On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
jimmynotch said:
On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
Click to expand...
Click to collapse
What format is the ring tone in?
My ringtone is the 'Oldphone2' and it is set at'vibrate and ring'. It just spontaneously started this non-ringing thing this morning prompted by no changing of settings. As I said, I tried messing around with the setting after it stopped ringing, but to no avail. And the frustrating thing is that everything else seems to work fine. Argh!
This may seem silly, but have you checked your ring volume? I've had a situation a few times, for no apparent reason after disconnecting from Activesync, where my ring volume was down to 0. Just a thought.
I HAVE SAME PROBLEM, when you turn all to vibrate only and turn it back up . the ring stop working
Yes. all volume settings are up. ringer volume, call volume, media player volume.... Any other suggestions?
i had the same problem just now.. but changing the ringtone back to the ATT default one fixed it. I also use S2U2 and changing the setting for "vibrate when answered" or something like that seems to have fixed it as well.
Hope that helps.
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
jimmynotch said:
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=412418
this happened to me too and i hard resetted. that fixed it , then it started again. come to find out th eproblem was when i hit the volume key on the side i turned system valume up and didnt click on ringer volume to turn it up . i had to smack myself
do texts ringer still work?? if so then im pretty sure you have the same problem i had, check it. good luck though
Do you have the unit face down? It has an auto mute when face down.
I also have an alarm problem, although lights go off, the alarm doesn't ring. I also have problems with ringing on incoming calls. The speaker otherwise works fine. Volumes are turned on appropriately. I have Natfv4.0 installed. Do any of the roms fix this problem?
So somehow the problem fixed itself. Dont know how as I didnt even touch my phone for two days. I just turned it on and -BOOM- it rang a few minutes later. Totally spontaneous issue. Really strange this phone is sometimes...
Boy, do I feel dumb.....Never even noted the un hi-lighted RING volume TAB...
I guess I can't use THAT excuse for not answering calls...
Thanks
Ron
I've been having the same problem. It's very baffling to say the least. I believe it was caused by the newer versions of S2U2. Don't know if it's been discussed in that thread or not. Both times this ringer 'glitch' has occurred, it's been when I've password protected S2U2 in settings. The issue was fixed by turning the password protection off, restarting S2U2, soft resetting my Fuze.
I am having the same problem with incoming calls not playing the ring tone and missing calls. I can guarantee you that the system/ring volume controls are at maximum. I have switched ring tones to no avail. It seems to have something to do with changing the ring type from ring to increasing ring and or visa versa. When I change ring type the problem exists. If I turn system/ring volume to silent and then back to maximum it plays the ring tone just fine. There is a bug in there somewhere! I also see a 'send text' lower left of screen and I hear a blurp sound or two in the background wihile the ringtone is playing when the phone is ringing. Anyone else have any issues like this? If so or you have a fix please send it to [email protected] I'm new to this forum stuff and don't really know how to use it. Hope I didn't break any rules.
Thank you,
Trent Alexander
I just have the callers complaining that I take too long to answer the phone. I called myself, and it took 3 1/2 rings for my Fuze to ring...anyone else?
Great PPC, Lousy Phone
Mine too. I just tried it and it does not ring until seven seconds after the light starts flashing. Not only that, it will not retain a custom ring tone. I try to use Old Phone 2 but it reverts to the default on its own.
My vario iv also suffers from the missing ring tone- reboots sometimes help but not always.
I too have had to learn not to rely on the alarm- goes off some days and then not on others.
Just now I thought that I would try to play an mp3 to see if that works- I pressed play and then waited for the track to start- no sound- seconds later the screen changed and touchflow launched itself (again) went back to the home tab and the sound is back?????
Same problem... it stopped ringing...
one thing I notice is that if the number calling is private or block it will only light up (no ring) but from a caller with Caller ID open the phone will ring...
strange...
Okay, so I got go sms, and I love the app so far, but, anytime I try to select a notification from "music", I notice it doesn't play when I test it, or receive a text, but when I preview it, it plays. I mentioned this several times in the go SMS thread, and two updates later, the issue still exists. Any ideas how to fix this, THANKS.
Sent from my rooted, JITed, X10, using my fingers, my eyes, one of my brain's four cores (Take that tegra 2), and Oh, the XDA app.
that's odd. mine doesn't even select the music. after i click OK it defaults back to current ringtone.
Same I also have the same both error ringtone back to default or ringtone in music dont work. And I thought there was something wrong with my SDcard because my ringtone was save in SDcard. It works fine after I send my ringtone to root/../notification sound. But sometimes the ringtone still goes missing, no ringtone just virbation.
Everything was fine until I realized I cant change my custom ringtone anymore. Whatever ringtone I set the custom one would ring even though it showed the other one is selected. So I deleted the ringtone and then was able to change it.
However only after a little while the phone just stopped ringing, the default tone seems to be silent and whatever I put it wont change. I put back my custom ringtone, rebooted, then deleted all the custom ringtones again and yet I am unable to get my phone to ring.
I have tried setting a ringtone through playerpro music player as well but to no avail.
The notification sound comes as normal. I am running stock unrooted 4.0.4. What should I do?
Figured out the problem. There were some specific contacts that did not have a ringtone assigned to them and my own second phone was one of them from which I was doing the testing. I was using a profile scheduler app previously and in that I had put some of the contacts on the whitelist to allow them to call me even on silent mode. So it was the app which was controlling those contacts and even after uninstalling it the settings hadnt defaulted.
I have searched through the Paranoid Android thread and have found nothing. My incoming call ringtone has suddenly stopped ringing. It is not on silent and vibration still works. The calls come through just no ring. i wiped cache/delvik and fixed permissions and nothing. I haven't wiped data and reflashed yet. I should also add that all the other ringtones work fine (notifications, alarms, etc..) Anyone else any ideas?
Thanks all in advance
EDIT: I just realized I have Gmail set up to silent and it still uses the default notification ringtone anyways.
EDIT 2: I flashed the newer version and it seems to work correctly so far. Not sure how to delete post
So the problem goes after you reflashed it.
So this just started a few days ago, I noticed that the notification sounds stopped working. Locking the phone stops making a sound and all notifications are silent. Watching videos and incoming calls are audible however.
A reboot fixes the issue, but it returns soon after.
I didn't install any new apps recently. Updated some, but nothing new.
Any ideas?
I have the exact same problem!