Alright I am lost.
I was using Rav's Rom with the KB3 radio, but I got bored. SO I tried out du5t3r's ROM with the KD1 radio he had at the bottom of his page. The data kept working, but I got bored with the ROM and flashed Supesop's 8.2 still running with the KD1 radio.
Here's where the radio/data issues start coming in. Supesop's ROM wouldn't get any data connection. At all. I even tried flashing the other radio images (KB1 and KB3), but both yielded the same results....no data.
So I tried flashing Inifinity's 1.1.0 ROM. This yielded a slightly different result. I get data (grey radio scale) but it never turns green....therefore I cannot download anything from the market nor will it connect to my gtalk. I flashed ALL three radios (Kb1 KB3 KD1), yet the results were all the same. Grey scale, never green.
I tried reflashing Rav's ROM...all three radios only yielded the grey data.
So now I am back to bu5t3r's rom with the KD1. It gives me the green bars, and I am fully connected...
But what was the matter with the other roms? I never had trouble with data and radio images until I flashed bu5t3rs ROM...And I have been flashing roms for a while, so I always went through the proper steps. And I never messed with the kernels with these ROMs either except with bu5t3rs (i flashed netarchy's). I am lost. Hmph.
Thoughts? Help?
Related
Well, here goes.
I've been reading alot for quite a while, and learning everything I could around this place. Thanks to tall who contribute.
I'm running NScollab, 1.0.42, with matrix 8.0 kernel.
Currently on the XXKB3 baseband.
Following this thread http://forum.xda-developers.com/showthread.php?t=1116884
I tried flashing the new KF1 radio for the nexus S. No luck. Either is doesn't flash at all ( status 6 error ) or when it does ( the signed version can be flashed in CWM ) no signal whatsoever. I've tried everything, changing the band, ( *#*#4636#*#* ) rebooting 45 times, dalvik wipe, changing type of radio, all guides, searched google, this website ( for a whole week ).
Nothing came up.
I'm posting, because this is pretty much last resort. I actually tried the KF1 radio on Miui, devnull, oxygen, and NScollab.
Telus users out there, what is your baseband ? What radio gives you the best signal and performance ? I know koodo switched to KF1, but I can't get it to work on my NS.
Any help is appreciated !
still noone ?
Darn.
wrick01 said:
still noone ?
Darn.
Click to expand...
Click to collapse
I use KB3 for koodo(telus). I get signal... and it works.
I'm curious as to whether KF1 would be a better radio for us, or if it even works for Telus/Koodo. Anybody know?
MC
1
xcoley said:
I'm curious as to whether KF1 would be a better radio for us, or if it even works for Telus/Koodo. Anybody know?MC
Click to expand...
Click to collapse
I have a Telus Nexus S in BC and I just installed an OTA update to 2.3.6 / GRK39F / I9020AUCKF1 and the KF1 radio seems to be working fine. I've been able to call around and MMS without issues so far. (about 2 hrs) Not enough time spent with it to tell you if it gets better reception or not...
I acutally installed the OTA pacakage in order to go back to stock as I was getting sick of the Search Bug that has been plaguing my phone for ages and I was going to bring it back for warranty work, but it appears the flash of the radio to KF1 that was included in the package has resolved the Search Bug!
Sweet! So, I might stick with this for a bit to confirm it is gone and and if all is well, I guess there's no need to return the phone for service!
I have the same issue on koodo. Flashed ICS and I get reception with KF1 downtown but barely anything at home and it used to be great.
I'm running the UCKF1 radio on my telus NS, on cm9 + matrix 14.5. With my phone, it was impossible to flash the radio with CWM, it would flash, but could not get on the network. I had to use fastboot to flash the radio.
In my experience, XXKB3 and XXKD1 were definitely the fastest radios (no upload cap), but my connection was unstable, needing occasional reboots to reestablish connection if I ever lost reception. UCKF1 has been rock solid for me. (I'm in the Toronto area)
Also, for some reason I only started getting the search bug with ICS and XXKD1, but UCKF1 fixed that.
Sent from my Nexus S using XDA App
Ok..I always try to figure it out by searching the forums...could not get there this time. I had Humbles rom on the phone...then I realized I should update my Baseband...so the mission starts.. I started on Basband ep3 on both the first and second lines..after reading it sounded like I needed to flash back to stock to get the update to ee4....I first deactivated voodo by adding the file directly ...reset phone then waited while the sexy voice said it was deactivated... then I flashed the stock rom...when I powered up the the phone on stock ...it did download the update...while installing the update it crashes and does not install correctly...so after messing around I re-flashed the stock rom and then downloaded the update again.....same thing happened.....then after reading some more I thought maybe my partitions where jacked so I flashed charge.pit ...now my phone wouldn't even show signs of life...stressing a bit ....I was able to flash Hummble 4.0 which brought my phone back to life...happy that it is working I'm now back where I originally started but now I'm on Ep1...even worse than before I started..lol
Does anyone have any ideas why it would not update? any help would be great!
Ep3 is the newest radio version. Ep1 is the second newest. And ee4 is the oldest. So you were really trying to unupdate. You are fine with the ep1 modems. But if you want to upgrade flash the ep3h radios through Odin.
Sent from my Gummy Charged GBE 2.1 using XDA App
Yep
I'm confused....thanks for the clarification.... I thought I had to go to stock to get any updates...whats with all the posts talking about that?
any quick link to where I could download the ep3 for odin? much appreciated
kmichaeld said:
any quick link to where I could download the ep3 for odin? much appreciated
Click to expand...
Click to collapse
Here ya go - EP3 Modem
The only reason you ever need to go back to stock is if you want to "unroot" your phone or to fix soft bricks. The baseband version corrosponds to the type of radios your phone is running (how you get your signal). And the radios are always independent of your ROM. Here's a short overview of the different radios from beginning to present.
ED1: Original charge modem. (sucked).
ED2: still sucks.
EE4: Latest official update for the droid charge. This is the radio that most Froyo Roms are based off of.
<I'm going to skip over a few because they are kind of non-existant now>
EP1Q: A leaked Gingerbread Radio. Significant improvements in signal strength.
EP1W: Improves upon EP1Q radio by handling data switching better. (A lot of Gingerbread ROMS are based off of this radio).
EP3H: The newest radio and probably the best. Some small improvements in data switching and got rid of occasional "popping" sounds from EP1W radio. Most of the newest ROMS use this radio as a base (Meaning they are optimized to use this radio).
Long story short, use the latest Radios. They always bring improvements. =)
I used the UCLD2 CWM leak, including the root and fb/sammy keyboard patch, then booted up. (I've tried this about 3 times now with same results)
It boots up, and I get texts/calls and bars but 3g/4G LTE is missing, and can not access anything involving data - it expects me to connect to WiFi.
My baseband says "Unknown" but to my understanding, that is expected.
I have also tried using the radios/modems available here in the Skyrocket's all-in-one stop thread.
Any suggestions?
Check APN settings?
Tried that, but I ended up loading up the Sky's UCLD2 rom. UCLD2 Radio worked fine with it.
Thanks for the help though.
Im on Seans SKY ICS. The latest leak. Its a great ROM. Mainly for me because everything seems to work properly with almost no FCs. My only problem with the rom is the modem/radio that came with it. I have terrible signal where I live. But after I installed everything, I litterally have to stand at the door/window to make/recieve phone calls. Some have reported good signal with the new radio, but not me. Everyone seems to report slower data speeds. So I decided to flash UCLD2 and see if it would help any at all. But no matter what I do the bandbase always says "unknown". Is it compatible with the new rom? I came from 2.3.6 with UCLA3. Now signal still sucked, but nowhere near as bad as UCLE2 that came with the leak. My steps were:
Reboot to recovery.
wipe cache
wipe D. cache
flash radio
reboot
fix permissions in rom manager
reboot to recovery again
fix permissions in advanced.
reboot system.
Ive done this 3 times....still refuses to work. What am I diong wrong?
Also, can I flash UCLA3 that came from gingerbread 2.3.6?
How about you try this: flash the new ucle rom from mohan his ics rom is compatible with a wide range of radios, go through each one one at a time until signal is sufficient for you maybe one will give you way better reception
So your saying maybe its the ROM that wont let me install UCLD2?
I've tried just about everything to flash a new version of the radio firmware on my 9020a. I've used the Radio Flashing Guide and tried every version available for the 9020a. Each time, the flash reports that it was successful, but no matter which one I choose, baseband still shows I'm running i9020aucke1 when I boot it back up.
I've also flashed the stock ICS OTA update 4.04 for the 9020a, thinking "well, THAT has to do it." but still I'm stuck on cke1.
Are there permissions that may be wrong? Is there anything else I can do? I want to flash a new radio because e1 is terrible for me. It won't switch between "3g" to "H" and just spins it's wheels and I get no data. Sometimes I get ZERO signal. If I reboot or switch Airplane Mode on & off, data comes back and works for a while, but then reverts back to working like crap.
Thanks a lot.
Update
I was trying to flash via Clockworkmod. I used ADB FASTBOOT and the radio is now on J1.
So, if Clockworkmod isn't working, use ADB FASTBOOT.
metalgeek said:
I've tried just about everything to flash a new version of the radio firmware on my 9020a. I've used the Radio Flashing Guide and tried every version available for the 9020a. Each time, the flash reports that it was successful, but no matter which one I choose, baseband still shows I'm running i9020aucke1 when I boot it back up.
I've also flashed the stock ICS OTA update 4.04 for the 9020a, thinking "well, THAT has to do it." but still I'm stuck on cke1.
Are there permissions that may be wrong? Is there anything else I can do? I want to flash a new radio because e1 is terrible for me. It won't switch between "3g" to "H" and just spins it's wheels and I get no data. Sometimes I get ZERO signal. If I reboot or switch Airplane Mode on & off, data comes back and works for a while, but then reverts back to working like crap.
Thanks a lot.
Click to expand...
Click to collapse
What recovery and what version are you using?