Database Info

Help And Hi

Yup i signed up as i have a problem, The phone model is s710 which im guessing by the looks of it is this one. Heres the problem, My brother gave me his htc phone with this rom file from this site on ,Dont ask me what one as i dont know but basicly it fails completly, its so slow its unbarable to use and near impossible. But i cant re do the rom to another one without the activesync drive for the phoneas he didnt give me the cd, Does any one know where i can get the driver.. I have the newest active sync installed.
Thatnks Tom2oo8

hey tom. try this when u have downloaded the rom u like, i assume u want a factory rom so download it from htc. or from the ftp here...
turn off your phone
press the camera button
plug the usb wire
be amazed by the 3-color screen
ok now your phone is recognized for flashing a rom.

You can get the active sync at download.microsoft.com go to the windows mobile section and you should find it!

If you also get the lastest active sync...divers are not necessary...couse it is detected as generic RNDIS by Windows...

[Q] HTC HD7 Diag Mode and Zune need some help

This mode was accidentally entered when I'm trying to boot my htc hd7 and press camera button together with volume up (around 20sec while the phone booting). For your information, my htc hd7 having problem with zune application and my device manager recognize it as unknown devices (yellow exclamation mark).
It was caused when I've sideloading USBModeSwitch.xap and change from ZUNE to DIAG mode. After the phone restarting, the apps has been revoke then i've no chances to install the apps again to fix it back to ZUNE mode.
Now the phone can operate as usual but cannot recognize by zune (yellow exlamation mark in device manager in PC).
The good news is, the phone had recognized by pc when entering this mode. and the devices manager detect the phone under Portable Devices -> Schubert. Can we sideloading apps using this mode? If yes... it was a good news for those having the same problem with me. But the question is.. HOW.
Note: After the incident, I already flash the phone. but still unable to be detected by ZUNE Desktop in normal state. it can operate, can install from market place as usual but cannot sync with zune desktop. Can somebody help me on this? Sorry for my English. You may refer with my attachment for the images and the XAP application.
Note 2: Never try the USBModeSwitch.xap if your phone is not fully unlock or will facing the same problem with me. hope someone can fix this issue. because lot of friends are stuck in this doom.

same problem here....
an hd7 too...

First, are your phones unlocked? I assume they are. Otherwise you wouldn't be able to deploy this USB-whatever.xap.
You may try deploying smth after running WPConnect (Phone has to be connected already). This small consoleapp does some funny stuff with the phone/PC connection. So maybe your devices will be recognized this way.
Best you start WPConnect from commandline, to have a look at the output, which should be smth like "[Devicename] successfuly connected..." or such.
C~

tried it, doesn't help
the phone is not unlocked anymore... that is the problem in my case ;-)
but i was able to install the HTC Diagnostic Drivers...
but i dont know if i can use it to disable Diag-Mode...

And you are not able to re-unlock your phone (via official or Chevron)? Have you tried to unlock after connecting - closing Zune - running WPConnect?
This is just a mere guess, but hey, who knows it maybe work

we cannot lock our devices as neither zune nor WPConnect realize that the phone is connected (because of it is in Diagnostic-Mode)
but thanks for your reply ;-)

Oberoth said:
we cannot lock our devices as neither zune nor WPConnect realize that the phone is connected (because of it is in Diagnostic-Mode)
but thanks for your reply ;-)
Click to expand...
Click to collapse
Yup that's true. I try to used ansar ROM, flash it, but nothing change. I wonder if we can custom a rom and implement the extract file of USBModeswitch.xap to the rom. so that the phone will boot with usbmodeswitch installed in it, using this step, we're able to switch the mode from diag back to zune.
This the final technique might can help for now. For the ROM, i can only break/extract until I've got the 2 OS file:- 2_os.nb.extra (±2.4MB) and the other one is 2_os.nb.payload (±181MB). Ok, until then, I was stuck. if not... we can extract the XAP directly to the OS folder, then repacking back the ROM. the 2_os.nb.payload file was unable to extract to bin file. Error shown:- "no boot partition". Maybe I'm using the old WinMo tools to extract it.
ahhh.... gosh... stuck in this step. any help and guide will be much appreciated.

AzmanIshak said:
Yup that's true. I try to used ansar ROM, flash it, but nothing change. I wonder if we can custom a rom and implement the extract file of USBModeswitch.xap to the rom. so that the phone will boot with usbmodeswitch installed in it, using this step, we're able to switch the mode from diag back to zune.
This the final technique might can help for now. For the ROM, i can only break/extract until I've got the 2 OS file:- 2_os.nb.extra (±2.4MB) and the other one is 2_os.nb.payload (±181MB). Ok, until then, I was stuck. if not... we can extract the XAP directly to the OS folder, then repacking back the ROM. the 2_os.nb.payload file was unable to extract to bin file. Error shown:- "no boot partition". Maybe I'm using the old WinMo tools to extract it.
ahhh.... gosh... stuck in this step. any help and guide will be much appreciated.
Click to expand...
Click to collapse
Hi,
from your writing i can read that you have the needed knowledge to make this thing...
so how long do you think will it take to get the two files...
and if you get these files, how can we flash that ROM without HSPL or SSPL?
thanks for your answer ;-)

our problem is... there's still no kitchen for WP7 (temporary). So.. we have to wait Da_G or Ansar.Ath.Gr work. they might have some tools that can help us. I knew.. lot of our friend already stuck in this mode as well. So... there's no sync with zune for us... no music transfer via usb.. and we have to forget all the thing that we can do using the USB cable except for charging it. lol~ how sick...

yeah...
i can only listen to radio in the morning when i drive to school...
i hate the most of the breakfast-shows
i have another idea instead of waiting for an C-ROM...
but that is only possible with a clean, Chevron-Unlocked and USB-Switch installed WP7 phone...
so nothing personally...
and we need to wait for the update...
the whole clean system would be backed up and could be used for our WP7 devices to get the USBSwitch-App onto our phone (holding camera-key when starting to install backup)
would be great if there is anybody who makes it...

hi
ask the autor of this http://forum.xda-developers.com/showthread.php?t=922000
maybe he can help ,his tool use usbmodeswitch.

im active in his thread too, but he didn't answer at all...

I have actally done this myself sadly the only option I had was to sync all my contacts with Windowslive and reset the HD7 by holding both volume keys while powering it on from a cold boot.

AzmanIshak said:
This mode was accidentally entered when I'm trying to boot my htc hd7 and press camera button together with volume up (around 20sec while the phone booting). For your information, my htc hd7 having problem with zune application and my device manager recognize it as unknown devices (yellow exclamation mark).
It was caused when I've sideloading USBModeSwitch.xap and change from ZUNE to DIAG mode. After the phone restarting, the apps has been revoke then i've no chances to install the apps again to fix it back to ZUNE mode.
Now the phone can operate as usual but cannot recognize by zune (yellow exlamation mark in device manager in PC).
The good news is, the phone had recognized by pc when entering this mode. and the devices manager detect the phone under Portable Devices -> Schubert. Can we sideloading apps using this mode? If yes... it was a good news for those having the same problem with me. But the question is.. HOW.
Note: After the incident, I already flash the phone. but still unable to be detected by ZUNE Desktop in normal state. it can operate, can install from market place as usual but cannot sync with zune desktop. Can somebody help me on this? Sorry for my English. You may refer with my attachment for the images and the XAP application.
Note 2: Never try the USBModeSwitch.xap if your phone is not fully unlock or will facing the same problem with me. hope someone can fix this issue. because lot of friends are stuck in this doom.
Click to expand...
Click to collapse
can you tell me what rom was on the phone and what rom you flashed After you F*****up your phone ?
I want to know what Radio was on it , I think that tool does something with the radio rom on the phone , it could help the flash an older rom using a goldcard with an older radiorom in it.
edit:
maybe it is the spl , try to flash a rom with a lower/higher spl number.

ceesheim said:
can you tell me what rom was on the phone and what rom you flashed After you F*****up your phone ?
I want to know what Radio was on it , I think that tool does something with the radio rom on the phone , it could help the flash an older rom using a goldcard with an older radiorom in it.
edit:
maybe it is the spl , try to flash a rom with a lower/higher spl number.
Click to expand...
Click to collapse
Hi Ceesheim, thanks for reply. I'm not remember my preveous ROM, by the way
currently only RUU_Schubert_hTC_Asia_WWE_1.23.707.01_Radio_5.51.09.06a_22.30.50.09U_Signed_by_ansar that can be flash to my phone.

AzmanIshak said:
Hi Ceesheim, thanks for reply. I'm not remember my preveous ROM, by the way
currently only RUU_Schubert_hTC_Asia_WWE_1.23.707.01_Radio_5.51.09.06a_22.30.50.09U_Signed_by_ansar that can be flash to my phone.
Click to expand...
Click to collapse
thats a modded rom (don't use it)
try this one :
http://forum.xda-developers.com/showthread.php?t=853945

Hi
i think the best way to fix your problem is this rom.
http://forum.xda-developers.com/showthread.php?t=948497
this one contain developer tools & can help you with usb problem.
send me a pm after install it an maybe we can fix this.

xboxmod said:
Hi
i think the best way to fix your problem is this rom.
http://forum.xda-developers.com/showthread.php?t=948497
this one contain developer tools & can help you with usb problem.
send me a pm after install it an maybe we can fix this.
Click to expand...
Click to collapse
ok... will test it now. thanks!
I'll report to you after complete. thanks again~

xboxmod said:
Hi
i think the best way to fix your problem is this rom.
http://forum.xda-developers.com/showthread.php?t=948497
this one contain developer tools & can help you with usb problem.
send me a pm after install it an maybe we can fix this.
Click to expand...
Click to collapse
I already download and install to my PC. but cannot flash to my phone.
Currently the only ROM that my HD7 can flash is with this number: 1.23.707.01

Make a goldcard and then flash it
Sent from my HD7 T9292 using Board Express

[q] htc hd2 no usb at bootloader

HI everyone, am new to this but quickly understands things fast. I try to clean install my htc hd2 coz i have flash a lot of rom on it and have now decided the one that is best for me. Now i want to clean install my device, am able to get to boot loader but instead usb in the white rectangle it says serial. sometimes nothing show there and as soon as i take the cable off is says serial. Also my windows 7 laptop is asking me to install some drivers. I thought drivers will not be needed for this. Searched almost everywhere for drivers but can't find one. Pls Help me.

Accent color for WP7 tango for HTC

Hi. I was wondering, is there any way I could get custom accent colors for tiles on my HTC 1st. generation device? It is interop unlocked, couldn't get it fully unlocked :/ I tried deploying some .xap files like WP7 Root tools and Advanced config, but I get this error when deploying a .xap, Error - 0x81030120. Current accent colors are a little bit boring, so... I am new when it comes to this :/ Thanks.

You dont want to flash custom rom?

Loco5150 said:
You dont want to flash custom rom?
Click to expand...
Click to collapse
I do want, but whenever I try to, I get to some step and it says that my phone isn't connected to computer when it clearly is. Can you give me a link to mango ROM's [fully unlocked, right?] for HTC 7 Trophy? I can't do HSPL/RSPL for the reason mentioned above.

You should be able to flash HSPL and then custom rom to your 1st gen HTC device. If you follow all steps correctly it should not be a problem. You entered manually to bootloader and you have installed WMDC to your PC (Windows Mobile Device Center)?
I suggest you go back to http://forum.xda-developers.com/forumdisplay.php?f=812 the Trophy section, find out where you made a mistake and try to get HSPL installed. When that is done you can flash fully unlocked custom rom.

Loco5150 said:
You should be able to flash HSPL and then custom rom to your 1st gen HTC device. If you follow all steps correctly it should not be a problem. You entered manually to bootloader and you have installed WMDC to your PC (Windows Mobile Device Center)?
I suggest you go back to http://forum.xda-developers.com/forumdisplay.php?f=812 the Trophy section, find out where you made a mistake and try to get HSPL installed. When that is done you can flash fully unlocked custom rom.
Click to expand...
Click to collapse
for some reason, it's not working, I follow all these steps and I get an error when i try to HSPL in bootloader, but I get no "USB" word at the white area below on screen :/ And, I get this message in HSPL tool: I tried to reboot it, and yes, I have WMDC installed. But even on WMDC it states that my phone is not connected I can easily connect my phone to computer, but only when it's not in bootloader, and everything works, zune, app deployment..
[Error Description]:
Please make sure that your device connected to computer.
also make sure that right drivers are installed (they comes with WMDC / AS usually)
Try to connect device to different USB port and also you can try to reboot PC.
[Info]: USBWorkRSPL.cpp (184)
I even tried RSPL, but no results that device is connected to computer

For me this seems like a problem on your PC side. Im not a guru or anything, but what I would try to do is:
1. Uninstall WMDC and Zune
2. Run CCleaner or similar cleanup utility to remove crap thats left behind.
3. Download new packages to re-install WMDC and Zune.
4. Use another USB port and remove all other USB devices (I remember sometimes even usb mouse on a laptop has caused irratic behaviour)
5. Use different USB-cable
6. If you have messed around with your USB-port settings at somepoint (maybe when doing something else) these would need to be restored to default.
7. Try to get connection again.
If these steps would not work, I would try to flash using another computer, friends, mothers, etc... I would questimate that the problem has to be on your PC side as you cant establish connection. This would be naturally confirmed by testing to flash on other system.
Edit: Also, could your firewall be blocking the connection?

Help my xperia z3 please!!! cant connect xperia z3 to pc

hello can somebody help me with this problem? i try to connect my xperia z3 to my laptop and nothing happen, my device doesnt charging, no notification on my device, my laptop shows usb dont recognize, and read from previous forum, try to install the driver through device manager it shows "unknown usb device (port reset failed) and then i update the driver and the windows shows "windows has determine your software driver is up to date", i try factory reset xperia z3, reinstall my windows but it shows the same, then i try to install the driver through add legacy hardware in device manager, then install the driver, and it show "windows has stopped this device, this device couldn't start"
my os is marshmallow, and i have try using different cable and it doesnt work (
please someone help me to fix this (

Maybe try the solutions mentioned here:
https://www.drivereasy.com/knowledge/how-to-fix-unknown-usb-device-port-reset-failed-issue/
(the ones you didn't try already of course).
It seems to be a Windows 10 problem so try to check your device with another (preferably not Win 10) PC if you have access to one.

Omario-242 said:
Maybe try the solutions mentioned here:
https://www.drivereasy.com/knowledge/how-to-fix-unknown-usb-device-port-reset-failed-issue/
(the ones you didn't try already of course).
It seems to be a Windows 10 problem so try to check your device with another (preferably not Win 10) PC if you have access to one.
Click to expand...
Click to collapse
hei thank you, i have try your solution but it still doesnt work, i dont know what happen, the usb still says port reset failed, and i cant install xperia z3 driver manually, it says something like find 64xbit driver etc

is there any way to flash rom without connect to pc ? or how to root and install twrp in xperia z3 without pc so i can flash rom through twrp

Mccaggy said:
is there any way to flash rom without connect to pc ? or how to root and install twrp in xperia z3 without pc so i can flash rom through twrp
Click to expand...
Click to collapse
please somebody help me i have try everything, using diferrent usb cable, different pc, installing driver manually and etc but it still can connect to pc im doing this for a month and i really really stress now, because i need usb mtp to move my college data from phone to my laptop, i cant even charge my phone using usb port on my laptop the only thing i never try is flashing new rom, i just need to find way to root and install twrp without using pc so i can flash rom through twrp

Mccaggy said:
please somebody help me i have try everything, using diferrent usb cable, different pc, installing driver manually and etc but it still can connect to pc im doing this for a month and i really really stress now, because i need usb mtp to move my college data from phone to my laptop, i cant even charge my phone using usb port on my laptop the only thing i never try is flashing new rom, i just need to find way to root and install twrp without using pc so i can flash rom through twrp
Click to expand...
Click to collapse
Sry to hear but if it is a driver problem, the only solution would be to manually install the right drive package (64bit in your case probably). If you aren't to, you'd have to unlock bootloader to flash a rom etc which means losing your data.
BUT if you just want to get data from your phone why don't you upload it to something like Dropbox or Google Drive. Or for a direct push try Pushbullet (App for Android and program for Windows, set up with same account) and you can just send those files.

Omario-242 said:
Sry to hear but if it is a driver problem, the only solution would be to manually install the right drive package (64bit in your case probably). If you aren't to, you'd have to unlock bootloader to flash a rom etc which means losing your data.
BUT if you just want to get data from your phone why don't you upload it to something like Dropbox or Google Drive. Or for a direct push try Pushbullet (App for Android and program for Windows, set up with same account) and you can just send those files.
Click to expand...
Click to collapse
Thanks before, can you give me link for driver Xperia z3 64bit? I cant unlock bootloader if my device isn't detected by computer not for data only, i need charge from laptop if in emergency situations

I did it like 3 years ago so don't know if those links are still working but I did it with those two guides (one is German though):
https://www.randombrick.de/sony-xperia-z3-fastboot-unter-windows-mit-den-richtigen-treibern/
For the manual installations of the driver:
https://android.stackexchange.com/questions/129174/windows-10-fastboot-driver
Direct link to fastboot driver:
http://developer.sonymobile.com/downloads/drivers/fastboot-driver/
Hope this helps.
EDIT: You can also try with the driver installation with flash tool, but you have to disable the windows signature verification check (google, there's loads of tutorials).