0.4.6, CWM 6.0.4.7, and older versions to see if I could flash the stock rom with no luck. I have also tried different versions of TWRP but they always hang and reboot my tf700. I get errors ranging from status 6, status 7, cannot mount data, cannot mount staging, and cannot mount system. I am completely lost on what I can do. I have even tried a seperate sdcard to see if maybe the one I was originally using was bad with no luck. GG :/
gio3505 said:
I have run CWM 6.0.4.6, CWM 6.0.4.7, and older versions to see if I could flash the stock rom with no luck. I have also tried different versions of TWRP but they always hang and reboot my tf700. I get errors ranging from status 6, status 7, cannot mount data, cannot mount staging, and cannot mount system. I am completely lost on what I can do. I have even tried a seperate sdcard to see if maybe the one I was originally using was bad with no luck. GG :/
Click to expand...
Click to collapse
You gotta stop flashing stuff and slow down!
During all of this you never posted your bootloader version, so you may have been on the wrong bootloader to begin with - who knows.
When you hit the Wipe Data in the bootloader menu you caused the BL do write a wipe data command to the misc partition, causing the tablet to boot to recovery each time you booted (I'm guessing here) and then interrupting it. Usually, with CWM installed, it eventually sorts it out and executes the wipe data command, but that takes hours! You just have to leave it alone.
Hard to tell where you are now since you flashed all kinds of stuff since then.
Can you still boot into the bootloader and have a fastboot connection?
What's the BL version number?
If you boot, what does it boot into?
The picture links are broken - at least in Tapatalk. Post them again?
berndblb said:
You gotta stop flashing stuff and slow down!
During all of this you never posted your bootloader version, so you may have been on the wrong bootloader to begin with - who knows.
When you hit the Wipe Data in the bootloader menu you caused the BL do write a wipe data command to the misc partition, causing the tablet to boot to recovery each time you booted (I'm guessing here) and then interrupting it. Usually, with CWM installed, it eventually sorts it out and executes the wipe data command, but that takes hours! You just have to leave it alone.
Hard to tell where you are now since you flashed all kinds of stuff since then.
Can you still boot into the bootloader and have a fastboot connection?
What's the BL version number?
If you boot, what does it boot into?
The picture links are broken - at least in Tapatalk. Post them again?
Click to expand...
Click to collapse
Yes, the pictures are broken. You can still copy paste the url though. Couldnt figure out why it wouldnt work.
The tablet boots into the first screen that states it is unlocked, but does not go any further.
There is no bootloader version on the top left when holding down power + volume down.
I can still get to the place where it allows me to wipe data or fastboot, but the android icon to boot into android is now gone.
adb does not recognize my device even after manually installing the drivers, but fastboot works fine.
Is there any other way to find my bootloader version?
gio3505 said:
Yes, the pictures are broken. You can still copy paste the url though. Couldnt figure out why it wouldnt work.
The tablet boots into the first screen that states it is unlocked, but does not go any further.
There is no bootloader version on the top left when holding down power + volume down.
I can still get to the place where it allows me to wipe data or fastboot, but the android icon to boot into android is now gone.
adb does not recognize my device even after manually installing the drivers, but fastboot works fine.
Is there any other way to find my bootloader version?
Click to expand...
Click to collapse
Maybe you want to edit your post with the urls then.... Makes it easier for people trying to help...
You're seriously messed up, I think. I see a USB icon in there which would indicate that your bootloader is ancient. But then it says: "starting USB fastboot protocol".
Is that after you selected the USB icon?
Anyway, I think you're only chance is buster99's method to get it back. Did you try that already?
http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
Naturally you have to extract the system blob from the 10.6.1.14.10 US Asus firmware, but then you can try to fastboot flash it with buster's method.
Good luck!
berndblb said:
Maybe you want to edit your post with the urls then.... Makes it easier for people trying to help...
You're seriously messed up, I think. I see a USB icon in there which would indicate that your bootloader is ancient. But then it says: "starting USB fastboot protocol".
Is that after you selected the USB icon?
Anyway, I think you're only chance is buster99's method to get it back. Did you try that already?
http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
Naturally you have to extract the system blob from the 10.6.1.14.10 US Asus firmware, but then you can try to fastboot flash it with buster's method.
Good luck!
Click to expand...
Click to collapse
Its starts the usb fastboot automatically if no input is selected. I had a different bootloader up until i tried that thing that buster did. It always gives me an error like cant write to system or something if i try it.
gio3505 said:
Its starts the usb fastboot automatically if no input is selected. I had a different bootloader up until i tried that thing that buster did. It always gives me an error like cant write to system or something if i try it.
Click to expand...
Click to collapse
Which blob did you flash with buster's method?
I'm afraid you flashed something totally incompatible with your tablet...
You did not generate your nvflash blobs sometime prior to this, did you?
berndblb said:
Which blob did you flash with buster's method?
I'm afraid you flashed something totally incompatible with your tablet...
You did not generate your nvflash blobs sometime prior to this, did you?
Click to expand...
Click to collapse
I flashed the asus stock rom downloaded from their website. The US version as it was bought in the US (right? 0.o). I hadnt heard of nvflash before trying to install a rom so i did not make a backup.
gio3505 said:
I flashed the asus stock rom downloaded from their website. The US version as it was bought in the US (right? 0.o). I hadnt heard of nvflash before trying to install a rom so i did not make a backup.
Click to expand...
Click to collapse
Are you sure you downloaded the correct firmware? For the TF700?
Do you still have the original zip you extracted the blob from?
Post the exact file name please.
berndblb said:
Are you sure you downloaded the correct firmware? For the TF700?
Do you still have the original zip you extracted the blob from?
Post the exact file name please.
Click to expand...
Click to collapse
US_epaduser10_6_1_14_10_UpdateLauncher (2)
or
US_epaduser_VER104425UpdateLauncher
or
US_epad_user_9_4_5_30_20120907_UpdateLauncher
Ive downloaded a lot of different versions from the asus website. The last one came from a forum post listing older firmware, which I have tried a lot of different ones.
gio3505 said:
US_epaduser10_6_1_14_10_UpdateLauncher (2)
or
US_epaduser_VER104425UpdateLauncher
or
US_epad_user_9_4_5_30_20120907_UpdateLauncher
Ive downloaded a lot of different versions from the asus website. The last one came from a forum post listing older firmware, which I have tried a lot of different ones.
Click to expand...
Click to collapse
You flashed all of those blobs???
In which order?
With what result?
Jeez - I think you're done for...
Sorry mate, but gotta catch some sleep now. Maybe somebody else has a bright idea...
berndblb said:
You flashed all of those blobs???
In which order?
With what result?
Jeez - I think you're done for...
Sorry mate, but gotta catch some sleep now. Maybe somebody else has a bright idea...
Click to expand...
Click to collapse
I flashed the newest one first, and it gave me one of those errors that wouldnt allow me to flash it, and i tried the others with the same result. So technically i didnt flash any of them. I have been able to flash some roms, but they wouldnt boot so i would be stuck where i was when i started.
gio3505 said:
I flashed the newest one first, and it gave me one of those errors that wouldnt allow me to flash it, and i tried the others with the same result. So technically i didnt flash any of them. I have been able to flash some roms, but they wouldnt boot so i would be stuck where i was when i started.
Click to expand...
Click to collapse
Right stop flashing random stuff - you have combinations of JB4.2.1, JB4.1.1 and ICS 4.0.3 just listed there.
Let me put a call out to @lj50036 who may be able to save you but if you have messed the bootloader up with no nvflash backups you are not going to be happy with the result. If you can still get to the bootloader screen then he can perform miraculous superhero acts and *maybe* save your device.
gio3505 said:
I flashed the newest one first, and it gave me one of those errors that wouldnt allow me to flash it, and i tried the others with the same result. So technically i didnt flash any of them. I have been able to flash some roms, but they wouldnt boot so i would be stuck where i was when i started.
Click to expand...
Click to collapse
Shoot me an email at [email protected]
We can use hangouts see if there is a solution to your issue ...
Thx Josh