Hi guys,
First of all, i want to apologise for my english. Anyway , i have a huge problem whith my oneplus one.Two months ago, i flashed a wrong modem , the phone turn off and never restart again. I already tried all the method posted here, i changed my windows 7 for windows xp and windows 10, and no result at all. My main problem is that my laptop don´t even show the phone like qhsusb_bulk despite of al the drivers i try. In my case i think that only a kind of JTAG repair might work. I´m so desperate , what can i do?Tkns in advance for your help.
Anyone?
burebista001 said:
Anyone?
Click to expand...
Click to collapse
Please open a thread in the oneplus 2 forums
darshiz said:
Please open a thread in the oneplus 2 forums
Click to expand...
Click to collapse
Oneplus 2´s forum? Mine is oneplus one
burebista001 said:
Oneplus 2´s forum? Mine is oneplus one
Click to expand...
Click to collapse
does the phone do anything AT all when u try turn it on? get warm or anything? if not, hold power button for about a minute to make 100% sure (trust me, hold it for a long time) if still so sign of life, put it on charger for about 30 mins and then do the power again. IF STILL no sign, change cable and plug it into pc and if no luck, try different usb slots. and even better, try a different computer.
burebista001 said:
Oneplus 2´s forum? Mine is oneplus one
Click to expand...
Click to collapse
Oops read it wrong
burebista001 said:
Hi guys,
First of all, i want to apologise for my english. Anyway , i have a huge problem whith my oneplus one.Two months ago, i flashed a wrong modem , the phone turn off and never restart again. I already tried all the method posted here, i changed my windows 7 for windows xp and windows 10, and no result at all. My main problem is that my laptop don´t even show the phone like qhsusb_bulk despite of al the drivers i try. In my case i think that only a kind of JTAG repair might work. I´m so desperate , what can i do?Tkns in advance for your help.
Click to expand...
Click to collapse
One plus one will not hard brick, by flashing a wrong modem.. Anyway, please try to do the below steps:
1. Connect your phone to a wall charger(direct A.C current input) and charge it for atleast 16 to 18 hours, since it is not fully charged and used, sometimes it needs power thrust(battery mightve been cold).
2. Download factory image of the original firmware(search in XDA for Timma's guide, to return to opo stock)
3. Follow the procedure given in that guide.
4. If not, after charging, connect the phone in download mode and flash the factory image of the phone, which you have downloaded.
5. If all this fails, it might be a hardware issue, only RMA can help(service center) - if the phone is under warranty...
Hope this helps
Fix For Hard Bricked Oneplus One
Cheer Up Dude. There Is A Fix For Hard Bricked Oneplus One By netbuzz.
I too had once hard bricked my 1+1 by flashing a boot logo on cm12.1 and my device wouldn't turn on. When I press the power and volume keys it would only vibrate. I fixed it using netbuzz tutorial.
The fix is that you have to flash Color OS, and then you can flash the stock OS.
I am sorry I still can't submit links. But do check out on Google for the following.
[GUIDE] [UNBRICK] Unbrick Oneplus One by netbuzz.
Hit the Thanks Button if I have helped you. And if you are stuck anywhere in the process,don't hesitate to PM me.(!Warning! I might reply late.!EXAMS ARE GOING ON!).
Thank you guys. The problem whith my opo is that it don´t vibrate or anything when i press power+volum up and the laptop don´t see it like qhsusb_bulk. I allready tried to charge it 16-24 hours, connect it whith different cable, usb port and pc. I don´t know what can i do.
burebista001 said:
Thank you guys. The problem whith my opo is that it don´t vibrate or anything when i press power+volum up and the laptop don´t see it like qhsusb_bulk. I allready tried to charge it 16-24 hours, connect it whith different cable, usb port and pc. I don´t know what can i do.
Click to expand...
Click to collapse
DID YOU CHECK THE SOLUTION BY netbuzz for fixing bricked phones using COLOR OS
Mr.Jlu said:
DID YOU CHECK THE SOLUTION BY netbuzz for fixing bricked phones using COLOR OS
Click to expand...
Click to collapse
Of course, didn´t work
burebista001 said:
Of course, didn´t work
Click to expand...
Click to collapse
Did'nt work means?
Where you got stuck?
You have to be on Windows xp for the drivers to get detected.
Mr.Jlu said:
Did'nt work means?
Where you got stuck?
You have to be on Windows xp for the drivers to get detected.
Click to expand...
Click to collapse
Today i will upload images whith it, windows xp don´t see the opo.
burebista001 said:
Today i will upload images whith it, windows xp don´t see the opo.
Click to expand...
Click to collapse
Is it 16gb or 64 GB variant?
Hope you installed drivers from ColorOS.zip Only and before doing that uninstall all the drivers you had installed for one plus one.
If you don't mind me asking. Where are you from?
Mr.Jlu said:
Is it 16gb or 64 GB variant?
Hope you installed drivers from ColorOS.zip Only and before doing that uninstall all the drivers you had installed for one plus one.
If you don't mind me asking. Where are you from?
Click to expand...
Click to collapse
Is a 64 Gb variant and yes , i´ve installed the proper driver. I´m living in Granada , Spain.
burebista001 said:
Is a 64 Gb variant and yes , i´ve installed the proper driver. I´m living in Granada , Spain.
Click to expand...
Click to collapse
Check this out see if it helps..
https://forums.oneplus.net/threads/unbrick-oneplus-one.421775/
Mr.Jlu said:
Did'nt work means?
Where you got stuck?
You have to be on Windows xp for the drivers to get detected.
Click to expand...
Click to collapse
I used that guide several times on Windows 8.1. You don't have to be on Windows XP, there's an extra step to turn on some developer mode though
Sent from my A0001 using Tapatalk
Renosh said:
I used that guide several times on Windows 8.1. You don't have to be on Windows XP, there's an extra step to turn on some developer mode though
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Yes, for windows 8/8.1/10 you have to disable driver signature for installing thrid party drivers since they are not signed by the processor brands such as intel etc.
Do one thing, shoot a video while doing the process that is explained by netbuzz. Upload it and share the link.
Let us anazlyze what is going wrong.
And i dont mind if you parcel your Oneplus to me. I would be happy to uunbrick it and parcel it back to You.LoL
Guys, i´ve notice a thing.It seems the battery has like a deformation in his down-left part. Might be this the problem?
burebista001 said:
Guys, i´ve notice a thing.It seems the battery has like a deformation in his down-left part. Might be this the problem?
Click to expand...
Click to collapse
tbh mate, why would u take ur phone apart if drivers aint detecting lol? yes the battery doesnt look healthy IF it hasnt been taken out before (did u buy it new?) i dont see how a battery would just stop workin after installing a modem though. I had the same issue with my LG G2 with the drivers, turned out i installed them funny (i didnt run as administrator) you lit have to read step by step and make 100% u dont miss a step, and as the bloke said above DELETE OLD DRIVERS AND INSTALL NEW it makes a massive difference. Other than that, no idea pal. My phones cracked, holes on the back casing and battered with custom roms and its never given me a problem
Related
Hi
My Uni is dead, dont enter in bootloader mode, dont upgrade, dont do nothing.
Please help me, i dont know what happen.
You have to give us more clue. What were you doing with the Universal before this happened? Were you in the process of upgrading, downloading, etc...?
cktlcmd said:
You have to give us more clue. What were you doing with the Universal before this happened? Were you in the process of upgrading, downloading, etc...?
Click to expand...
Click to collapse
I upgrade with Vista. Dont work nothing.
Solution..
Hey i had the same problem... the Screen will say Serial no. and at the bottom it will say V. 1.01
Just do one thing.... connect yr fone to a desktop with Xp and then try running the upgrader... make sure u have the Sync software with u.....
I know this because the same thing happened with me.. my fone was dead.. till i did this..
try it
danidabest said:
Hey i had the same problem... the Screen will say Serial no. and at the bottom it will say V. 1.01
Just do one thing.... connect yr fone to a desktop with Xp and then try running the upgrader... make sure u have the Sync software with u.....
I know this because the same thing happened with me.. my fone was dead.. till i did this..
try it
Click to expand...
Click to collapse
My problem is the screen dont have nothing, any letters ou numbers.
having constantly the 150 connection error message
hellonasty said:
My problem is the screen dont have nothing, any letters ou numbers.
having constantly the 150 connection error message
Click to expand...
Click to collapse
Have you tried the suggestion at least?
Look for the original ROM of your device and find a WINDOWS XP computer and try to reflash with those 2 as suggested from above.
i want Try Mamaich Method but dont recognize the usb port.
Do you know?
Thanks
hellonasty said:
i want Try Mamaich Method but dont recognize the usb port.
Do you know?
Thanks
Click to expand...
Click to collapse
I don't think it would work. The Mamaich method is for a different problem. Yours clearly is due to Windows Vista incompatibility. I had read a couple of this type of thread in the past and the only solution was already given to you.
do you know where is the original rom?
hellonasty said:
do you know where is the original rom?
Click to expand...
Click to collapse
What type of Universal do you have? TMobile, O2, IMate...etc?
Sorry
I have a qtek9000
Before I tried my 1st upgrade I download the official ROM just in case.
I thought I had it but I can't find it. I have one copy on the PC at work, but I will only return there next Wednesday, so no big help.
I remember see a post were a member informed that he had an ftp with all the ROMS. Maybe some one remember the address. If I get, it i will post it.
Cheers.
Here: http://forum.xda-developers.com/showthread.php?t=296651&highlight=official+qtek+rom
Take a look into this thread at POST #7 by nvatvani
---
cktlcmd said:
Here: ftp://ftp.xda-developers.com/Universal/Uni_AKU2_WWE/QTEK_9000/
---
Click to expand...
Click to collapse
Am I wrong or those are the files that have been deleted because M$ "request"?
ultravox said:
Am I wrong or those are the files that have been deleted because M$ "request"?
Click to expand...
Click to collapse
OOOOPPPPs. that was the wrong dead link. But I corrected it already.
dead xda
i was trying to upgrade rom downloaded from o2 for my xda 2i i have same problem as previous guy i have tried to load from windows xp machine but get connection error 101 my screen is blank apart from usb and v1.01 can anyone help?
sounds to me like it might be as simple as a dead battery.
1. what happens when you try to charge it with the wall charger?
2. have you tried switching batteries?
3. you still haven't said what you were doing with the device before this happend
4. this is totally unrelated to WM6 Forum, you shouldn't have posted this here
when you put your universal on usb with a pc on xp there is a detection? or not and are you sur that there isn t any write on the screen .
because i have the same pb in 2006 an ithink that my universal is dead an aftrer 2 day i put the universal on the light and i see v101 if you don t see to the light you don t see it because the backlight don t work.
in this case the led for the charging don t work to.
if you have this there is a solution with a free operator rom i think it s on my pc.if you need tell me
sudf said:
when you put your universal on usb with a pc on xp there is a detection? or not and are you sur that there isn t any write on the screen .
because i have the same pb in 2006 an ithink that my universal is dead an aftrer 2 day i put the universal on the light and i see v101 if you don t see to the light you don t see it because the backlight don t work.
in this case the led for the charging don t work to.
if you have this there is a solution with a free operator rom i think it s on my pc.if you need tell me
Click to expand...
Click to collapse
Thanks
It do not enter boot loader with light + power + reset and show no signs of life.
The light is off.when i push reset button flash the red light.
When connected to USB, PC reports "USB device not recognised"
I want a original rom for qtek9000 for test.
Anybody have this rom?
When I bricked my XDA Exec by means of hung program during the upgrade, I had: no reaction to normal Reset, no entry to Bootloader - basically a brick.
I did LeftSoftKey + RightSoftKey + Reset to do a *hard* reset (everything was lost anyway), and after that I could see "Serial... v1.01" Bootloader notification. When you connected that to a computer, it changed to "USB... v1.01" prompt.
So I just took JWright's image, and re-flashed it.
Guess what? It detected I had no image/extRom/RadioRom whatsoever then offered to re-flash them. I knew I'm OK when Radio upgrade progress indicator started to move.
It took me to get to another machine first, however. My Vista machine totally screwed up things, whereas my home XP managed to do the job.
Sitting on JWright's 2.02.02 now - very thoroughly made ROM, love Voice Command integrated with it instead of crappy Cyberon's software.
I have attached .pdf since I am not good at formatting in html here. I have suffered with this phone for two weeks before I got it working again. So, thought I should share it everyone.
Added some more informations. Will attach some pictures soon.
banglastyle said:
I have attached .pdf since I am not good at formatting in html here. I have suffered with this phone for two weeks before I got it working again. So, thought I should share it everyone.
Click to expand...
Click to collapse
Awesome u are the best..!!
Mastermind_hassan said:
Awesome u are the best..!!
Click to expand...
Click to collapse
Did you get your phone back to life?
banglastyle said:
Did you get your phone back to life?
Click to expand...
Click to collapse
Absolutely.!!
You are a miracle worker! Took some time but it finally worked! Thank you!!!!!!
banglastyle said:
I have attached .pdf since I am not good at formatting in html here. I have suffered with this phone for two weeks before I got it working again. So, thought I should share it everyone.
Added some more informations. Will attach some pictures soon.
Click to expand...
Click to collapse
THANK YOU! You saved my phone. I can only get it to flash the Wind mobile version but that is a great start and my phone is usable now.
banglastyle said:
I have attached .pdf since I am not good at formatting in html here. I have suffered with this phone for two weeks before I got it working again. So, thought I should share it everyone.
Added some more informations. Will attach some pictures soon.
Click to expand...
Click to collapse
many thanx
only v11h worked out (link here http://forum.xda-developers.com/showthread.php?t=1594396)
My problem is that I'm able to go in NVFlash mode and do the G2X_V21E_00_NVFlash or the One-Click-G2x-recovery but when I try the S/W Upgrade mode, the G2x screen show me the S/W Update image but no devices are found in Windows XP.
I tried with different cables and different PC (even MAC) but no sign of any device connected.
Of course the drivers are installed, if I connect the phone when Android boot up all the devices (modem, serial port, USB...) are properly found.
I probably have an half bricked USB port (I just replaced the hardware connector board, so HW is not the issue) since when the phone is running Android I'm not able to charge it.
To re-enable the charge I go in the hidden menu (1809#*999#) and switch Port Settings> from AP USB to AP UART
I really think is a BaseBand problem (I'm stuck with MAR 27 2011) but without S/W Update working I'm not able to update it!
Someone have suggestions?
Thanks.
fostrike said:
My problem is that I'm able to go in NVFlash mode and do the G2X_V21E_00_NVFlash or the One-Click-G2x-recovery but when I try the S/W Upgrade mode, the G2x screen show me the S/W Update image but no devices are found in Windows XP.
I tried with different cables and different PC (even MAC) but no sign of any device connected.
Of course the drivers are installed, if I connect the phone when Android boot up all the devices (modem, serial port, USB...) are properly found.
I probably have an half bricked USB port (I just replaced the hardware connector board, so HW is not the issue) since when the phone is running Android I'm not able to charge it.
To re-enable the charge I go in the hidden menu (1809#*999#) and switch Port Settings> from AP USB to AP UART
I really think is a BaseBand problem (I'm stuck with MAR 27 2011) but without S/W Update working I'm not able to update it!
Someone have suggestions?
Thanks.
Click to expand...
Click to collapse
I have exactly the same situation, in S/W Update mode no devices are found by Windows, but when boot in Android all devices are found. If you found some solution please publish.
Thank you, Guide worked on my dead phone. Now is live.
I was only able to revive it to the Canadian software and baseband but I already sold my phone so I'm off to bigger and better devices hahahaha
Sent from my SAMSUNG-SGH-T989 using xda premium
thank you this will come in handy
I've had my G2x for a while now had many bugs and lags at start but with ICS Roms i am liking my phone !
banglastyle said:
I have attached .pdf since I am not good at formatting in html here. I have suffered with this phone for two weeks before I got it working again. So, thought I should share it everyone.
Added some more informations. Will attach some pictures soon.
Click to expand...
Click to collapse
I have to thank you for this as it saved my new phone.
thanks a lot
Subtleone said:
I have to thank you for this as it saved my new phone.
Click to expand...
Click to collapse
Finally my partially working G2x is restored to working condition but as mention by others i could only flash the Wind mobile baseband. Even though its usable, the voice quality isn't much clear.
Any suggestions for improving that?
will this work on lg lte lu6200? its dead ive flash a wrong kernel... wont turn on, not charging.. no power or lights at all.
When holding vol up+down and plugging it into my comp, s/w upgrade does NOT pop up :/
I tried the fridge trick; didn't work.
Help?
no s/w upgrade screen
exaphor said:
When holding vol up+down and plugging it into my comp, s/w upgrade does NOT pop up :/
I tried the fridge trick; didn't work.
Help?
Click to expand...
Click to collapse
Holding both buttons vol up + down and plugging in the computer while the battery is out is to install the apx drivers i.e nvidia drivers. It is supposed to remain black. not having s/w upgrade screen is not an issue.
dear, pls i need your help. i flashed preloader and now my phone is dead, i want to try meta mode because my pc is only showing comport when i connect my phone (no vcom). its a galazy A9 6 clone. i found kpcolo and wanted to know if its the same as kcolo / colo? i'd be very gratefull if u can help me out here
Guys My nexus 5's battery was fully discharged after that when im try to charge it its just not booting up. Also when i connect it to the PC i can hear the sound of it getting connected from pc speakers but the screen is not powering up. Can anyone plz help me up ?
Edit : When i connect my deive it is shown as QHSUSB_BULK in device manager.
Can you access bootloader? Hold down power button+vol down button together till you feel a vibration... If nothing shows up then
Leave it on a wall charger for 2-3 hours and see whether it boots up or not...
if not, it's most probably a hardware failure... We would be able to do something or the other if you could just reach to the bootloader, if not, it's dead...
vin4yak said:
Can you access bootloader? Hold down power button+vol down button together till you feel a vibration... If nothing shows up then
Leave it on a wall charger for 2-3 hours and see whether it boots up or not...
if not, it's most probably a hardware failure... We would be able to do something or the other if you could just reach to the bootloader, if not, it's dead...
Click to expand...
Click to collapse
Mate when i connect my device to the PC the device manager shows it as QHSUSB_BULK
I have attached the pic in the opening post
anshmiester78900 said:
Mate when i connect my device to the PC the device manager shows it as QHSUSB_BULK
I have attached the pic in the opening post
Click to expand...
Click to collapse
QHSUSB_BULK means that your phone is hard bricked.
Simonna said:
QHSUSB_BULK means that your phone is hard bricked.
Click to expand...
Click to collapse
Is it true ? That means no way to recover it ?
anshmiester78900 said:
Is it true ? That means no way to recover it ?
Click to expand...
Click to collapse
Yes,April 1st is ended,lol. Unfortunately,if you can't go into recovery or bootloader there is only one way to fix it - to change motherboard.
anshmiester78900 said:
Mate when i connect my device to the PC the device manager shows it as QHSUSB_BULK
I have attached the pic in the opening post
Click to expand...
Click to collapse
It means eMMC is fried.. motherboard needs to be replaced! RMA it asap... Good Luck with the RMA and do keep us posted!
Simonna said:
Yes,April 1st is ended,lol. Unfortunately,if you can't go into recovery or bootloader there is only one way to fix it - to change motherboard.
Click to expand...
Click to collapse
vin4yak said:
It means eMMC is fried.. motherboard needs to be replaced! RMA it asap... Good Luck with the RMA and do keep us posted!
Click to expand...
Click to collapse
Ohh well it's really sad then
Simonna said:
Yes,April 1st is ended,lol. Unfortunately,if you can't go into recovery or bootloader there is only one way to fix it - to change motherboard.
Click to expand...
Click to collapse
vin4yak said:
It means eMMC is fried.. motherboard needs to be replaced! RMA it asap... Good Luck with the RMA and do keep us posted!
Click to expand...
Click to collapse
Guys the thing is i cannot rma it as i have bought it from USA ! Is there anything that i can do it recover it ?
anshmiester78900 said:
Guys the thing is i cannot rma it as i have bought it from USA ! Is there anything that i can do it recover it ?
Click to expand...
Click to collapse
Aaarrghh... That's bad...
You can't do anything to fix it.. The motherboard needs to be changed. Your best bet would be to send the phone to a friend/relative living in the US and tell them to RMA it for you. You obviously will need a proper google play receipt to confirm that the order is legit (from playstore)...
vin4yak said:
Aaarrghh... That's bad...
You can't do anything to fix it.. The motherboard needs to be changed. Your best bet would be to send the phone to a friend/relative living in the US and tell them to RMA it for you. You obviously will need a proper google play receipt to confirm that the order is legit (from playstore)...
Click to expand...
Click to collapse
ohk mate , seems like im totally mesed up
anshmiester78900 said:
ohk mate , seems like im totally mesed up
Click to expand...
Click to collapse
Its not your fault, its a hardware faillure and it can happen to anyone , good luck mate
gee2012 said:
Its not your fault, its a hardware faillure and it can happen to anyone , good luck mate
Click to expand...
Click to collapse
Yes mate it's just all about luck .
anshmiester78900 said:
Yes mate it's just all about luck .
Click to expand...
Click to collapse
hold volume down while connecting to pc with usb cable. any sign?
samersh72 said:
hold volume down while connecting to pc with usb cable. any sign?
Click to expand...
Click to collapse
wait let me try it
samersh72 said:
hold volume down while connecting to pc with usb cable. any sign?
Click to expand...
Click to collapse
No mate no sign at all also it has stopped showing the QHSUSB_BULK in device manager
anshmiester78900 said:
No mate no sign at all also it has stopped showing the QHSUSB_BULK in device manager
Click to expand...
Click to collapse
did you try holding power for more than 10 seconds?
try also with volume up while connecting to pc.
if no fastboot mode, no download mode. sorry, i guess it is completely dead
take a look here at some users posts
samersh72 said:
did you try holding power for more than 10 seconds?
try also with volume up while connecting to pc.
if no fastboot mode, no download mode. sorry, i guess it is completely dead
take a look here at some users posts
Click to expand...
Click to collapse
Yes mate i have tried it and i think its now dead :'(
Thanks 4 the help by the way
Sorry
anshmiester78900 said:
Yes mate i have tried it and i think its now dead :'(
Thanks 4 the help by the way
Click to expand...
Click to collapse
Sorry for your loss I just got my new RMA nexus 5 very similar situation, was nearly dead battery put it on my Nokia wireless charger as I do every night awoke to Google and unlock icon, no boot after that no matter what I tried I lost a lot of data as I had not backed up. I freely admit using exposed modules but have never had any issues beyond the occasional reboot (common error if you search). Lucky I have my nexus 4 as a backup but disappointed. Enough about me I wanted to tell you the RMA process could not have been easier if you some how purchased through Google play they will hook you right up. Good luck
B1663R said:
Sorry for your loss I just got my new RMA nexus 5 very similar situation, was nearly dead battery put it on my Nokia wireless charger as I do every night awoke to Google and unlock icon, no boot after that no matter what I tried I lost a lot of data as I had not backed up. I freely admit using exposed modules but have never had any issues beyond the occasional reboot (common error if you search). Lucky I have my nexus 4 as a backup but disappointed. Enough about me I wanted to tell you the RMA process could not have been easier if you some how purchased through Google play they will hook you right up. Good luck
Click to expand...
Click to collapse
Alright mate.
Thanks for the tips !
Hi Guys,
I had installed Exodus 0607 build and less than a day into the ROM it went into bootloop..
as i was able to enter recovery, i reflashed the Current build that time was 0609, so again less than a day into it AGAIN.
The phone was at 3% when i switched it off as i could not get the OPO charger to charge the device, after that the phone was completely drained out.. i kept on charging with the OPO charger.. did not work, i pressed power 20 secs for 5 times did not work.
did not work the other method of:
switch off for 12 hours and recharge for 6 hours.. (both done approx)
but no help.
is there any work around on this?
im desperate to use the device..
this is the 3rd day almost..
please help!!
rhn345 said:
Hi Guys,
I had installed Exodus 0607 build and less than a day into the ROM it went into bootloop..
as i was able to enter recovery, i reflashed the Current build that time was 0609, so again less than a day into it AGAIN.
The phone was at 3% when i switched it off as i could not get the OPO charger to charge the device, after that the phone was completely drained out.. i kept on charging with the OPO charger.. did not work, i pressed power 20 secs for 5 times did not work.
did not work the other method of:
switch off for 12 hours and recharge for 6 hours.. (both done approx)
but no help.
is there any work around on this?
im desperate to use the device..
this is the 3rd day almost..
please help!!
Click to expand...
Click to collapse
Does it show up with you connect it to your PC?
nope, unknown device......
to be precise..
usb device not recognised
Heisenberg said:
Does it show up with you connect it to your PC?
Click to expand...
Click to collapse
usb device not recognised
rhn345 said:
usb device not recognised
Click to expand...
Click to collapse
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
Heisenberg said:
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
You can now proceed to install unsigned drivers from the file you downloaded. Open Device Manager, you should be seeing ugly yellow warning under other devices for QHUSB_BULK. Right click on the name and select Update Driver Software > Browse my Computer for driver software. For driver software location provide the path where you have extracted Qualcomm 2012 drivers you downloaded and make sure 'Include Subfolders' is checked. Proceed through all the installation prompts ignoring any warnings.
Cant see QHUSB_BULK
over there..... will that be fine?
rhn345 said:
You can now proceed to install unsigned drivers from the file you downloaded. Open Device Manager, you should be seeing ugly yellow warning under other devices for QHUSB_BULK. Right click on the name and select Update Driver Software > Browse my Computer for driver software. For driver software location provide the path where you have extracted Qualcomm 2012 drivers you downloaded and make sure 'Include Subfolders' is checked. Proceed through all the installation prompts ignoring any warnings.
Can see QHUSB_BULK
over there..... will that be fine?
Click to expand...
Click to collapse
Can or can't see it?
Heisenberg said:
Can or can't see it?
Click to expand...
Click to collapse
Sorry i am too sleepy for this BS typos.. its 4 Am here...:/
CANT SEE IT ..
rhn345 said:
Sorry i am too sleepy for this BS typos.. its 4 Am here...:/
CANT SEE IT ..
Click to expand...
Click to collapse
Ok, it's probably best to ask for help from netbuzz in the unbrick thread.
Heisenberg said:
Ok, it's probably best to ask for help from netbuzz in the unbrick thread.
Click to expand...
Click to collapse
so i should not go along with the process for now?
rhn345 said:
so i should not go along with the process for now?
Click to expand...
Click to collapse
If it isn't doing what it's meant to, no, I'd ask for help first.
Heisenberg said:
If it isn't doing what it's meant to, no, I'd ask for help first.
Click to expand...
Click to collapse
hope he answers.. i posted there for help agn.
:'(
M still stuck.
No change
Phone isnt getting detected...
Sent from my MB865 using XDA Free mobile app
My friend is using OP6 with stock rom and bootloader locked. He never made any modifications to his phone. Yesterday, he was playing a game and suddenly it went to Qualcomm crash dump mode. After trying several times it was booted in safe mode but crashed again after 10 minutes. I tried to repair it using Msmdownload tool. Everything went fine, tool showed that download was complete. Now, the phone doesn't even turn on. It is just showing black screen from very long time but the notification light is on. I am not even able to go to fastboot mode now. Please help.
Good morning and happy new year( and i guess it didnt start well for your friend) very strange behaviour, maybe you downloaded files for other variant than the phone (64 or 128 or 256 or a6000 or 6003 i dont know i used the tool only with the oneplus one) try to go to qloader mode( if it is like the opo i didnt use it at all ) and try to calm down, put it on charge even if it will not show it and try again that's all i can help with
Edit: just saw the thread about unbricking a'd didnt notice other varient roms only oxygen and hydrogen, be sure that the qualcomm drivers are installed well and try again
Are you sure this isn't a hardware failure?
Chinaroad said:
Good morning and happy new year( and i guess it didnt start well for your friend) very strange behaviour, maybe you downloaded files for other variant than the phone (64 or 128 or 256 or a6000 or 6003 i dont know i used the tool only with the oneplus one) try to go to qloader mode( if it is like the opo i didnt use it at all ) and try to calm down, put it on charge even if it will not show it and try again that's all i can help with
Edit: just saw the thread about unbricking a'd didnt notice other varient roms only oxygen and hydrogen, be sure that the qualcomm drivers are installed well and try again
Click to expand...
Click to collapse
The drivers are installed well and the tool detected the device fine. I used the tool again but still there is no response . Anyways thank you and wish a very happy new year to you too.
Gionikva said:
Are you sure this isn't a hardware failure?
Click to expand...
Click to collapse
Not sure. Anyway to diagnose for hardware problems?
KrishTej said:
The drivers are installed well and the tool detected the device fine. I used the tool again but still there is no response . Anyways thank you and wish a very happy new year to you too.
Not sure. Anyway to diagnose for hardware problems?
Click to expand...
Click to collapse
Send it to oneplus.
Gionikva said:
Send it to oneplus.
Click to expand...
Click to collapse
Turns out it hardware problem. They replaced the motherboard and now it's working fine.