Related
I use handbrake at home to convert videos, but at the moment it seems to be a bit hit and miss when it comes to working it on the Nexus.
I've installed Meridian and Video Player from the market, both read videos the same way.
So I converted 5 videos with no problem, they were relatively short. But when I did a longer conversion (dvd which was 1hr 30) it just didn't like it. Plays on my PC fine.
I cant remember which settings I used, so can anyone recommend what settings to use in handbrake? Or is there better software to convert movies with? Or is there a better media player on the market?
mp4 with h264. If I remember right there is still an iPod profile. The newer version did away with a lot of the profiles but that one should be around. With this screen you do not need to scale down the image but it would help for space.
When I get home I can post more detailed settings if need be.
I'm using Allok Mpeg4 converter at 720x480
i found using handbrake that h.264 doesn't work on the nexus, but the regular mp4 codec does
xtop said:
i found using handbrake that h.264 doesn't work on the nexus, but the regular mp4 codec does
Click to expand...
Click to collapse
Not to be anal but mp4 is a container format (like ogg), not a codec (like vorbis). MPEG-4 part 2 is the "default" visual codec component. In reality it is not anymore. H.264 is also part of the MPEG-4 specification, MPEG-4 part 10 to be precise. In handbrake H.264 is the default for the mp4 container.
I am certain that h.264 can work on the N1. I have a few time wasters I keep on my phone. The more operative question is whether the current handbrake ripping to m4v works for the N1. I am reripping a film right now using the iPhone profile....
And using the iPhone & iPod Touch preset in Handbrake 0.9.4 the rip worked fine. Which preset did you use? Keep in mind some of the higher h.264 profiles might not work on the phone.
Personally I would probably up the picture settings to match the N1's resolution and maybe bump the quality down if worried about space. I was able to play a h.264 set to high settings but I am not sure what the exact settings were. It appears the N1 can handle most, if not all, h.264 profiles.
ive done this, works perfectly with 720p mkv's
HANDBRAKE:
set vid profile to normal,
container: MP4 800 x 480 ,, check the keep aspect ratio, anamorphic off, bitrate 1500
audio AAC, 44.1khz, bitrate 96 stereo
save profile, load file
your jaw is gonna drop if you use these settings and encode a 720p mkv
kscasper13 said:
ive done this, works perfectly with 720p mkv's
HANDBRAKE:
set vid profile to normal,
container: MP4 800 x 480 ,, check the keep aspect ratio, anamorphic off, bitrate 1500
audio AAC, 44.1khz, bitrate 96 stereo
save profile, load file
your jaw is gonna drop if you use these settings and encode a 720p mkv
Click to expand...
Click to collapse
Thanks for the info, gonna try it right now
Just so you have optoins I use Handbrake, just converted American Pie The naked Mile from DVD and it looks good. Here's my settings:
Container: MP4 File
Picture Tab: Set Anamorphic to None
Select Keep Aspect Ratio. It should auto scale the hight to proper hight
Video Tab: Video Codec to MPEG-4
Average Bit Rate to 700. You can use previously recommended 1500 but this will make a large file and I'm not sure you will see the difference in
quality on out small screens.
Audio Tab: Leave everything default accept the Samplerate set to 44.1
Click Start!!!!
kscasper13 said:
ive done this, works perfectly with 720p mkv's
HANDBRAKE:
set vid profile to normal,
container: MP4 800 x 480 ,, check the keep aspect ratio, anamorphic off, bitrate 1500
audio AAC, 44.1khz, bitrate 96 stereo
save profile, load file
your jaw is gonna drop if you use these settings and encode a 720p mkv
Click to expand...
Click to collapse
800x480 with aspect ratio might aswel be 720x480
and the bitrate, as setzer said wont make to big of a difference on a small screen. 768-1024 are fine. 1500 appears to be a random number you chose as typical bitrates go from 768, 1024, 2048 etc
yea you can prolly set the vid bitrate lower, that's just what it was default and the movies come out perfect, i'm still testing other settings.
m00moo said:
800x480 with aspect ratio might aswel be 720x480
and the bitrate, as setzer said wont make to big of a difference on a small screen. 768-1024 are fine. 1500 appears to be a random number you chose as typical bitrates go from 768, 1024, 2048 etc
Click to expand...
Click to collapse
yes it DOES make a difference, since our screen's are 80 pixels wider than 720
t
kscasper13 said:
yes it DOES make a difference, since our screen's are 80 pixels wider than 720
Click to expand...
Click to collapse
u dnt seem to quite understand. a typical video is made to have certain resolutions. obviously by converting a video u wil want to maintain the original aspect ratio, unless of course u dnt mind watching a stretched un porportioned video. that is why most converters have preset res already set to keep those aspect ratios and quality.from what u already said, u are watching a video stretched 80pixels too wide.
16/9 is the closest we have to a ratio standard, and 720x480 doesn't match that.
If your source is more than 800 pixels wide, the best setting is to scale the width down to 800 and let the height scale down proportionately. On a 16/9 video, this will leave very thin black bars on the bottom and top of your phone's screen. If these bother you, you will need to fiddle with Handbrake's crop settings.
If your source is smaller than 800 pixels wide, then you should just leave the resolution the same as the source. Upconverting will not make the picture any better and will just increase the filesize/bitrate.
As for bitrate, I've found that 1000-1500 looks amazing if you are converting HD video, but if you're converting SD then around 750 is sufficient.
A non-widescreen source will leave black bars to the left and right on your phone - you can get around this in two ways - firstly by stretching the picture which looks ugly IMO, or by doing your own cropping of the top and bottom of the picture during conversion.
JanetPanic said:
Not to be anal but mp4 is a container format (like ogg), not a codec (like vorbis). MPEG-4 part 2 is the "default" visual codec component. In reality it is not anymore. H.264 is also part of the MPEG-4 specification, MPEG-4 part 10 to be precise. In handbrake H.264 is the default for the mp4 container.
I am certain that h.264 can work on the N1. I have a few time wasters I keep on my phone. The more operative question is whether the current handbrake ripping to m4v works for the N1. I am reripping a film right now using the iPhone profile....
And using the iPhone & iPod Touch preset in Handbrake 0.9.4 the rip worked fine. Which preset did you use? Keep in mind some of the higher h.264 profiles might not work on the phone.
Personally I would probably up the picture settings to match the N1's resolution and maybe bump the quality down if worried about space. I was able to play a h.264 set to high settings but I am not sure what the exact settings were. It appears the N1 can handle most, if not all, h.264 profiles.
Click to expand...
Click to collapse
you're right, didn't mean to say codec..thanks for correcting me
but it didn't seem to matter what i picked..normal, high profile, ipod touch, etc. anything i encoded to h.264 WON'T play. now maybe i'm overlooking something (likely), but who knows
edit: you handbrake users. do you change the audio settings at all? and do you do 2 pass, and would that help with anything?
i've noticed my encodes get a little blocky here and there, would 2 pass fix that?
kscasper13 said:
ive done this, works perfectly with 720p mkv's
HANDBRAKE:
set vid profile to normal,
container: MP4 800 x 480 ,, check the keep aspect ratio, anamorphic off, bitrate 1500
audio AAC, 44.1khz, bitrate 96 stereo
save profile, load file
your jaw is gonna drop if you use these settings and encode a 720p mkv
Click to expand...
Click to collapse
Brilliant advice, worked a treat! Thanks a lot
m00moo said:
t
u dnt seem to quite understand. a typical video is made to have certain resolutions. obviously by converting a video u wil want to maintain the original aspect ratio, unless of course u dnt mind watching a stretched un porportioned video. that is why most converters have preset res already set to keep those aspect ratios and quality.from what u already said, u are watching a video stretched 80pixels too wide.
Click to expand...
Click to collapse
ggggodddddi i was kidding u doof
and yes i understand bitrate an d resolutions, i went to school for 3d rendering, but thanks for the gradeschool lesson on resolution gates.
tvrf21 said:
Brilliant advice, worked a treat! Thanks a lot
Click to expand...
Click to collapse
no worries buddy, soon ima figure out the cropping settings sop it fills the screen, even though it doesn't bother me one bit
I currently use the following (for 16x9 content)
Code:
ffmpeg -i Input.avi -acodec libfaac -ac 2 -ar 44100 -ab 128k -s 800x450 -vcodec libx264 -b 700k -flags +loop -cmp +chroma -partitions +parti4x4+partp8x8+partb8x8 -subq 5 -trellis 1 -refs 1 -coder 0 -me_range 16 -g 300 -keyint_min 25 -sc_threshold 40 -i_qfactor 0.71 -bt 400k -maxrate 700k -bufsize 400k -rc_eq 'blurCplx^(1-qComp)' -qcomp 0.6 -qmin 15 -qmax 51 -qdiff 4 -level 30 output.mp4
I miss out "-s 800x450" if the source material is under that already, no point scaling it up when the N1 will do it for you. For 4:3 I'd use "-s 640x480"
I use the program Flash to Video PRO, to me has very much helps.
The reason why above poster chose 1500 bitrare when converting from a 720p video is because from what I have found to be the highest bitrate the N1 will support (or all the video players on the market atleast) btw use mVideoPlayer by far the best video player...
I might also add that the latest version of AnyDVD converter has a converting option built in for the nexus ... wich is basically the same as aboves post handbreak settings..
i got some 700mb avi movies and dropped it on my phone. it said it could not play. do i need to resize it or is it an encoder issue? maybe the file size is too big? idk!
thanks
What player are you trying to use?
use rockplayer or vplayer, I had played 2.7gb mkv 720p movie with no issue.
kamesen said:
i got some 700mb avi movies and dropped it on my phone. it said it could not play. do i need to resize it or is it an encoder issue? maybe the file size is too big? idk!
thanks
Click to expand...
Click to collapse
Try the program "handbrake" with high profile settings
Are you using a custom rom? Because I have been watching 700 mb .avi and great big hd .mkv with no problem, on both stock and newest cognition. Only format I HAVE had a problem with is m2ts.
I use PavTube Ultimate Blu-Ray Converter to make Xvid MP4 files out of my discs. They work great on the Captivate. I played around with different settings and there really isn't much visual difference between using the native 800x480 resolution compared to HD rez, but the difference in file size is significant.
I get the same issues with some AVI's in both Rockplayer and the stock player on the stock rom. Haven't tried movies since flashing to Cognition 2.3b7. MKV's don't typically play in rockplayer, the few that have skipped a ton, or they would play with no audio. Not sure what you guys are doing to your movies to make them play. All of my videos are encoded properly, and play on my WD TV Live just fine. The WD is a good test of media quality for rips.
The WD TV Live also can play pretty much any audio and video codec you throw at it.
SlappyMcGee said:
The WD TV Live also can play pretty much any audio and video codec you throw at it.
Click to expand...
Click to collapse
There have been mkv's that have not played correctly on it, so if it's not encoded properly, the WD is a good test, from my experience.
I have some 700mb xvid movies on my phone and they play fine on stock rom w/stock player. But I highly recommend vplayer for video and rtsp watching.
Yep. Gave Handbrake a shot. Works like a charm. Will download vplayer and check it out
thanks fellas
What kind of settings are you guys using for your conversions?
Sent from my SAMSUNG-SGH-I897 using XDA App
followed the settings outlined on this webpage:
http://www.knowyourcell.com/samsung/samsung-captivate/captivate-guides/513592/how_to_convert_videos_and_transfer_them_to_the_samsung_captivate.html
Requirements:
Installed copy of Handbrake software
Video files and or DVD of your choice
Samsung Captivate with microUSB cable
Step I: Launch the Handbrake application on your computer and select the video source
In the menu on the right-hand side, select the iPod Legacy preset (figure 1)
Select your video source by clicking on the Source dropdown menu (we used a DVD for our testing purposes)
Select the destination and name for the file once it has been converted (both the .mp4 and .m4v extension work for the Captivate)
Confirm that the container is set to MP4 File and that Large file size, Web optimized, and iPod 5G support are unchecked
Step II: Adjust Handbrake's Video Settings
Picture Tab:
Uncheck Keep Aspect Ratio
Set the Captivated Width and Height (the Captivate supports a maximum of 800 x 480 pixels)
Video Tab:
Confirm the Video Codec is set as H.264 (x264)
Framerate (FPS) should be set to Same as source
Under Quality, select the Avg Bitrate (kbps) and change it to 1500
Step III: Adjust audio settings
Confirm the Audio Codec is AAC (faac)
Mixdown should be set to Stereo
Change the Samplerate to 48
Change the Bitrate to 160
Step IV: Save as a preset for future use
Click on the Presets menu and select New Preset
Enter Captivate in the dialog box and click Add
"Captivate" will now be saved as a preset and listed on the right hand side in Handbrake to be used in the future
Step V: Convert the video and copy to your Captivate
Click on the Start button in Handbrake
A command line/DOS window will open and start to process the video conversion
Once the conversion is done, mount your Captivate on to your computer via USB
Once mounted, create a folder named Video in the root folder on the Captivate
Copy converted file into the Video folder
That's it! The converted video can now be played on your Captivate using the Gallery app. It should look fantastic on the Captivate's screen as long as the original source was of good quality.
A few things to keep in mind when converting video:
The Captivate does not like video file sizes over 2GB (the settings in Step II should help insure that the file size is kept under 2GB)
Your converted video will only be as good as the source video
If your source is over 800 x 480, you must be sure to set the width and height to a maximum of 800 x 480 as noted in Step II
chirs said:
use rockplayer or vplayer, I had played 2.7gb mkv 720p movie with no issue.
Click to expand...
Click to collapse
ditto. no problems with xvid or mkv files of that size.
i hate converting! all i want is drag, drop and play.. easy as that.
On Assonance 4.3 o/c to 1300 mhz
I actually converted like 20 movies or so for my phone but I dont think Im allowed to post the links to them here lol.
I don't know what went wrong, I can just say I'm running same cog rom you are and so far .mkv, .avi and .mp4 work just fine for me on the stock vid player :-/
Sent from my SAMSUNG-SGH-I897 using XDA App
Tried Handbrake using the settings above and the video was garbage. I'll stick with Pavtube as it converts anything I throw at it in any format without issue and it does Blu-Ray, as well. Looks like 1500 bit rate is the sweet spot for good video quality and manageable file size.
I believe all you have to click is High profile on the right side , that is it
malicenfz said:
I actually converted like 20 movies or so for my phone but I dont think Im allowed to post the links to them here lol.
Click to expand...
Click to collapse
I don't think u would need to convert any vids for the captivate. Captivate by itself plays a variety of formats
Actually, since I'm ripping mostly Blu-Ray discs, they DO need to be converted. And I did a check ripping standard DVD to both mpg2 and mp4. A 50mb mpg2 rip was about 3:40 (min:seconds) whereas the same settings ripped to mp4 was closer to 4:20. Over the span of a complete movie, the mp4 conversion will yield a smaller file size.
What is the best for playing movies? I plan to rip some from Dvds, and wondered what would play best. I am using Vegan 3. I dont know much about divx vs other codecs.
I use mp4 I have 22 video and they only take 20gb of space. I have heard of guys using .mov but I think it is a full 1080 few so it will probably use a lot more space. I think mp4 is only 720 capable
JoeMofknDot said:
I use mp4 I have 22 video and they only take 20gb of space. I have heard of guys using .mov but I think it is a full 1080 few so it will probably use a lot more space. I think mp4 is only 720 capable
Click to expand...
Click to collapse
I want to convert some mkvs and some DVDs to mp4 for an up coming trip, has anyone used handbrake? If so what profile or preset are you using?
jamesgf said:
I want to convert some mkvs and some DVDs to mp4 for an up coming trip, has anyone used handbrake? If so what profile or preset are you using?
Click to expand...
Click to collapse
Handbrakes stock settings work fine for me I tried anyvideoconverter but converted files gave corrupt error
Depends on the source. DVD = standard video, so I would actually recommend Xvid in an AVI container. They play very nicely, plus it's a pretty standard format. And for problematic AC3 audio, you can use an app like Rockplayer. MKV also works nicely in Rockplayer. Or you can even encode to MP4 if you want iPod / iPad compatibility.
For High-Def, I would personally recommend MP4 (h263), only because h264 is so problematic. I use Handbrake and then alter the iPad Profile from h264 to MP4 (h263) and it works very nicely on our device. Yes, it's not "standard" so my files are really only for this device or my PC.
I'm not an expert on video formats or ripping/converting. However, I've spent the last couple of days (off and on) trying to find the best way to get vids on the gTab. As of this morning, the best option I've found is using Pazera. I used the "Video to iPod" converter with the following settings:
Output file format
MP4 (MPEG-4/AAC)
Bitrate: 1000 kbit/s
FPS: 30
Audio - Left it in "Auto"
Advanced Settings
Resolution: 1280 x 720 - HD720
The quality looks really good. No issues with the audio either. My only problem is the file size is 1.2GB. The vid I converted was 2 1/2 hours but I still think I want the file size around 500 to 700MB. I'm going to adjust the settings some more and see if I can find the balance between video quality and file size. It just takes an hour or so to convert it so this may take a few days.
I hope this is helpful to everyone. If anyone else has any experience with Pazera and can recommend good settings, I'm all ears!
Sly Soft's AnyDVD to rip and them AnyDVDMobile to convert (I use ipad's default settings on the mobile conversion and they work great - I use those settings b/c I my kids use the same rips for the ipod touch and it comes out as something they all can use (rather than keeping multiple copies for each device).
I have been using this to convert HD video into something the hardware decoder can play without issue:
Code:
INPUT="My_movie.mkv"
OUTPUT="My_movie-gtab.mp4"
ABITRATE=64k
VBITRATE=1500k
RESIZETO="-s 1024x576"
ffmpeg -strict experimental -y -i $INPUT -f mp4 $RESIZETO -vcodec libx264 \
-vpre default -vpre ipod640 -acodec aac -ab $ABITRATE \
-ac 2 -b $VBITRATE -threads 0 $OUTPUT
1000k for the video bitrate would net you about 480M/hour, with 1500k at about 700M/hour (which is fine by me).
The RESIZETO will work for 720p and 1080p content as it's resizing for the longer width. If you have SD content (DVDs) just comment out the RESIZETO. If you have something that is anamorphic (check ffmpeg -i $FILENAME) you will need to do your own math, or just leave it and up the bitrate. A good rule of thumb for high quality is:
0.14 * Height * Width * frames/sec
So 0.14 * 576 * 1024 * 29.97 = 2477260bps, or ~ 2500k, about 1.1G/hour
adjusting the number downward will reduce quality, but it's a choice between video quality and size at this point.
I have tested this with a few videos (Big Buck Bunny, originally 1080p content) and with some 720p videos. 1500k worked out really well.
Great info ckelly33 and ckelly. I'm starting to think the question is more on "what are the acceptable formats". Everyone is different and the output they are looking for is just as different. I'm still trying for 500 to 700MB.
I tried again and I think I've got it like I want it. Need to test it some more. On the last conversion I noticed a button for max file size. That got me right where I want to be!
ima_UNC_fan said:
Great info ckelly33 and ckelly. I'm starting to think the question is more on "what are the acceptable formats". Everyone is different and the output they are looking for is just as different. I'm still trying for 500 to 700MB.
I tried again and I think I've got it like I want it. Need to test it some more. On the last conversion I noticed a button for max file size. That got me right where I want to be!
Click to expand...
Click to collapse
So far, It has accepted mp4 and avi containers (I prefer mp4), as well as mp3/aac for audio and h.264(main profile). Reports from roebeet says h.263 works as well. I have not tested xvid yet. I had issues with ac3 audio, so I don't think it supports that.
Of all of those, h.264 is a very very high quality codec, so I would recommend trying to use h.264/aac for encoding if at all possible.
I tried RockPlayer Lite and some other players in the market but none work.
Please help.
vitalplayer?
Try doubletwist. Plays mp4
junks2010 said:
I tried RockPlayer Lite and some other players in the market but none work.
Please help.
Click to expand...
Click to collapse
It's not really just a question of what player - it's a question of what 1080p mp4 files too. Tegra 2 is extremely limited in what it will play back in a 1080p mp4 so how the mp4 is encoded matters as well. I think I read somewhere that it's baseline profile only...and that's with hardware acceleration. Software only, I'm guessing that no file of that size will play - it's too many pixels to push around.
And Rockplayer is my mp4 player of choice (to the extent I actually registered for it to get rid of the ads and the R). In hardware mode, it doesn't bat an eye at my 720p mp4s in main profile.
Judo Jeff said:
It's not really just a question of what player - it's a question of what 1080p mp4 files too. Tegra 2 is extremely limited in what it will play back in a 1080p mp4 so how the mp4 is encoded matters as well. I think I read somewhere that it's baseline profile only...and that's with hardware acceleration. Software only, I'm guessing that no file of that size will play - it's too many pixels to push around.
And Rockplayer is my mp4 player of choice (to the extent I actually registered for it to get rid of the ads and the R). In hardware mode, it doesn't bat an eye at my 720p mp4s in main profile.
Click to expand...
Click to collapse
x2. If the 1080p video is encoded the right way, even the vanilla player will play it.
I've been using h263 1080p / 720p MP4's and they work well. Even some MKV's will work with the vanilla player, if encoded a certain way.
roebeet said:
x2. If the 1080p video is encoded the right way, even the vanilla player will play it.
I've been using h263 1080p / 720p MP4's and they work well. Even some MKV's will work with the vanilla player, if encoded a certain way.
Click to expand...
Click to collapse
Any luck getting h264 1080p to play? Any specific software you recommend to convert files to appropriate encoding?
I've had success in the past doing it and watching 1080p .mov movie trailers but haven't done so since I've upgraded to TnTLite 5.0. I would recommend Handbrake for encoding and then playing with it. From using Mediainfo on them, I think they were Level 4.1 main profile with 2 reference frames, no Cabac.
I found this on fudzilla from google (I can provide a link if needed)
First of them is H.264 with sub standards Baseline Profile (B frames) — 1080p/20Mbps, Main Profile (B Frames, CAVLC) — 1080p, Main Profile (B Frames, CABAC, no weighted prediction) — 720p/6Mbps and High Profile (B Frames, CABAC, no weighted prediction).
Tegra 2 also supports High Profile (B Frames, CABAC, no weighted prediction), MPEG-4 (Simple, B frames and ASP Profiles) — 1080p/8Mbps, H.263 (Profile 0) — 720×576/4Mbps, DiVX (DiVX 4/5) — 1080p/8Mbps, XviD (XviD Home Theater) — 1080p/8Mbps, MPEG-2 (Main Profile @ Main Level) — 720×576/10Mbps, VP6 (simple and advanced profile) — 720p30/2Mbps, Sorenson (simple and advanced profile) — 720×576/4Mbps, JPEG up to 80 Mpixel per second.
Click to expand...
Click to collapse
Caveat - 1080p encoding is slow and the files are big. Unless you are doing 1080p encoding for some other purpose, I wouldn't do it just to play on the G-Tab. It really seems to be stretching the limits of the technology. I prefer to do a really good quality 720p encode instead. They look equally good on the G-Tab at a smaller file size - and on a 60" plasma I still can't tell that they're worse. I had floated my encode parameters for handbrake somewhere back in this section.
vitalplayer, vanilla player? What is better, what supports more formats and it is more convenient?
absorbers said:
vitalplayer, vanilla player? What is better, what supports more formats and it is more convenient?
Click to expand...
Click to collapse
The only luck I've had with hardware accelerated video (the high-def stuff) is Rockplayer or vanilla player. Don't like the lack of file browsing you get with the vanilla player. You can get around that by using a file explorer to open your videos instead of the gallery.
I have a couple of mkvs that Rockplayer won't play (SD ones at that), so maybe an experiment is in order!
Hey all;
So, I've had my Eee Pad for a few months now. Absolutely love it. One of the things that I'm aiming to do, is movie playback for road trips. Myself or my wife (whoever is passenger) can watch a movie, while streaming the audio through the car via Bluetooth (FordSync).
I had converted a couple of movies from HD MKVs (720p and 1080p) to MP4 for playback on my tablet using Handbrake and they played fine. Even HD (720p) music videos I've ripped from YouTube playback OK once converted, however any of my 420p (DVD) rips don't want to playback properly. The video is 2-4 times faster than it should be. I've Googled, and even done some searching on these forums, but the threads regarding fast video playback didn't apply to the Eee Pad.
I'm still on stock ROM, but updated to the latest one (3.1 I think it is). I've tried the built in video player, as well as a couple of others (current one installed is mVideoPlayer).
My Handbrake settings are as follows:
Picture
Keep Aspect Ratio
Anamorphic: None
Modulus: 16
Video Filters
All off
Video
Video Coded: H.264 (x264)
Framerate (FPS): Same as source
(Video)Quality
Avg Bitrate (kbps): 2200
Audio
Audio Coded: AAC (faac)
Mixdown: Stereo
Sample Rate: Auto
Bitrate: 160
DRC: 0.0
Advanced
Encoding
Reference Frames: 1
Maximum B-Frames: 0
Analysis
Motion Estimation Method: Uneven Multi-Hexagon
Subpixel ME & Mode Decision: 6: RD in I/P-frames
Motion Estimation Range: Default (16)
If the video has a 1080 resolution, I usually bring it down to 720 as it plays back better. If its an SD film, I leave the resolution/aspect ratio to whatever the video is encoded as.
Any help is greatly appreciated!!
Some things to try:
Go here build.handbrake.fr and download the latest SVN Handbrake GUI (Not CLI) and install it. It's possible that it is a bug in the latest official version that has been fixed.
Second, rather than using your own settings which may have inadvertently switched some switch - use the High Profile preset and encode this way. It should be automatic, but use Constant Quality = 20 instead of average bit rate as well. These are settings that are known working on mine and other devices.
Try that and report back.
sassafras
How are you ripping the DVDs? If you're just re-converting the .VOB files, that might be the cause depending on if Handbrake can properly read the d2v info embed in VOB files and properly inverse-telecine the DVDs. This will explain why seems to play 2x faster as the timecode is not read properly by handbrake.
sassafras_ said:
Some things to try:
Go here build.handbrake.fr and download the latest SVN Handbrake GUI (Not CLI) and install it. It's possible that it is a bug in the latest official version that has been fixed.
Second, rather than using your own settings which may have inadvertently switched some switch - use the High Profile preset and encode this way. It should be automatic, but use Constant Quality = 20 instead of average bit rate as well. These are settings that are known working on mine and other devices.
Try that and report back.
sassafras
Click to expand...
Click to collapse
I did 4 movies, one I ripped myself, the other 3 I've had for years which I downloaded. Aside from some granyness in the videos now (I'm going to re-try with the 2-pass encode) they played perfectly. Thank you!!
frosty5689 said:
How are you ripping the DVDs? If you're just re-converting the .VOB files, that might be the cause depending on if Handbrake can properly read the d2v info embed in VOB files and properly inverse-telecine the DVDs. This will explain why seems to play 2x faster as the timecode is not read properly by handbrake.
Click to expand...
Click to collapse
Once I ripped the movie using AnyDVD, I'd throw it in to Handbrake and use the HighProfile setting. I'd set the aspect ratio to be the same as that of the movie, 2-pass encode with a turbo first pass, set the audio to be the 5.1 track as passthrough, no chapters, and the rest of the settings as the default for the profile. The original ripped videos play fine on my PC, and even the re-encoded ones played fine as well.