Database Info

how can i make it work again

i flashed from SD my eten X650 with the original rom from X500 by a mistake.
is there someone to help me solve this problem.
it can boot now from sd.
BUT
if i press(camera+power+reset0buttons my pc recognize it likeMICROSOFT USB SYNC devise but it can conected with microsoft active sync
please help me and ican pay someone if he make it work again with 50€

bear79 said:
i flashed from SD my eten X650 with the original rom from X500 by a mistake.
is there someone to help me solve this problem.
it can boot now from sd.
BUT
if i press(camera+power+reset0buttons my pc recognize it likeMICROSOFT USB SYNC devise but it can conected with microsoft active sync
please help me and ican pay someone if he make it work again with 50€
Click to expand...
Click to collapse
Just flash it with the rom for the X650 and you'll be back to your old self. The fact that it can still boot is a good thing since apparently you did not brick the device.

when i try too boot my X650 my screen becomes white and nothing hepens.
then i connect it with pc and recognize it.
i thing that i can flash it.
any other solution?
thanks

Flash from your pc then if your pc recognizes it. By pressing camera+power+reset0buttons i'm guessing you are talking about the bootloader.

yes.for bootloader menu i am saing.
how i can boot it from pc?

if you are stuck in bootloader, then your pc will not recgonise the devise for activesync (or for the RUU software), i think you have to use mtty

i think thay mtty is only for HTC or i am wrong?

This is exactly why we are always telling people to read before doing these things, so that they do not mess up their devices.
Anyway, get your device in bootloader mode and connect it to the PC. You must kill Active Sync (I am assuming that you are using Windows XP and not Vista). In order to kill ActiveSync, you must open the Task Manager and kill the processes called rapimgr.exe and wcescomm.exe.
Once you've done that, you must run the upgrade/rom upgrade utility program in your computer and follow the instructions on the screen. [highlight]Please make sure that the rom that you are using is specific for your device.[/highlight] Otherwise, you will brick your device for certain...
Note that upgrade instructions are, under most cases, device specific. Make sure that you follow the instructions in your upgrade precisely. Most rom cooks post either Readme.txt files along with their roms or they post very precise instructions in the forums. What I just gave you here is a very general set of instructions that normally work for most devices. I do not have an Eten (never have), so I am uncertain if these instructions will be useful to you. Follow them under your own discretion. [highlight]I am not responsible for any damage to your device.[/highlight]
Good luck...

it ask me again to connect wiyh active sync

Ignore. was moved

HELP mE please

soo no solution has found

bear79 said:
soo no solution has found
Click to expand...
Click to collapse
Just read my post. If the device is in bootloader, it should not try to connect to activesync, the pc should only see a USB device. Look for a rom upgrade for your phone and look at the upgrade instructions and follow them exactly. Your phone is not bricked, it only needs to be re-flashed.

i have tried that but nothing heppens.
when i try too put it in bootloader menu my sreen becomes white.
is this bricked phone?

Yes if you cannot get into your bootlaoder, it is bricked.

i may have bricked my phone please help

i cant believe i did this but i have a sprint tp2 and i accidentally install the wrong rom, i installed 1.8b_Sense_2.5_2012_Full, and after the update the phone wont turn on so i cant even do the bootloader. and hard reset either, nothing is responding. is there any way i can get out of this with a working phone?? would the people at sprint be able to help? and please no smart ass comments im really bummed out about this right now

It should be ok if you only install a gsm rom. If you installed a gsm unlocker than it is bricked. Just push the bootloader buttons with the phone off. If it doesn't go to bootloader it is bricked.

i installed the rom but i think the damn thing CAME with the radio unlocker inside the rom. i cant get into bootloader...

please help

If you can't get into bootloader and it wont turn on it is bricked.

Not to hijack the thread, but on the subject of bricking the phone...
I tried to install Hard SPL using SSPL Manual (downloaded from a link on ppcgeeks.com). I ran it from the phone, and the screen blanked as normal, but no USB device was detected after doing so and the manual Hard SPL would not work either.
I tried to reset and remove the battery. The phone will not turn on, will not enter boot loader mode, nothing! EXCEPT for one thing, when I plug in USB now, it is detected as a Qualcomm CDMA Technologies MSM. No driver though (Win 7 or Win XP).
Is there any way to recover from this?

Hi!
Download and install this:
_ftp://up.ppcgeeks.com/Touch%20Pro%202/Stock%20ROMs/RUU_Rhodium_W_Sprint_WWE_1.21.651.3_RS_1.96WF_NV_SPCS_1.42_0430_PRL60652_Ship.exe
I think it help you.

ted2001 said:
Hi!
Download and install this:
_ftp://up.ppcgeeks.com/Touch%20Pro%202/Stock%20ROMs/RUU_Rhodium_W_Sprint_WWE_1.21.651.3_RS_1.96WF_NV_SPCS_1.42_0430_PRL60652_Ship.exe
I think it help you.
Click to expand...
Click to collapse
Hi, I have the exact same issue as the member above. I tryed to go to the ftp site you reccomended, but can't download. Can you please help! I cant sleep or think of anything else. Can't believe I did that to my phone.

go here and then to touch pro 2 stock roms. ftp://up.ppcgeeks.com/

Thanks for the replies.
I can't load the stock ROM since the phone is not recognized by ActiveSync. While you can see it when you connect USB, it isn't actually usuable as there is no driver loaded for it. And many drivers I've tried for it do not work either.
I did try [to install the ROM] though just to make sure there was no magic going on behind the scenes, but no go.
EDIT: Grammer fix

[Q]S-Off failing to communicate with phone?

(I posted this in the guide to installing s-off etc etc but yeah I don't know if anyone's going to pay it any mind there :S If I was wrong to create this, I'm sorry ><)
Hi,
I keep getting a Communication interrupted error. I don't know if anyone else had this problem and can help me? I'm a n00b with this s-off thing and I triple checked with like 4 different websites to make sure I'm going the right way with this.
Doing this on Windows, I got the HTC driver, removed anything that would sync the phone to the computer, everything going well up until this point:
Zerging Root... this may take a minute or so..
Sending in Caroline...
Cleaning up...
Rebooting to fastboot...
Whien life gives you lemons, don't make lemonade. Make life take back the lemons
Waiting for fastboot...
Rebooting to fastboot (again)...
Communications with phone unexpectedly interrupted. Try Again.
Press (almost) any key to exit.
What's wrong with it?
also:
I put on the USB Debugging, I turned off Fastboot, and yes, I checked - it is still S-ON *sad*
HTC Sensation 4G (pyramid-1.17.0008, Android: 2.3.3, ROM version: 1.29.531.2)
I have tried with the fastboot on as well
As for these troubleshooting methods, I've been through it over and over:
Revolutionary Hanging on "Method 3"
1. Make sure you have installed all the drivers from above.
2. Please Make Sure you have HTC Sync uninstalled and Droid Explorer uninstalled.
3. Install These Drivers HERE:
4. Basically anything and everything that will allow your phone or other phones to automatically connect or sync to your computer has to be uninstalled
5. Try another Computer or Factory Reset your device as a last resort.
I've tried 3 different computers (I have no access to anyone who has a Linux computer) I've factory resetted my phone twice + my SD card. I really don't know what else to do
I've tried it in Charge Mode, and HTC sync mode as well.
Can anyone help me? :S

you have to do it in charge mode, make sure fast boot is off, and here is the tricky part, ANY app that could sync with the fone, needs to be uninstalled.
for me Zune kept messing with the install cuz it kept trying to sync...
Also, make sure your HBOOT is compatible with the version of revo you are using
so try this:
1) uninstall itunes (and other apple device software), zune, and any htc software (plus the stock drivers)
2) reboot
3) clean the registry (regclean or something similar)
4) reboot
5) reinstall stock drivers then plug in the phone (charge only) and let the pc detect the hardware.
6) unplug the fone and reboot the pc
7) NOW try to S-OFF, should work, this is the process i had to take

Thanks, i tried everything you told me and it still won't work. I'm running out of ideas. Isn't there another method I could go through so I can just flash a custom rom. Lol...

if its unbranded, you can try the HTC method, but im not a fan of their approach to it...revo is much more user friendly in the long run...
also have you tried disconnecting all usb devices other than the keyboard, mouse and phone? also try doing a battery pull and leave it out for 10-15 seconds, and give it another shot
also, what ver of revo u using? the latest? and whats your hboot?
EDIT nm, saw your hboot etc in your first post long night at work

also, this may be a super stab in the dark, try another cable if you have one, just try to eliminate any possible issue

This exactly what I had with my Win7 tappy lappy. Its the "sucky usb stack".
Then I used a win xp 32 bit machine no problems.

DJW6927 said:
This exactly what I had with my Win7 tappy lappy. Its the "sucky usb stack".
Then I used a win xp 32 bit machine no problems.
Click to expand...
Click to collapse
yeah, apparently win7 is giving different users this problem, i used WinXP SP2 32bit with no issues

Yup. Definitely related to Win7 64 bit version for me. Although the user didn't report what version they were using.
It's also worth remembering that all USB ports aren't all the same.
I have to use the ports on the front of this particular 32 bit XP workstation for some operations and the ports on the back for other. Magldr for my HD2 never works on the front.....
Like Rev say in their FAQ... there's something about the USB stack on windows that sucks. Not surprising really when we're talking about interop between such dissimilar operating systems (Android vs MS Win). Its gonna be a headache sometimes.

I'm on Win 7 32 bit, when I tested Revolutionary my device wasn't detected at all.
Rebooted many times, installed drivers and did lots of things and still nothing.
I changed USB port, and it worked xD
Try different USB ports and another USB Cable in-case
Gd luck
Edit: Just found out that you tried 3 different computers... Sorry then, if I come up with anything I'll tell you
Edit 2: Can't he try it on Safe Mode? Maybe it would help?

safe mose wont work, the usb stack works even less at that point :/ go windows!
worst case scenario, get a liveCD of ubuntu and boot it from BIOS, thats the easiest alternative to trying on windows

Solidus_n313 said:
safe mose wont work, the usb stack works even less at that point :/ go windows!
worst case scenario, get a liveCD of ubuntu and boot it from BIOS, thats the easiest alternative to trying on windows
Click to expand...
Click to collapse
Wow
Way to go Microsoft xD

I'm having the exact same problem as with the poster of this thread. I've tried a fresh install of xp sp3 via vmware on my macbook pro. I've also installed Ubuntu but can't even get the revolutionary.exe file to open. Linux is too foreign for me, can anyone help me with that?

I had to use HTC sync mode in order for it to work on Windows 7 64 bit.
Sent from my HTC Sensation 4G using Tapatalk

Run it 3 times, each step completes as normal and it'll say it's done

Hi Nelliel.. I had this problem bt got it working all well.... Here uninstall all drivers of htc... Htc sysc etc etc.... No matter what advices what...simply install htc sync and keep the folder of downloaded drivers on desktop.. now start the flashing after reboot it will ask for driver of android fone..do not do anythng to fone bt go to device manager and select the htc device with yellow exclamation select uninstall device and scan for changes and intall the device manually by directing it to drivers folder u downloaded...it will immidiately execute fastboot commands bt fails on 3 rd reboot. Now reboot fone and flash again this time it will go straight no probs...I hv tried on 7 fones works wow...
Note : make sure u download not exe bt open drivers files availavle in development section....cheerz
Sent from my HTC Sensation Z710e using XDA Premium App

lalitsehgal21 said:
Hi Nelliel.. I had this problem bt got it working all well.... Here uninstall all drivers of htc... Htc sysc etc etc.... No matter what advices what...simply install htc sync and keep the folder of downloaded drivers on desktop.. now start the flashing after reboot it will ask for driver of android fone..do not do anythng to fone bt go to device manager and select the htc device with yellow exclamation select uninstall device and scan for changes and intall the device manually by directing it to drivers folder u downloaded...it will immidiately execute fastboot commands bt fails on 3 rd reboot. Now reboot fone and flash again this time it will go straight no probs...I hv tried on 7 fones works wow...
Note : make sure u download not exe bt open drivers files availavle in development section....cheerz
Click to expand...
Click to collapse
listen to this, his situation was WAYYYYY worst than yours, and he got his fone working perfectly and S-OFF'd

By flashing, I assume you do mean using the revolutionary program? I will try this process a little later and will post results. Thank you

i also had this problem when i wanted to set my sensa s-off. i run the tool several times and i always got this error message. So then i plugged of the phone, plugged it on again and then the tool says my phone is already s-off.
i boot the phone into bootloader and yes, the phone was s-off, on top is the revolutionary text and the bootloader version is 1.17.1111

Help me get out of this situation, Pls help me if u know how to get out of this probl

I've sensation Xe which has problem. This device was given me as a gift from one of my friend.
The main problem with this device is pc doesnot recognize it. I've tried with 3 pcs, different cables, factory reset,
changed micro sd card, checked the device in usb mode, checked ask me before connecting device etc, i mean every possible
solutions out there.. My main concentration is even when i try new pc there is no response from pc like any sound or like
installing driver for pc.
The device charges through usb. I've installed latest htc sync for my device.
I've heard about usb bricking but i don't know whether it is related to my problem,. Every thing ,except connection with pc , is
working fine.
And other thing is my phone is s-on, unrooted, locked bootloader, lates ics 4.0.3, 1.27.00, stock recovery.
My phone is never rooted or unlocked , so my guess is my friend updated to ics through ota.
Now beside solution to above related problem , it'll be kind if anyone help me with a guide to
flash custom rom, it may help to sort my problem. Pls remember to flash custom rom
i need to do something before like unlock bootloader s-off etc. As usb is not working in my device, so i think
flashing custom rom in my situation is little difficult. please help me to get ot of this problem.
Sorry for my bad englist as english is not my mother tounge.

You could always put the sdcard into a card reader or another phone, copy the files across then apply the update? Could be a corrupt MISC partition (IIRC) this used to happen on the Legend.
To apply an update you would have to extract rom.zip from a RUU. To do this you need to download a RUU and run it (with no phone connected) open task manager on windows (CTRL+SHIFT+ESC) look out for ARUwizard.exe, go through the RUU clicking next untill the ARUwizard pops up then right click it, choose open file location and scroll down to ROM.zip copy this file to desktop. Rename it to PG58IMG.zip make sure its not PG58IMG.zip.zip as that wont work. Copy to sdcard then turn phone on using power and volume down, it will scan the sdcard (hopefully) find the file and start updating. A reflash could well repair the problem

zimage20 said:
I've sensation Xe which has problem. This device was given me as a gift from one of my friend.
The main problem with this device is pc doesnot recognize it. I've tried with 3 pcs, different cables, factory reset,
changed micro sd card, checked the device in usb mode, checked ask me before connecting device etc, i mean every possible
solutions out there.. My main concentration is even when i try new pc there is no response from pc like any sound or like
installing driver for pc.
The device charges through usb. I've installed latest htc sync for my device.
I've heard about usb bricking but i don't know whether it is related to my problem,. Every thing ,except connection with pc , is
working fine.
And other thing is my phone is s-on, unrooted, locked bootloader, lates ics 4.0.3, 1.27.00, stock recovery.
My phone is never rooted or unlocked , so my guess is my friend updated to ics through ota.
Now beside solution to above related problem , it'll be kind if anyone help me with a guide to
flash custom rom, it may help to sort my problem. Pls remember to flash custom rom
i need to do something before like unlock bootloader s-off etc. As usb is not working in my device, so i think
flashing custom rom in my situation is little difficult. please help me to get ot of this problem.
Sorry for my bad englist as english is not my mother tounge.
Click to expand...
Click to collapse
Hi,
You can flash custom ROM with s-on.
Look HERE
Try installing THESE DRIVERS then see if your pc recognizes your phone.
Check my signature for many links to s-offing ,if you want to go that way.

bonesy said:
You could always put the sdcard into a card reader or another phone, copy the files across then apply the update? Could be a corrupt MISC partition (IIRC) this used to happen on the Legend.
To apply an update you would have to extract rom.zip from a RUU. To do this you need to download a RUU and run it (with no phone connected) open task manager on windows (CTRL+SHIFT+ESC) look out for ARUwizard.exe, go through the RUU clicking next untill the ARUwizard pops up then right click it, choose open file location and scroll down to ROM.zip copy this file to desktop. Rename it to PG58IMG.zip make sure its not PG58IMG.zip.zip as that wont work. Copy to sdcard then turn phone on using power and volume down, it will scan the sdcard (hopefully) find the file and start updating. A reflash could well repair the problem
Click to expand...
Click to collapse
Thank u genius xda member , u saved my life , now my mobile is detected by computer.

Sweet glad to be of help
One other thing... On the how to flash with S-ON that was posted....
Requirements:
Your phone
USB Connector
Backup of your phone's conent
A brain
Click to expand...
Click to collapse
USB wasn't working so it couldn't have been done

Calling all experts!! Think I've killed it........?

I have a recent thread ' A real amateur'
But I have started a new one as I have delved deeper into the depths of a dead phone
This is a slight continuation from the previous thread but what I've done now is more worrying.
I had wanted to put pie os on phone, updated twrp the wrong way and wouldn't go into recovery.
Tried to use guides on fastboot and I have had no luck at all with it. Tried SDK downloads and my pc wouldn't run the files( winrar and 7zip didn't show .exe files, just 'emulators'. Even right clicked to run as administrator but still, no luck.
Pc wouldn't recognise my phone also, even turning debugging mode on and alsorts.
So I thought i could run factory reset..? And as you'd of guessed, I have TOTALLY wiped the lot so there's no OS (was using resurrection remix) and now I can't turn phone on and no recovery and the only option available for the phone is fastboot but my pc won't recognise the device, nor can I get SDK, ADB or fastboot to work on my phone.
Have I completely killed my phone now???
I hope not and thank you in advance for the tremendous amount of help in advance and previously.
Someone help me

Hi
Have you tried this? it detects and installs a new rom by scaning the com ports, worked for me in the past.
https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732

ricardopt78 said:
Hi
Have you tried this? it detects and installs a new rom by scaning the com ports, worked for me in the past.
https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
Hi ricardopt78.
No I haven't tried this as I never knew about it but I will give it a go and let you guys know how I get on.
Thank you very much!! ?