So, you've got the latest OTA (1.55.531.3) and the HTC unlocker tool won't work? Tired of waiting for HTC to issue a fix/resume the OTA? You no longer have to wait in agony.
These are the steps I took to unlock the latest OTA. They worked for me, they may not work for you. Anything you do to your phone is not my responsibility.
That said..
Backup what you can. Your phone is going to be wiped.
Make sure your battery is charged up.
Download the full 1.55.531.3 image. This contains the confirmation splash screen which wasn't loaded on older MT4GSes, and is the reason the unlocker tool won't work on our devices. You can get the full image (it's over 400MB) here:
http://www.filefactory.com/file/c0f....00_11.16.3504.20_2_release_227956_signed.zip
Click to expand...
Click to collapse
Download the CWM recovery image:
http://download.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.7-doubleshot.img
Click to expand...
Click to collapse
Rename the full image downloaded in the first step to PG59IMG.zip and place it on the root of the SD card in your phone.
Shut the phone down, remove the battery, and boot back up while holding both the volume down and power buttons down.
The phone will check the PG59IMG.zip file and will ask you if you want to restore that image. You want to do this, but keep in mind this is going to wipe your phone. All data will be lost.
The phone will restore the image. This takes a few minutes. When it's done, you'll be prompted to reboot, and you'll boot into a completely stock MT4GS experience.
Use the unlock tool on htcdev.com to generate your unlock code. The splash screen is now on your phone, and you should be able to unlock (I had no issues).
I rebooted at this point, just to be safe, and set up my phone.
Copy the recovery image you downloaded earlier into the directory where you're running fastboot. Rename it to recovery.img
Shut down, boot into the bootloader/fastboot, and enter the following command to flash CWM recovery:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
At this point, you should probably reboot the bootloader before entering CWM. Once you've done that, you can go ahead and flash superuser/roms/etc.
Here's a pointer to restoring your phone to stock, courtesy of blue:
http://forum.xda-developers.com/showpost.php?p=17424340&postcount=24
So if we've gotten this far, is S-OFF going to gain us anything more? Are we still locked out of certain areas? The tool worked for me, but I'm using the rest of your guide to flash CWM. Thanks for writing it!
xzuhto said:
So if we've gotten this far, is S-OFF going to gain us anything more? Are we still locked out of certain areas? The tool worked for me, but I'm using the rest of your guide to flash CWM. Thanks for writing it!
Click to expand...
Click to collapse
In my opinion, S-Off won't really gain you much more. You'll have to flash kernels separately when flashing ROMs, but that doesn't seem to be a big deal (IMO).
You could probably flash back to the original release software if you wanted, and gain S-OFF with revolutionary, but I haven't tried that and have no idea if it will work.
The only thing you can't do with Unlocked/S-ON is flash radios.
Well in that case this phone is right where I want it. I've never messed with kernels on any phone I've had previously nor have I messed with flashing radios. I just got done completing the steps and I'm now root along with CWM. Great work throwing this up for everyone.
jonnycat26 said:
So, you've got the latest OTA (1.55.531.3) and the HTC unlocker tool won't work? Tired of waiting for HTC to issue a fix/resume the OTA? You no longer have to wait in agony.
These are the steps I took to unlock the latest OTA. They worked for me, they may not work for you. Anything you do to your phone is not my responsibility.
That said..
Backup what you can. Your phone is going to be wiped.
Make sure your battery is charged up.
Download the full 1.55.531.3 image. This contains the confirmation splash screen which wasn't loaded on older MT4GSes, and is the reason the unlocker tool won't work on our devices. You can get the full image (it's over 400MB) here:
Download the CWM recovery image:
Rename the full image downloaded in the first step to PG59IMG.zip and place it on the root of the SD card in your phone.
Shut the phone down, remove the battery, and boot back up while holding both the volume down and power buttons down.
The phone will check the PG59IMG.zip file and will ask you if you want to restore that image. You want to do this, but keep in mind this is going to wipe your phone. All data will be lost.
The phone will restore the image. This takes a few minutes. When it's done, you'll be prompted to reboot, and you'll boot into a completely stock MT4GS experience.
Use the unlock tool on htcdev.com to generate your unlock code. The splash screen is now on your phone, and you should be able to unlock (I had no issues).
I rebooted at this point, just to be safe, and set up my phone.
Copy the recovery image you downloaded earlier into the directory where you're running fastboot. Rename it to recovery.img
Shut down, boot into the bootloader/fastboot, and enter the following command to flash CWM recovery:
At this point, you should probably reboot the bootloader before entering CWM. Once you've done that, you can go ahead and flash superuser/roms/etc.
Click to expand...
Click to collapse
the doubleshot img downloads painfully slow, do you have another link?
edit: also i think you missed somthing here"
[*]Shut down, boot into the bootloader/fastboot, and enter the following command to flash CWM recovery:
"
ac3theone said:
the doubleshot img downloads painfully slow, do you have another link?
...
Click to expand...
Click to collapse
Well, where football is hosting the new PG59IMG.zip file is the only place we have it - i just found it yesterday and we haven't had time to up it anywhere else yet.
We are working on making mirrors for it now - give us some time to get set up with our new data.
---------- Post added at 01:38 AM ---------- Previous post was at 01:33 AM ----------
jonnycat26 said:
In my opinion, S-Off won't really gain you much more. You'll have to flash kernels separately when flashing ROMs, but that doesn't seem to be a big deal (IMO).
You could probably flash back to the original release software if you wanted, and gain S-OFF with revolutionary, but I haven't tried that and have no idea if it will work.
The only thing you can't do with Unlocked/S-ON is flash radios.
Click to expand...
Click to collapse
No, you can't go back to retail factory if you are S-ON. This new PG59IMG.zip I found is the furthest back you can go completely.
With S-ON you cannot replace hboot, or radio - those two are a big deal - i'm still working on an S-OFF solution for S-ON people with hboot 1.45.0013.
With S-OFF I can swap out hboots on a whim, and thrice43 even flashed a Sensation hboot to his doubleshot and it worked out for him - but with S-ON you cannot do this. (and if you could, you would brick)
S-OFF is very much preferable to S-ON UNLOCKED.
I've also had problems flashing OTA updates through stock recovery manually when S-ON where I had no trouble doing so while S-OFF.
There are still a lot of things you can't do with your device while S-ON.
EDIT:
also, all the PG59IMG.zip files I made for people to flash recoveries, hboots, and so on in the dev reference sticky cannot be used by anyone S-ON because they fail the signature checks. My custom PG59IMG.zip files don't have an HTC signature which you must have for an S-ON device to load the PG59IMG.zip file.
...so there are a number of reasons why S-OFF is something to get.
xzuhto said:
Well in that case this phone is right where I want it. I've never messed with kernels on any phone I've had previously nor have I messed with flashing radios. I just got done completing the steps and I'm now root along with CWM. Great work throwing this up for everyone.
Click to expand...
Click to collapse
You must flash a kernel if you want to flash an ICS ROM or any GB ROM with a modified kernel.
Also:
Here's a faster mirror, hopefully: http://www.4shared.com/zip/vVHQuid0/PG59IMG_Doubleshot_TMOUS_15553.html
I see the downsides to s-on but I'm happy to have root and cwm. I will however be excited to get this thing fully unlocked. I won't be messing with custom roms till then. lol
Sent from my myTouch_4G_Slide using Tapatalk
I managed to host it on my Dropbox
Edit:
Oh sorry Lime, I didn't see that you were already hosting it...
this might deserve a sticky?
If anyone is going to mirror it please keep the original filename - we have more then one PG59IMG.zip file with an HTC signature (retail launch and this one).
If they are not named including the software version and radio then people may be confused on what they are getting - thanks guys!
it worked, now to get su. thanks for the guide
delete post
jonnycat26 said:
So, you've got the latest OTA (1.55.531.3) and the HTC unlocker tool won't work? Tired of waiting for HTC to issue a fix/resume the OTA? You no longer have to wait in agony.
These are the steps I took to unlock the latest OTA. They worked for me, they may not work for you. Anything you do to your phone is not my responsibility.
That said..
Backup what you can. Your phone is going to be wiped.
Make sure your battery is charged up.
Download the full 1.55.531.3 image. This contains the confirmation splash screen which wasn't loaded on older MT4GSes, and is the reason the unlocker tool won't work on our devices. You can get the full image (it's over 400MB) here:
Download the CWM recovery image:
Rename the full image downloaded in the first step to PG59IMG.zip and place it on the root of the SD card in your phone.
Shut the phone down, remove the battery, and boot back up while holding both the volume down and power buttons down.
The phone will check the PG59IMG.zip file and will ask you if you want to restore that image. You want to do this, but keep in mind this is going to wipe your phone. All data will be lost.
The phone will restore the image. This takes a few minutes. When it's done, you'll be prompted to reboot, and you'll boot into a completely stock MT4GS experience.
Use the unlock tool on htcdev.com to generate your unlock code. The splash screen is now on your phone, and you should be able to unlock (I had no issues).
I rebooted at this point, just to be safe, and set up my phone.
Copy the recovery image you downloaded earlier into the directory where you're running fastboot. Rename it to recovery.img
Shut down, boot into the bootloader/fastboot, and enter the following command to flash CWM recovery:
At this point, you should probably reboot the bootloader before entering CWM. Once you've done that, you can go ahead and flash superuser/roms/etc.
Click to expand...
Click to collapse
Copy the recovery image you downloaded earlier into the directory where you're running fastboot. Rename it to recovery.img
Shut down, boot into the bootloader/fastboot, and enter the following command to flash CWM recovery:
fastboot flash recovery recovery.img
Cant do this last few steps.Don't understand what to do as yet
Scondrel said:
Copy the recovery image you downloaded earlier into the directory where you're running fastboot. Rename it to recovery.img
Shut down, boot into the bootloader/fastboot, and enter the following command to flash CWM recovery:
fastboot flash recovery recovery.img
Cant do this last few steps.Don't understand what to do as yet
Click to expand...
Click to collapse
You need to transfer the recovery image to the directory with your fastboot.exe file.
You would then need to rename it to recovery.img
Then you boot your phone into fastboot mode, and plug it into the computer.
Open a command prompt, and navigate to the directory with fastboot.exe and run the command:
fastboot flash recovery recovery.img
Thanks got it now.Appreciate the help
---------- Post added at 01:23 AM ---------- Previous post was at 12:53 AM ----------
Scondrel said:
Thanks got it now.Appreciate the help
Click to expand...
Click to collapse
Didn't work for me,I all the way to final step, but once i enter recovery for CWM,and try to flash the superuser file or anything else, it just shows the icon and nothing else happens.Once i click the power button it goes back to the CWM Home screen.Any advice on this guys ?
Scondrel said:
Thanks got it now.Appreciate the help
---------- Post added at 01:23 AM ---------- Previous post was at 12:53 AM ----------
Didn't work for me,I all the way to final step, but once i enter recovery for CWM,and try to flash the superuser file or anything else, it just shows the icon and nothing else happens.Once i click the power button it goes back to the CWM Home screen.Any advice on this guys ?
Click to expand...
Click to collapse
You are using the trackpad to "select" within CWM, not the power button, right?
jonnycat26 said:
You are using the trackpad to "select" within CWM, not the power button, right?
Click to expand...
Click to collapse
Thanks it was 'nt that. There wasn't enough space on the memory card and I didn't have USB debugging on.Got it solved now .Thanks for the speedy responses.Truly appreciated .Feels so good to be a part of this community.
jonnycat26 said:
So, you've got the latest OTA (1.55.531.3) and the HTC unlocker tool won't work? Tired of waiting for HTC to issue a fix/resume the OTA? You no longer have to wait in agony.
These are the steps I took to unlock the latest OTA. They worked for me, they may not work for you. Anything you do to your phone is not my responsibility.
That said..
Backup what you can. Your phone is going to be wiped.
Make sure your battery is charged up.
Download the full 1.55.531.3 image. This contains the confirmation splash screen which wasn't loaded on older MT4GSes, and is the reason the unlocker tool won't work on our devices. You can get the full image (it's over 400MB) here:
Download the CWM recovery image:
Rename the full image downloaded in the first step to PG59IMG.zip and place it on the root of the SD card in your phone.
Shut the phone down, remove the battery, and boot back up while holding both the volume down and power buttons down.
The phone will check the PG59IMG.zip file and will ask you if you want to restore that image. You want to do this, but keep in mind this is going to wipe your phone. All data will be lost.
The phone will restore the image. This takes a few minutes. When it's done, you'll be prompted to reboot, and you'll boot into a completely stock MT4GS experience.
Use the unlock tool on htcdev.com to generate your unlock code. The splash screen is now on your phone, and you should be able to unlock (I had no issues).
I rebooted at this point, just to be safe, and set up my phone.
Copy the recovery image you downloaded earlier into the directory where you're running fastboot. Rename it to recovery.img
Shut down, boot into the bootloader/fastboot, and enter the following command to flash CWM recovery:
At this point, you should probably reboot the bootloader before entering CWM. Once you've done that, you can go ahead and flash superuser/roms/etc.
Click to expand...
Click to collapse
These instructions worked perfectly! Can not believe it worked. This should be stickied! Thank you.
tbalden said:
this might deserve a sticky?
Click to expand...
Click to collapse
revo420 said:
This should be stickied!
Click to expand...
Click to collapse
Eh, why not. Done .
Related
Phone: HTC Evo
Requirement: NAND unlock S-OFF (this allows for unsigned ROM)
Format: PC36IMG.ZIP
OS: 3.30.651.2 (2.6.32-15 Kernal)
Radio: 9.01
hboot: 2.02.0000
recovery: clockworkMod 2.5.0.1
WIMAX: 26023
PRI Version: 1.77_003
Wipes all user data: YES
Rooted: Yes
Link: http://www.megafileupload.com/en/file/278989/PC36IMG-zip.html
How to install: Download the file from the link above and and rename it from [Megafileupload]PC36IMG.zip to PC36IMG.zip. Place the file "PC36IMG.ZIP" file on the root of the SD-CARD. Power down the phone. Power up the phone while holding down the volume down button. The phone will prompt you to install a new rom, follow the prompts and reboot after flashing.
Purpose:
To create a current base rom to flash other roms without starting at the 1.47 PC36IMG.zip version.
Disclaimer: I am not responsible for any damage to your phone! Please do a nano backup prior to using this rom. This definately is a test rom, worked perfectly for myself, but not tested by anyone else. If you have any problems, boot into recovery and restore your nano backup.
Acknowledgments:
All the developers that have shared their hard work on XDA!
Note: You can unzip the file, remove the modules like ClockWorksMod or hboot then rezip the file as PC36IMG.zip to prevent those portions from being installed if you prefer.
I was just about to request this. Thanks!
Just to Clarify: (not that your directions weren't clear, just want to make sure there are no hiccups for anyone.)
The phone will scan for and find the image.
It will take a little while to load. Should have a blue status bar to the right.
Do you want to start update? Volume Up: Yes
Once it is finished: Do you want to reboot device? Volume Up: Yes
uberlemur let me know how it works for you. Like I said I only tested it on my phone. But I am confident that it will work, or I wouldn't have tried it on my own phone.
Karadorde, thanks for the more detailed instructions.
weidnerj said:
uberlemur let me know how it works for you. Like I said I only tested it on my phone. But I am confident that it will work, or I wouldn't have tried it on my own phone.
Karadorde, thanks for the more detailed instructions.
Click to expand...
Click to collapse
Yours were fine and it is pretty self explanatory, but I know doing things through HBoot can sometimes be daunting for those who have never tried it.
Just wanted to clarify if flashing this IMG with the .79 hboot will re lock Nand protection. I've used Toasts part 1&2 and yet skeptical about using unrevoked forever.
good stuff man!
Here is a picture of my Evo screen. I had used unrevoked forever prior to flashing the rom.
weidnerj said:
Here is a picture of my Evo screen. I had used unrevoked forever prior to flashing the rom.
Click to expand...
Click to collapse
The reason why I asked is that when rooting a new EVO,the radio, pri and wimax partitions get downgraded(using the traditional root method). With this, you can revert to the most current partitions all in a single flash including the Rom base instead of multiple flashes correct ??
You are correct, as long as you have ran the unrevoked forever to turn off the NAND unlock S-OFF prior to installing this ROM so that you can flash unsigned ROMs. This ROM has root built into it, so it would be just one step process to flash with this rom to have the latest of everything yet still have root.
mendez_v said:
Just wanted to clarify if flashing this IMG with the .79 hboot will re lock Nand protection. I've used Toasts part 1&2 and yet skeptical about using unrevoked forever.
Click to expand...
Click to collapse
Sounds like you will lose the Engineering HBOOT if you use this zip.
weidnerj said:
You are correct, as long as you have ran the unrevoked forever to turn off the NAND unlock S-OFF prior to installing this ROM so that you can flash unsigned ROMs. This ROM has root built into it, so it would be just one step process to flash with this rom to have the latest of everything yet still have root.
Click to expand...
Click to collapse
Thanks. My only question now is can I expect the same results if I obtained S-OFF through Toasts part 2, simple root or any other method other than unrevoked?
thanks
it worked
mobilemaniac said:
Sounds like you will lose the Engineering HBOOT if you use this zip.
Click to expand...
Click to collapse
Yep. Two different hboot.imgs. You can still take advantage of this information though. Keep your engineering bootloader but still update your radio, pri, etc.
noob here... in a bit of a bind
i did this update and it gave me this message
[5] BOOT Fail-pu
now the phone just goes to a back screen with green writing
ClockworkMod Recovery v2.5.0.1
what did i do?!?!?
peepeesea said:
noob here... in a bit of a bind
i did this update and it gave me this message
[5] BOOT Fail-pu
now the phone just goes to a back screen with green writing
ClockworkMod Recovery v2.5.0.1
what did i do?!?!?
Click to expand...
Click to collapse
Try it again.
Or if trying it again fails, you can boot into recovery and restore your nano backup. The part that failed is the system, but clockworkmod is still here.
weidnerj said:
uberlemur let me know how it works for you. Like I said I only tested it on my phone. But I am confident that it will work, or I wouldn't have tried it on my own phone.
Karadorde, thanks for the more detailed instructions.
Click to expand...
Click to collapse
The first time I tried I got a Fail-PU message for the boot partition. I'm pretty sure that's my phone's fault though, as the boot partition has been acting screwed up for days. (Not coincidentally, this is the reason I was looking for a complete PC36IMG.zip).
I flashed it a second time though, and all was well. Thanks again.
uberlemur thanks for the feedback.
Hopefully peepeesea was able to get it to work or able to restore the old nano backup...
So I guess that means that I have had 2 successful installations. LOL
will this work if you have Amon_RA recovery already?
I wanted to flash to ARHD 6.3
This is my first time.. I managed to S off.. But then the bootloop began after I flashed PG58IMG.zip via fastboot.
Step 1. To S-OFF your Sensation - (You do not need to do this if you have S-off already or done this before) - WORKING NOW for TMOUS users
Visit
download the application for your operating System. AND EXTRACT IT TO A FOLDER
YOU MAY NEED TO DISABLE YOUR ANTIVIRUS PROGRAM- Norton is flagging up Revolutionary as a Virus when it isn't
IMPORTANT
Fill out the form under the download links with your OS, Device, Hboot Version and Serial number. This will give your beta key to enable you to S - OFF. Make a note of this.
How To get your Hboot Version - 3 methods below
1. [/url] and if it has found your device it should read
"Found your Device: HTC Sensation Z710* Applications -> Development)
4. With the phone switched on (not in HBOOT, just the regular home screen), plug in your USB cable and select HTC sync mode.(IGNORE any warning messages on your phone telling you it cannot find HTC Sync )
5. Launch revolutionary.exe. It should detect the phone and ask for your beta key. Type it (BE CAREFUL, as its case sensitive) or copy and paste it in.
If Revolutionary fails to find your phone verify you have all the drivers installed, try disk drive mode or charging mode (Linux users can use disk drive mode. Confirmed to be working by others)
6. Once you have entered your beta key correctly, follow any on screen prompts or actions from revolutionary and wait for it to S-Off,
7. You're done. Your Device will Successfully have S-OFF....if it hangs on method 3 and doesn't S-Off. See post 2 below for solutions.
IF REVOLUTIONARY SAYS FAILED YOUR PHONE IS NOT SUPPORTED. Go back and check hboot using the methods above. some users are told its failed and they still have S off now. If you have S-off your hboot will now be 1.17.1011 and revolutionary will tell you now your device is not supported
8. Revolutionary will now ask you to Install clockwork recovery mod after S OFF. Type N and install it manually below (the recovery provided is v4.0.1.4 doesn't charge when device is switched off, the one below v5.0.0.1 does charge)
9. Your Device now is S-off.
To install clockwork recovery for the sensation. Follow step 2!
STEP 2. To INSTALL Recovery - v5.0.0.8
1. Download recovery v5.0.0.8 for the Sensation HERE: or Multiupload
2. Copy the PG58IMG file into the Root folder of your SD card (The main Folder of your Memory Card)
3. Turn off your phone FUlly and reboot into the Bootloader/HBOOT screen (see post above on how to get to hboot screen)
4. Press Volume up to Accept when it asks" Do you want to start the update"
5. Press Power Off to Reboot back to android after installation is successful (normal screen with homescreen)
Click to expand...
Click to collapse
I got stuck at step 2.5.. Pls help me out. Actually I used to flash ROM for i9000 a couple of times but for sensation this is my first time. I'm using sensation unlocked. I lived in Malaysia so most probably its asians version.
ethanmars said:
I wanted to flash to ARHD 6.3
This is my first time.. I managed to S off.. But then the bootloop began after I flashed PG58IMG.zip via fastboot.
I got stuck at step 2.5.. Pls help me out. Actually I used to flash ROM for i9000 a couple of times but for sensation this is my first time. I'm using sensation unlocked. I lived in Malaysia so most probably its asians version.
Click to expand...
Click to collapse
Hi,
Try loading 5.0.2.0 HERE
Then follow THIS GUIDE to install 6.3.0
thank you so much for your reply!
i've downloaded that. Now how do i install it? fastboot only accept .zip files right? or is the instruction is in the 2nd link you gave me?
ethanmars said:
thank you so much for your reply!
i've downloaded that. Now how do i install it? fastboot only accept .zip files right? or is the instruction is in the 2nd link you gave me?
Click to expand...
Click to collapse
Hi,
Just rename 5.0.2.0 to PG58IMG.zip
Power off
Power on holding volume- and power button.
When it has finished,delete PG58IMG.zip
malybru said:
Hi,
Just rename 5.0.2.0 to PG58IMG.zip
Power off
Power on holding volume- and power button.
When it has finished,delete PG58IMG.zip
Click to expand...
Click to collapse
just pressed thanks, hehe..
i was wandering alone while waiting for your reply n managed to install ext4 touch recovery.. lol.. but still bootloop when pressed reboot.
now I wanna know will the 5.0.2.0 help me to access android again coz i haven't backup my contacts n sms yet..
let's say the answer is no, will it help if i make a nandroid backup now? or is it too late considering i cant access android anymore?
ethanmars said:
just pressed thanks, hehe..
i was wandering alone while waiting for your reply n managed to install ext4 touch recovery.. lol.. but still bootloop when pressed reboot.
now I wanna know will the 5.0.2.0 help me to access android again coz i haven't backup my contacts n sms yet..
let's say the answer is no, will it help if i make a nandroid backup now? or is it too late considering i cant access android anymore?
Click to expand...
Click to collapse
Hi,
Lesson for the future...
Always backup(nandroid,Titanium Backup,google) BEFORE starting anything major.
If you have 4EXT installed,then follow THIS GUIDE to install 6.3.0
malybru said:
Hi,
Lesson for the future...
Always backup(nandroid,Titanium Backup,google) BEFORE starting anything major.
If you have 4EXT installed,then follow THIS GUIDE to install 6.3.0
Click to expand...
Click to collapse
thanks again ..
so that means there's no way to access my phone like it was before eh?
btw, i thought it wasnt anything major coz it was just gaining an s off n then installing recovery.. then this happened.. i dont know what went wrong.. hmm
so i shall proceed with installing 6.3.0 since its like the only option i have left i believe?
ethanmars said:
thanks again ..
so that means there's no way to access my phone like it was before eh?
btw, i thought it wasnt anything major coz it was just gaining an s off n then installing recovery.. then this happened.. i dont know what went wrong.. hmm
so i shall proceed with installing 6.3.0 since its like the only option i have left i believe?
Click to expand...
Click to collapse
Hi,
Just as a matter of interest.
Do you still have a PG58IMG.zip on your sd card?
If so ,delete it.
Then it may boot into your ROM...
malybru said:
Hi,
Just as a matter of interest.
Do you still have a PG58IMG.zip on your sd card?
If so ,delete it.
Then it may boot into your ROM...
Click to expand...
Click to collapse
oh i've read that as well so i have deleted it manually by using sd adapter.. then reinserted it back n tried to boot normally.. but to no avail.. what's the root cause of this eh?
when i gained s off, i still can boot into my ROM.. however disaster happens when i flashed the .zip files obtained as per instructions..
oh but directly after i've flashed it, i didn't remove the .zip files n tried to immediately reboot into ROM.. does this make a difference?
ethanmars said:
oh i've read that as well so i have deleted it manually by using sd adapter.. then reinserted it back n tried to boot normally.. but to no avail.. what's the root cause of this eh?
when i gained s off, i still can boot into my ROM.. however disaster happens when i flashed the .zip files obtained as per instructions..
Click to expand...
Click to collapse
Hi,
Did you complete the s-off thread by rooting and getting SuperCID?
malybru said:
Hi,
Did you complete the s-off thread by rooting and getting SuperCID?
Click to expand...
Click to collapse
good question..
immediately after s off, i boot into my ROM and tried to install busybox and other apps that requires superuser or root but failed and stating that my device was still not rooted..
so i proceed to install a recovery (in this case its ext4 recovery) but failed to find a .zip installer (but managed to find the .apk and .img version but afraid to proceed considering the extension wasn't the same as per guide's PG5...ZIP). so i tried to simply install cwm as per stated in the guide. coz i know after recovery is installed, only then i would be able to install the su zip files.
then it boot looped.. n here we are trying to shoot all of these troubles.. XD
and if my understanding was wrong, pls correct me. thanks!
only after you sent me the links i managed to install ext4 recovery via a much easier method using cmd.exe..
n that also means that i wasn't even able to follow through the supercid part of the guide..
ethanmars said:
good question..
immediately after s off, i boot into my ROM and tried to install busybox and other apps that requires superuser or root but failed and stating that my device was still not rooted..
so i proceed to install a recovery (in this case its ext4 recovery) but failed to find a .zip installer (but managed to find the .apk and .img version but afraid to proceed considering the extension wasn't the same as per guide's PG5...ZIP). so i tried to simply install cwm as per stated in the guide. coz i know after recovery is installed, only then i would be able to install the su zip files.
then it boot looped.. n here we are trying to shoot all of these troubles.. XD
and if my understanding was wrong, pls correct me. thanks!
only after you sent me the links i managed to install ext4 recovery via a much easier method using cmd.exe..
Click to expand...
Click to collapse
Hi,
I follow THIS GUIDE
If you have 4EXT installed ,then you should be able to boot into recovery and make a nandroid,then root,then supercid...
malybru said:
Hi,
I follow THIS GUIDE
If you have 4EXT installed ,then you should be able to boot into recovery and make a nandroid,then root,then supercid...
Click to expand...
Click to collapse
wait a moment, i dont know if things are making more sense to me but, is it possible that this was caused by a wrong firmware? i just figured out my cid and its htc_044 and there are 4 different version of firmware for this cid, so should i try each of it until my phone boots to my original ROM?
Update: Oh God, I'm in such a relief! Thank God it works now. I flashed the firmware 1.17 n now am able to boot back into my ROM. Now i'm gonna get things backed up n will proceed. phew thanks so much for helping me out. The cause was maybe the zip files werent compatible with mine. So i check my cid n mid, n downloaded what might be the original one. so now its fixed..
I unlocked my MT4GS's bootloader a few months ago using HTC's tool, but I now find myself in a place where I need to reflash a stock ROM due to miscellaneous malfunctions. It's not for warranty/damage, I tried to restore my ROM to factory settings and couldn't due to removing the Sense UI for ADWLauncher. I tried to reflash my ClockWorkMod stock ROM backup, but it had a MD5 mismatch (and, sadly, was deleted accidently last night in organizing my SD card).
I am on an unlocked bootloader with S-ON RL showing on the boot screen. I have tried downloading one of the SG59IMG.zip files (both the latest 1.63 release, and the 1.55 release), but those do not work. I place them on my SD Card's root and allow HBOOT to find them, but it reports "Wrong ZIP!". I've read that re-locking my bootloader will fix this; any confirmation?
At this point, what I really want to do is get my phone back on a stock ROM, with or without ClockWorkMod, and start over again with the rooting process. As I said, this isn't for warranty service; I want to make sure I have a good stock recovery image available and that I have a solidly working phone while I wait for an ICS ROM that's stable for everyday use to come around.
Thanks in advance for any help.
WinterHalliwell said:
I unlocked my MT4GS's bootloader a few months ago using HTC's tool, but I now find myself in a place where I need to reflash a stock ROM due to miscellaneous malfunctions. It's not for warranty/damage, I tried to restore my ROM to factory settings and couldn't due to removing the Sense UI for ADWLauncher. I tried to reflash my ClockWorkMod stock ROM backup, but it had a MD5 mismatch (and, sadly, was deleted accidently last night in organizing my SD card).
I am on an unlocked bootloader with S-ON RL showing on the boot screen. I have tried downloading one of the SG59IMG.zip files (both the latest 1.63 release, and the 1.55 release), but those do not work. I place them on my SD Card's root and allow HBOOT to find them, but it reports "Wrong ZIP!". I've read that re-locking my bootloader will fix this; any confirmation?
At this point, what I really want to do is get my phone back on a stock ROM, with or without ClockWorkMod, and start over again with the rooting process. As I said, this isn't for warranty service; I want to make sure I have a good stock recovery image available and that I have a solidly working phone while I wait for an ICS ROM that's stable for everyday use to come around.
Thanks in advance for any help.
Click to expand...
Click to collapse
Get the stock recovery from the devs section, Change " SG59IMG.zip" to " PG59IMG.zip", relock the bootloader so that hboot will see the zip. I think the lock command is "fastboot oem lock". To unlock it again you would have to flash the unlock token again
Sent from my DoubleShot Lite using Tapatalk
ac3theone said:
Get the stock recovery from the devs section, Change " SG59IMG.zip" to " PG59IMG.zip", relock the bootloader so that hboot will see the zip. I think the lock command is "fastboot oem lock". To unlock it again you would have to flash the unlock token again
Sent from my DoubleShot Lite using Tapatalk
Click to expand...
Click to collapse
Whoops, it is PG59IMG already, just at work and wasn't in front of my phone at the time to confirm the file name. Is there a way to relock my bootloader without using the fastboot program from my computer? I've already uninstalled all of the HTC/ADB stuff to save processing power on my netbook and I'd like to avoid reinstalling it all if at all possible.
WinterHalliwell said:
Whoops, it is PG59IMG already, just at work and wasn't in front of my phone at the time to confirm the file name. Is there a way to relock my bootloader without using the fastboot program from my computer? I've already uninstalled all of the HTC/ADB stuff to save processing power on my netbook and I'd like to avoid reinstalling it all if at all possible.
Click to expand...
Click to collapse
Theres no other way that i know of sry
Sent from my DoubleShot Lite using Tapatalk
http://forum.xda-developers.com/showpost.php?p=17424340&postcount=24
That covers everything.
WinterHalliwell said:
... Is there a way to relock my bootloader without using the fastboot program from my computer? I've already uninstalled all of the HTC/ADB stuff to save processing power on my netbook and I'd like to avoid reinstalling it all if at all possible.
Click to expand...
Click to collapse
Ask and ye shall receive - I put together a package with the bare minimum you need to use ADB or fastboot. At about 736kb I think it's exactly what you were looking for.
(windows machine)
You don't need to install the entire SDK just to get the ADB or fastboot tools - all you need is what's here.
doubleshot_adb-fastboot.zip
Download Link
MD5: 47e72c0a2e2c1caaabd95b5df83e8913
Size: 736.03 KB
I also included a command prompt .bat file (Command.bat) so that when you unzip the archive to a folder, open that folder and double-click the Command.bat file and it will open you up to a command prompt already in the folder with the tools, wherever it is.
No more typing in some annoying CD command to get to the directory with the tools - simply open the folder (wherever it is at the time) and run Command.bat.
You will be ready to just dive right into ADB or fastboot commands (which is all you want, anyway, right?)
You will need the fastboot drivers for the doubleshot installed if they are not - get them here:
HTCDriver.exe
Download Link
MD5: 7fe1a01a816722718c6d369a3dc49166
Size: 13.08 MB
...and these are the same drivers that originally came on the SDcard of the doubleshot when you first got it. If you lost them, you can grab them again.
Enjoy!
So get this: I've got a friend who owns this One X, right? He got it replaced, and he got back a phone running the "new OTA", which I'm assuming is 2.20. He unlocked his bootloader and got root, and tried to flash a custom recovery (CWM from what he tells me), and then it died. He knows that I'm good at the whole Android thing, so he gave me the phone with the task of bringing it back to life.
Given that my regular phone is a GNex, "bricked" and "softbricked" aren't terms I use often, so I'm not entirely sure it's applicable to this situation. But, I'll tell you everything I know about the situation.
When I power it up, it comes up with the htc splash, then the "This build is for development purposes only..." message. It stays like that for a little bit, then the screen goes off. It comes back within five seconds, and it just continues ad nauseum.
I'm able to get into hboot and fastboot (booting into the bootloader with power+voldown) and execute fastboot commands, but I really don't know what I should do, and even if I do, I don't have the files I need.
The bootloader has this information; I'm fairly sure it can help...
Code:
evita pvt ship s-on rl
HBOOT 1.14.0002
eMMC boot
Radio - 0.19as.32.09.11_2
I executed a fastboot command (I forget which one), and I wrote down the value...
Code:
mainver: 2.20.502.7
I assume this is the installed system version, or something similar, but please correct me if I'm wrong xD
All I'm trying to do is to get this thing to boot into Android. If I can do that much, I'm sure he'd be more than elated. Thing is, I'm not entirely sure what's wrong with this phone, much less what I'd have to do to fix it.
TL;DR
My friend's phone is screwed up, how do I fix it?
wiiareonfire said:
So get this: I've got a friend who owns this One X, right? He got it replaced, and he got back a phone running the "new OTA", which I'm assuming is 2.20. He unlocked his bootloader and got root, and tried to flash a custom recovery (CWM from what he tells me), and then it died. He knows that I'm good at the whole Android thing, so he gave me the phone with the task of bringing it back to life.
Given that my regular phone is a GNex, "bricked" and "softbricked" aren't terms I use often, so I'm not entirely sure it's applicable to this situation. But, I'll tell you everything I know about the situation.
When I power it up, it comes up with the htc splash, then the "This build is for development purposes only..." message. It stays like that for a little bit, then the screen goes off. It comes back within five seconds, and it just continues ad nauseum.
I'm able to get into hboot and fastboot (booting into the bootloader with power+voldown) and execute fastboot commands, but I really don't know what I should do, and even if I do, I don't have the files I need.
The bootloader has this information; I'm fairly sure it can help...
Code:
evita pvt ship s-on rl
HBOOT 1.14.0002
eMMC boot
Radio - 0.19as.32.09.11_2
I executed a fastboot command (I forget which one), and I wrote down the value...
Code:
mainver: 2.20.502.7
I assume this is the installed system version, or something similar, but please correct me if I'm wrong xD
All I'm trying to do is to get this thing to boot into Android. If I can do that much, I'm sure he'd be more than elated. Thing is, I'm not entirely sure what's wrong with this phone, much less what I'd have to do to fix it.
TL;DR
My friend's phone is screwed up, how do I fix it?
Click to expand...
Click to collapse
He probably forgot to flash boot.img in fastboot.
If you are bricked, this phone will not turn on and be listed as QHSUSB_DLOAD in windows.
edit: cwm + evita(htc one xl) = bad.
he needs TWRP
wiiareonfire said:
So get this: I've got a friend who owns this One X, right? He got it replaced, and he got back a phone running the "new OTA", which I'm assuming is 2.20. He unlocked his bootloader and got root, and tried to flash a custom recovery (CWM from what he tells me), and then it died. He knows that I'm good at the whole Android thing, so he gave me the phone with the task of bringing it back to life.
Given that my regular phone is a GNex, "bricked" and "softbricked" aren't terms I use often, so I'm not entirely sure it's applicable to this situation. But, I'll tell you everything I know about the situation.
When I power it up, it comes up with the htc splash, then the "This build is for development purposes only..." message. It stays like that for a little bit, then the screen goes off. It comes back within five seconds, and it just continues ad nauseum.
I'm able to get into hboot and fastboot (booting into the bootloader with power+voldown) and execute fastboot commands, but I really don't know what I should do, and even if I do, I don't have the files I need.
The bootloader has this information; I'm fairly sure it can help...
Code:
evita pvt ship s-on rl
HBOOT 1.14.0002
eMMC boot
Radio - 0.19as.32.09.11_2
I executed a fastboot command (I forget which one), and I wrote down the value...
Code:
mainver: 2.20.502.7
I assume this is the installed system version, or something similar, but please correct me if I'm wrong xD
All I'm trying to do is to get this thing to boot into Android. If I can do that much, I'm sure he'd be more than elated. Thing is, I'm not entirely sure what's wrong with this phone, much less what I'd have to do to fix it.
TL;DR
My friend's phone is screwed up, how do I fix it?
Click to expand...
Click to collapse
sounds like your FRIEND needs to flash in fastboot the boot.img that came with his rom...
Crappyvate said:
sounds like your FRIEND needs to flash in fastboot the boot.img that came with his rom...
Click to expand...
Click to collapse
absolutelygrim said:
He probably forgot to flash boot.img in fastboot.
Click to expand...
Click to collapse
Would I be able to get a stock boot.img and system.img from the 2.20 RUU? Should I even use the RUU for this?
wiiareonfire said:
Would I be able to get a stock boot.img and system.img from the 2.20 RUU? Should I even use the RUU for this?
Click to expand...
Click to collapse
what ROM did he flash. copy the boot.img from that ROM and flash it in fastboot, then flash the ROM
First, extract boot.img onto comp. Move boot.img into adb files. Rezip Rom and transfer to sdcard. Fire up command prompt where you stored boot.img. type --> fastboot flash boot boot.img
Once successful, flash Rom IN RECOVERY. profit
Tell your FRIEND to follow posts before blindly flashing, he'd be more prepared
sent from my venom injected, blazingly fast as f#&k OneXL via xda premium
Can you get into boot loader? Hold the volume down whilst the phone boots. Flash TWRP!! Clockworkmod is not supported for our device. Oh and very first. Make sure you have the Evita not the international one x.
Check this thread out. Might help
http://forum.xda-developers.com/showthread.php?p=33303798
Sent from my One X using xda premium
absolutelygrim said:
what ROM did he flash. copy the boot.img from that ROM and flash it in fastboot, then flash the ROM
Click to expand...
Click to collapse
He didn't flash any ROM, only CWM. He wasn't ever able to get into recovery to flash anything.
subarudroid said:
Can you get into boot loader? Hold the volume down whilst the phone boots. Flash TWRP!! Clockworkmod is not supported for our device. Oh and very first. Make sure you have the Evita not the international one x.
Check this thread out. Might help
http://forum.xda-developers.com/showthread.php?p=33303798
Sent from my One X using xda premium
Click to expand...
Click to collapse
Just did that, and it's still not working. Can't even boot into recovery.
I'm gonna need a boot.img, but he started from stock OTA. I don't know how the boot.img could've gone bad from flashing a bad recovery, but I'll try that anyway.
Question is, where would I get a boot.img for the stock sense ROM? Or, how would I be able to flash a ROM without being able to get into recovery?
wiiareonfire said:
He didn't flash any ROM, only CWM. He wasn't ever able to get into recovery to flash anything.
Just did that, and it's still not working. Can't even boot into recovery.
I'm gonna need a boot.img, but he started from stock OTA. I don't know how the boot.img could've gone bad from flashing a bad recovery, but I'll try that anyway.
Question is, where would I get a boot.img for the stock sense ROM? Or, how would I be able to flash a ROM without being able to get into recovery?
Click to expand...
Click to collapse
hold your horses, let's take a deep breath here. Have you tried to reboot in recovery through adb ? If that does not work why don't you try to fastboot flash a proper recovery for the one x, TWRP http://forum.xda-developers.com/showpost.php?p=33179690&postcount=1
Crappyvate said:
hold your horses, let's take a deep breath here. Have you tried to reboot in recovery through adb ? If that does not work why don't you try to fastboot flash a proper recovery for the one x, TWRP http://forum.xda-developers.com/showpost.php?p=33179690&postcount=1
Click to expand...
Click to collapse
Code:
C:\Android>adb reboot recovery
error: device not found
Surprisingly enough, you need to be booted into android for adb commands to work. Even the bootloader option for "recovery" gets me nowhere.
Out of nowhere, he tells me he tried to flash a rom.
Ali: the rom that i flashed hmmm.
if i sent that to you would you be able to do anything?
well, tried flashing?
Me: a download link would be preferable
but yes, i'll need that
Ali Haider: got it.
give me a few minutes.
what if the rom wasn't supported?
because i can't completely remember which of the several roms i tried to flash were the problem
Me: what do ya mean "not supported"
Ali:
like clockwork- it apparently doesn't work
Me:
gimme whichever you flashed most revently
a link
i'll need the boot.img
and if you don't know which rom, gimme a list to narrow it down
and i'll go one by one
Click to expand...
Click to collapse
TL;DR, he flashed with CWM and that's why it's screwed up.
Ladies and gents, we might be getting somewhere with this. Albeit, slowly, thanks to my friend who can't read the posts.
I think Crappyvate has the right idea here. You need to flash a proper recovery.
Sent from my One X using xda premium
subarudroid said:
I think Crappyvate has the right idea here. You need to flash a proper recovery.
Click to expand...
Click to collapse
So I've flashed TWRP at least three different times, and I can't the phone to boot into it.
I've flashed two different boot.img files, no avail.
He claims all he's done is fastboot flash CWM, and then the thing went down the drain. Splash screen over and over again, exactly what I'm seeing here. Is there any reason that flashing TWRP over it wouldn't work? Is there a fastboot command I can use to make sure the partition is clean?
wiiareonfire said:
So I've flashed TWRP at least three different times, and I can't the phone to boot into it.
I've flashed two different boot.img files, no avail.
He claims all he's done is fastboot flash CWM, and then the thing went down the drain. Splash screen over and over again, exactly what I'm seeing here. Is there any reason that flashing TWRP over it wouldn't work? Is there a fastboot command I can use to make sure the partition is clean?
Click to expand...
Click to collapse
What happens after flashing twrp in flashboot ? what msg do you get ?
Okay, scratch that. I flashed TWRP again and again through fastboot, and instead of using "recovery", I used "factory reset", and it opened up TWRP.
Fun fact: it's not able to mount the /sdcard, so using adb to push the zip for the ROM just crashes TWRP. That was my last-ditch plan to get the ROM file onto the phone to flash it. Anyone else got any idea how to get a file on there?
wiiareonfire said:
Okay, scratch that. I flashed TWRP again and again through fastboot, and instead of using "recovery", I used "factory reset", and it opened up TWRP.
Fun fact: it's not able to mount the /sdcard, so using adb to push the zip for the ROM just crashes TWRP. That was my last-ditch plan to get the ROM file onto the phone to flash it. Anyone else got any idea how to get a file on there?
Click to expand...
Click to collapse
thats a cwm classic it corrupted the SD card. you need to reformat the sd card, can you mount usb through twrp ?
Crappyvate said:
thats a cwm classic it corrupted the SD card. you need to reformat the sd card, can you mount usb through twrp ?
Click to expand...
Click to collapse
I formatted it... I think correctly? NTFS, right? If not, what file system, and what program should I use to format it that way?
I believe Fat32, but I may be wrong on that.
And you can use windows built in formatter.
wiiareonfire said:
I formatted it... I think correctly? NTFS, right? If not, what file system, and what program should I use to format it that way?
Click to expand...
Click to collapse
yep fat 32, dunno windows sorry...
Yup fat32. That what I did. My first hox I soft bricked as well with cwm
Sent from my One X using xda premium
I formatted with FAT32... It's still not accepting the file. TWRP crashes when the adb push command is finished. Is there something I'm missing?
Hey guys,
Tonight I went to install cleanrom on my Verizon HTC One M8. I made a nandroid backup as I always do before flashing a new ROM and then proceeded to flash the new ROM. That went great but then I did something I wouldn't normally do I wiped my data just because I wanted a fresh start and all of my important stuff was backed up online. But when I went to boot I'm stuck on the HTC logo. I have an OTG cable so I proceeded to put the ROM on a flash drive and flash it. Same problem. So I put my old ROM ViperOne 2.4 on the flash drive and flashed it. Now I instantly boot into fastboot. This all seems really strange to me but I'm sure its caused by me stupidly formatting data. I need a bigger flash drive to install the original nandroid backup I found online so I will get one today and post my results. I'm almost positive that will fix my problem but I know there might be an HTC guru out there that knows exactly what my problem is and it may be more then what I'm thinking. Sorry this is scattered ive been messing with my phone all night and kinda tired now. Any help is greatly appreciated and thank you in advance for taking time to help me with this issue. And if I missed anything let me know and I will be sure to post it.
Edit
Sorry I completely forgot to add that I put my nandroid backup on my flash drive but when I went to use it it did not work. I believe this is because I did not have a big enough flash drive so it did not completely back up. LOL! Tonight was not my night.
radiowavedev said:
Hey guys,
Tonight I went to install cleanrom on my Verizon HTC One M8. I made a nandroid backup as I always do before flashing a new ROM and then proceeded to flash the new ROM. That went great but then I did something I wouldn't normally do I wiped my data just because I wanted a fresh start and all of my important stuff was backed up online. But when I went to boot I'm stuck on the HTC logo. I have an OTG cable so I proceeded to put the ROM on a flash drive and flash it. Same problem. So I put my old ROM ViperOne 2.4 on the flash drive and flashed it. Now I instantly boot into fastboot. This all seems really strange to me but I'm sure its caused by me stupidly formatting data. I need a bigger flash drive to install the original nandroid backup I found online so I will get one today and post my results. I'm almost positive that will fix my problem but I know there might be an HTC guru out there that knows exactly what my problem is and it may be more then what I'm thinking. Sorry this is scattered ive been messing with my phone all night and kinda tired now. Any help is greatly appreciated and thank you in advance for taking time to help me with this issue. And if I missed anything let me know and I will be sure to post it.
Click to expand...
Click to collapse
Did you flash newest "firmware" as well? The 2.xx.xxx.x ROM's need newest firmware to boot correctly. (Radio, hboot). Old hboot would cause it to hang at boot.
When I flash ROMs in TWRP I go into advanced and check data, dalvik cache, system, and data every time, never had an issue.
andybones said:
When I flash ROMs in TWRP I go into advanced and check data, dalvik cache, system, and data every time, never had an issue.
Click to expand...
Click to collapse
+1
andybones said:
When I flash ROMs in TWRP I go into advanced and check data, dalvik cache, system, and data every time, never had an issue.
Click to expand...
Click to collapse
That is why this was so strange to me. The hboot firmware sounds promising though.
bigblueshock said:
Did you flash newest "firmware" as well? The 2.xx.xxx.x ROM's need newest firmware to boot correctly. (Radio, hboot). Old hboot would cause it to hang at boot.
Click to expand...
Click to collapse
Thank you for the response. I never even knew it was necessary to flash hboot. I've flashed a couple of ROMs before and never flashed hboot. I will try this tonight. Is this just as simple as flashing a zip? And I pick the newest available version?
radiowavedev said:
Thank you for the response. I never even knew it was necessary to flash hboot. I've flashed a couple of ROMs before and never flashed hboot. I will try this tonight. Is this just as simple as flashing a zip? And I pick the newest available version?
Click to expand...
Click to collapse
not just hboot my friend.
the whole firmware.
if you were to take the OTA you would get this firmware installed.
since we are S-OFF and we don't want to take the OTA, as it's MUCH easier to just fastboot the firmware.zip once someone takes the OTA and pulls all the needed files..
here is the thread you want - here
here is a direct copy and paste from the thread full credit to the OP
"4.4.3 DOWNLOADS BELOW no boot or recovery included in this (what this means is that you won't have to re-flash a custom recovery after the firmware, they removed it to make things easier on us.)
https://www.androidfilehost.com/?fid=23622183712470028
CREDIT TO dottat as he posted it 1st so no need for me too well just use his. Be sure to thank him if you see if around.
Flash via fastboot or Sd card method. Flash at your own risk.
directions for flashing firmware via fastboot an radios below.
Place the zip in your fastboot/adb directory on your computer.
Put the device in fastboot mode
(Volume down and power until menu appears, select fastboot using power button)
Connect the device to the computer
Enter the following commands from terminal/command prompt in the fastboot directory, one at a time:
fastboot oem rebootRUU (this puts the device in RUU mode)
fastboot flash zip firmware.zip (rename file to firmware.zip)
It will say that the update did not finish, to flush again, so repeat the above step:
fastboot flash zip firmware.zip
Then fastboot reboot-bootloader��
FYI on my m8 i did not need to be reflushed on 1.55 but on the new update it did.
credit for these directions also come from santod "
andybones said:
not just hboot my friend.
the whole firmware.
if you were to take the OTA you would get this firmware installed.
since we are S-OFF and we don't want to take the OTA, as it's MUCH easier to just fastboot the firmware.zip once someone takes the OTA and pulls all the needed files..
here is the thread you want - here
here is a direct copy and paste from the thread full credit to the OP
"4.4.3 DOWNLOADS BELOW no boot or recovery included in this (what this means is that you won't have to re-flash a custom recovery after the firmware, they removed it to make things easier on us.)
https://www.androidfilehost.com/?fid=23622183712470028
CREDIT TO dottat as he posted it 1st so no need for me too well just use his. Be sure to thank him if you see if around.
Flash via fastboot or Sd card method. Flash at your own risk.
directions for flashing firmware via fastboot an radios below.
Place the zip in your fastboot/adb directory on your computer.
Put the device in fastboot mode
(Volume down and power until menu appears, select fastboot using power button)
Connect the device to the computer
Enter the following commands from terminal/command prompt in the fastboot directory, one at a time:
fastboot oem rebootRUU (this puts the device in RUU mode)
fastboot flash zip firmware.zip (rename file to firmware.zip)
It will say that the update did not finish, to flush again, so repeat the above step:
fastboot flash zip firmware.zip
Then fastboot reboot-bootloader��
FYI on my m8 i did not need to be reflushed on 1.55 but on the new update it did.
credit for these directions also come from santod "
Click to expand...
Click to collapse
Thank you for all of the useful information I will give this a shot tonight.
radiowavedev said:
Thank you for all of the useful information I will give this a shot tonight.
Click to expand...
Click to collapse
Quite welcome, be sure to go into the thread I posted and thank them, it's all their words, I simply copy and pasted it for you.
andybones said:
Quite welcome, be sure to go into the thread I posted and thank them, it's all their words, I simply copy and pasted it for you.
Click to expand...
Click to collapse
Yeah I'm quite used to the ways of XDA but honestly had no idea about hboot. And I definitely will be thanking them. I'm now home and will test it out. I'll post my results afterwards.
andybones said:
Quite welcome, be sure to go into the thread I posted and thank them, it's all their words, I simply copy and pasted it for you.
Click to expand...
Click to collapse
Okay so I downloaded m8.443.firmware.zip does this have to be flashed via fastboot? And once I flash it should I flash my custom rom cleanrom 2.0 rc and that should be it for my issue?
radiowavedev said:
Okay so I downloaded m8.443.firmware.zip does this have to be flashed via fastboot? And once I flash it should I flash my custom rom cleanrom 2.0 rc and that should be it for my issue?
Click to expand...
Click to collapse
well in bootloader/fastboot yes.. but you DO NOT run the fastboot command..
this is exactly what you do
1) the file you downloaded, m8.443.firmware.zip - rename this to firmware.zip
2) adb reboot bootloader (or however you get there)
3) fastboot oem rebootRUU - this is the important part you will be brought to a black screen with a gray HTC logo IIRC, run the next command - the green bar may stop 3/4 of the way this is because you when you run the last command it will finish it.
4) fastboot flash zip firmware.zip
5) fastboot reboot-bootloader
Im sorry this might be stupid but what do you mean by not running fastboot command? And you say reboot-bootloader shouldn't I do reboot-recovery and flash my custom rom after factory resetting of course. Sorry im just trying to make sure im thorough. I would think messing up hboot would permanently brick my phone.
andybones said:
well in bootloader/fastboot yes.. but you DO NOT run the fastboot command..
this is exactly what you do
1) the file you downloaded, m8.443.firmware.zip - rename this to firmware.zip
2) adb reboot bootloader (or however you get there)
3) fastboot oem rebootRUU - this is the important part you will be brought to a black screen with a gray HTC logo IIRC, run the next command - the green bar may stop 3/4 of the way this is because you when you run the last command it will finish it.
4) fastboot flash zip firmware.zip
5) fastboot reboot-bootloader
Click to expand...
Click to collapse
Would it just be easier to use a nandroid backup?
I figure in the meantime ill fill you in on everything I know about my phone. I was previously running the newest version of ViperOne which was 2.5.0 This problem came up after flashing cleanrom 2.0 RC. I am S-off and unlocked of course and I am running CWM-based Recovery v6.0.4.8 and my hboot stats are as follows:
***UNLOCKED***
M8_WLV PVT SHIP S-OFF
CID-VZW__001
HBOOT-3.16.0.0000
RADIO-0.89.20.0321
OpenDSP-v38.2.2-00542-M8974.0311
OS-1.55.605.2
eMMC-boot 2048MB
I have searched the forums looking for anything related to my issue and cant seem to come up with anything. I have come across a few people with the same issues as me but there questions go unanswered which makes me very nervous... I do believe it is related to my hboot firmware but I cant seem to find a thorough explanation of hboot. Sorry I am a former Motorola guy. This HTC stuff is really mixing it up for me. LOL!
I really appreciate all of the help you have given me and am grateful that you are hanging in with my HTC stupidity and phobia of bricking this 700 dollar piece of aluminum and magnesium.
radiowavedev said:
I figure in the meantime ill fill you in on everything I know about my phone. I was previously running the newest version of ViperOne which was 2.5.0 This problem came up after flashing cleanrom 2.0 RC. I am S-off and unlocked of course and I am running CWM-based Recovery v6.0.4.8 and my hboot stats are as follows:
***UNLOCKED***
M8_WLV PVT SHIP S-OFF
CID-VZW__001
HBOOT-3.16.0.0000
RADIO-0.89.20.0321
OpenDSP-v38.2.2-00542-M8974.0311
OS-1.55.605.2
eMMC-boot 2048MB
I have searched the forums looking for anything related to my issue and cant seem to come up with anything. I have come across a few people with the same issues as me but there questions go unanswered which makes me very nervous... I do believe it is related to my hboot firmware but I cant seem to find a thorough explanation of hboot. Sorry I am a former Motorola guy. This HTC stuff is really mixing it up for me. LOL!
I really appreciate all of the help you have given me and am grateful that you are hanging in with my HTC stupidity and phobia of bricking this 700 dollar piece of aluminum and magnesium.
Click to expand...
Click to collapse
Separate the terminology "ROM" and "Firmware" for a moment. Firmware should/will never change regardless of what ROM's you flash. Think of firmware as a computers BIOS, And ROM as your computers operating system.
First, turn your phone off. Second, hold volume down + power button and do NOT let go of volume down until you're in the boot loader screen. Step 3) switch the boot loader into fast boot within that screen(Fast boot or fast boot USB may come up by default it will be highlighted in red). If you're plugged up to your computer via USB, it should automatically say "Fastboot USB". Then you can execute the commands in the command prompt andybones was talking about.
Did i loose you anywhere?
You could just nandroid back to your previous ROM... but that defeats the purpose. You'll never be able to go to a newer Sense ROM without the firmware upgrade anyway. You might as well get it done because it may improve your network signal, boot times, etc. Usually only benefits you,
After you upgrade firmware, it will say hboot 3.18.0000, Radio: 1.09.20.0702,
radiowavedev said:
Would it just be easier to use a nandroid backup?
Click to expand...
Click to collapse
I didn't just waste my time to write you up a STEP BY STEP FOOL proof guide.
I am not doing this for my benefit...
You made a thread.
You asked for help.
I gave detailed, if you mess up you didn't follow them exactly..
Why would you have me give you exact directions to fix your phone, then ask about a nandroid?
NO. If it were that simple my friend, don't you think I would have let you known this?
I'm sorry if this comes off rude, but I went out of my way to give you exact detailed instructions and you blow them off.
Why make a thread and then not take the advice from a Recognized Contributor to this site!?
I hope you can understand how frustrating this is.
I don't do this because it's fun for me to help get your phone fixed, I do it because you asked for help, and I like to help, but when my help goes un-heard and blown off - I walk away. - Best of luck my friend.
I am still going to help because that's the kind of guy I am..
Run the RUU since you are S-OFF if nothing else works.
You are a SOFT-brick. Very easy to fix.
Andybones, I totally understand. I wasnt trying to be rude im just confused and trying to come up with ideas. I understand it was dumb to mention the nandroid now. I hope you can accept my sincerest apology. I appreciate everything you have done for me and understand if you dont want to help me any longer. Like I said it was not my intention to be rude but I see how it can look like that. I just dont know what im doing.
Hi there, I believe I may have been in the same position as you at some point. What actually is happening is that you are trying to flash a new ROM (4.4.3 I believe) with the old hboot. The ROM should still boot but it will take up to 20min.
How to fix this:
1. Boot into boot loader, (manually or adb)
2. Choose fastboot
3. Connect to USB
4. Open command prompt
5. Fastboot devices
6. fastboot oem rebootRUU
7. You should see a black screen with a dark HTC logo.
8. fastboot flash zip (nameofzip).zip
9. When it finishes type fastboot reboot-bootloader (hyphen required)
10. You just flashed the new firmware but it has no os. You now need to flash a ROM or restore a nandroid backup.
Sent from my HTC One M8 GPE converted using XDA Premium mobile app