Related
Hi
My Uni is dead, dont enter in bootloader mode, dont upgrade, dont do nothing.
Please help me, i dont know what happen.
You have to give us more clue. What were you doing with the Universal before this happened? Were you in the process of upgrading, downloading, etc...?
cktlcmd said:
You have to give us more clue. What were you doing with the Universal before this happened? Were you in the process of upgrading, downloading, etc...?
Click to expand...
Click to collapse
I upgrade with Vista. Dont work nothing.
Solution..
Hey i had the same problem... the Screen will say Serial no. and at the bottom it will say V. 1.01
Just do one thing.... connect yr fone to a desktop with Xp and then try running the upgrader... make sure u have the Sync software with u.....
I know this because the same thing happened with me.. my fone was dead.. till i did this..
try it
danidabest said:
Hey i had the same problem... the Screen will say Serial no. and at the bottom it will say V. 1.01
Just do one thing.... connect yr fone to a desktop with Xp and then try running the upgrader... make sure u have the Sync software with u.....
I know this because the same thing happened with me.. my fone was dead.. till i did this..
try it
Click to expand...
Click to collapse
My problem is the screen dont have nothing, any letters ou numbers.
having constantly the 150 connection error message
hellonasty said:
My problem is the screen dont have nothing, any letters ou numbers.
having constantly the 150 connection error message
Click to expand...
Click to collapse
Have you tried the suggestion at least?
Look for the original ROM of your device and find a WINDOWS XP computer and try to reflash with those 2 as suggested from above.
i want Try Mamaich Method but dont recognize the usb port.
Do you know?
Thanks
hellonasty said:
i want Try Mamaich Method but dont recognize the usb port.
Do you know?
Thanks
Click to expand...
Click to collapse
I don't think it would work. The Mamaich method is for a different problem. Yours clearly is due to Windows Vista incompatibility. I had read a couple of this type of thread in the past and the only solution was already given to you.
do you know where is the original rom?
hellonasty said:
do you know where is the original rom?
Click to expand...
Click to collapse
What type of Universal do you have? TMobile, O2, IMate...etc?
Sorry
I have a qtek9000
Before I tried my 1st upgrade I download the official ROM just in case.
I thought I had it but I can't find it. I have one copy on the PC at work, but I will only return there next Wednesday, so no big help.
I remember see a post were a member informed that he had an ftp with all the ROMS. Maybe some one remember the address. If I get, it i will post it.
Cheers.
Here: http://forum.xda-developers.com/showthread.php?t=296651&highlight=official+qtek+rom
Take a look into this thread at POST #7 by nvatvani
---
cktlcmd said:
Here: ftp://ftp.xda-developers.com/Universal/Uni_AKU2_WWE/QTEK_9000/
---
Click to expand...
Click to collapse
Am I wrong or those are the files that have been deleted because M$ "request"?
ultravox said:
Am I wrong or those are the files that have been deleted because M$ "request"?
Click to expand...
Click to collapse
OOOOPPPPs. that was the wrong dead link. But I corrected it already.
dead xda
i was trying to upgrade rom downloaded from o2 for my xda 2i i have same problem as previous guy i have tried to load from windows xp machine but get connection error 101 my screen is blank apart from usb and v1.01 can anyone help?
sounds to me like it might be as simple as a dead battery.
1. what happens when you try to charge it with the wall charger?
2. have you tried switching batteries?
3. you still haven't said what you were doing with the device before this happend
4. this is totally unrelated to WM6 Forum, you shouldn't have posted this here
when you put your universal on usb with a pc on xp there is a detection? or not and are you sur that there isn t any write on the screen .
because i have the same pb in 2006 an ithink that my universal is dead an aftrer 2 day i put the universal on the light and i see v101 if you don t see to the light you don t see it because the backlight don t work.
in this case the led for the charging don t work to.
if you have this there is a solution with a free operator rom i think it s on my pc.if you need tell me
sudf said:
when you put your universal on usb with a pc on xp there is a detection? or not and are you sur that there isn t any write on the screen .
because i have the same pb in 2006 an ithink that my universal is dead an aftrer 2 day i put the universal on the light and i see v101 if you don t see to the light you don t see it because the backlight don t work.
in this case the led for the charging don t work to.
if you have this there is a solution with a free operator rom i think it s on my pc.if you need tell me
Click to expand...
Click to collapse
Thanks
It do not enter boot loader with light + power + reset and show no signs of life.
The light is off.when i push reset button flash the red light.
When connected to USB, PC reports "USB device not recognised"
I want a original rom for qtek9000 for test.
Anybody have this rom?
When I bricked my XDA Exec by means of hung program during the upgrade, I had: no reaction to normal Reset, no entry to Bootloader - basically a brick.
I did LeftSoftKey + RightSoftKey + Reset to do a *hard* reset (everything was lost anyway), and after that I could see "Serial... v1.01" Bootloader notification. When you connected that to a computer, it changed to "USB... v1.01" prompt.
So I just took JWright's image, and re-flashed it.
Guess what? It detected I had no image/extRom/RadioRom whatsoever then offered to re-flash them. I knew I'm OK when Radio upgrade progress indicator started to move.
It took me to get to another machine first, however. My Vista machine totally screwed up things, whereas my home XP managed to do the job.
Sitting on JWright's 2.02.02 now - very thoroughly made ROM, love Voice Command integrated with it instead of crappy Cyberon's software.
Guys
Im trying to update my C600 to the wm6 rom,
Ive unlocked (SuperCID) my phone, app unlocked as well. However when I try run TTP it comes up saying cannot connect followed by several other characters.
Im using a XP laptop nd have followed the instructions on the thread.
One other thing is that whenever I try run a ROM update official or unofficial Windows says that romupdateutility.exe is not responding...... and closes.
Ive tried doing a hardreset but still no joy
Please help!!!
thanks
Simon
after opening TTP are you selecting Serial and then USB from the drop down list??
ok.. make sure u r in bootloader mode and not in phone mode.
hold the camra key when the phone is off then plug in the usb cable
thanks guys
but yep definitley in bootloader mode and definitaly selecting usb coonection!
any other ideas?
I wonder if my phones got somethng wrong as i cant even install the official Orange Rom? even my phone works perfectly
Thanks
Si
oh.... r u using vista????
try updating the drivers!!! read the vista thred in the first post... that might help you
Well ive tried Vista nd Xp, I too have just read the Vista thread and downloaded the drivers
tried flashing again, PC rebooted at 20% One bricked C600
luckily its a corporate phone so will retry when I get my new one - lol
Hi Help me pls,
I've tried to flash my rom via ActiveSync. Every thing went well until i get the progress bar then it got stuck at 0% for ages so i disconnect the whole thing and tried to restart the process.
NOW I CAN'T ACTIVESYNC ANYMORE !!!! but the connection as "memory card reader" still working.
I went through all the post and tried to flash the ROM via bootloader with the "RAPHIMG.nbh" in my SD card ( already formated FAT32 ) but every time the PDA got stuck at the first stage "loading".
HELP ME PLEASE
I have similar problem, can't connect to PC anymore, but flashing with SD card works for me
have you tried different ROM images?
TQY said:
Hi Help me pls,
I've tried to flash my rom via ActiveSync. Every thing went well until i get the progress bar then it got stuck at 0% for ages so i disconnect the whole thing and tried to restart the process.
NOW I CAN'T ACTIVESYNC ANYMORE !!!! but the connection as "memory card reader" still working.
I went through all the post and tried to flash the ROM via bootloader with the "RAPHIMG.nbh" in my SD card ( already formated FAT32 ) but every time the PDA got stuck at the first stage "loading".
HELP ME PLEASE
Click to expand...
Click to collapse
It sounds like you did not carefully read this.
That is also where this should have been posted. A new thread should not be started for this type of issue. I understand you are panicing. However, in almost all situations the phone can be recovered.
That said, Hold volume down and hit the reset button. It will put you in the tricolor screen. In the white it says serial. Connect it to your usb cord. It should now say usb. Now flash the STOCK rom.
be sure that battery over 50% then follow arupphental's
I have a friend with a kaiser and the same problem. can this be applied to it? i dont want to search through the forum forever...
I would start by going to the kaiser forums and checking the stickies. Search within the kaiser forum also works.
I have This problem on Vista OS, i connect my touch pro after reboot system, and if i disconnect device and try again connect, my system not see device!
On device manager in OS, my touch pro stay present after disconnect device. This problem retry if after connect i try flash rom on device, black screen on and flashing stop with error connect to device.
Please Help!!!!!
P.S. Sorry my Bad English
X2D said:
I would start by going to the kaiser forums and checking the stickies. Search within the kaiser forum also works.
Click to expand...
Click to collapse
ok i thought someone would say that. was just wondering off hand. thanks x2d
A.creature said:
I have This problem on Vista OS, i connect my touch pro after reboot system, and if i disconnect device and try again connect, my system not see device!
On device manager in OS, my touch pro stay present after disconnect device. This problem retry if after connect i try flash rom on device, black screen on and flashing stop with error connect to device.
Please Help!!!!!
P.S. Sorry my Bad English
Click to expand...
Click to collapse
go to bootloader (tricolor on screen)& flash a rom, your PPC 'll be fine. when you flash ROM, PC transfer data through USB to PPC therefor not need connect by activesync.
I had the same problem after a faulty ROM from Vodafone NL, what I had to do is before I wanted to flash my ROM do a hard reset on my device (please back-up your personal data before doing this). After the hard reset, I could get a stable connection with activesync and flash my ROM
While the circumstances are different, my advice is still the same: http://forum.xda-developers.com/showthread.php?t=481527
longnguyen30 said:
go to bootloader (tricolor on screen)& flash a rom, your PPC 'll be fine. when you flash ROM, PC transfer data through USB to PPC therefor not need connect by activesync.
Click to expand...
Click to collapse
Stumbled upon this.. and yes the advise is good, when you run the flashing utility (i.e. CustomRUU.exe), it says you need an Active Sync connection, but you really dont, you can flash it anyway, it seems to find the device via USB regardless.
ufff!!!! to me yes found right, thank you thank you to first post. (flashing from SD)
Undetected
Well i had the problem where my phone wasnt getting detected at all.... i put the stock rom and radio but couldnt put stock spl on the phone with sdcard.... after trying different computers/usb wires/settings i returned it for a new one and this one works fine.
Hello guys!
I've got a bit of a problem here, because now my mobile refuses to connect with activesync and therefore making it impossible to flash it.
I read the readme in the cid bypass folder, and didn't quite understand it, but as keen as I was on getting a new rom I did it all wrong.
I actually copied the cid bypass folder to my sd-card and ran haret.exe from the phone. A friendly penguin appeared along with some green text, and it rebooted and went black. I waited for a while, but had no patience so I rebooted it again. But after this it has been impossible to connect it with activesync! I've tried hard reset and different computers but nothing works!
I'm hoping someone on this forum can help me!
best regards
Try this.
turn your phone off and press the camera button in then plug it into the USB port
you should get a multi color screen. If you do then you can flash.
But go here http://forum.xda-developers.com/showthread.php?t=330909
Go to where it says EDIT and follow what it says.
Oh and when a dos box opens up and ask you things just press the return key each time.
good luck
hey man, I tried reflashing the original rom to my vox, with the manualstyle sd card flash. So now it's flashed with the original rom, but still activesync doesn't work! anybody have an idea on how to make this right?
somebody tried running haret.exe from their phone, then flashing the Uspl with ruu flasher and then flash the new cooked rom?
My phone is not able to connect for flashing while in black state (after running harET), is it stupid of me to reboot it and start it by holding camera button while plugging it in to the computer? and then flash it with the ruu?
somebody please help me?
go into settings then connections then more till you see USB to PC
in there un-tick the box which says enable advaned network.
zipuz said:
somebody tried running haret.exe from their phone, then flashing the Uspl with ruu flasher and then flash the new cooked rom?
My phone is not able to connect for flashing while in black state (after running harET), is it stupid of me to reboot it and start it by holding camera button while plugging it in to the computer? and then flash it with the ruu?
somebody please help me?
Click to expand...
Click to collapse
I am confused..is it working or not? one post you say it is but you cant sink..then you say its not.????
and dont use the flash off the mem stick..use windows..
ok, sorry for making confusing posts! I'm just excited about getting it to work.
So here's the situation:
From stock phone used with exchange (turned off the exchange part before doing anything)
1. I ran haret.exe from my phone, and it rebooted into a "black state" after which I rebooted it again
2. I tried to connect it to my computer using activesync, to be able to flash, but it wouldn't connect. Activesync doesn't respond to my phone.
3. I flashed the shipped rom to my phone from my sd-card in good hope that it would reset the whole process, but it still won't connect to activesync.
So here's my problem; I want to flash a cooked rom to my phone, but I'm unable to connect it to my computer via activesync, what to do?
deuse said:
go into settings then connections then more till you see USB to PC
in there un-tick the box which says enable advaned network.
Click to expand...
Click to collapse
tried with both ticked and unticked, still nothing
Turn off your phone then keep the camera button pressed in at the same time plug it into the usb port
your should show diff colors on the screen..if so follow what it says in this link.
http://forum.xda-developers.com/showthread.php?t=330909
and do it from the pc not your mobile...
it's restored, but no activesync still
Is the cable you are using ok? or is it a new one you just got.
does windows see it when you plug it in? if so un-install active sync then reinstall it.
I'm having the same issue with Windows Mobile 6.5 ROM, activesync simply doesn't work ;/
ivanek666 said:
I'm having the same issue with Windows Mobile 6.5 ROM, activesync simply doesn't work ;/
Click to expand...
Click to collapse
Have you been into settings and un-ticked the box in USB to PC?
Also if you are trying to sync to office you must create a new partnership
google is your best friend.
I have no problems with sync in XP/Vista?windows 7 and office 2007
I am using FMs 1.1 WM 1.1
deuse said:
Is the cable you are using ok? or is it a new one you just got.
does windows see it when you plug it in? if so un-install active sync then reinstall it.
Click to expand...
Click to collapse
Windows notices my mobile (installs new drivers), but activesync doesn't register the device.
zipuz said:
Windows notices my mobile (installs new drivers), but activesync doesn't register the device.
Click to expand...
Click to collapse
Do the Hard reset .Then connect it to your machine.I hope this time it will work smoothly.
zipuz said:
Windows notices my mobile (installs new drivers), but activesync doesn't register the device.
Click to expand...
Click to collapse
Try this
open sync then at the top chose files then click on DELETE MOBILE DEVICE
see what happens..but post back if you fix it to help other people
yogusmilu said:
Do the Hard reset .Then connect it to your machine.I hope this time it will work smoothly.
Click to expand...
Click to collapse
I failed to mention that I've tried the hard reset as well, no luck.
I thought about the same thing Deuse, but there's no mobile device registered, so I'm not able to delete it.
It seems that you have tried every possible method! Anyway, my suggestion is install activesync in some other PC (friend's) and connect your phone there. See if it registers the phone. If it does then it is problem with the PC and not with phone. In that case, connect phone to PC and open controlpanel>System (icon)>Hardware tab>Device Manager Button in your PC. Unfold Network adapters and see if your phone is detected properly or it is detected with an "!" mark in "Unknown/Other device". If so, delete the device and disconnect phone. Reboot PC, reboot phone connect again and let the PC reinstall your device and see if it recognises your phone.
One more way (I think you might have tried this)- Uninstall Activesync and reinstall and connect phone.
By the way if your phone is not recognised in some other PC then it seems trouble with the phone.
Thanks.
Looks like your cable is faulty. Try activesync connection through bluetooth (for testing, ofcourse you cant flash from bt ).
parthabhatta said:
It seems that you have tried every possible method! Anyway, my suggestion is install activesync in some other PC (friend's) and connect your phone there. See if it registers the phone. If it does then it is problem with the PC and not with phone. In that case, connect phone to PC and open controlpanel>System (icon)>Hardware tab>Device Manager Button in your PC. Unfold Network adapters and see if your phone is detected properly or it is detected with an "!" mark in "Unknown/Other device". If so, delete the device and disconnect phone. Reboot PC, reboot phone connect again and let the PC reinstall your device and see if it recognises your phone.
One more way (I think you might have tried this)- Uninstall Activesync and reinstall and connect phone.
By the way if your phone is not recognised in some other PC then it seems trouble with the phone.
Thanks.
Click to expand...
Click to collapse
It's marked with an "!", will try it on my own pc next time I have it, worked there last time! if not, I'll have to live with
This mode was accidentally entered when I'm trying to boot my htc hd7 and press camera button together with volume up (around 20sec while the phone booting). For your information, my htc hd7 having problem with zune application and my device manager recognize it as unknown devices (yellow exclamation mark).
It was caused when I've sideloading USBModeSwitch.xap and change from ZUNE to DIAG mode. After the phone restarting, the apps has been revoke then i've no chances to install the apps again to fix it back to ZUNE mode.
Now the phone can operate as usual but cannot recognize by zune (yellow exlamation mark in device manager in PC).
The good news is, the phone had recognized by pc when entering this mode. and the devices manager detect the phone under Portable Devices -> Schubert. Can we sideloading apps using this mode? If yes... it was a good news for those having the same problem with me. But the question is.. HOW.
Note: After the incident, I already flash the phone. but still unable to be detected by ZUNE Desktop in normal state. it can operate, can install from market place as usual but cannot sync with zune desktop. Can somebody help me on this? Sorry for my English. You may refer with my attachment for the images and the XAP application.
Note 2: Never try the USBModeSwitch.xap if your phone is not fully unlock or will facing the same problem with me. hope someone can fix this issue. because lot of friends are stuck in this doom.
same problem here....
an hd7 too...
First, are your phones unlocked? I assume they are. Otherwise you wouldn't be able to deploy this USB-whatever.xap.
You may try deploying smth after running WPConnect (Phone has to be connected already). This small consoleapp does some funny stuff with the phone/PC connection. So maybe your devices will be recognized this way.
Best you start WPConnect from commandline, to have a look at the output, which should be smth like "[Devicename] successfuly connected..." or such.
C~
tried it, doesn't help
the phone is not unlocked anymore... that is the problem in my case ;-)
but i was able to install the HTC Diagnostic Drivers...
but i dont know if i can use it to disable Diag-Mode...
And you are not able to re-unlock your phone (via official or Chevron)? Have you tried to unlock after connecting - closing Zune - running WPConnect?
This is just a mere guess, but hey, who knows it maybe work
we cannot lock our devices as neither zune nor WPConnect realize that the phone is connected (because of it is in Diagnostic-Mode)
but thanks for your reply ;-)
Oberoth said:
we cannot lock our devices as neither zune nor WPConnect realize that the phone is connected (because of it is in Diagnostic-Mode)
but thanks for your reply ;-)
Click to expand...
Click to collapse
Yup that's true. I try to used ansar ROM, flash it, but nothing change. I wonder if we can custom a rom and implement the extract file of USBModeswitch.xap to the rom. so that the phone will boot with usbmodeswitch installed in it, using this step, we're able to switch the mode from diag back to zune.
This the final technique might can help for now. For the ROM, i can only break/extract until I've got the 2 OS file:- 2_os.nb.extra (±2.4MB) and the other one is 2_os.nb.payload (±181MB). Ok, until then, I was stuck. if not... we can extract the XAP directly to the OS folder, then repacking back the ROM. the 2_os.nb.payload file was unable to extract to bin file. Error shown:- "no boot partition". Maybe I'm using the old WinMo tools to extract it.
ahhh.... gosh... stuck in this step. any help and guide will be much appreciated.
AzmanIshak said:
Yup that's true. I try to used ansar ROM, flash it, but nothing change. I wonder if we can custom a rom and implement the extract file of USBModeswitch.xap to the rom. so that the phone will boot with usbmodeswitch installed in it, using this step, we're able to switch the mode from diag back to zune.
This the final technique might can help for now. For the ROM, i can only break/extract until I've got the 2 OS file:- 2_os.nb.extra (±2.4MB) and the other one is 2_os.nb.payload (±181MB). Ok, until then, I was stuck. if not... we can extract the XAP directly to the OS folder, then repacking back the ROM. the 2_os.nb.payload file was unable to extract to bin file. Error shown:- "no boot partition". Maybe I'm using the old WinMo tools to extract it.
ahhh.... gosh... stuck in this step. any help and guide will be much appreciated.
Click to expand...
Click to collapse
Hi,
from your writing i can read that you have the needed knowledge to make this thing...
so how long do you think will it take to get the two files...
and if you get these files, how can we flash that ROM without HSPL or SSPL?
thanks for your answer ;-)
our problem is... there's still no kitchen for WP7 (temporary). So.. we have to wait Da_G or Ansar.Ath.Gr work. they might have some tools that can help us. I knew.. lot of our friend already stuck in this mode as well. So... there's no sync with zune for us... no music transfer via usb.. and we have to forget all the thing that we can do using the USB cable except for charging it. lol~ how sick...
yeah...
i can only listen to radio in the morning when i drive to school...
i hate the most of the breakfast-shows
i have another idea instead of waiting for an C-ROM...
but that is only possible with a clean, Chevron-Unlocked and USB-Switch installed WP7 phone...
so nothing personally...
and we need to wait for the update...
the whole clean system would be backed up and could be used for our WP7 devices to get the USBSwitch-App onto our phone (holding camera-key when starting to install backup)
would be great if there is anybody who makes it...
hi
ask the autor of this http://forum.xda-developers.com/showthread.php?t=922000
maybe he can help ,his tool use usbmodeswitch.
im active in his thread too, but he didn't answer at all...
I have actally done this myself sadly the only option I had was to sync all my contacts with Windowslive and reset the HD7 by holding both volume keys while powering it on from a cold boot.
AzmanIshak said:
This mode was accidentally entered when I'm trying to boot my htc hd7 and press camera button together with volume up (around 20sec while the phone booting). For your information, my htc hd7 having problem with zune application and my device manager recognize it as unknown devices (yellow exclamation mark).
It was caused when I've sideloading USBModeSwitch.xap and change from ZUNE to DIAG mode. After the phone restarting, the apps has been revoke then i've no chances to install the apps again to fix it back to ZUNE mode.
Now the phone can operate as usual but cannot recognize by zune (yellow exlamation mark in device manager in PC).
The good news is, the phone had recognized by pc when entering this mode. and the devices manager detect the phone under Portable Devices -> Schubert. Can we sideloading apps using this mode? If yes... it was a good news for those having the same problem with me. But the question is.. HOW.
Note: After the incident, I already flash the phone. but still unable to be detected by ZUNE Desktop in normal state. it can operate, can install from market place as usual but cannot sync with zune desktop. Can somebody help me on this? Sorry for my English. You may refer with my attachment for the images and the XAP application.
Note 2: Never try the USBModeSwitch.xap if your phone is not fully unlock or will facing the same problem with me. hope someone can fix this issue. because lot of friends are stuck in this doom.
Click to expand...
Click to collapse
can you tell me what rom was on the phone and what rom you flashed After you F*****up your phone ?
I want to know what Radio was on it , I think that tool does something with the radio rom on the phone , it could help the flash an older rom using a goldcard with an older radiorom in it.
edit:
maybe it is the spl , try to flash a rom with a lower/higher spl number.
ceesheim said:
can you tell me what rom was on the phone and what rom you flashed After you F*****up your phone ?
I want to know what Radio was on it , I think that tool does something with the radio rom on the phone , it could help the flash an older rom using a goldcard with an older radiorom in it.
edit:
maybe it is the spl , try to flash a rom with a lower/higher spl number.
Click to expand...
Click to collapse
Hi Ceesheim, thanks for reply. I'm not remember my preveous ROM, by the way
currently only RUU_Schubert_hTC_Asia_WWE_1.23.707.01_Radio_5.51.09.06a_22.30.50.09U_Signed_by_ansar that can be flash to my phone.
AzmanIshak said:
Hi Ceesheim, thanks for reply. I'm not remember my preveous ROM, by the way
currently only RUU_Schubert_hTC_Asia_WWE_1.23.707.01_Radio_5.51.09.06a_22.30.50.09U_Signed_by_ansar that can be flash to my phone.
Click to expand...
Click to collapse
thats a modded rom (don't use it)
try this one :
http://forum.xda-developers.com/showthread.php?t=853945
Hi
i think the best way to fix your problem is this rom.
http://forum.xda-developers.com/showthread.php?t=948497
this one contain developer tools & can help you with usb problem.
send me a pm after install it an maybe we can fix this.
xboxmod said:
Hi
i think the best way to fix your problem is this rom.
http://forum.xda-developers.com/showthread.php?t=948497
this one contain developer tools & can help you with usb problem.
send me a pm after install it an maybe we can fix this.
Click to expand...
Click to collapse
ok... will test it now. thanks!
I'll report to you after complete. thanks again~
xboxmod said:
Hi
i think the best way to fix your problem is this rom.
http://forum.xda-developers.com/showthread.php?t=948497
this one contain developer tools & can help you with usb problem.
send me a pm after install it an maybe we can fix this.
Click to expand...
Click to collapse
I already download and install to my PC. but cannot flash to my phone.
Currently the only ROM that my HD7 can flash is with this number: 1.23.707.01
Make a goldcard and then flash it
Sent from my HD7 T9292 using Board Express