Related
I have flashed dutty's v4 rom and i want to change it
the problem is that when i try to do so i run
KaiserCustomRUU
my device goes into the 4 stripes screen it says usb
but then the program in the pc says error 260 and doesn't load the new rom
my phone still works as dutty's rom is still in but what can i do to change it?
Thank you and i have searched a lot but could not find a solution
thimiost said:
I have flashed dutty's v4 rom and i want to change it
the problem is that when i try to do so i run
KaiserCustomRUU
my device goes into the 4 stripes screen it says usb
but then the program in the pc says error 260 and doesn't load the new rom
my phone still works as dutty's rom is still in but what can i do to change it?
Thank you and i have searched a lot but could not find a solution
Click to expand...
Click to collapse
OK lets start at the basics...... In bootloader mode (tricolour screen) what text does it say at top of the screen?
Have you DEFINITELY Sim Unlocked and CID unlocked?
it says these things
kais130 mfg
spl-10.0.Olipof
cpld-8
Ok that confirms you have the capability to flash. I have seen in the past some people have managed to flash one time only using jumpspl but then their device reverts back to original bootloader...I was one of those people
Next question then...Can you boot the phone normally and gain an activsync connection to it?
yes
i can use my phone normally
only i cannot put a new image in
Are you using Xp or vista? If using vista it may be worth trying a reboot... sometimes it goes doolally with its usb ports. If you cannot see the phone through WMDC or activsync after a reboot it is worth going to SYSTEM (on your PC) viewing non present devices through device manager,( Drop to Command prompt and type... Devmgmt.msc set DEVMGR_SHOW_NONPRESENT_DEVICES=1 ) removing the relevant phone connection and then re attaching it so that windows re detects it.
If you can get a connection via actvisync (win XP) or WMDC (vista) to your phone then all should be ok. Uncheck the activesync/ WMDC "allow USB connections" and try again.
If this still doesn't work then search around here for MTTY. That will allow you to specify the usb connection to the device...amongst other things.
thank you for your time
i have win xp and activesync works nice
the problem is when bootloader starts
When you attempt flashing, do you do it from the device already booted into windows mobile or direct from bootloader?
Which ever way you have tried it, try ther other way.
Not teaching you to suck eggs but just in case you dont know.... To get direct to bootloader hold camera button and soft reset with stylus whilst holding camera button down and the tri colour screen should appear.
With device at the bootloader screen, Can you confirm that you hear the windows "noise" when you unplug and re plug the USB cable just as you would when plugging and unplugging the device normally. This will determine if the device has connection at the bootlaoder stage.
why not just flash using the microsd card. its much easier that way
yes it has connection
the thing is that i have already flashed as i told before with dutty's v4
now i can't
Usually Error 260's are related to the USB port functionality ( Port can't be opened etc).
The SD card method or MTTY should sort you out.
thx again
hope it works
at least the sd trick worked!!!!
now running on winmob 6.1
Glad to hear you sorted it.
almost
i cannot use my sd card cause i have to have it formated in order to put a new rom in
thimiost said:
i cannot use my sd card cause i have to have it formated in order to put a new rom in
Click to expand...
Click to collapse
disable USB connections in ActiveSync and flash.
This Link gives a list of eror codes for Hermes, and probably the same for Kaiser.
It's likely that you have a USB port error - maybe try changing the USB port you use or a different sync cable - or just stick to SD card flashing in the future - I keep an old 1gig card for this.
this IS the problem...i cannot flash...
it stays in the bootloader with the message i wrote
thimiost said:
it stays in the bootloader with the message i wrote
Click to expand...
Click to collapse
It happen to me before hardspl again fix it, not sure why
you mean use the sd method to do hardspl again?
OHHH lord dutty we need your new rom
Hello guys!
I've got a bit of a problem here, because now my mobile refuses to connect with activesync and therefore making it impossible to flash it.
I read the readme in the cid bypass folder, and didn't quite understand it, but as keen as I was on getting a new rom I did it all wrong.
I actually copied the cid bypass folder to my sd-card and ran haret.exe from the phone. A friendly penguin appeared along with some green text, and it rebooted and went black. I waited for a while, but had no patience so I rebooted it again. But after this it has been impossible to connect it with activesync! I've tried hard reset and different computers but nothing works!
I'm hoping someone on this forum can help me!
best regards
Try this.
turn your phone off and press the camera button in then plug it into the USB port
you should get a multi color screen. If you do then you can flash.
But go here http://forum.xda-developers.com/showthread.php?t=330909
Go to where it says EDIT and follow what it says.
Oh and when a dos box opens up and ask you things just press the return key each time.
good luck
hey man, I tried reflashing the original rom to my vox, with the manualstyle sd card flash. So now it's flashed with the original rom, but still activesync doesn't work! anybody have an idea on how to make this right?
somebody tried running haret.exe from their phone, then flashing the Uspl with ruu flasher and then flash the new cooked rom?
My phone is not able to connect for flashing while in black state (after running harET), is it stupid of me to reboot it and start it by holding camera button while plugging it in to the computer? and then flash it with the ruu?
somebody please help me?
go into settings then connections then more till you see USB to PC
in there un-tick the box which says enable advaned network.
zipuz said:
somebody tried running haret.exe from their phone, then flashing the Uspl with ruu flasher and then flash the new cooked rom?
My phone is not able to connect for flashing while in black state (after running harET), is it stupid of me to reboot it and start it by holding camera button while plugging it in to the computer? and then flash it with the ruu?
somebody please help me?
Click to expand...
Click to collapse
I am confused..is it working or not? one post you say it is but you cant sink..then you say its not.????
and dont use the flash off the mem stick..use windows..
ok, sorry for making confusing posts! I'm just excited about getting it to work.
So here's the situation:
From stock phone used with exchange (turned off the exchange part before doing anything)
1. I ran haret.exe from my phone, and it rebooted into a "black state" after which I rebooted it again
2. I tried to connect it to my computer using activesync, to be able to flash, but it wouldn't connect. Activesync doesn't respond to my phone.
3. I flashed the shipped rom to my phone from my sd-card in good hope that it would reset the whole process, but it still won't connect to activesync.
So here's my problem; I want to flash a cooked rom to my phone, but I'm unable to connect it to my computer via activesync, what to do?
deuse said:
go into settings then connections then more till you see USB to PC
in there un-tick the box which says enable advaned network.
Click to expand...
Click to collapse
tried with both ticked and unticked, still nothing
Turn off your phone then keep the camera button pressed in at the same time plug it into the usb port
your should show diff colors on the screen..if so follow what it says in this link.
http://forum.xda-developers.com/showthread.php?t=330909
and do it from the pc not your mobile...
it's restored, but no activesync still
Is the cable you are using ok? or is it a new one you just got.
does windows see it when you plug it in? if so un-install active sync then reinstall it.
I'm having the same issue with Windows Mobile 6.5 ROM, activesync simply doesn't work ;/
ivanek666 said:
I'm having the same issue with Windows Mobile 6.5 ROM, activesync simply doesn't work ;/
Click to expand...
Click to collapse
Have you been into settings and un-ticked the box in USB to PC?
Also if you are trying to sync to office you must create a new partnership
google is your best friend.
I have no problems with sync in XP/Vista?windows 7 and office 2007
I am using FMs 1.1 WM 1.1
deuse said:
Is the cable you are using ok? or is it a new one you just got.
does windows see it when you plug it in? if so un-install active sync then reinstall it.
Click to expand...
Click to collapse
Windows notices my mobile (installs new drivers), but activesync doesn't register the device.
zipuz said:
Windows notices my mobile (installs new drivers), but activesync doesn't register the device.
Click to expand...
Click to collapse
Do the Hard reset .Then connect it to your machine.I hope this time it will work smoothly.
zipuz said:
Windows notices my mobile (installs new drivers), but activesync doesn't register the device.
Click to expand...
Click to collapse
Try this
open sync then at the top chose files then click on DELETE MOBILE DEVICE
see what happens..but post back if you fix it to help other people
yogusmilu said:
Do the Hard reset .Then connect it to your machine.I hope this time it will work smoothly.
Click to expand...
Click to collapse
I failed to mention that I've tried the hard reset as well, no luck.
I thought about the same thing Deuse, but there's no mobile device registered, so I'm not able to delete it.
It seems that you have tried every possible method! Anyway, my suggestion is install activesync in some other PC (friend's) and connect your phone there. See if it registers the phone. If it does then it is problem with the PC and not with phone. In that case, connect phone to PC and open controlpanel>System (icon)>Hardware tab>Device Manager Button in your PC. Unfold Network adapters and see if your phone is detected properly or it is detected with an "!" mark in "Unknown/Other device". If so, delete the device and disconnect phone. Reboot PC, reboot phone connect again and let the PC reinstall your device and see if it recognises your phone.
One more way (I think you might have tried this)- Uninstall Activesync and reinstall and connect phone.
By the way if your phone is not recognised in some other PC then it seems trouble with the phone.
Thanks.
Looks like your cable is faulty. Try activesync connection through bluetooth (for testing, ofcourse you cant flash from bt ).
parthabhatta said:
It seems that you have tried every possible method! Anyway, my suggestion is install activesync in some other PC (friend's) and connect your phone there. See if it registers the phone. If it does then it is problem with the PC and not with phone. In that case, connect phone to PC and open controlpanel>System (icon)>Hardware tab>Device Manager Button in your PC. Unfold Network adapters and see if your phone is detected properly or it is detected with an "!" mark in "Unknown/Other device". If so, delete the device and disconnect phone. Reboot PC, reboot phone connect again and let the PC reinstall your device and see if it recognises your phone.
One more way (I think you might have tried this)- Uninstall Activesync and reinstall and connect phone.
By the way if your phone is not recognised in some other PC then it seems trouble with the phone.
Thanks.
Click to expand...
Click to collapse
It's marked with an "!", will try it on my own pc next time I have it, worked there last time! if not, I'll have to live with
This mode was accidentally entered when I'm trying to boot my htc hd7 and press camera button together with volume up (around 20sec while the phone booting). For your information, my htc hd7 having problem with zune application and my device manager recognize it as unknown devices (yellow exclamation mark).
It was caused when I've sideloading USBModeSwitch.xap and change from ZUNE to DIAG mode. After the phone restarting, the apps has been revoke then i've no chances to install the apps again to fix it back to ZUNE mode.
Now the phone can operate as usual but cannot recognize by zune (yellow exlamation mark in device manager in PC).
The good news is, the phone had recognized by pc when entering this mode. and the devices manager detect the phone under Portable Devices -> Schubert. Can we sideloading apps using this mode? If yes... it was a good news for those having the same problem with me. But the question is.. HOW.
Note: After the incident, I already flash the phone. but still unable to be detected by ZUNE Desktop in normal state. it can operate, can install from market place as usual but cannot sync with zune desktop. Can somebody help me on this? Sorry for my English. You may refer with my attachment for the images and the XAP application.
Note 2: Never try the USBModeSwitch.xap if your phone is not fully unlock or will facing the same problem with me. hope someone can fix this issue. because lot of friends are stuck in this doom.
same problem here....
an hd7 too...
First, are your phones unlocked? I assume they are. Otherwise you wouldn't be able to deploy this USB-whatever.xap.
You may try deploying smth after running WPConnect (Phone has to be connected already). This small consoleapp does some funny stuff with the phone/PC connection. So maybe your devices will be recognized this way.
Best you start WPConnect from commandline, to have a look at the output, which should be smth like "[Devicename] successfuly connected..." or such.
C~
tried it, doesn't help
the phone is not unlocked anymore... that is the problem in my case ;-)
but i was able to install the HTC Diagnostic Drivers...
but i dont know if i can use it to disable Diag-Mode...
And you are not able to re-unlock your phone (via official or Chevron)? Have you tried to unlock after connecting - closing Zune - running WPConnect?
This is just a mere guess, but hey, who knows it maybe work
we cannot lock our devices as neither zune nor WPConnect realize that the phone is connected (because of it is in Diagnostic-Mode)
but thanks for your reply ;-)
Oberoth said:
we cannot lock our devices as neither zune nor WPConnect realize that the phone is connected (because of it is in Diagnostic-Mode)
but thanks for your reply ;-)
Click to expand...
Click to collapse
Yup that's true. I try to used ansar ROM, flash it, but nothing change. I wonder if we can custom a rom and implement the extract file of USBModeswitch.xap to the rom. so that the phone will boot with usbmodeswitch installed in it, using this step, we're able to switch the mode from diag back to zune.
This the final technique might can help for now. For the ROM, i can only break/extract until I've got the 2 OS file:- 2_os.nb.extra (±2.4MB) and the other one is 2_os.nb.payload (±181MB). Ok, until then, I was stuck. if not... we can extract the XAP directly to the OS folder, then repacking back the ROM. the 2_os.nb.payload file was unable to extract to bin file. Error shown:- "no boot partition". Maybe I'm using the old WinMo tools to extract it.
ahhh.... gosh... stuck in this step. any help and guide will be much appreciated.
AzmanIshak said:
Yup that's true. I try to used ansar ROM, flash it, but nothing change. I wonder if we can custom a rom and implement the extract file of USBModeswitch.xap to the rom. so that the phone will boot with usbmodeswitch installed in it, using this step, we're able to switch the mode from diag back to zune.
This the final technique might can help for now. For the ROM, i can only break/extract until I've got the 2 OS file:- 2_os.nb.extra (±2.4MB) and the other one is 2_os.nb.payload (±181MB). Ok, until then, I was stuck. if not... we can extract the XAP directly to the OS folder, then repacking back the ROM. the 2_os.nb.payload file was unable to extract to bin file. Error shown:- "no boot partition". Maybe I'm using the old WinMo tools to extract it.
ahhh.... gosh... stuck in this step. any help and guide will be much appreciated.
Click to expand...
Click to collapse
Hi,
from your writing i can read that you have the needed knowledge to make this thing...
so how long do you think will it take to get the two files...
and if you get these files, how can we flash that ROM without HSPL or SSPL?
thanks for your answer ;-)
our problem is... there's still no kitchen for WP7 (temporary). So.. we have to wait Da_G or Ansar.Ath.Gr work. they might have some tools that can help us. I knew.. lot of our friend already stuck in this mode as well. So... there's no sync with zune for us... no music transfer via usb.. and we have to forget all the thing that we can do using the USB cable except for charging it. lol~ how sick...
yeah...
i can only listen to radio in the morning when i drive to school...
i hate the most of the breakfast-shows
i have another idea instead of waiting for an C-ROM...
but that is only possible with a clean, Chevron-Unlocked and USB-Switch installed WP7 phone...
so nothing personally...
and we need to wait for the update...
the whole clean system would be backed up and could be used for our WP7 devices to get the USBSwitch-App onto our phone (holding camera-key when starting to install backup)
would be great if there is anybody who makes it...
hi
ask the autor of this http://forum.xda-developers.com/showthread.php?t=922000
maybe he can help ,his tool use usbmodeswitch.
im active in his thread too, but he didn't answer at all...
I have actally done this myself sadly the only option I had was to sync all my contacts with Windowslive and reset the HD7 by holding both volume keys while powering it on from a cold boot.
AzmanIshak said:
This mode was accidentally entered when I'm trying to boot my htc hd7 and press camera button together with volume up (around 20sec while the phone booting). For your information, my htc hd7 having problem with zune application and my device manager recognize it as unknown devices (yellow exclamation mark).
It was caused when I've sideloading USBModeSwitch.xap and change from ZUNE to DIAG mode. After the phone restarting, the apps has been revoke then i've no chances to install the apps again to fix it back to ZUNE mode.
Now the phone can operate as usual but cannot recognize by zune (yellow exlamation mark in device manager in PC).
The good news is, the phone had recognized by pc when entering this mode. and the devices manager detect the phone under Portable Devices -> Schubert. Can we sideloading apps using this mode? If yes... it was a good news for those having the same problem with me. But the question is.. HOW.
Note: After the incident, I already flash the phone. but still unable to be detected by ZUNE Desktop in normal state. it can operate, can install from market place as usual but cannot sync with zune desktop. Can somebody help me on this? Sorry for my English. You may refer with my attachment for the images and the XAP application.
Note 2: Never try the USBModeSwitch.xap if your phone is not fully unlock or will facing the same problem with me. hope someone can fix this issue. because lot of friends are stuck in this doom.
Click to expand...
Click to collapse
can you tell me what rom was on the phone and what rom you flashed After you F*****up your phone ?
I want to know what Radio was on it , I think that tool does something with the radio rom on the phone , it could help the flash an older rom using a goldcard with an older radiorom in it.
edit:
maybe it is the spl , try to flash a rom with a lower/higher spl number.
ceesheim said:
can you tell me what rom was on the phone and what rom you flashed After you F*****up your phone ?
I want to know what Radio was on it , I think that tool does something with the radio rom on the phone , it could help the flash an older rom using a goldcard with an older radiorom in it.
edit:
maybe it is the spl , try to flash a rom with a lower/higher spl number.
Click to expand...
Click to collapse
Hi Ceesheim, thanks for reply. I'm not remember my preveous ROM, by the way
currently only RUU_Schubert_hTC_Asia_WWE_1.23.707.01_Radio_5.51.09.06a_22.30.50.09U_Signed_by_ansar that can be flash to my phone.
AzmanIshak said:
Hi Ceesheim, thanks for reply. I'm not remember my preveous ROM, by the way
currently only RUU_Schubert_hTC_Asia_WWE_1.23.707.01_Radio_5.51.09.06a_22.30.50.09U_Signed_by_ansar that can be flash to my phone.
Click to expand...
Click to collapse
thats a modded rom (don't use it)
try this one :
http://forum.xda-developers.com/showthread.php?t=853945
Hi
i think the best way to fix your problem is this rom.
http://forum.xda-developers.com/showthread.php?t=948497
this one contain developer tools & can help you with usb problem.
send me a pm after install it an maybe we can fix this.
xboxmod said:
Hi
i think the best way to fix your problem is this rom.
http://forum.xda-developers.com/showthread.php?t=948497
this one contain developer tools & can help you with usb problem.
send me a pm after install it an maybe we can fix this.
Click to expand...
Click to collapse
ok... will test it now. thanks!
I'll report to you after complete. thanks again~
xboxmod said:
Hi
i think the best way to fix your problem is this rom.
http://forum.xda-developers.com/showthread.php?t=948497
this one contain developer tools & can help you with usb problem.
send me a pm after install it an maybe we can fix this.
Click to expand...
Click to collapse
I already download and install to my PC. but cannot flash to my phone.
Currently the only ROM that my HD7 can flash is with this number: 1.23.707.01
Make a goldcard and then flash it
Sent from my HD7 T9292 using Board Express
(I posted this in the guide to installing s-off etc etc but yeah I don't know if anyone's going to pay it any mind there :S If I was wrong to create this, I'm sorry ><)
Hi,
I keep getting a Communication interrupted error. I don't know if anyone else had this problem and can help me? I'm a n00b with this s-off thing and I triple checked with like 4 different websites to make sure I'm going the right way with this.
Doing this on Windows, I got the HTC driver, removed anything that would sync the phone to the computer, everything going well up until this point:
Zerging Root... this may take a minute or so..
Sending in Caroline...
Cleaning up...
Rebooting to fastboot...
Whien life gives you lemons, don't make lemonade. Make life take back the lemons
Waiting for fastboot...
Rebooting to fastboot (again)...
Communications with phone unexpectedly interrupted. Try Again.
Press (almost) any key to exit.
What's wrong with it?
also:
I put on the USB Debugging, I turned off Fastboot, and yes, I checked - it is still S-ON *sad*
HTC Sensation 4G (pyramid-1.17.0008, Android: 2.3.3, ROM version: 1.29.531.2)
I have tried with the fastboot on as well
As for these troubleshooting methods, I've been through it over and over:
Revolutionary Hanging on "Method 3"
1. Make sure you have installed all the drivers from above.
2. Please Make Sure you have HTC Sync uninstalled and Droid Explorer uninstalled.
3. Install These Drivers HERE:
4. Basically anything and everything that will allow your phone or other phones to automatically connect or sync to your computer has to be uninstalled
5. Try another Computer or Factory Reset your device as a last resort.
I've tried 3 different computers (I have no access to anyone who has a Linux computer) I've factory resetted my phone twice + my SD card. I really don't know what else to do
I've tried it in Charge Mode, and HTC sync mode as well.
Can anyone help me? :S
you have to do it in charge mode, make sure fast boot is off, and here is the tricky part, ANY app that could sync with the fone, needs to be uninstalled.
for me Zune kept messing with the install cuz it kept trying to sync...
Also, make sure your HBOOT is compatible with the version of revo you are using
so try this:
1) uninstall itunes (and other apple device software), zune, and any htc software (plus the stock drivers)
2) reboot
3) clean the registry (regclean or something similar)
4) reboot
5) reinstall stock drivers then plug in the phone (charge only) and let the pc detect the hardware.
6) unplug the fone and reboot the pc
7) NOW try to S-OFF, should work, this is the process i had to take
Thanks, i tried everything you told me and it still won't work. I'm running out of ideas. Isn't there another method I could go through so I can just flash a custom rom. Lol...
if its unbranded, you can try the HTC method, but im not a fan of their approach to it...revo is much more user friendly in the long run...
also have you tried disconnecting all usb devices other than the keyboard, mouse and phone? also try doing a battery pull and leave it out for 10-15 seconds, and give it another shot
also, what ver of revo u using? the latest? and whats your hboot?
EDIT nm, saw your hboot etc in your first post long night at work
also, this may be a super stab in the dark, try another cable if you have one, just try to eliminate any possible issue
This exactly what I had with my Win7 tappy lappy. Its the "sucky usb stack".
Then I used a win xp 32 bit machine no problems.
DJW6927 said:
This exactly what I had with my Win7 tappy lappy. Its the "sucky usb stack".
Then I used a win xp 32 bit machine no problems.
Click to expand...
Click to collapse
yeah, apparently win7 is giving different users this problem, i used WinXP SP2 32bit with no issues
Yup. Definitely related to Win7 64 bit version for me. Although the user didn't report what version they were using.
It's also worth remembering that all USB ports aren't all the same.
I have to use the ports on the front of this particular 32 bit XP workstation for some operations and the ports on the back for other. Magldr for my HD2 never works on the front.....
Like Rev say in their FAQ... there's something about the USB stack on windows that sucks. Not surprising really when we're talking about interop between such dissimilar operating systems (Android vs MS Win). Its gonna be a headache sometimes.
I'm on Win 7 32 bit, when I tested Revolutionary my device wasn't detected at all.
Rebooted many times, installed drivers and did lots of things and still nothing.
I changed USB port, and it worked xD
Try different USB ports and another USB Cable in-case
Gd luck
Edit: Just found out that you tried 3 different computers... Sorry then, if I come up with anything I'll tell you
Edit 2: Can't he try it on Safe Mode? Maybe it would help?
safe mose wont work, the usb stack works even less at that point :/ go windows!
worst case scenario, get a liveCD of ubuntu and boot it from BIOS, thats the easiest alternative to trying on windows
Solidus_n313 said:
safe mose wont work, the usb stack works even less at that point :/ go windows!
worst case scenario, get a liveCD of ubuntu and boot it from BIOS, thats the easiest alternative to trying on windows
Click to expand...
Click to collapse
Wow
Way to go Microsoft xD
I'm having the exact same problem as with the poster of this thread. I've tried a fresh install of xp sp3 via vmware on my macbook pro. I've also installed Ubuntu but can't even get the revolutionary.exe file to open. Linux is too foreign for me, can anyone help me with that?
I had to use HTC sync mode in order for it to work on Windows 7 64 bit.
Sent from my HTC Sensation 4G using Tapatalk
Run it 3 times, each step completes as normal and it'll say it's done
Hi Nelliel.. I had this problem bt got it working all well.... Here uninstall all drivers of htc... Htc sysc etc etc.... No matter what advices what...simply install htc sync and keep the folder of downloaded drivers on desktop.. now start the flashing after reboot it will ask for driver of android fone..do not do anythng to fone bt go to device manager and select the htc device with yellow exclamation select uninstall device and scan for changes and intall the device manually by directing it to drivers folder u downloaded...it will immidiately execute fastboot commands bt fails on 3 rd reboot. Now reboot fone and flash again this time it will go straight no probs...I hv tried on 7 fones works wow...
Note : make sure u download not exe bt open drivers files availavle in development section....cheerz
Sent from my HTC Sensation Z710e using XDA Premium App
lalitsehgal21 said:
Hi Nelliel.. I had this problem bt got it working all well.... Here uninstall all drivers of htc... Htc sysc etc etc.... No matter what advices what...simply install htc sync and keep the folder of downloaded drivers on desktop.. now start the flashing after reboot it will ask for driver of android fone..do not do anythng to fone bt go to device manager and select the htc device with yellow exclamation select uninstall device and scan for changes and intall the device manually by directing it to drivers folder u downloaded...it will immidiately execute fastboot commands bt fails on 3 rd reboot. Now reboot fone and flash again this time it will go straight no probs...I hv tried on 7 fones works wow...
Note : make sure u download not exe bt open drivers files availavle in development section....cheerz
Click to expand...
Click to collapse
listen to this, his situation was WAYYYYY worst than yours, and he got his fone working perfectly and S-OFF'd
By flashing, I assume you do mean using the revolutionary program? I will try this process a little later and will post results. Thank you
i also had this problem when i wanted to set my sensa s-off. i run the tool several times and i always got this error message. So then i plugged of the phone, plugged it on again and then the tool says my phone is already s-off.
i boot the phone into bootloader and yes, the phone was s-off, on top is the revolutionary text and the bootloader version is 1.17.1111
hello can somebody help me with this problem? i try to connect my xperia z3 to my laptop and nothing happen, my device doesnt charging, no notification on my device, my laptop shows usb dont recognize, and read from previous forum, try to install the driver through device manager it shows "unknown usb device (port reset failed) and then i update the driver and the windows shows "windows has determine your software driver is up to date", i try factory reset xperia z3, reinstall my windows but it shows the same, then i try to install the driver through add legacy hardware in device manager, then install the driver, and it show "windows has stopped this device, this device couldn't start"
my os is marshmallow, and i have try using different cable and it doesnt work (
please someone help me to fix this (
Maybe try the solutions mentioned here:
https://www.drivereasy.com/knowledge/how-to-fix-unknown-usb-device-port-reset-failed-issue/
(the ones you didn't try already of course).
It seems to be a Windows 10 problem so try to check your device with another (preferably not Win 10) PC if you have access to one.
Omario-242 said:
Maybe try the solutions mentioned here:
https://www.drivereasy.com/knowledge/how-to-fix-unknown-usb-device-port-reset-failed-issue/
(the ones you didn't try already of course).
It seems to be a Windows 10 problem so try to check your device with another (preferably not Win 10) PC if you have access to one.
Click to expand...
Click to collapse
hei thank you, i have try your solution but it still doesnt work, i dont know what happen, the usb still says port reset failed, and i cant install xperia z3 driver manually, it says something like find 64xbit driver etc
is there any way to flash rom without connect to pc ? or how to root and install twrp in xperia z3 without pc so i can flash rom through twrp
Mccaggy said:
is there any way to flash rom without connect to pc ? or how to root and install twrp in xperia z3 without pc so i can flash rom through twrp
Click to expand...
Click to collapse
please somebody help me i have try everything, using diferrent usb cable, different pc, installing driver manually and etc but it still can connect to pc im doing this for a month and i really really stress now, because i need usb mtp to move my college data from phone to my laptop, i cant even charge my phone using usb port on my laptop the only thing i never try is flashing new rom, i just need to find way to root and install twrp without using pc so i can flash rom through twrp
Mccaggy said:
please somebody help me i have try everything, using diferrent usb cable, different pc, installing driver manually and etc but it still can connect to pc im doing this for a month and i really really stress now, because i need usb mtp to move my college data from phone to my laptop, i cant even charge my phone using usb port on my laptop the only thing i never try is flashing new rom, i just need to find way to root and install twrp without using pc so i can flash rom through twrp
Click to expand...
Click to collapse
Sry to hear but if it is a driver problem, the only solution would be to manually install the right drive package (64bit in your case probably). If you aren't to, you'd have to unlock bootloader to flash a rom etc which means losing your data.
BUT if you just want to get data from your phone why don't you upload it to something like Dropbox or Google Drive. Or for a direct push try Pushbullet (App for Android and program for Windows, set up with same account) and you can just send those files.
Omario-242 said:
Sry to hear but if it is a driver problem, the only solution would be to manually install the right drive package (64bit in your case probably). If you aren't to, you'd have to unlock bootloader to flash a rom etc which means losing your data.
BUT if you just want to get data from your phone why don't you upload it to something like Dropbox or Google Drive. Or for a direct push try Pushbullet (App for Android and program for Windows, set up with same account) and you can just send those files.
Click to expand...
Click to collapse
Thanks before, can you give me link for driver Xperia z3 64bit? I cant unlock bootloader if my device isn't detected by computer not for data only, i need charge from laptop if in emergency situations
I did it like 3 years ago so don't know if those links are still working but I did it with those two guides (one is German though):
https://www.randombrick.de/sony-xperia-z3-fastboot-unter-windows-mit-den-richtigen-treibern/
For the manual installations of the driver:
https://android.stackexchange.com/questions/129174/windows-10-fastboot-driver
Direct link to fastboot driver:
http://developer.sonymobile.com/downloads/drivers/fastboot-driver/
Hope this helps.
EDIT: You can also try with the driver installation with flash tool, but you have to disable the windows signature verification check (google, there's loads of tutorials).