Hi
My Uni is dead, dont enter in bootloader mode, dont upgrade, dont do nothing.
Please help me, i dont know what happen.
You have to give us more clue. What were you doing with the Universal before this happened? Were you in the process of upgrading, downloading, etc...?
cktlcmd said:
You have to give us more clue. What were you doing with the Universal before this happened? Were you in the process of upgrading, downloading, etc...?
Click to expand...
Click to collapse
I upgrade with Vista. Dont work nothing.
Solution..
Hey i had the same problem... the Screen will say Serial no. and at the bottom it will say V. 1.01
Just do one thing.... connect yr fone to a desktop with Xp and then try running the upgrader... make sure u have the Sync software with u.....
I know this because the same thing happened with me.. my fone was dead.. till i did this..
try it
danidabest said:
Hey i had the same problem... the Screen will say Serial no. and at the bottom it will say V. 1.01
Just do one thing.... connect yr fone to a desktop with Xp and then try running the upgrader... make sure u have the Sync software with u.....
I know this because the same thing happened with me.. my fone was dead.. till i did this..
try it
Click to expand...
Click to collapse
My problem is the screen dont have nothing, any letters ou numbers.
having constantly the 150 connection error message
hellonasty said:
My problem is the screen dont have nothing, any letters ou numbers.
having constantly the 150 connection error message
Click to expand...
Click to collapse
Have you tried the suggestion at least?
Look for the original ROM of your device and find a WINDOWS XP computer and try to reflash with those 2 as suggested from above.
i want Try Mamaich Method but dont recognize the usb port.
Do you know?
Thanks
hellonasty said:
i want Try Mamaich Method but dont recognize the usb port.
Do you know?
Thanks
Click to expand...
Click to collapse
I don't think it would work. The Mamaich method is for a different problem. Yours clearly is due to Windows Vista incompatibility. I had read a couple of this type of thread in the past and the only solution was already given to you.
do you know where is the original rom?
hellonasty said:
do you know where is the original rom?
Click to expand...
Click to collapse
What type of Universal do you have? TMobile, O2, IMate...etc?
Sorry
I have a qtek9000
Before I tried my 1st upgrade I download the official ROM just in case.
I thought I had it but I can't find it. I have one copy on the PC at work, but I will only return there next Wednesday, so no big help.
I remember see a post were a member informed that he had an ftp with all the ROMS. Maybe some one remember the address. If I get, it i will post it.
Cheers.
Here: http://forum.xda-developers.com/showthread.php?t=296651&highlight=official+qtek+rom
Take a look into this thread at POST #7 by nvatvani
---
cktlcmd said:
Here: ftp://ftp.xda-developers.com/Universal/Uni_AKU2_WWE/QTEK_9000/
---
Click to expand...
Click to collapse
Am I wrong or those are the files that have been deleted because M$ "request"?
ultravox said:
Am I wrong or those are the files that have been deleted because M$ "request"?
Click to expand...
Click to collapse
OOOOPPPPs. that was the wrong dead link. But I corrected it already.
dead xda
i was trying to upgrade rom downloaded from o2 for my xda 2i i have same problem as previous guy i have tried to load from windows xp machine but get connection error 101 my screen is blank apart from usb and v1.01 can anyone help?
sounds to me like it might be as simple as a dead battery.
1. what happens when you try to charge it with the wall charger?
2. have you tried switching batteries?
3. you still haven't said what you were doing with the device before this happend
4. this is totally unrelated to WM6 Forum, you shouldn't have posted this here
when you put your universal on usb with a pc on xp there is a detection? or not and are you sur that there isn t any write on the screen .
because i have the same pb in 2006 an ithink that my universal is dead an aftrer 2 day i put the universal on the light and i see v101 if you don t see to the light you don t see it because the backlight don t work.
in this case the led for the charging don t work to.
if you have this there is a solution with a free operator rom i think it s on my pc.if you need tell me
sudf said:
when you put your universal on usb with a pc on xp there is a detection? or not and are you sur that there isn t any write on the screen .
because i have the same pb in 2006 an ithink that my universal is dead an aftrer 2 day i put the universal on the light and i see v101 if you don t see to the light you don t see it because the backlight don t work.
in this case the led for the charging don t work to.
if you have this there is a solution with a free operator rom i think it s on my pc.if you need tell me
Click to expand...
Click to collapse
Thanks
It do not enter boot loader with light + power + reset and show no signs of life.
The light is off.when i push reset button flash the red light.
When connected to USB, PC reports "USB device not recognised"
I want a original rom for qtek9000 for test.
Anybody have this rom?
When I bricked my XDA Exec by means of hung program during the upgrade, I had: no reaction to normal Reset, no entry to Bootloader - basically a brick.
I did LeftSoftKey + RightSoftKey + Reset to do a *hard* reset (everything was lost anyway), and after that I could see "Serial... v1.01" Bootloader notification. When you connected that to a computer, it changed to "USB... v1.01" prompt.
So I just took JWright's image, and re-flashed it.
Guess what? It detected I had no image/extRom/RadioRom whatsoever then offered to re-flash them. I knew I'm OK when Radio upgrade progress indicator started to move.
It took me to get to another machine first, however. My Vista machine totally screwed up things, whereas my home XP managed to do the job.
Sitting on JWright's 2.02.02 now - very thoroughly made ROM, love Voice Command integrated with it instead of crappy Cyberon's software.
Related
Hi there,
i cant upgrade my phone. i get an error 264.
i even hardresetted the phone and tryed.
when i start the "hardspl.bat" my mobile wants to run a jumper file. but when i press yes the screen turns white the connection brakes and i cant upgrade too.
and when i dont press yes and do nothing the updater starts but its stock at 0% and after some time i get the error o0
what have i done wrong ?
greetings
sluppy
same thing happens here, my usb connection losts while whitescreen loaded, i will try with another computer tomorrow...
by the way bootloader way doenst work, i have tryed several times, several roms, it has just come back from service due to speaker problem...
G4
OS 2.20.7.34
Qtek s200
so i can get into the 3 colored screen if i dont press yes when i am asked if i want so start the jumperspl. if i dont press anything the screen gets into 3 colors. but i get an error on the PC and i can do anything. but it seems that the usb connection is still running.
sluppy said:
so i can get into the 3 colored screen if i dont press yes when i am asked if i want so start the jumperspl. if i dont press anything the screen gets into 3 colors. but i get an error on the PC and i can do anything. but it seems that the usb connection is still running.
Click to expand...
Click to collapse
Please read the thread in my signature...
be patient ~~~ only less than half an hour to complete flashing........
download all needed files first~~~~
What is yr PC oS
I have d same error in win XP and Vista.
Try use win 2000.
I solved my using win2000.
its just not working! i copied the jumperfiles, i plugged the phrophet i run the spl i plugged the propeht in again and when i run the update thing i get an error.
it is me again
it has done today, i hav triyed again with my old notebook at work today and it's succeded, it think my home computer's mainboard have a sumething like usb connection problem.
I will try later with rear USB ports
i tryed it on a nother maschine and its not working. same error. and i 100% did whats described in the threats! every available method
sluppy said:
i tryed it on a nother maschine and its not working. same error. and i 100% did whats described in the threats! every available method
Click to expand...
Click to collapse
not about PCs, read again my thread ... is that you have a G4 device?
go to my signature again. Many successful cases.....................
yes its a g4 and i read ure thread. and tryed it serveal times. but its just not working
sluppy said:
yes its a g4 and i read ure thread. and tryed it serveal times. but its just not working
Click to expand...
Click to collapse
read more
http://forum.xda-developers.com/showpost.php?p=1937273&postcount=103
okay i think i found the error ... i had windows runnin on my mac with a virtuall mashine and it wasnt able to connect virtual windows with the bootloader.
but i got an other error now. if i run hardspl, i everything seems to run find. but its still the old 2.15 hard spl on the prophet even if its supposed to be a 2.20.
do i have to crack some kind of romlock befor? (its a german o2 XDA)
oh okay do i have to unlock the CID? i searched the prophet forum but didnt find anything specific.
-> http://wiki.xda-developers.com/index.php?pagename=Prophet_CID_Unlock is G4 only :/
Hey guys,
i had the same error and i tried just the same one more time, so romupdateutility.exe and it worked!!
error codes and its definition
this might help to define those error codes... got it in one of the files i downloaded from this forum...
sometimes README helps )
Hi,
I've a little problem.. yesterday the rain shocked my htc p3651..
Today I was able to make a backup (it works 'cause I tried with wm6 emulator).
Now when I turn on my pda I see the RGB screen and:
POLA*** MFG
SPL-2.20.Olinex
CPLD-2
and if there's the MicroSD inserted it tells "No Image File!" for a while.
I tried with hard reset: I held both lower buttons with the stylus in.. then I released the stylus helding buttons.. but no hard reset.
I really don't know what I've to do.. please help me!
Thanx
It sounds like the rain caused your device to short na dump the rom. I would try to reflash your phone with a rom of your choice and see if that works. Make sure that you take the battery off and blow dry it for a while to ensire that it is dried out. Good luck.
Hyden121 said:
It sounds like the rain caused your device to short na dump the rom. I would try to reflash your phone with a rom of your choice and see if that works. Make sure that you take the battery off and blow dry it for a while to ensire that it is dried out. Good luck.
Click to expand...
Click to collapse
Thanx 4 the answer. Please can u tell me a guide for reflashing it? It's the first time and I don't know where I've to begin from..
Well the tri colored screen is the boot loader screen. If you are using Vista then launch windows mobile device center and plug in your phone. Download a rom and launch it. It should hopefully read your device. Then just click next through the rest of the prompts and see if you can get that rom on there. If you are using windows XP then you will need to launch Active Sync. It really is fairly simple after you do it the first time... If your device is not unlocked then you need to fsearch the forums to find out how to unlock it.
Hyden121 said:
Well the tri colored screen is the boot loader screen. If you are using Vista then launch windows mobile device center and plug in your phone. Download a rom and launch it. It should hopefully read your device. Then just click next through the rest of the prompts and see if you can get that rom on there. If you are using windows XP then you will need to launch Active Sync. It really is fairly simple after you do it the first time... If your device is not unlocked then you need to fsearch the forums to find out how to unlock it.
Click to expand...
Click to collapse
Thanx again. I use XP and let me ask to you the last question: is it possible to do it directly from MiniSD?
I know there is a way to flash a rom from the mini sd card but I have never done it. Search the forums. I know I have seen it covered there.
go to xda-wiki and click on polaris. there youll find what your looking for.
I tried.. with 2 or 3 ROMs (original too) but still start with bootloader..
I've done it from MicroSD 'cause USB doesn't work.. does it nees some particular drives? Now is Microsoft USB Sync..
Thanx a lot
so you cant enter bootloader? but you have activesync 4.5 installed on your pc?
Hi...
I was trying to Upgrade my O2 XDA Exec Rom with Windows Mobile 6.5 by explode. The process went successfully till 99% and after that it ended up with Error. Then I unplugged my pda from the pc and tried to restart the device. I was surprised that the device did not respond to any of the following
Soft Reset
Hard Rest
Boot Loader mode Start (Bulb + Power + Reset)
It is totally blank screen whatever you do.
When I connected the device to the pc with usb cable, a Red Light is shown for 2 seconds and then goes off and a message comes up on the pc that "USB DEVICE NOT RECOGNIZED".
Then I tried to Remove battery from the device for a whole night and the next day morning i did all the above procedures again to get no results.
Kindly Help me out
Thanks
Dinesh Kumaar
I think you have been bricked your device...
dineshkumaar said:
Hi...
I was trying to Upgrade my O2 XDA Exec Rom with Windows Mobile 6.5 by explode. The process went successfully till 99% and after that it ended up with Error. Then I unplugged my pda from the pc and tried to restart the device. I was surprised that the device did not respond to any of the following
Soft Reset
Hard Rest
Boot Loader mode Start (Bulb + Power + Reset)
It is totally blank screen whatever you do.
When I connected the device to the pc with usb cable, a Red Light is shown for 2 seconds and then goes off and a message comes up on the pc that "USB DEVICE NOT RECOGNIZED".
Then I tried to Remove battery from the device for a whole night and the next day morning i did all the above procedures again to get no results.
Kindly Help me out
Thanks
Dinesh Kumaar
Click to expand...
Click to collapse
if it's not recognized, remove the SIM card, the SD card, and on the PC open activesync and disable usb connections. for more info open this link
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
what if the device is bricked
Thanks for your quick reply
Kindly let me know what could be done with the bricked device. Can it be repaired again.
Thanks again
Dinesh Kumaar
dineshkumaar said:
Thanks for your quick reply
Kindly let me know what could be done with the bricked device. Can it be repaired again.
Thanks again
Dinesh Kumaar
Click to expand...
Click to collapse
you have to find another rom and try to flash it to your PDA.
ARE YOU RUNNING windows XP on your PC?
Yes ! I have Windows XP SP2 and Active Sync Version 4.5.0 (Build 5096)
Thanks
dineshkumaar said:
Yes ! I have Windows XP SP2 and Active Sync Version 4.5.0 (Build 5096)
Thanks
Click to expand...
Click to collapse
have you tried to upgrade another ROM, and if you did, is your PDA now working?
I cannot update my rom as my pc cannot recognize my device. is there any other way to update rom?
dineshkumaar said:
I cannot update my rom as my pc cannot recognize my device. is there any other way to update rom?
Click to expand...
Click to collapse
Have you read here?
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
Try to reflash with another ROM
Hope it helped
And don´t forget to vote!
I had already done those steps to get no results.
its my badluck.
If you cannot get into bootloader and you have done the steps above, then you cannot flash to another rom.......it would seem you now have a paperweight im afraid
I am still not able to revive my device. I know that it is just due to corrupt bootloader but don't know how to repair it.
If anybody ever has solution for this... kindly let me know.
Regards
Have you tested mtty?
I would recommend to PM a chef on Universal forum
Good luck,
Mtty is not detecting my device
it says can't open usb port
One More thing I have noted is that when I keep the device connected with the pc, at a certain interval of about 10-15 mintues my device's Led shows RED Light for few seconds and then turns off followed by the the "USB device not recognized" on my pc.
I hope this can be used as a hint towards reviving my device.
Regards
have you followed orbs advise above and pm a chef on that section, they maybe able to help. From my knowledge (limited on that device) i ddont think there is any recovery proceedure that you have not tried. Have u downloaded offical wm5 rom and tried it. I know and appreciate that it will probably not work due to corrupt bootloader, but what else is there to do??
To understand more, what did you do PRIOR to trying to flash to 6.5.
Did you hardspl correctly? Had you already flashed to another rom and just felt like flashing to another new rom?? Give us more detail.
Thanks for your reply
I dont know how to PM Chef.
I had used 3 other Rom versions of WM6.1 on my device. They ran very much fine on my device. But When i found WM6.5 xplode, I wished to try that too. But the rom update procedure went successfully till 99% and after that it showed an error that upgrade was not successfull. I pulled out the device and tried to restart if by all methods but I wasnt able to power on at all.
Thanks
Regards
ok, goto the thread that you got the rom off, click the chefs name and you will get a menu there to send pm, do it, he might have seen a similar problem or know how to correct bootloader.
good luck
noup really no...
Is bricked
my bro has bricked an Universal and the same led turns red no power off no bootloar no power it means the flash chip is dead!
Sorry to heard that.
He waits too long for the upgrade it tooks at least 40 minutes
then ERROR... but you know... the batt was died in middle process ( th batt was ****ed up, it say full charged but no! it was on 60 or 50%) then the stupid thing is make a hardreset.. i told him dont hR your device... justa simple reste and reinit the process... and huh! its bricked.
if you are interested on sell your parts
maybe my bro want some parts.
my advice(similar to other people):
1. Charge your batery somehow (in other device or anything else)
2. put your devce in bootloader mode and connect it to pc - it wll be detected like microsoft usb sync
3. use mtty try difrend versions becuse sometimes 1.42 does not detect it properly - read here for what to do with mtty
IMO this may be battery problem or nand chip problem - in both cases it is hardware fail
Hi ! I have a problem with my Kaiser ! The screen is black, the device doesn't turn on ! But when i hold the power key & soft reset hole at the same time,
green light comes on, but the screen stays black ! Is there a way to make my kaiser working ? (Sorry for my english)
Remove battery and then press power button 30 seconds or more.
Worked for me.
Assface said:
Remove battery and then press power button 30 seconds or more.
Worked for me.
Click to expand...
Click to collapse
it doesnt work ! I think there is a problem with spl , because this problem appears after unsuccessful hard spl installing ! I don know how to fix this
IP13 said:
Hi ! I have a problem with my Kaiser ! The screen is blank, the device doesn't turn on ! But when i hold the power key & soft reset hole at the same time,
green light comes on, but the screen stays blank ! Is there a way to make my kaiser working ? (Sorry for my english)
Click to expand...
Click to collapse
Not trying to oversimplify things, but is the device fully charged? Did you have any problems during the flash? Which SPL did you flash? Have you tried a hard reset? Can you get to the bootloader screen to verify the version of SPL installed vs. the version you tried to install?
Just a few questions to help us try to figure out what is going on. Take care!
krouth said:
Not trying to oversimplify things, but is the device fully charged? Did you have any problems during the flash? Which SPL did you flash? Have you tried a hard reset? Can you get to the bootloader screen to verify the version of SPL installed vs. the version you tried to install?
Just a few questions to help us try to figure out what is going on. Take care!
Click to expand...
Click to collapse
The device is fully charged ! The problem was when I tried to install hard spl ...the screen stuck and I made a reset ,after this the phone ca not be turned on and all I see is green light.
I can not get to bootloader screen , when i try to turn on the device the screen i black (blank) but the green light is on
IP13 said:
The device is fully charged ! The problem was when I tried to install hard spl ...the screen stuck and I made a reset ,after this the phone ca not be turned on and all I see is green light.
I can not get to bootloader screen , when i try to turn on the device the screen i black (blank) but the green light is on
Click to expand...
Click to collapse
How are you trying to get to the bootloader screen? Have you fully read through this thread:
http://forum.xda-developers.com/showthread.php?t=533976
Finally, I would recommend downloading the original ROM and installing it. The ROM for the Tilt is here:
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=2&dl_id=94
That is straight from HTC's website, and you might look to see if your specific phone is there. You should be able to download it, connect your phone with the USB cable and run the downloaded file from your computer to bring your phone back to it's original state.
If that works, I would then re-read the link above thoroughly and give it another shot. Hope this helps!
krouth said:
How are you trying to get to the bootloader screen? Have you fully read through this thread:
http://forum.xda-developers.com/showthread.php?t=533976
Finally, I would recommend downloading the original ROM and installing it. The ROM for the Tilt is here:
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=2&dl_id=94
That is straight from HTC's website, and you might look to see if your specific phone is there. You should be able to download it, connect your phone with the USB cable and run the downloaded file from your computer to bring your phone back to it's original state.
If that works, I would then re-read the link above thoroughly and give it another shot. Hope this helps!
Click to expand...
Click to collapse
Active sync doesnt recognize my Kaiser!
IP13 said:
Active sync doesnt recognize my Kaiser!
Click to expand...
Click to collapse
When you try to run the original HTC ROM installation program (from my previous post) with your phone connected - does it recognize your Kaiser?
krouth said:
When you try to run the original HTC ROM installation program (from my previous post) with your phone connected - does it recognize your Kaiser?
Click to expand...
Click to collapse
no,it doesnt recongnize my kaiser ! when I connect my kaiser via USB Windows says that i have conected a "ZTE USB Modem 6000 CDMA 1x"
IP13 said:
no,it doesnt recongnize my kaiser ! when I connect my kaiser via USB Windows says that i have conected a "ZTE USB Modem 6000 CDMA 1x"
Click to expand...
Click to collapse
I am not asking what Windows thinks you have connected, or whether or not ActiveSync sees the device. What I am asking is: When you run the original HTC ROM installation program:
"RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe"
downloaded from HTC's website, is that program able to see your phone and go through the installation process?
IP13 said:
no,it doesnt recongnize my kaiser ! when I connect my kaiser via USB Windows says that i have conected a "ZTE USB Modem 6000 CDMA 1x"
Click to expand...
Click to collapse
Uninstall Ur Active synce And Install Again .
Then Put Ur Phone In Bootloader Mode I Hope Work Fine
CHK And Post Result
krouth said:
I am not asking what Windows thinks you have connected, or whether or not ActiveSync sees the device. What I am asking is: When you run the original HTC ROM installation program:
"RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe"
downloaded from HTC's website, is that program able to see your phone and go through the installation process?
Click to expand...
Click to collapse
I cant install this rom because it shows me an error : "ERROR [260] CONNECTION
The Update Utillity cannot connect your PDA Phone . Please check that your USB cradle/cable is connected properly between the PC and your PDA phone .
Chech the following :
1.The PDA Phone is connected to the USB cradle/cable.
2.The USB cradle/cable is connected to the PC "
I have allready checked the cable (it works with my other PDA)
delower10 said:
Uninstall Ur Active synce And Install Again .
Then Put Ur Phone In Bootloader Mode I Hope Work Fine
CHK And Post Result
Click to expand...
Click to collapse
I cannot acces bootloader mode , when I am pressing keys to acces bootloader mode the phone screen is still black /blank .
IP13 said:
I cannot acces bootloader mode , when I am pressing keys to acces bootloader mode the phone screen is still black /blank .
Click to expand...
Click to collapse
To access bootloader, you should hold down the camera button (on right side of phone) and the use the stylus to press the reset button (on bottom of phone.) When the phone goes blank, release the camera button.
When you do this, do you still get the blank/black screen?
Also, did you follow EACH step in the following thread:
http://forum.xda-developers.com/showthread.php?t=433835
krouth said:
To access bootloader, you should hold down the camera button (on right side of phone) and the use the stylus to press the reset button (on bottom of phone.) When the phone goes blank, release the camera button.
When you do this, do you still get the blank/black screen?
Also, did you follow EACH step in the following thread:
http://forum.xda-developers.com/showthread.php?t=433835
Click to expand...
Click to collapse
Yes ! I also get the blank screen after following all this steps !
IP13 said:
Yes ! I also get the blank screen after following all this steps !
Click to expand...
Click to collapse
I am not sure.... I have done some searching and ran across this thread:
http://forum.xda-developers.com/showthread.php?t=423486
It has numerous posts about problems people have experienced flashing - maybe you might get some insight there - or at least post your question there where more people might be monitoring the thread. Good luck!
Please take your issue to the right place, better than open a new thread, I sugest
http://forum.xda-developers.com/showthread.php?t=433835
Your situation should be taken by the right guys, not just gessing if this or that might solve the situation, male a post there
Also have a look at the sticky on the top, try to get Dave Shaw help
THx I will try to ask there ....
Fanning the flames.
Okay if you can't access the boot loader then you need to go higher up. I think the chain is Radio Rom, then SPL, then OS. Basically your SPL is gone, that is why your screen is black and you can't get into the boot loader --- cause its gone. So no duh, it can't load the OS. So, your only hope is that your radio rom is working so you can access the phone via cmd interface programmed within it.I really don't know what i'm talking about, but I've bricked my phone too and with some guidance (er explicit instructions in chat) I was (er she was) able to fix it [my situation was far more complicated with a "security locked" device, and a "radio from hell"]. Your key words are frankenkaiser. which you can find here:
http://forum.xda-developers.com/showthread.php?t=394584
Good luck, if you can get into the oemsbl I'm sure your in business. If your feeling nervous bust out the paypal and head to irc.freenode.org #xda-devs {albeit someone will likely help you without the donation but for real your going to hold someone up for an hour or two you should throw them atleast 20$ to save u 200$ }
tyler51773 said:
Okay if you can't access the boot loader then you need to go higher up. I think the chain is Radio Rom, then SPL, then OS. Basically your SPL is gone, that is why your screen is black and you can't get into the boot loader --- cause its gone. So no duh, it can't load the OS. So, your only hope is that your radio rom is working so you can access the phone via cmd interface programmed within it.I really don't know what i'm talking about, but I've bricked my phone too and with some guidance (er explicit instructions in chat) I was (er she was) able to fix it [my situation was far more complicated with a "security locked" device, and a "radio from hell"]. Your key words are frankenkaiser. which you can find here:
http://forum.xda-developers.com/showthread.php?t=394584
Good luck, if you can get into the oemsbl I'm sure your in business. If your feeling nervous bust out the paypal and head to irc.freenode.org #xda-devs {albeit someone will likely help you without the donation but for real your going to hold someone up for an hour or two you should throw them atleast 20$ to save u 200$ }
Click to expand...
Click to collapse
Thx man , appreciate this !!
Hi guys,
First of all, i want to apologise for my english. Anyway , i have a huge problem whith my oneplus one.Two months ago, i flashed a wrong modem , the phone turn off and never restart again. I already tried all the method posted here, i changed my windows 7 for windows xp and windows 10, and no result at all. My main problem is that my laptop don´t even show the phone like qhsusb_bulk despite of al the drivers i try. In my case i think that only a kind of JTAG repair might work. I´m so desperate , what can i do?Tkns in advance for your help.
Anyone?
burebista001 said:
Anyone?
Click to expand...
Click to collapse
Please open a thread in the oneplus 2 forums
darshiz said:
Please open a thread in the oneplus 2 forums
Click to expand...
Click to collapse
Oneplus 2´s forum? Mine is oneplus one
burebista001 said:
Oneplus 2´s forum? Mine is oneplus one
Click to expand...
Click to collapse
does the phone do anything AT all when u try turn it on? get warm or anything? if not, hold power button for about a minute to make 100% sure (trust me, hold it for a long time) if still so sign of life, put it on charger for about 30 mins and then do the power again. IF STILL no sign, change cable and plug it into pc and if no luck, try different usb slots. and even better, try a different computer.
burebista001 said:
Oneplus 2´s forum? Mine is oneplus one
Click to expand...
Click to collapse
Oops read it wrong
burebista001 said:
Hi guys,
First of all, i want to apologise for my english. Anyway , i have a huge problem whith my oneplus one.Two months ago, i flashed a wrong modem , the phone turn off and never restart again. I already tried all the method posted here, i changed my windows 7 for windows xp and windows 10, and no result at all. My main problem is that my laptop don´t even show the phone like qhsusb_bulk despite of al the drivers i try. In my case i think that only a kind of JTAG repair might work. I´m so desperate , what can i do?Tkns in advance for your help.
Click to expand...
Click to collapse
One plus one will not hard brick, by flashing a wrong modem.. Anyway, please try to do the below steps:
1. Connect your phone to a wall charger(direct A.C current input) and charge it for atleast 16 to 18 hours, since it is not fully charged and used, sometimes it needs power thrust(battery mightve been cold).
2. Download factory image of the original firmware(search in XDA for Timma's guide, to return to opo stock)
3. Follow the procedure given in that guide.
4. If not, after charging, connect the phone in download mode and flash the factory image of the phone, which you have downloaded.
5. If all this fails, it might be a hardware issue, only RMA can help(service center) - if the phone is under warranty...
Hope this helps
Fix For Hard Bricked Oneplus One
Cheer Up Dude. There Is A Fix For Hard Bricked Oneplus One By netbuzz.
I too had once hard bricked my 1+1 by flashing a boot logo on cm12.1 and my device wouldn't turn on. When I press the power and volume keys it would only vibrate. I fixed it using netbuzz tutorial.
The fix is that you have to flash Color OS, and then you can flash the stock OS.
I am sorry I still can't submit links. But do check out on Google for the following.
[GUIDE] [UNBRICK] Unbrick Oneplus One by netbuzz.
Hit the Thanks Button if I have helped you. And if you are stuck anywhere in the process,don't hesitate to PM me.(!Warning! I might reply late.!EXAMS ARE GOING ON!).
Thank you guys. The problem whith my opo is that it don´t vibrate or anything when i press power+volum up and the laptop don´t see it like qhsusb_bulk. I allready tried to charge it 16-24 hours, connect it whith different cable, usb port and pc. I don´t know what can i do.
burebista001 said:
Thank you guys. The problem whith my opo is that it don´t vibrate or anything when i press power+volum up and the laptop don´t see it like qhsusb_bulk. I allready tried to charge it 16-24 hours, connect it whith different cable, usb port and pc. I don´t know what can i do.
Click to expand...
Click to collapse
DID YOU CHECK THE SOLUTION BY netbuzz for fixing bricked phones using COLOR OS
Mr.Jlu said:
DID YOU CHECK THE SOLUTION BY netbuzz for fixing bricked phones using COLOR OS
Click to expand...
Click to collapse
Of course, didn´t work
burebista001 said:
Of course, didn´t work
Click to expand...
Click to collapse
Did'nt work means?
Where you got stuck?
You have to be on Windows xp for the drivers to get detected.
Mr.Jlu said:
Did'nt work means?
Where you got stuck?
You have to be on Windows xp for the drivers to get detected.
Click to expand...
Click to collapse
Today i will upload images whith it, windows xp don´t see the opo.
burebista001 said:
Today i will upload images whith it, windows xp don´t see the opo.
Click to expand...
Click to collapse
Is it 16gb or 64 GB variant?
Hope you installed drivers from ColorOS.zip Only and before doing that uninstall all the drivers you had installed for one plus one.
If you don't mind me asking. Where are you from?
Mr.Jlu said:
Is it 16gb or 64 GB variant?
Hope you installed drivers from ColorOS.zip Only and before doing that uninstall all the drivers you had installed for one plus one.
If you don't mind me asking. Where are you from?
Click to expand...
Click to collapse
Is a 64 Gb variant and yes , i´ve installed the proper driver. I´m living in Granada , Spain.
burebista001 said:
Is a 64 Gb variant and yes , i´ve installed the proper driver. I´m living in Granada , Spain.
Click to expand...
Click to collapse
Check this out see if it helps..
https://forums.oneplus.net/threads/unbrick-oneplus-one.421775/
Mr.Jlu said:
Did'nt work means?
Where you got stuck?
You have to be on Windows xp for the drivers to get detected.
Click to expand...
Click to collapse
I used that guide several times on Windows 8.1. You don't have to be on Windows XP, there's an extra step to turn on some developer mode though
Sent from my A0001 using Tapatalk
Renosh said:
I used that guide several times on Windows 8.1. You don't have to be on Windows XP, there's an extra step to turn on some developer mode though
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Yes, for windows 8/8.1/10 you have to disable driver signature for installing thrid party drivers since they are not signed by the processor brands such as intel etc.
Do one thing, shoot a video while doing the process that is explained by netbuzz. Upload it and share the link.
Let us anazlyze what is going wrong.
And i dont mind if you parcel your Oneplus to me. I would be happy to uunbrick it and parcel it back to You.LoL
Guys, i´ve notice a thing.It seems the battery has like a deformation in his down-left part. Might be this the problem?
burebista001 said:
Guys, i´ve notice a thing.It seems the battery has like a deformation in his down-left part. Might be this the problem?
Click to expand...
Click to collapse
tbh mate, why would u take ur phone apart if drivers aint detecting lol? yes the battery doesnt look healthy IF it hasnt been taken out before (did u buy it new?) i dont see how a battery would just stop workin after installing a modem though. I had the same issue with my LG G2 with the drivers, turned out i installed them funny (i didnt run as administrator) you lit have to read step by step and make 100% u dont miss a step, and as the bloke said above DELETE OLD DRIVERS AND INSTALL NEW it makes a massive difference. Other than that, no idea pal. My phones cracked, holes on the back casing and battered with custom roms and its never given me a problem