Database Info

Which best software for X10i full screen video conversion

hey guys
tell me which is the best software for X10i full screen video convertor..
i want software which convert video to full screen ...for my x10i
thank you

i use this

realunited123 said:
i use this
Click to expand...
Click to collapse
Is that converter fast? Cause all of the video converters seem to take very long.. How long on avg will it take to convert 1hr of video?

realunited123 said:
i use this
Click to expand...
Click to collapse
thanks
i will try it

Imtoo HD is best for me, can setup 854x480 full screen.
Sed from my X10i @BKK

With Rockplayer from the Android Market you woun't ever have to convert a video again. It plays all formats including mkv out of the box!
Sent from my X10i using Tapatalk

I use SUPER ©

Yes use Rockplayer
After second "Rockplayer" - it really does away with having to spend hours converting "most" movies

somebody really still converting?

Yes, I still do it, because movies take less space on my SD card once they are in MP4 (with the right format) instead of original format.
I cannot change movies every nigth, I have to store 6 or 7 for the week... (and music, and pictures, and...)

thank you
thank you guys
i will try it all..
and yaa instead of direct copy i prefer to convert it becoz it take less memory on my SD card thats why

but you can save much time with bigger sd-card an the rockplayer...

XperiaX10iUser said:
I use SUPER ©
Click to expand...
Click to collapse
+1 for super and it rocks...

So which media player is good to play HD video in MP4 format? Rockplayer or Super?

Guys,
I have tried handbrake to encode and Rockplayer, realplayer beta to playback the below video clip :
http://www.youtube.com/watch?v=eJPbozRomX4
With no success and the video become stuck when it reached : 2:44
Let me know if anyone can overcome this problem, thanks.

chongbh said:
So which media player is good to play HD video in MP4 format? Rockplayer or Super?
Click to expand...
Click to collapse
SUPER is NOT a media player, its a video converter to use in your PC.

on my X10i (unbranded) the SE Mediascape video player plays better than Rock player, the sound is in sync more than Rock player for example.
I have also used "IM TOO" but found it very slow. (1.5 hours to encode a 30 minute episode of Alan Partridge.
I now use WinX DVD Ripper winxdvd d0t c0m (no I dont work for them).
If this is spyware or whatever please let me know, but in encodes a DVD film in 45 mins (even a Disney one with all that special encoding)
My question is....
"what is the ultimate setting for encoding a DVD to MP4 for the X10i?
Please do not reply if you are just guessing, the X10i does not like frame rate 30 for example..
thanks

x2 on using Super as the video convertor. It's free and it offers more features than most other video convertors.
but with RockPlayer (and yxplayer for some files) I no longer need to convert. my 16gb only stores documents, some pictures, and videos but no mp3 since i'd rather listen to streaming internet radio than download mp3s.
the "best" video setting will depend on how you rate video quality. imo, for smoothness and when you are watching movies, i'd go with 23 fps or less, and have high bitrate but reduced resolution (above half the resolution of the lcd display).
video conversion speeds depends mainly on your video converting settings (format, bitrate, resolution, etc.) and your CPU power, not the software.. just fyi.

I am currently using xmedia recode.
I use the settings for the Motorola Milestone when converting, as for some reason the X10 settings mess the audio up.
Pretty quick, and audio/visual sync is spot on

It doesn't matter what to use.
for example, I convert films from my 720p/1080p hd collection, using parameters, such as 854x480 resolution, 160 kbit audio bitrate and 1000-1200 kbit video bitrate.
And it looks like I watch a real hd video! The picture is perfect! Enjoy
Oh, and I noticed, that it's better to use h264 codecs with *.mkv container than mpeg4 with .mp4 and .avi
RockPlayer is the best for my monster-like videos Avatar with 1200 video bitrate and near 2gb file size works without any lags. This is the power of nice program code (thx for RockPlayer devs) with the connection of Snapdragon processor

watching movies - what do you use to rip/convert?

I have downloaded a few apps trying to convert a ripped DVD (the latest Star Trek flick) to MP4 format. I am looking for something that is freeware. Does anyone have a recommendation?
I tried "Any Video Converter" that I downloaded from CNet, but the formats available don't seem to cover the G-tab. I converted Star Trek using 720x580, but it's too small on the screen. The video plays nice and smooth, though.
The other thing I would "like to have" is a converter that converts all the .VOB files into a single .mp4. Right now I have about 15 .VOB files in a directory. Watching 15 minutes of a movie then having to double-click the next .mp4 isn't ideal. And yes, I tried selecting all of them and executing, but it only plays the first video selected.
Any help or suggestions would be greatly appreciated.

I use DVD Catalyst, and have through many different devices now. It can convert to pretty much any popular format, and it has device profiles, many already preset. If it doesn't have a device preset for your device, you can easily create one. It is payware, but it is not expensive, and have have been very ahppy with its results.

I use Handbrake. It is free, and you can use presets, or can pick your own.

Handbrake works really well and it's default preset seems to be working fine for the tablet (only tried one video so far).
--Bill

Thanks, fellas! Handbrake works great! Exactly what I was looking for.

What settings did you use in Handbrake? I can't seem to get anything to play on this thing.
thanks

I just made sure that I was converting to MP4 format. I think it's the H.264 format.

handbrake
i used these settings..
http://www.funtechtalk.com/motorola...mat-conversion-settings-using-free-handbrake/
however i upped the res, my handbrake topped out at 720 though.. read the whole thing including the comments, something about handbrake and custom cropping, halfway down i think..
-=<> aaron <>=-

I noticed some of the movies I ripped came out with an m4a extension which I couldn't get recognized. Renaming to mp4 had both Rockplayer and the native player play them with no issues. Both DVD rips at default resolution as well as a 720p MKV transcoded with Handbrake at whatever the default setting chose.
--Bill
Sent from my GTablet-TnT-Lite using Tapatalk

I use handbrake as well.
Is there a player with subtitle support?

[Q] Best format for video

What is the best for playing movies? I plan to rip some from Dvds, and wondered what would play best. I am using Vegan 3. I dont know much about divx vs other codecs.

I use mp4 I have 22 video and they only take 20gb of space. I have heard of guys using .mov but I think it is a full 1080 few so it will probably use a lot more space. I think mp4 is only 720 capable

JoeMofknDot said:
I use mp4 I have 22 video and they only take 20gb of space. I have heard of guys using .mov but I think it is a full 1080 few so it will probably use a lot more space. I think mp4 is only 720 capable
Click to expand...
Click to collapse
I want to convert some mkvs and some DVDs to mp4 for an up coming trip, has anyone used handbrake? If so what profile or preset are you using?

jamesgf said:
I want to convert some mkvs and some DVDs to mp4 for an up coming trip, has anyone used handbrake? If so what profile or preset are you using?
Click to expand...
Click to collapse
Handbrakes stock settings work fine for me I tried anyvideoconverter but converted files gave corrupt error

Depends on the source. DVD = standard video, so I would actually recommend Xvid in an AVI container. They play very nicely, plus it's a pretty standard format. And for problematic AC3 audio, you can use an app like Rockplayer. MKV also works nicely in Rockplayer. Or you can even encode to MP4 if you want iPod / iPad compatibility.
For High-Def, I would personally recommend MP4 (h263), only because h264 is so problematic. I use Handbrake and then alter the iPad Profile from h264 to MP4 (h263) and it works very nicely on our device. Yes, it's not "standard" so my files are really only for this device or my PC.

I'm not an expert on video formats or ripping/converting. However, I've spent the last couple of days (off and on) trying to find the best way to get vids on the gTab. As of this morning, the best option I've found is using Pazera. I used the "Video to iPod" converter with the following settings:
Output file format
MP4 (MPEG-4/AAC)
Bitrate: 1000 kbit/s
FPS: 30
Audio - Left it in "Auto"
Advanced Settings
Resolution: 1280 x 720 - HD720
The quality looks really good. No issues with the audio either. My only problem is the file size is 1.2GB. The vid I converted was 2 1/2 hours but I still think I want the file size around 500 to 700MB. I'm going to adjust the settings some more and see if I can find the balance between video quality and file size. It just takes an hour or so to convert it so this may take a few days.
I hope this is helpful to everyone. If anyone else has any experience with Pazera and can recommend good settings, I'm all ears!

Sly Soft's AnyDVD to rip and them AnyDVDMobile to convert (I use ipad's default settings on the mobile conversion and they work great - I use those settings b/c I my kids use the same rips for the ipod touch and it comes out as something they all can use (rather than keeping multiple copies for each device).

I have been using this to convert HD video into something the hardware decoder can play without issue:
Code:
INPUT="My_movie.mkv"
OUTPUT="My_movie-gtab.mp4"
ABITRATE=64k
VBITRATE=1500k
RESIZETO="-s 1024x576"
ffmpeg -strict experimental -y -i $INPUT -f mp4 $RESIZETO -vcodec libx264 \
-vpre default -vpre ipod640 -acodec aac -ab $ABITRATE \
-ac 2 -b $VBITRATE -threads 0 $OUTPUT
1000k for the video bitrate would net you about 480M/hour, with 1500k at about 700M/hour (which is fine by me).
The RESIZETO will work for 720p and 1080p content as it's resizing for the longer width. If you have SD content (DVDs) just comment out the RESIZETO. If you have something that is anamorphic (check ffmpeg -i $FILENAME) you will need to do your own math, or just leave it and up the bitrate. A good rule of thumb for high quality is:
0.14 * Height * Width * frames/sec
So 0.14 * 576 * 1024 * 29.97 = 2477260bps, or ~ 2500k, about 1.1G/hour
adjusting the number downward will reduce quality, but it's a choice between video quality and size at this point.
I have tested this with a few videos (Big Buck Bunny, originally 1080p content) and with some 720p videos. 1500k worked out really well.

Great info ckelly33 and ckelly. I'm starting to think the question is more on "what are the acceptable formats". Everyone is different and the output they are looking for is just as different. I'm still trying for 500 to 700MB.
I tried again and I think I've got it like I want it. Need to test it some more. On the last conversion I noticed a button for max file size. That got me right where I want to be!

ima_UNC_fan said:
Great info ckelly33 and ckelly. I'm starting to think the question is more on "what are the acceptable formats". Everyone is different and the output they are looking for is just as different. I'm still trying for 500 to 700MB.
I tried again and I think I've got it like I want it. Need to test it some more. On the last conversion I noticed a button for max file size. That got me right where I want to be!
Click to expand...
Click to collapse
So far, It has accepted mp4 and avi containers (I prefer mp4), as well as mp3/aac for audio and h.264(main profile). Reports from roebeet says h.263 works as well. I have not tested xvid yet. I had issues with ac3 audio, so I don't think it supports that.
Of all of those, h.264 is a very very high quality codec, so I would recommend trying to use h.264/aac for encoding if at all possible.

[Q] HD playback with no lag...?

Im trying to watch either .mp4 or .mkv but both lag in stock player and moboplayer. Anybody get this to work with zero lag?
Sent from my Transformer TF101 using XDA Premium App

I get no lag using Vital Player.

Popsiclestand said:
I get no lag using Vital Player.
Click to expand...
Click to collapse
Just tried that and it lagged a lot...
Sent from my Transformer TF101 using XDA Premium App

What are the specs on the videos that you are trying to play?
Here is a vid of me using Vital Player on the transformer with a H.264 encoded MP4 and an MKV movie. No lag, no sync issues.
http://vimeo.com/23927515

If the movies you're trying to watch are encoded with High profile then playback will be laggy no matter what on the TF.

Popsiclestand said:
What are the specs on the videos that you are trying to play?
Here is a vid of me using Vital Player on the transformer with a H.264 encoded MP4 and an MKV movie. No lag, no sync issues.
http://vimeo.com/23927515
Click to expand...
Click to collapse
Nice!
Okay I'm a new when it comes ti all these video formats.. all I know is that I get choppy playback
So this handles 1080 but with some tweaks I'm assuming..again, I'm a new at this
Were those movies you converted? Is so you mind writing up a little tutorial
Thanks

For the MKV, I downloaded it was already encoded so I am not sure of its specs, but the playback quality and resolution are excellent even on my desktop's 24" HD monitors.
For the MP4 played at the beginning of the video, that was shot in 1920x1080, brought into Premiere CS5 for editing and exported through Adobe Media Encoder using H.264 at 1280x720.
There are some threads with Handbrake encoding specs on the forums as well.
When using Vital player make sure the Decode Mode settings are set to automatic. It will automatically recognize there is no hardware acceleration (as I understand is normal with the Tegra-2). It will then compensate with "software acceleration". Also in the Video Mode settings I have it set to speed over quality as the performance is better without sacrificing much of the quality to my eye.
With these settings, Vital Player should play just about any video you might download off of a torrent site. I have yet to find a video that does not play well through it. I'm not sure if other users who say it does not work for them have checked the Vital Player settings, if my videos are just not up to the elusive "high profile" they are talking about, or if I just have a rare Transformer that just works, but as you can see in the video it does work for me.

Popsiclestand said:
For the MKV, I downloaded it was already encoded so I am not sure of its specs, but the playback quality and resolution are excellent even on my desktop's 24" HD monitors.
For the MP4 played at the beginning of the video, that was shot in 1920x1080, brought into Premiere CS5 for editing and exported through Adobe Media Encoder using H.264 at 1280x720.
There are some threads with Handbrake encoding specs on the forums as well.
When using Vital player make sure the Decode Mode settings are set to automatic. It will automatically recognize there is no hardware acceleration (as I understand is normal with the Tegra-2). It will then compensate with "software acceleration". Also in the Video Mode settings I have it set to speed over quality as the performance is better without sacrificing much of the quality to my eye.
With these settings, Vital Player should play just about any video you might download off of a torrent site. I have yet to find a video that does not play well through it. I'm not sure if other users who say it does not work for them have checked the Vital Player settings, if my videos are just not up to the elusive "high profile" they are talking about, or if I just have a rare Transformer that just works, but as you can see in the video it does work for me.
Click to expand...
Click to collapse
So you had to encode the mkv or mp4 before playback? So it cant just play them straight up?
Sent from my Transformer TF101 using XDA Premium App

I believe that nearly any video you get is going to need be encoded in some form at some time.
The MKV was more than likely encoded by someone else before I downloaded, but no further encoding was necessary on my end. The MP4 was shot on my own camera (Canon 7D recording at 1920x1080p) and needed to be edited. When you export directly from the timeline in Premiere, it must be encoded to even be usable. For sites like YouTube or Vimeo to even accept them there must be encoding. The H.264 encoding that I used is the highest setting for that type of video's purpose (HD web playback). It is different than what I would have exported for burning to Blu-Ray but is adequate for a screen the size and resolution of the Transformer's.
When I return home, I will try bringing in the raw, unedited video from the 7D (which is around 3GB for a 4 minute vid at that resolution btw) and see if Vital Player plays it back with no lag. I seriously doubt it as some average computers have a hard time playing that back without lag. Even Final Cut Pro can't import raw 7D video without a conversion (Adobe Premiere does not have this problem though). Why anyone would want to play a video of this size and resolution on a tablet is beyond me (3GB for 4mins is ridiculous in a playback form). I can't even imagine wanting to watch a full length movie in that form.
Both of these videos seriously choke in any player other than Vital Player (including Mobo, QQ, and MVideo). I couldn't play any video in my library with them or the stock player, but all of these files play just fine in Vital.

I'm playing 720p with no problem
converted with Handbreak. Settings below.
container: "mp4" everything else turned off
picture: "1280x720"
video: "h.264 (x264)"
target size as least as large as the source
advanced: reference frames = 4
b-frames = 0
I'm using moboplayer and downloaded some sort of codec pack (the player prompted me the first time and opened the app store). The default player also works.

AtomicAge said:
I'm playing 720p with no problem
converted with Handbreak. Settings below.
container: "mp4" everything else turned off
picture: "1280x720"
video: "h.264 (x264)"
target size as least as large as the source
advanced: reference frames = 4
b-frames = 0
I'm using moboplayer and downloaded some sort of codec pack (the player prompted me the first time and opened the app store). The default player also works.
Click to expand...
Click to collapse
Maybe that's all I was missing for the other players (I didn't get prompted to download codecs). I'll stick with Vital Player though simply because it's already on my tablet and it works.

Popsiclestand said:
Maybe that's all I was missing for the other players (I didn't get prompted to download codecs). I'll stick with Vital Player though simply because it's already on my tablet and it works.
Click to expand...
Click to collapse
Ive tried lots of different players and anything i download from BitTorrent (.mkv which I convert to MP4 for my Xbox) won't play worth a damn on my transformer. They are all720p. They all lag like crazy. Can the transformer not handle this?
Sent from my Transformer TF101 using XDA Premium App

tsatrom said:
Ive tried lots of different players and anything i download from BitTorrent (.mkv which I convert to MP4 for my Xbox) won't play worth a damn on my transformer. They are all720p. They all lag like crazy. Can the transformer not handle this?
Sent from my Transformer TF101 using XDA Premium App
Click to expand...
Click to collapse
90% of all HD videos you download the internet are ripped from blu-ray and likely encoded with high profile h264 because that's what looks best. the tegra 2 cannot handle these files at 720 or 1080p, and thus they need to be re-encoded to main profile, which as i understand it, means a much lower bitrate (and thus worse picture).

you can read more about it here
http://forum.xbmc.org/showthread.php?t=98211 (bottom of page)
http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC#Profiles

fakeyfakerson said:
you can read more about it here
http://forum.xbmc.org/showthread.php?t=98211 (bottom of page)
http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC#Profiles
Click to expand...
Click to collapse
Thanks guys
Sent from my Transformer TF101 using XDA Premium App

I got all excited because of this thread...but I just gave VitalPlayer a shot on a 720p high profile x264 and it still sucks. No artifacts but the framerate is really low it seems.
In case anyone is interested I did receive this message from ASUS:
"On this issue, we have tested some of the 1080p video is playing well. We have cooperation with google and will launch android 3.1 in June to resolve the 720p and 1080p video playback problems."
We'll see...

GetLaid said:
I got all excited because of this thread...but I just gave VitalPlayer a shot on a 720p high profile x264 and it still sucks. No artifacts but the framerate is really low it seems.
In case anyone is interested I did receive this message from ASUS:
"On this issue, we have tested some of the 1080p video is playing well. We have cooperation with google and will launch android 3.1 in June to resolve the 720p and 1080p video playback problems."
We'll see...
Click to expand...
Click to collapse
i believe that is flash only, as in 720/1080 youtube streaming which is much lower quality than a high profile blu-ray rip. the problem is tegra 2, which is a year old, not supporting 720/1080p playback. it's the reason boxee box dropped tegra for an intel chip.

http://forum.xda-developers.com/showthread.php?t=1060825
this thread seems to do a pretty good job of explaining everything and going through how to get HD vids working

Fast video playback - SD videos

Hey all;
So, I've had my Eee Pad for a few months now. Absolutely love it. One of the things that I'm aiming to do, is movie playback for road trips. Myself or my wife (whoever is passenger) can watch a movie, while streaming the audio through the car via Bluetooth (FordSync).
I had converted a couple of movies from HD MKVs (720p and 1080p) to MP4 for playback on my tablet using Handbrake and they played fine. Even HD (720p) music videos I've ripped from YouTube playback OK once converted, however any of my 420p (DVD) rips don't want to playback properly. The video is 2-4 times faster than it should be. I've Googled, and even done some searching on these forums, but the threads regarding fast video playback didn't apply to the Eee Pad.
I'm still on stock ROM, but updated to the latest one (3.1 I think it is). I've tried the built in video player, as well as a couple of others (current one installed is mVideoPlayer).
My Handbrake settings are as follows:
Picture
Keep Aspect Ratio
Anamorphic: None
Modulus: 16
Video Filters
All off
Video
Video Coded: H.264 (x264)
Framerate (FPS): Same as source
(Video)Quality
Avg Bitrate (kbps): 2200
Audio
Audio Coded: AAC (faac)
Mixdown: Stereo
Sample Rate: Auto
Bitrate: 160
DRC: 0.0
Advanced
Encoding
Reference Frames: 1
Maximum B-Frames: 0
Analysis
Motion Estimation Method: Uneven Multi-Hexagon
Subpixel ME & Mode Decision: 6: RD in I/P-frames
Motion Estimation Range: Default (16)
If the video has a 1080 resolution, I usually bring it down to 720 as it plays back better. If its an SD film, I leave the resolution/aspect ratio to whatever the video is encoded as.
Any help is greatly appreciated!!

Some things to try:
Go here build.handbrake.fr and download the latest SVN Handbrake GUI (Not CLI) and install it. It's possible that it is a bug in the latest official version that has been fixed.
Second, rather than using your own settings which may have inadvertently switched some switch - use the High Profile preset and encode this way. It should be automatic, but use Constant Quality = 20 instead of average bit rate as well. These are settings that are known working on mine and other devices.
Try that and report back.
sassafras

How are you ripping the DVDs? If you're just re-converting the .VOB files, that might be the cause depending on if Handbrake can properly read the d2v info embed in VOB files and properly inverse-telecine the DVDs. This will explain why seems to play 2x faster as the timecode is not read properly by handbrake.

sassafras_ said:
Some things to try:
Go here build.handbrake.fr and download the latest SVN Handbrake GUI (Not CLI) and install it. It's possible that it is a bug in the latest official version that has been fixed.
Second, rather than using your own settings which may have inadvertently switched some switch - use the High Profile preset and encode this way. It should be automatic, but use Constant Quality = 20 instead of average bit rate as well. These are settings that are known working on mine and other devices.
Try that and report back.
sassafras
Click to expand...
Click to collapse
I did 4 movies, one I ripped myself, the other 3 I've had for years which I downloaded. Aside from some granyness in the videos now (I'm going to re-try with the 2-pass encode) they played perfectly. Thank you!!
frosty5689 said:
How are you ripping the DVDs? If you're just re-converting the .VOB files, that might be the cause depending on if Handbrake can properly read the d2v info embed in VOB files and properly inverse-telecine the DVDs. This will explain why seems to play 2x faster as the timecode is not read properly by handbrake.
Click to expand...
Click to collapse
Once I ripped the movie using AnyDVD, I'd throw it in to Handbrake and use the HighProfile setting. I'd set the aspect ratio to be the same as that of the movie, 2-pass encode with a turbo first pass, set the audio to be the 5.1 track as passthrough, no chapters, and the rest of the settings as the default for the profile. The original ripped videos play fine on my PC, and even the re-encoded ones played fine as well.